Availability
Summit Bucks
ACDelco DEXRON-VI automatic transmission fluid is the most recent release in the well-established DEXRON Series of automotive transmission fluids. It provides more consistent shift performance, even in extreme conditions, and degrades less over time. DEXRON-VI helps automatic transmissions last longer and perform better. Fully licensed and approved by GM, it is recommended for use in GM transmissions model year 2006 and newer calling for DEXRON-VI automatic transmission fluid (replaces DEXRON-III and DEXRON-II(E)), and recommended for any transmission that calls for DEXRON-VI, III, or II(E). ACDelco DEXRON-VI automatic transmission fluid is not for use in CVT (Continuously Variable Transmissions) or DCT (Dual Clutch Transmissions) that require specialized fluids. Features: * Good frictional characteristics and wear protection provide enhanced cold-temperature performance, excellent friction retention and smooth shifting. * High oxidation resistance fortifies against rust and corrosion and provides for longer fluid change intervals. * Wide range of seal compatibility – can be used in an extensive variety of vehicles/transmissions. * Meets requirements for foam protection and protects against metal-to-metal friction and wear within the transmission.
( 77 )
$34.99
—
$36.99
Summit Bucks
Forged in the fires of high performance engines, Fel-Pro Performance head gaskets are quite literally created to tame the fiery combustion chambers of up to 1,000 hp engines. Reinforced with KEVLAR® fiber and engineered to give you a perfect seal that can withstand combustion pressures of 1,500 to 3,000 psi, these gaskets are bred for high performance. They have a conformable anti-stick coating—and are constructed with pre-flattened copper or steel rings for easy installation, while also giving them the strength to tame your beastly powerplant. The anti-stick coating ensures easy removal and cleanup on frequent rebuilds, but also aids in micro-sealing minor surface irregularities. When rebuilding your engine, use the parts you wish were in it to begin with. Put a set of Fel-Pro Performance head gaskets in that engine—not only to help it perform better today, but to make your next engine project that much easier.
( 633 )
$21.99
—
$59.99
Summit Bucks
For assured protection in your GM dual-clutch transmission, use ACDelco FFL-4 DCT automatic transmission fluid. This synthetic blend has been rigorously tested against an extended version of the ATSM 130 copper corrosion test. It's designed to meet GM performance specs for friction reduction, temperature control stability, and high cleanliness levels.
( 21 )
$27.99
Summit Bucks
Most Fel-Pro Performance intake manifold gaskets have Printoseal construction, which puts beads of special elastomers around the ports for extra sealing power. They also feature a non-metallic, rubber-fiber base material that resists gasoline and alcohol—and they allow engine builders to precision-trim around the intake ports. These replacement gaskets are available in a variety of materials, thicknesses, and port configurations. Order the set recommended for your vehicle year/make and engine application.
( 1287 )
$20.99
—
$53.99
Summit Bucks
It's easy to diagnose worn-out oil pan gaskets--just follow the trail of black drips on your clean cement. Fel-Pro offers hundreds of OEM-style replacements to fit a wide range of auto, truck, marine, industrial, and agricultural applications. Many are one-piece units, while others are multi-piece with kit accessories. Depending on your vehicle, the oil pan gaskets could be constructed of molded rubber, cork and neoprene, PermaDryPlus, or rubber-coated fiber or steel core. Match up your specs to the Fel-Pro gasket needed to seal off oil leaks.
( 988 )
$20.99
—
$74.99
Summit Bucks
Fel-Pro Performance valve cover gaskets are an excellent choice for engines, especially those that produce high horsepower. Fel-Pro performance valve cover gaskets are available in many materials for a variety of applications and needs. When your engine needs new gaskets, look no further than Fel-Pro performance gaskets for the best sealing power.
( 475 )
$20.99
—
$61.99
Summit Bucks
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 540 )
$20.99
—
$62.99
Summit Bucks
Fel-Pro Performance oil pan gaskets offer three types of construction. Some are made from Felcoid/Plus, a special fiber core with a latex rubber coating. For applications where a tougher seal is needed, they have solid steel core gaskets wrapped with rubber-coated fiber facing material. And for newer engines, there are one-piece molded silicone-rubber gaskets specifically designed to handle their special needs. Some of these gaskets have a solid steel core, while others have a rigid carrier-type design. Fel-Pro oil pan gaskets come with an anti-stick treatment for easy removal. Order the replacements recommended for your year/make and engine family.
( 409 )
$20.99
—
$49.99
Summit Bucks
Fel-Pro's PermaDryPlus valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the gasket to resist being sucked in under high vacuum or blown out when under pressure. At the same time, it also prevents over-tightening of the mounting bolts. Note, however, that these gaskets are not intended for race applications.
( 251 )
$20.99
—
$57.99
Summit Bucks
Fel-Pro Performance gaskets are an ideal choice for the vast majority of racing and street performance engines. They're available in a broad array of bore sizes, thicknesses, and material options to meet any need for virtually every popular performance engine design. Whether you've got a professional racing engine or a Saturday evening cruiser—Fel-Pro Performance gaskets deliver reliable sealing of combustion pressure, coolant, and oil under the toughest conditions! Order the gaskets designed to fit your application. Product features: * High-density fiber facing material attached to both sides of a perforated steel core * Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets * Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service * Meets or exceeds all original equipment specifications * Application-specific design to ensure a perfect fit
( 495 )
$20.99
—
$49.99
Summit Bucks
Certain engines, such as small block and big block Chevys, can produce high-vacuum or blowout conditions that can be big problems for many valve cover gaskets. Fel-Pro Performance CorkLam gaskets are designed to deal with those challenges. They have a metal core for extra strength, with a special cork-and-rubber compound bonded to both sides. This produces tough gaskets that can deal with problem engines, while also providing a little extra clearance between the valve cover and the valvetrain.
