Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
47 Results Found For "controller"
Showing In Stock Items. Show All 55 Items.
On Sale
REDARC Tow-Pro Brake Controller Harnesses
REDARC Tow-Pro brake controller harnesses provide easy plug-and-play installation of REDARC electric trailer brake controllers. They currently offer a selection of harnesses that will cover a variety of vehicle models. The harnesses include fitting instructions and the loom with compatible connector.
( 6 )
$27.00
—
$35.00
$22.95
—
$29.75
On Sale
Holley Terminator X and X MAX Engine Control Module Wiring Harnesses
Holley's Terminator X and Terminator X Max ECUs give you complete control of your engine, self-learning fuel strategies, and the race-winning technology of Holley EFI at a budget-friendly price. When you need to service your system, Holley has the components that will fit and perform as expected. Holley Terminator X/X Max engine control module wiring harnesses allow you to access the inputs and outputs built into the Terminator X or Terminator X Max ECU. These harnesses have all eight pins populated, four inputs and four outputs. Features: * 36 in. flying leads * Pre-terminated at ECU connector * Eight wires * Sealed connector
( 2 )
$40.48
$36.43
On Sale
Scott Drake Upper Control Arm Grease Fitting Kits
Scott Drake upper control arm grease fitting kits can help to quiet front end noises and ensure that all threads on the shaft remain lubed. The 90 degree grease fittings are designed for easier installation, as they don't run into the shock tower. These zerk fittings help extend the life of your control arms, since they can now be greased easily. They're available as a set of fittings or in a kit with extensions and installation tool included. Eliminate squeaky upper control arms with help from Scott Drake grease fittings.
( 12 )
$24.34
$21.91
On Sale
AEM Electronics Replacement Wideband UEGO Controller Air/Fuel Ratio Gauge Components
AEM Electronics Wideband UEGO Controller Air/Fuel ratio gauge components are designed to be used with AEM wideband UEGO controller air/fuel ratio gauges. Whether you need to replace your sensor or cable, these parts will help you to get your gauge back in working order.
( 23 )
$41.29
$37.16
On Sale
Hurst Roll Control Button Switches
Hurst Roll Control button switches have the edge with a microswitch and cords. These switches deliver immediate and accurate releases with a capacity of 10 amps. The included wire makes installation hookup a snap.
( 19 )
$51.19
$46.07
On Sale
Brothers Trucks C/K Series Interior Bezels
Brothers Trucks C/K interior bezels have a quality construction for long-lasting durability and good looks, and factory mounting points provide an easy installation. When it comes to a restoration project, the body and exterior are only half of the equation. To complete the job, you will also need to finish the interior as well. Brothers Trucks offers a wide range of parts and accessories to help restore your C/K truck to its majestic glory.
Not Yet Reviewed
$46.87
$38.08
On Sale
Nitrous Outlet ProMax Display Screen Rigid Mounting Brackets
Nitrous Outlet offers rigid mounting brackets for its ProMax Display Screen. The brackets are CNC-machined from 6061 billet aluminum and then black anodized for long-lasting good looks. Four countersunk holes have been added for a bar mount or custom mount application. The screen then simply slides into the mount and the four tabs lock into the recesses of the screen for a secure fit. Once in, the display screen won't be going anywhere!
Not Yet Reviewed
$41.99
$33.59
On Sale
Summit Racing™ Reproduction Wiring Harnesses
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 62 )
$24.99
—
$55.99
$21.24
—
$47.59
On Sale
Holley Manual Choke Control Cables
Holley manual choke control cables are ideal components for completing your choke conversion kit or replacing a faulty original. These cables will also work on all Holley manual choke carburetors (like the double pumpers) or any other manual choke carburetor. Well-built and affordable—the value you receive with each Holley part.
