Availability
Showing In Stock Items. Show All 34 Items.
When you turn the key and your vehicle is slow to turn over—or worse, there's no ignition at all—one of the prime suspects is a faulty starter. Getting the engine up and running for each drive begins with this unit, so it's wise to trust your replacement parts to ACDelco. The aftermarket parts giant manufactures starters to precise OE specifications for perfect fit and performance on virtually any vehicle on the road today. Don't wait until a weak, aging starter fails completely; install an ACDelco product …and turn the key with confidence!
( 218 )
$40.99
—
$44.99
ACDelco remanufactured starters are 100 percent performance-tested to ensure the ability to start your engine. They're engineered to fit your vehicle and built to provide the same performance, durability, and service life you've come to expect—at a great value! Damaged and obsolete parts are replaced, and the units receive 100 percent new bearings, bushings, and brushes for the ultimate in reliability. Over a thousand models are available; order the starter recommended for your vehicle. Don't wait until a weak, aging starter fails completely; install an ACDelco product … and turn the key with confidence!
( 54 )
$36.99
—
$49.99
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$20.99
—
$48.99
Motorcraft camshaft position sensors will accurately determine the rotational speed of your camshaft. These high-quality, direct-fit OE replacements ensure lasting durability and reliable performance—even under extreme conditions. When you need replacements for your Ford, Lincoln, or Mercury, Motorcraft sensors offer the right fit and function at competitive pricing.
( 1 )
$35.99
—
$45.99
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$20.99
—
$48.99
Motorcraft engine crankshaft position sensors will accurately determine the rotational speed of your crankshaft. These high-quality, direct-fit OE replacements ensure lasting durability and reliable performance--even under extreme conditions. When you need replacements for your Ford, Lincoln, or Mercury, Motorcraft sensors offer the right fit and function at competitive pricing.
( 1 )
$44.99
FAST TPS adapter harnesses relay throttle opening/closing information to the system's ECU by plugging into the throttle blade shaft. They're made of high-resistance material and have a rotator for accurate throttle position measurement. Models are available for Chevy LS or early-to-late GM TPS applications.
( 6 )
$20.95
Innovate EGT band clamps help you securely attach sensors that measure exhaust gas temperature to your exhaust pipe. These components are hose clamp-style sensor mounts for standard EGT sensors. The EGT band clamps feature a tapered cone that minimizes possible exhaust leaks at sensor entrance. The square clamp saddle prevents sensor rotation and the clamp dimples allow for pipe expansion due to extreme exhaust temperatures. The lower profile allows installation in confined areas and the brass body/ferrule can tolerate multiple installations for use time and time again. For secure connections, choose EGT band clamps from Innovate.
( 1 )
$22.99
FAST throttle position sensors are designed to bolt onto the throttle blade shaft and relay throttle opening/closing information to the system ECU. These throttle position sensors are constructed from highly conductive, plastic-resistance material with a "sensitive" rotator for accurate throttle position measurement.
( 4 )
$49.95
Powermaster Infi-Clock starter adapters offer beautifully machined aluminum blocks with 360 degrees of rotation. This allows you adjustable mounting of your Powermaster starters to clear most oil pans and headers.
( 5 )
$34.99
The crankshaft position sensor is an electronic device that monitors the position and/or rotational speed of the crankshaft, then communicates with the vehicle's ECU to control ignition timing and fuel injection parameters. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts crankshaft position Sensor line has superior coverage for domestic and import applications.
( 1 )
$20.50
—
$49.99
ACDelco GM Genuine Parts camshaft position sensors are a GM recommended replacement ideal for many vehicles on the road today. They monitor the rotational position of the camshaft(s). These sensors provide a signal to the engine control module, which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. GM Genuine Parts camshaft position sensors have been manufactured to provide you with the performance, durability, and service life you expect from General Motors.
( 11 )
$21.99
—
$37.99
URO Parts offers ABS speed sensors for countless import vehicles. The wheel speed sensors are a type of tachometer that measures the rotational speed of a wheel and passes it to your car's engine control module. These replacements are made from high-quality materials to resist heat and ozone, maximizing durability and vibration absorption. Their OE-style design supports factory anti-lock brake sensor function. Fitment is guaranteed, backed by a 24-month unlimited mileage warranty from URO. Order the model recommended for your application.
Not Yet Reviewed
$20.99
—
$37.99
Clearance
Astemo offers vehicle speed sensors for a wide range of vehicles, particularly many import models. These stock replacements are built to OEM specifications for performance and longevity. The speed sensor detects a gear or target wheel in the automatic transmission and generates an electric digital signal proportional to the speed of rotation. The transmission controls use this information to modify various transmission functions such as shift points and perform diagnostic tests. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the vehicle speed sensor model recommended for your application.