( 258 )
$44.99
—
$51.99
Summit Bucks
Fel-Pro headbolt kits contain a complete set of the highest quality headbolts and hardened washers available. They're cold-formed to ensure molecular integrity, then heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate cylinder head re-torquing. The bolts are available in a variety of head styles for fitment on specific vehicle and cylinder head applications.
( 216 )
$22.99
—
$60.99
Summit Bucks
Fel-Pro PermaTorque MLS head gaskets provide the robust seal needed to contain peak combustion pressures and temperatures—and to withstand the significant casting motion encountered in many of today's automotive engines. The gaskets feature multiple layers of steel, precisely engineered sealing beads, and advanced polymer coatings to maintain a proper contact pressure between the cylinder head and block. Unlike other multi-layer steel head gaskets, PermaTorque MLS seals also include a proprietary blue aftermarket coating that accommodates a wider range of surface finishes. These gaskets are manufactured using precision tooling to ensure exact sealing bead location and profile. Order the model recommended for your specific vehicle and engine application.
( 86 )
$20.99
—
$66.99
Summit Bucks
Specifically designed for diesel engines, ACDelco diesel exhaust fluid is the primary component used to help convert an environmental pollutant into harmless nitrogen and water. It's a mixture of 32.5 percent high-purity synthetic urea and 67.5 percent deionized water. This additive is stable, colorless, non-flammable, and non-toxic.
( 58 )
$21.99
Summit Bucks
Fel-Pro rear main seal cover gaskets are designed to fit between the engine block and rear main seal cover. They are manufactured from quality materials and install in the factory location to ensure a direct fit.
( 38 )
$26.99
Summit Bucks
Fel-Pro Performance main bearing seals are made of high-grade materials, such as silicone, polyacrylate, or fluoroelastomer. Race engine builders prefer these premium seals for their severe-duty needs.
( 190 )
$21.99
—
$49.99
Summit Bucks
ACDelco GM Genuine Parts timing cover seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These true OE parts give you the peace of mind that the fit, form, and function will be just as expected. Stay with the parts brand your GM vehicle came with and get the quality you know and trust with ACDelco GM Genuine Parts.
( 26 )
$28.99
—
$35.99
Summit Bucks
Fel-Pro PermaTorque head gaskets are the industry standard for no-retorque designs available today. The torque retention is gained through premium materials comprising four distinct components--core, facing, coating, and armor--and the process used in the manufacture of the gaskets. Fel-Pro PermaTorque head gaskets have been proven to retain the highest torque retention significantly better than other brands. These composite-style gaskets compress at installation to conform to and seal minor surface imperfections, while retaining the ability to resist or recover from compression during engine operation. The result is a clamping force and a secure seal over a long period of time--without retorquing.
( 42 )
$20.99
—
$61.99
Summit Bucks
Fel-Pro PermaDry valve cover gaskets are recommended for stock replacement use. Their shape, thickness, and construction varies with each engine application. In addition to tried-and-true materials such as cork and rubber, advances in gasket technology have also been incorporated into molded silicone seals for leak-free performance. Simply match up your vehicle's make and model year with the Fel-Pro PermaDry valve cover gaskets designed for precise fitment. Note that these gaskets are not intended for race applications.
( 379 )
$20.99
—
$62.99
Summit Bucks
ACDelco offers engine timing covers for a variety of cars, trucks, vans, and SUVs. The aluminum replacements are available in different configurations for factory-style fitment. Some models also include gaskets and hardware. These parts are designed, engineered, and tested to rigorous standards—backed by General Motors. Order the OE direct-fit timing cover recommended for your vehicle.
( 3 )
$45.99
Summit Bucks
If you have a vehicle that requires a valley pan gasket and your gasket kit didn't include it, Fel-Pro Performance valley pan gaskets are just what you need.
( 81 )
$35.99
—
$36.99
Summit Bucks
Fel-Pro intake manifold gaskets are designed to be replacements for stock-type intake gaskets. This means they're ideal for stock rebuilds, as well as mild performance engines. The seals are available in a variety of configurations for fitment on hundreds of engine applications.
( 495 )
$20.99
—
$62.99
Summit Bucks
ACDelco Dex-Cool antifreeze will keep your vehicle running at optimal temperatures. Extend the life of your water pump and other key systems by using a high-quality antifreeze from ACDelco.
( 24 )
$21.99
Summit Bucks
Moog replacement tie rod ends are designed as OE replacements for your stock units. Moog replacement tie rod ends feature durable, all-metal construction that is not prone to failure like OE plastic tie rod ends. Since Moog replacement tie rod ends are greasable (except where noted), friction is reduced and contaminants are flushed out. Plus, they have an easy-access wrench flat that allows for the use of a socket for easy installation.
( 793 )
$20.99
—
$56.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