( 30 )
$36.54
$32.89
On Sale
Holley Choke Control Cable Mounting Brackets
Holley choke control cable mounting brackets are designed to hold your manual choke cable. They are made of steel and feature a gold iridited finish for durability. The brackets are available for specific models of Holley carburetors or a universal underdash mount.
( 9 )
$39.08
$35.17
On Sale
Mr. Gasket High Performance Thermostats
Mr. Gasket high-performance thermostats are designed to resist large variations in coolant pressures that can occur at high rpms. Under these conditions, coolant temperature and pressure fight for control of the thermostat, keeping it from opening at its designed temperature. These balanced high-performance thermostats have brass-and-copper construction, and open at the right temperature regardless of engine rpm.
( 236 )
$29.11
—
$32.25
$22.38
—
$29.03
On Sale
Holley Accelerator Pump Cams
Holley accelerator pump cams will allow you to "tailor" accelerator pump performance to your engine's actual requirements. They include cams that have a different shape or profile to give different results. Cam "lift" directly affects the accelerator pump stroke, and, therefore, pump capacity. Ramp profile or shape controls the "timing" of the shot. A steeply-rising ramp shape will give a fast, heavy fuel shot right off idle. Conversely, a gently sloping ramp will spread the pump action over a longer period of time.
( 33 )
$48.74
$43.87
On Sale
Holley Carburetor Float Kits
Holley carburetor float kits work with side-hung and center-hung Demon and aftermarket Holley carburetor floats, as well as many OE Holley, Ford, Chrysler, GM, Motorcraft, AMC, and Rochester marine carburetors. Offered in brass and Nitrophyl for internally and externally adjustable floats, they're available as primary floats, secondary floats, and secondary floats with notches that include jet extensions. Holley's wedged floats feature a reinforced float bracket assembly that allows more fuel to flow through the bracket—especially when using bottom-feed needles and seats. Technical notes for Holley carburetor float kits: * Wedged floats are designed for oval track use, so the float stays open in turns * The use of brass floats on the secondary side of Model 4160 carburetors factory-equipped with Nitrophyl floats may result in loss of fuel control and flooding if the floats contact the metering plate * You should only install jet extensions and notched floats in rear fuel bowls
( 109 )
$30.43
—
$51.19
$27.39
—
$46.07
On Sale
Scott Drake Coil Spring Seats
Scott Drake coil spring seats bolt to the upper control arm and support the bottom of the coil spring. They are manufactured from stamped steel--and use durable bushings and anti-squeak protector pads.
( 48 )
$40.20
$36.18
On Sale
MSD Digital-6 Replacement Wiring Harnesses
MSD Digital-6 replacement wiring harnesses will provide the quality and performance matched only by the originals. You can trust MSD to provide premium replacement parts and wiring for their ignition controls and your build. Whether you're freshening your car, or have a wiring harness with one too many splices, replace them with original components from MSD.
( 13 )
$33.73
$30.36
On Sale
Holley Sniper MAP Sensors
The pressure inside the intake manifold is an extremely important input to the engine control unit. Holley Sniper MAP sensors respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from 1-5 volts. These replacement sensors will handle applications up to 25 lbs. of boost. Additional notes: * Utilizes stock attaching points * Sensor monitors manifold vacuum, varying output voltage to the ECU as a function of load placed on the engine—providing necessary data to control fuel enrichment
( 3 )
$36.54
$32.89
On Sale
Holley Sniper 2 EFI Input/Output Wiring Harnesses
Holley Sniper 2 EFI input/output wiring harnesses give you access to two ground trigger inputs, two ground trigger outputs, the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things such as AC Kick and nitrous stage activation. The output grounds can be used for electronic fan control, or A/C shutdown at WOT. This harness includes an additional 0-5 V TPS output commonly used for transmission control units, and a tach output wire to drive most common aftermarket tachometers. Additional details: * Wires come individually labeled for easy identification * 4 x 5 ft. long output wires * 2 x 5 ft. long input wires
( 5 )
$45.97
$41.37
On Sale
K&N Universal Performance Air Filters
K&N's universal performance air filters are designed and manufactured for a wide variety of applications, including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and more. Many hundreds of models are are available, so regardless of the angle or offset diameter of your air intake, there is likely a K&N universal air filter for your equipment. All filters are constructed with ultra-strong, molded, pliable rubber flanges, which absorb vibration, allow for secure attachment, and can be stretched for up to 1/16 in. (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable. Order the style and size that best suits your needs.
