Availability
Showing In Stock Items. Show All 165 Items.
Caspers Electronics sealed 12 V to 5 V converter modules are designed to facilitate converting a 12 V feed into a 5 V output. They are especially useful when adding things like pressure transducers, MAP sensors, TPS sensors, or any other 5 V powered items to your existing wiring. They are completely sealed and weatherproof, and will allow for a 5 V feed without having to splice into any wires. Simply provide the modules with a switched 12 V feed and ground to give you 5 V out on the 3rd wire. Package includes: * Module * AT06-4S connector * Seal plug * Three 16-18AWG terminals * Instructions
Not Yet Reviewed
$38.99
These FAST XFI converter cables feature Qwik Tune technology, which allows for ECU programming without a laptop. XFI cables can process, analyze, and adjust four times faster than previous EFI systems. They also make it possible for you to have data logging capabilities and memory for analyzing up to eight additional monitored inputs. If you're looking for an XFI converter cable, Fast has the high performance cables you need.
Not Yet Reviewed
$46.95
Summit Bucks
Clearance
ACDelco GM Genuine Parts Start/Stop multi-function power supply converters are designed, engineered, and tested to rigorous standards—and are backed by General Motors. These replacement units are identical to the factory models. They're available for a variety of vehicles; order the converter recommended for your application.
Not Yet Reviewed
$75.99
$22.50
Summit Racing™ MAP sensor adapters enable you to use a Holley LS2 harness with LS3 engines. These adapters feature pre-terminated connectors and wiring for a direct plug-and-play installation.
( 4 )
$28.99
Caspers Electronics MAP sensor harness adapters make change happen--easily! Whether you want to convert your LS1/LS2 to an LS3/LS9 MAP, adapt to early or late models, or use the factory sensor location under the hood for your XFI/Fast to GN adapters, Caspers offers a selection of pre-terminated manifold absolute pressure sensor adapters to get you plugged in properly.
( 3 )
$24.79
Upgrade your alternator with the assistance of Tuff Stuff Performance alternator conversion pigtails. These wiring accessories are available to convert specific GM alternators, with or without a dash indicator lamp. Choose the model needed for your application.
( 11 )
$30.99
—
$45.99
Haltech Nexus Rebel LS MAP sensor adapter harnesses convert the MAP sensor connector on the Rebel LS main terminated harness from an early- style/Gen III to a modern Gen IV connector.
( 1 )
$24.00
Repair your faulty connections with the help of RESTOPARTS® Supplied wire connectors. These pigtails are made from the correct gauge wiring to properly connect your new or original switch. Available to fit many makes, models, and years, you can keep your window switches operating properly with RESTOPARTS® Supplied power window/convertible switch pigtails.
Not Yet Reviewed
$46.99
ICT Billet MAP sensor harness adapters make change happen—easily! They offer a selection of pre-terminated manifold absolute pressure sensor adapters to get you plugged in properly. ICT Billet wire adapter harnesses are assembled with OEM tooling, connectors, lock seals, and terminals, and utilize factory harness wire colors. They're available in WeatherPack, Bosch, Delphi/GM, and Metri-pack connector styles for use on many Chevrolet small block LS-based engine applications from 1997 and up.
( 3 )
$43.99
MSD tach drive adapters are designed to fit MSD distributors using the 3/16 in. tang drive cable. They are made of bronze, and feature a 0.104 inch square drive (Corvette style) drive cable end adapted to the 3/16 in. tang drive used on all tach drive MSD distributors.
( 13 )
$27.87
Top Street Performance MAP sensor harness adapters allow LS1 and LS2 engines to run the later LS3 MAP sensor. These premium harness adapters provide an easy plug-and-play installation without having to cut and splice into the factory harness. Complete your Velocity intake set-up the easy way! Order a MAP sensor harness adapter from Top Street Performance.
Not Yet Reviewed
$29.62
American Autowire Factory-Fit wiring harnesses are OE replacements and are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped, and ready to install upon arrival. They are best suited for a restoration project with minimal to no modification from the factory specification. American Autowire Factory-Fit harnesses are offered for individual dash, engine, forward lamp, console, rear body, and more, but the best thing is you can purchase a wiring harness as you need it or can afford it, making them great for those on a budget. Plus, since they are OEM-styled the fit is perfect and the installation time is less.