Not Yet Reviewed
$57.99
$46.50
ACDelco GM Genuine Parts ABS wheel speed sensors are located at each wheel, monitoring the rotation of each wheel, and are GM-recommended replacements for your vehicle's original components. The sensor provides this speed information to the antilock brake control module for the antilock braking function. These sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Not Yet Reviewed
$24.99
—
$36.99
Your vehicle's engine crankshaft position sensor reports the precise location of the crank to the Powertrain Control Module (PCM) to determine engine mechanical operation, as well as possible cylinder misfire. NTK camshaft position sensors are manufactured to operational performance standards to meet or exceed OE fit, form, and function, ensuring proper position and/or rotating speed of the engine's crankshaft. They undergo extreme testing conditions that include thermal shock, vibration, and OBD verification. They feature sealed connections to prevent leaks, environmental corrosion, and performance issues. O-rings and seals are included where applicable, and they are backed by a 3 year/36,000-mile warranty. Select the NTK crankshaft position sensor needed for your vehicle.
Not Yet Reviewed
$48.99
Denso camshaft positioning sensors detect camshaft rotation during the engine-combustion cycle. Denso produces both magnetic resistant element (MRE) type and magnetic pick-up (MPU) type sensors. Features and benefits of Denso camshaft positioning sensors include: * Denso MRE sensors have a pair of MREs on an integrated circuit (IC) chip; this unique design is extremely accurate, even just after an engine is started * The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the camshaft--this design is almost 10 times more sensitive than Hall element type sensors * Denso uses a polyphenylene sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil, and emission byproducts
Not Yet Reviewed
$20.99
—
$46.99
Clearance
Denso crankshaft positioning sensors detect crankshaft rotation during the engine-combustion cycle. Denso produces both magnetic resistant element (MRE) type and magnetic pick-up (MPU) type sensors. Features and benefits of Denso crankshaft positioning sensors include: * Denso MRE sensors have a pair of MREs on an integrated circuit (IC) chip; this unique design is extremely accurate, even just after an engine is started * The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the crankshaft--a design almost 10 times more sensitive than Hall element type sensors * Denso uses a polyphenylene sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil, and emission byproducts
Not Yet Reviewed
$34.99
$20.99
—
$41.99
Anti-lock braking system speed sensors play a vital role in the safety and maneuverability of your vehicle. NGK ABS speed sensors will accurately monitor rotational speed for anti-lock brake function, stability control, and traction control. The connectors, mounts, and wire lengths are an exact match to OE for worry-free installation. Grease, mounting nut, and instruction sheet are included where applicable. Select one(s) designed for your vehicle.
( 1 )
$25.99
—
$35.99
A wheel speed sensor tone ring is an integral part of your vehicle's ABS (anti-lock braking system). The toothed tone ring detects the rotational speed of the wheel by sending electrical pulses as the teeth pass by the sensor, allowing the ABS to monitor and control wheel speed when braking, preventing wheel lockup. Standard Motor ABS wheel speed sensor tone rings are quality-engineered, direct OE-match replacements, providing the proper fit, form, and function to restore your ABS system to an optimum level of operation. Replace failed or corroded OE rings with ones from Standard. Select the tone ring needed for your vehicle.
Not Yet Reviewed
$24.99
Rein Automotive OE crankshaft position sensors are manufactured to factory specifications ensuring proper fit, form, and function. They are used to measure the position or rotational speed of the crankshaft. Your vehicle uses the information sent from the sensor to the ECU to determine the optimal fuel injection and regulate the ignition. Rein Automotive quality crankshaft sensors aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE-quality component.
Not Yet Reviewed
$20.99
—
$21.99
Astemo offers replacement ABS wheel speed sensors for a wide range of import vehicles. An anti-lock brake sensor is a type of tachometer that measures the rotational speed of a wheel and passes it to the car's engine control module (ECM). Since all the wheels do not turn at the same speed, ABS sensors report the speeds of all four wheels to the ECM, based on which the ECM determines if the wheels are locking up. Order the model recommended for your application.
Not Yet Reviewed
$24.99
—
$49.99
Sierra Marine offers electrical switches for a broad range of functions. They're available in different sizes and styles, such as toggle, push-button, and rocker—some with illumination. Economical and attractive, these well-built switches are ideal for replacement purposes or to add new functions to your watercraft or vehicle. Order the models and quantity needed for your application.
( 4 )
$22.99
—
$30.99
Clearance
Don't take chances with old, questionable, or malfunctioning ignition lock cylinders that can leave you stranded. Dorman replacement ignition lock cylinders and keys are designed to exceed OEM specifications for reliable, maintenance-free operation.
( 13 )
$41.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