( 311 )
$41.99
—
$57.99
$33.59
—
$46.39
On Sale
Holley EFI Tach Input Ignition Adapters
Holley EFI tachometer input ignition adapters are for applications using a CD Box, such as an MSD 6AL, while not using timing control. They're designed for use with Sniper 2 EFI systems and external ignition control boxes with tachometer signal output. Not for direct connection to coil.
Not Yet Reviewed
$28.71
$25.84
On Sale
K&N Cabin Air Filters
K&N cabin air filters are replacement upgrades for your vehicle's stock cabin filters with a reusable design that cleans and freshens incoming air. They're electrostatically charged to grab and hold dust particles. These advanced filters help control odors by capturing most mold, mildew, fungus, spores, bacteria, and germs. Best of all, whenever the cabin air filters get dirty, you can simply clean them off and reinstall them in your vehicle.
( 81 )
$47.99
—
$57.99
$38.39
—
$46.39
On Sale
Seals-it Economy Axle Seals
Finally, affordable Seals-it economy axle seals! Seals-it is offering weekend racers their race-winning technology in budget-friendly axle seals. All their seals must pass an extensive testing and quality control and these economy axle seals are no different. They will provide high-quality, better performance, and peace of mind race after race. There is only one place you can get Seals-it quality and now you can get their first class quality for less to keep you and your budget on track!
( 14 )
$32.99
—
$49.99
$29.69
—
$44.99
On Sale
MSD Adjustable Low RPM Modules
MSD adjustable low-rpm modules allow you to select any rpm between 1,000 and 3,000 by simply turning a knob. They're ideal for vehicles with automatic transmissions that are using the MSD 2-step module to leave the starting line below 3,000 rpm. They plug directly into the rpm module receptacle on the 2-step module selector, and can also be used on MSD's Soft Touch rev controls, rpm-activated switch, and shift light.
( 8 )
$54.05
$48.65
On Sale
REDARC Tow-Pro Mounting Kits
REDARC Tow-Pro mounting kits simplify the installation of the Tow-Pro Elite electric trailer brake controller main unit under the dash of the vehicle. The bracket is designed to be fastened to the main unit with two M4 bolts—either at right angles, inline, or diagonally across the main unit. It also features an M6 slot and nut/bolt, allowing connection to the vehicle on a suitable M6 stud or M6 hole. The bracket material is rigid to support the main unit, but can still be bent should the installation require it.
Not Yet Reviewed
$30.00
$25.50
On Sale
Milwaukee Dead Blow Hammers
The Milwaukee dead blow hammers provide maximum impact and the most durable handle. The dead blow delivers the highest impact with minimal effort when swinging. The hammers have a steel reinforced handle core, and the durable handle is also resistant to peeling when exposed to solvents. The dead blow hammer's precision balanced design, paired with the overmold handle and anti-slip grip offers more control when swinging the hammer. Milwaukee's' dead blow hammers are available in a choice of several models with different head weights. Select the dead blow hammer model best suited to your specific needs. Tool features and benefits: * Available in 28 oz. head weight with 10 in. long handle—or a 48 oz. head weight model with 11 in. long handle * High-impact optimized handle * Precision balanced design * Most durable steel reinforced handle * Overmold handle for greater comfort and grip * Handle grip is resistant to peeling when exposed to solvents * Backed by Milwaukee Tools Lifetime Guarantee
( 1 )
$29.97
$24.97