( 28 )
$25.65
—
$53.20
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 54 )
$33.99
$20.99
—
$56.99
Summit Racing™ offers alternator conversion harnesses for a wide selection of vehicles, particularly classic cars from the 1960s and '70s. These high-quality OEM-style replacements are "external to internal regulator" harnesses designed to convert your external alternator to the new style internal regulated alternators available in higher output models. They will not ruin your factory wiring harness, they are plug-and-play, and can be retuned to factory in minutes. Order the model recommended for your application.
( 8 )
$26.99
—
$34.99
If you're in the market for a replacement Chrysler ignition box, Proform offers Mopar licensed ignition boxes. These officially licensed Mopar ignition boxes allow you to convert your old point-type ignition to today's more reliable electronic ignition or make a performance upgrade to your stock electronic components. Available for small block and big block applications, they are ideal for mildly modified performance engines. In the kit you'll get an official licensed Mopar ignition box and a new high-quality wire harness. Order the ignition box model for your application. Additional product details: * Ignition boxes are available in Classic Orange or Classic Blue * High-quality wire harness * Designed to work with Mopar ignition conversion kit (sold separately) * Use with ballast resistor * Ignition coil is sold separately
( 6 )
$47.95
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 93 )
$23.50
—
$55.99
Do you need to convert or repair your existing multi-port fuel injection harness? These Painless Performance fuel injector wiring connectors enable you to repair crushed or broken connectors on your factory harness and will also allow you to convert over to the EV6/USCar injectors that can be found on modern multi-port fuel injection systems. Painless Performance fuel injector wiring connectors contain the necessary terminals, seals, terminal locks, and connectors to fit 8 injectors.
( 20 )
$35.99
—
$39.99
Use Summit Racing™ Mopar electronic control wiring harnesses to service a missing or worn ECU-to-distributor harness. These replacement harnesses enable you to convert your OEM points-style ignition to an electronic ignition system. They offer the correct plug-in for an electronic ECU, or spark control box—and that sure beats having to wire the system yourself. Make life easier! For the parts you need to keep your vehicle in motion, check out our inventory at Summit Racing™!
( 25 )
$26.99
ICT Billet LS VVT to non-VVT camshaft sensor adapters convert your VVT harness to a non-VVT sensor. These harnesses are plug-and-play and are assembled using OEM tooling with OEM Delphi connectors and terminals. Order the model recommended for your vehicle and engine application.
( 4 )
$43.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$24.99
Edelbrock Max-Fire ignition coils are designed with higher resistance for increased energy output at higher rpm, when compared to an OEM coil. They're ideal for use with turbocharged and supercharged applications or engines that have been converted to E85 fuel. Available in a various finishes and styles, Edelbrock Max-Fire ignition coils are what you need to make your performance engine build complete.
( 11 )
$46.95
—
$60.95
Are you experiencing hard starts, stalling issues, rough idle, or hearing a slight pinging within your engine? Don't panic. It may be related to a bad throttle position sensor. Delphi throttle position sensors are designed to sense throttle movement and change of position. They also regulate various engine and vehicle operations, including spark timing, air and fuel ratio, torque converter lockup, air conditioning, and idle speeds. With that said, throttle position sensors are an important component, and if your existing sensor seems to have gone bad, just swap it out for a new one from Delphi.
( 13 )
$20.99
—
$52.99
ICT Billet camshaft position sensor adapter harnesses are used when converting from rear-block sensor to front-cover sensor. They will, for example, adapt a Gen IV LS sensor to a Gen III harness. The harnesses are made with OEM-grade TXL wire and assembled with OEM tooling and OEM Delphi (connector, lock, seals, and terminals). Order the model recommended for your application.
( 3 )
$43.99
Dragon Fire boot and terminal LS conversion kits convert your non-LS distributor boot ends into LS coil packs. The components include 7mm to 8.5mm wires with brass terminals, stainless steel snap-locks, and extra-thick boots.
( 3 )
$29.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
