Availability
Showing In Stock Items. Show All 55 Items.
Summit Racing™ Easy O2 sensor mounts simplify the addition of wideband to your car! Not a welder? No problem--our 304 stainless steel oxygen sensor mounts are easy to install. Simply drill a hole in the exhaust, install the gasket, and bolt the clamp—no welding is necessary! Add O2 sensors with our no-hassle Summit Racing™ Easy O2 sensor mounts, available for a variety of pipe diameters.
( 55 )
$43.99
On Sale
More simplistic EFI systems have made conversions extremely popular, but adding the sensor often means making major changes to your exhaust system. Hooker clamp-on oxygen sensor bungs are designed to work with your current exhaust for an easy installation. Drill an appropriate size hole in the indicated location, clamp on the 304 stainless steel bung, and install the sensor. Simplify EFI conversions with Hooker clamp-on oxygen sensor bungs.
( 30 )
$49.95
$44.95
—
$49.95
FiTech oxygen sensor bung assemblies offer a no-weld installation. Oxygen sensors are vital components that help you adjust to your engine's fuel/air ratio via the electronic control unit (ECU). With these easy-to-install kits, you're on your way to improved performance. Simply drill a hole in your exhaust, install the gasket and sensor fitting, and then secure with the band clamps. Voila! Now you can install an oxygen sensor without welding in a bung, thanks to FiTech.
( 23 )
$21.00
Mount your mass airflow sensor with ICT Billet mounting flanges. Designed to be welded, they are radius-cut on the bottom to accept 4 in. pipe. They include mounting bolts, and of course, they are all manufactured from aerospace-grade 6061 billet aluminum.
( 6 )
$29.99
—
$34.99
When tackling an axle swap project, the miscellaneous pieces and parts make all the difference in either a smooth install or a nightmare. Artec Industries ABS sensor mounting plates are one of the key components you'll need to get the new axle and computer in sync. These plates allow the ABS sensor to mount just as it did with the original axle--enabling your brakes to function like they did with the stock axles. Order the model recommended for your Jeep application.
Not Yet Reviewed
$28.59
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 93 )
$23.50
—
$55.99
Edelbrock Pro-Flo EFI replacement intake air temperature sensors are available for their Pro-Flo and Pro-Flo XT EFI systems. When it comes to components to keep your EFI system working smoothly, Edelbrock has you covered.
( 2 )
$40.95
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$49.99
On Sale
Artec Industries ABS reluctor rings provide your on-board computer with correct data from the anti-lock braking system, eliminating codes and limp mode issues. These tone rings are made from quality steel and available in a range of tooth sizes to fit a variety of models. They're built specially for the axle swap applications on your Jeep JK.
Not Yet Reviewed
$50.59
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$22.99
—
$44.99
These Chevrolet Performance Parts MAF sensor housing adapters are designed to get your MAF sensor mounted properly. They are manufactured from quality materials and install onto the MAF sensor with no modifications.
( 8 )
$20.19
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$20.99
—
$49.99
On Sale
Fleece Performance offers fan extension harnesses for a wide range of vehicles, including late model Chevrolet and GMC trucks. These factory-style replacements allow you to repair a broken or damaged harness without replacing the entire fan and clutch assembly. The harnesses are mounted to the fam assembly and connect to the fan and chassis harness. Fully automated in-house cutting and terminal crimping ensure you get the highest quality parts needed to get your truck back on the road quickly. Order the harness recommended for your fan clutch model.
( 1 )
$45.99
—
$49.99
$39.09
—
$42.49
Dorman crankshaft position sensors are direct-fit replacements that are easy to install and offer long, reliable service. They are constructed from high-quality plastic with metal-reinforced mounting points to protect against failure. Dorman sensors accurately measure crankshaft location to detect misfires and control engine timing. They are manufactured to strict engineering quality standards and are available for a wide variety of applications.
( 2 )
$24.99
—
$39.95
Dorman ABS speed sensors are designed to supply information regarding wheel speed to the ABS computer. One of the most common omissions in maintaining a modern anti-lock brake system (ABS) is checking out the speed sensors. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again.
( 37 )
$26.99
—
$46.50
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$20.99
—
$55.99
Summit Bucks
ACDelco washer fluid level sensors are designed to mount in the factory location on your washer fluid reservoir and alert you when the fluid level is getting low. They're constructed of durable materials and attach to the stock wiring connection for an easy install. Order the model recommended for your vehicle.
( 1 )
$34.99
Clearance
Bosch camshaft position sensors may be what you need to resolve stumbling and stalling issues. These sensors will accurately determine engine position, based on the location of the camshaft. And then, engine position is used for determining the injection and ignition sequence. The sensors feature robust construction with TIM--twist insensitive mounting. They offer reliable digital measurement and a wide temperature range. The timing of your car's engine components is vital for the best performance. Let Bosch camshaft position sensors help you maintain efficiency.
Not Yet Reviewed
$53.99
$47.50
Anti-lock braking system speed sensors play a vital role in the safety and maneuverability of your vehicle. NGK ABS speed sensors will accurately monitor rotational speed for anti-lock brake function, stability control, and traction control. The connectors, mounts, and wire lengths are an exact match to OE for worry-free installation. Grease, mounting nut, and instruction sheet are included where applicable. Select one(s) designed for your vehicle.
( 1 )
$25.99
—
$35.99
Clearance
Beck/Arnley ABS speed sensors supply information regarding wheel speed to the ABS computer. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, then the computer modulates the anti-lock feature until the speeds are equal again.
Not Yet Reviewed
$92.99
$27.99
—
$52.99
When moving or relocating your MAF sensor, you'll want one of these Ron Francis Wiring mass airflow sensor extension harnesses. They feature factory-terminated ends on one end for a plug-in installation and have color-coded wires for easy wiring on the other end. The harnesses are 36 in. long, so you'll have plenty of wire no matter where the MAF sensor is mounted in the engine compartment.
( 7 )
$30.33
Crown Automotive air temperature sensors are replacement parts which gauge the temperature of the incoming air to the engine. This information is provided to calculate the correct amount of fuel needed for proper economy and performance. When your sensors become damaged or less effective, even those of you not mechanically inclined will find that you can install these sensors easily. Crown makes them to OE specifications for fit, function, and form.
( 2 )
$34.99
Standard Motor Products MAP sensors are direct, high-quality replacements for your vehicle's worn, damaged, or malfunctioning manifold absolute pressure sensor. These sensors accurately produce voltage or frequency as manifold pressure changes, and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. On engines with a speed density type of fuel injection, the MAP sensors also help the PCM estimate airflow. Malfunctioning MAP sensors can often cause problems such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and poor engine performance. Keep your vehicle in top operating condition with Standard Motor Products MAP sensors.
( 18 )
$26.99
—
$35.99
Astemo offers camshaft position sensors for a wide range of vehicles, particularly import models. These stock replacements are built to OEM specifications for performance and longevity. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the camshaft position sensor recommended for your car, truck, or van.
( 4 )
$46.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
