Availability
Showing In Stock Items. Show All 29 Items.
Can't get the bolt holes on your exhaust manifolds to match up with the bolt holes on your cylinder heads? Performance Tool exhaust manifold spreader can help. Simply place the spreader between the manifold flanges and adjust the spreader length using an open end wrench. Once the spreader has aligned the bolt holes, bolt down your manifold, and you're done. Buy two, and make the job even easier!
( 3 )
$21.99
Summit Bucks
The leading cause of solenoid failure is an inability to maintain an internal mechanical seal, resulting in a multitude of drivability concerns. Since it is not an electrical failure, it can be difficult to evaluate whether a solenoid is the cause of a particular problem. Sonnax solenoid test manifold kit allows quick, easy, cost-effective pass or fail verification of the solenoid's internal sealing integrity, taking the guess work out of replacing solenoids.
( 1 )
$40.99
VIAIR multi-port manifolds feature six 1/4 in. NPT female ports to allow extra ports to be added onto any onboard air system. They can be used to connect compressors, air lockers, and other pneumatic items. They are anodized black and will simplify the expansion of your existing OBA system.
( 7 )
$23.40
FJC manifold gauge conversion kits help you to upgrade your current gauge sets to connect with a different mobile A/C system. Available to convert R12 gauges to R134a or to convert R12/R134a gauges to R1234yf. They include high-and low-side manual or quick couplers. Some kits may include fittings and additional items. Choose the FJC conversion kit needed.
Not Yet Reviewed
$24.99
—
$33.99
Summit Racing™ engine lift plates allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as manifold covers when you store your engine.
( 174 )
$29.99
Performance Tool air tank repair kits refresh your air compressor--or fix small problems. They include a new pressure gauge, air tank manifold, and a section of hose.
( 25 )
$28.99
Proform's new steel lift plates fit most Holley 2-barrels and 4-barrels as well as the Dominator.
( 13 )
$22.99
Heli-Coil has the most effective and universally accepted method of thread repair. Heli-Coil inserts work in any part or material--aluminum, magnesium, cast iron, bronze, etc. Damaged threads can be restored to better-than-new condition in spark plug ports, carburetor fuel inlets, transmission housings, oil drain plugs, exhaust and intake manifolds, head bolt holes, brake calipers, and more. They are available in many sizes.
( 108 )
$22.99
—
$50.99
Lisle torque angle meters, also called "angle wrenches," are for most torque-to-yield fastener applications. They're commonly used for tightening head bolts and other bolts where a torque angle is required, are convenient to use, and easy to operate. Lisle torque angle meters have a flexible clamp that keeps the angle meter from rotating. It attaches easily to fixed objects, in any position, such as cylinder heads, intake manifolds, exhaust manifolds, or engine blocks, and is to be used with a 1/2 in. drive.
( 23 )
$38.99
Lisle carbide gasket scrapers will clean up! Their precision-ground tungsten carbide tips will remove gasket residue, along with carbon build-up and rust. They are attached to steel blades that are molded into comfortable 6 in. long handles. They are available individually in two widths or together in a set. Clean your steel or aluminum heads and manifolds, your disc brake caliper slides with Lisle carbide gasket scrapers.
( 4 )
$22.99
—
$39.99
Tires perform best when they're set at a pressure that's appropriate for the terrain. While highway use calls for relatively high pressures, lowering air pressure will dramatically improve traction in a range of off-road environments. Equally beneficial is the ability to re-inflate tires, including tires that have been repaired; punctures aren't unusual in extreme off-road conditions. In such environments, the value of owning an air compressor is priceless. ARB Air Systems supplements its line of air compressors with complete vehicle-specific solutions for enthusiasts looking to equip their vehicles with compressors and accessories. The product range includes items such as air fittings, manifold kits, braided stainless steel PTFE hoses, forged aluminum air tanks, and air chuck mounting solutions. Together, these provide the necessary components to fit a complete air compressor system to a 4WD, allowing a vehicle to be outfitted front to back with on-demand air. ARB also offers a full range of replacement parts and compressor components along with a variety of tire inflators and inflation kits. When coupled with good-quality tire repair equipment, ARB air compressor components and accessories provide the off-road traveler with independence and peace of mind.
( 10 )
$23.00
—
$40.95
Summit Racing™ ferrous burrs are ideal for porting manifolds and cylinder heads, or for deburring and smoothing any iron material. The burrs are designed for fast and easy chip removal with minimal tool loading.
( 14 )
$39.99
—
$42.99
Clean up with Trick Flow® cylinder head porting tools. These tools are essential for cleaning up ports, combustion chambers, and port-matching intake manifolds or cylinder heads at home. They offer scribe tools to single-cut and double-cut carbide burrs to grinding wax and blue layout fluid. You can turn out race-winning components with the help of Trick Flow® porting tools.
( 3 )
$31.99
—
$32.99
Remove studs from engine blocks, exhaust manifolds, cylinder heads, and more with Lisle stud removers. These unique tools are designed to grab studs broken off very close to the mounting surface.
( 13 )
$30.99
—
$32.99
Air Lift SMC water traps are a great way to keep condensation and moisture from building up in air compressor lines, tanks, manifolds, and air bags. Made from quality materials, these SMC water traps are available in a range of NPT inlet/outlet sizes. Order the model designed to fit your application.
Not Yet Reviewed
$39.99
On Sale
Mr. Gasket engine lift plates are designed for use with 2-barrel and 4-barrel manifolds. These steel plates feature bolt-on construction and a durable gold iridited finish.
( 31 )
$37.80
$20.79
Moroso engine lift plates will allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as a manifold cover when you store your engine. These lift plates fit most 4-barrel intake manifolds.
( 4 )
$51.99
Clearance
Sierra Marine universal engine pullers will fit 2- and 4-barrel manifolds. These lift plates are manufactured from heavy-duty steel and finished with a durable and bright red powdercoat. Sierra Marine universal engine pullers will assist in making your engine rebuild or swap easier.
( 1 )
$98.99
$43.50
Slam Specialties air filters are designed to be used as a supplement to existing compressor water trap filters. This fitting prevents debris from entering the system from the tank. These filter elements are designed to thread inline between your air tank and valve manifold setup.
Not Yet Reviewed
$28.91
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
