Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
77 Results Found For "sbc"
Showing In Stock Items. Show All 90 Items.
ACDelco Ignition Coils
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 25 )
$33.99
—
$49.99
ACDelco Gold Ignition Control Modules
ACDelco Gold ignition control modules are a high-quality replacement for many vehicles on the road today. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. The modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints; and they've been laser-trimmed to provide precise values and reduce deterioration and damage. Gold ignition modules include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. Order the model recommended for your application.
( 14 )
$42.99
OER Ignition Coil Brackets
OER ignition coil brackets are reproductions of the originals for use on various GM small block engines. Manufactured from precision stamped and formed steel, each bracket is built to factory specs and include the long coil cross-screw used to retain the coil to the bracket. Each bracket is plated in clear zinc for corrosion resistance and authenticity. The coil brackets also have a correct 25-degree angle to ensure proper fitment.
( 4 )
$22.79
Davis Unified Ignition Cap and Rotor Kits
For great firepower, you need all of the spark that you can get. and Davis Unified Ignitions cap and rotor kits from Performance Distributors will give you every jolt that you need. These quality high performance cap and rotors offer up to 50 percent higher dielectric strength and can handle all available voltage. Manufactured using the ideal resin material to handle any system, these rotors have an improved well design to eliminate burn-through, nylon rotor screws to eliminate a "ground" for the voltage to jump at high rpm, and brass terminals on the cap to give you maximum conductivity. These cap and rotor kits are available in a wide selection, including Vortec applications. Plus, many are available in several color choices. Spark your ride into action with Performance Distributors cap and rotor kits.
( 158 )
$37.50
—
$41.75
Painless Performance Connector Cables for TBI and TPI Coils
These connector cables from Painless Performance are designed for use with TBI and TPI coils. Connector cables are available to connect the external coil to the distributor, and to connect the power and tachometer to the coil.
( 12 )
$38.99
—
$46.99
Summit Racing™ High-Output Ignition Coils
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 377 )
$27.99
—
$43.99
Standard Motor T-Series Ignition Coils
Standard Motor T-Series ignition coils are offered in a variety of styles to cover a wide range of vehicle applications. Each coil model is designed to exceed OEM specifications for accurate, maintenance-free operation. High-efficiency laminations optimize magnetic field build-up to produce high spark energy and reliable performance. Standard Motor T-Series DIS ignition coil terminals are steel or aluminum, as indicated by the original equipment. Select the Standard Motor coil ignition designed for your application needs.
( 16 )
$20.99
ACDelco Distributor Condensers
ACDelco distributor condensers connect across the contact breaker points in the distributor and help provide a crisper spark at the plugs. They also retard erosion of the contact-breaker points for enhanced durability. The economical condensers are available in several models for fitment on thousands of vehicles. Order the unit recommended for your application.
( 11 )
$23.99
Standard Motor Distributor Caps
Is it time for a tuneup? Replace your distributor's worn-out cap with a new one from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement distributor caps are designed to exceed OEM specifications for dependable, maintenance-free operation. Order the model designed for your specific vehicle application.
( 114 )
$20.99
—
$22.99
Delphi Ignition Coils
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 80 )
$30.99
—
$48.99
Moroso Distributor Hold-Down Clamps
Moroso distributor hold-down clamps are extra-thick and heavy duty to ensure adequate retention of distributor housing, and are stud-mounted to eliminate thread wear in the intake manifold. They are slotted for quick distributor removal and include a stud, washer, and nut.
( 25 )
$20.99
—
$21.99
On Sale
MSD Distributor Cap and Rotor Kits
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 518 )
$51.19
—
$55.09
$46.07
—
$49.58
On Sale
ACCEL SuperStock Ignition Coils
ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.
( 93 )
$45.98
—
$53.05
$35.35
—
$47.75
Summit Racing™ Bronze Distributor Gears
Make sure that you have the right distributor gear for your steel billet roller cam. Our bronze distributor gears from are made from high-quality aluminum bronze alloy and are precision-machined for smooth, reliable operation.
( 11 )
$40.99
Summit Racing™ Distributor Cap and Rotor Kits
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 384 )
$27.99
—
$41.99
Summit Racing™ Distributor Hold-Down Clamps
Since you're installing that new distributor, you'll need Summit Racing™ hold down clamps. Dress up your engine compartment while securing your distributor. Made from top-quality materials, they're the perfect way to dress up your engine compartment.
( 107 )
$28.99
Billet Specialties Distributor Hold-Down Clamps
Billet Specialties distributor hold-down clamps are just what you need to hold down your distributor in style. They are the perfect way to give your engine compartment that finishing touch.
( 84 )
$46.95
On Sale
MSD Street Fire Cap and Rotor Kits
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 138 )
$48.96
—
$54.05
$44.06
—
$48.65
CVR Distributor Hold-Down Brackets
Keep your distributor from twisting at high rpm with CVR distributor hold-down brackets! These brackets are offered in a choice of anodized finishes and include a stainless mounting stud, nut, and washer. CVR distributor hold-down brackets feature a slotted bolt hole for easy distributor removal.
( 22 )
$32.99
—
$38.99
Summit Racing™ HEI Ignition Coils
Looking to get a faster start, quicker acceleration, and better high-rpm performance from your HEI distributor? You can have it all with Summit Racing™ HEI coils. They deliver increased spark energy--48,000 volts' worth--to give you quicker starts and better acceleration. And special low inductance, high-temperature coil windings charge the coil faster so you'll get increased spark energy at high rpms, too.
( 26 )
$31.99
ACDelco Gold Distributor Caps
ACDelco Gold distributor caps are a high-quality replacement for your vehicle's original component. They're manufactured to meet or exceed your expectations in fit, form and function. Order the model recommended for your application.
( 43 )
$23.99
On Sale
MSD Replacement Distributor Caps
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$55.09
$47.24
—
$49.58
On Sale
MSD Advance Kits
These MSD advance kits are the same kits that come with your MSD distributor. The kits include the needed components to make your distributor perform like it did when it was brand new.
( 133 )
$54.39
$48.95
Summit Racing™ HEI Upgrade Kits
We know you want to get the most out of your ride, so your parts can't just perform--they've got to look good, too. That's why we've manufactured these Summit Racing™ HEI upgrade kits, which feature color-matched components--an industry first! They include an alkyd distributor cap with brass terminal connections, a rotor, a matching coil cover, a cable retention ring, and a high-performance, low-resistance, carbon-to-coil rotor conductor.
( 26 )
$49.99
