Availability
Showing In Stock Items. Show All 24 Items.
Howards Cams distributor gears are available in a variety of materials, styles, and diameters—machined to exacting tolerances. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps. Order the model recommended for your year/make and engine application.
( 25 )
$47.99
—
$52.99
OMIX-ADA designed camshaft mounted distributor gears for a tighter mesh to the distributor gear, allowing your ride to operate at peak performance levels. These gears are designed and engineered to perform according to OEM specifications. They meet or exceed quality standards and are more affordable than you thought! What are you waiting for? Replace your old or worn stock original with an OMIX-ADA quality replacement!
( 6 )
$31.99
On Sale
The basic requirements for a properly running engine are fuel, air, compression, and spark. A weak spark from your ignition system can result in misfiring under high-load driving, and spark blow-out under high boost, which is bad for performance. Mishimoto ignition coils are high-quality replacements that can bring your vehicle up to Stage 0 before moving on to horsepower adding modifications. They are designed and tested to meet or exceed OEM performance standards and are available as a single coil or in sets. Once installed with a set of new spark plugs, you can expect a refreshed ignition system with improved engine startup, a smoother idle, and restored performance. The primary frame of Mishimoto coils is constructed from extremely robust phenolic resin, ensuring optimal longevity in high-temperature environments, while a precision lower rubber boot provides a barrier against moisture entry into the plug well, eliminating chances for spark plug contamination. Each coil is pre-lubricated with dielectric grease to prevent corrosion and ensure an optimal connection between the spark plug and coil. Swap out your worn or defective factory coils with Mishimoto's ignition coils, and as with all their products, the coils include their signature Mishimoto Lifetime Warranty. Choose the ones designed for your vehicle in the quantity needed.
Not Yet Reviewed
$41.95
$37.76
On Sale
Replace your worn out, damaged, or missing gear with one of these Crown Automotive distributor gears. They're made from quality materials and built to OEM specifications, ensuring a direct fit. Most of these kits include the distributor and camshaft gear, and are compatible with various Jeep models, in particular.
( 20 )
$22.99
—
$37.99
$20.69
—
$34.19
Edelbrock Pro-Flo 4 and Max-Fire Ford 289-347 and 351W distributor gears are specifically designed for Pro-Flo 4 and Max-Fire distributors in engines that are running a steel-core hydraulic roller camshaft. Made from steel, these distributor drive gears are an optional replacement part for the iron gear that comes installed with the distributor. Edelbrock also marks these distributor drive gears with a yellow painted dot for easy identification.
Not Yet Reviewed
$34.95
OMIX-ADA has distributor drive gear kits that you need to keep your distributor in top working order. These components include camshaft and distributor mounted gears specifically designed for your application.
( 17 )
$35.99
Make sure that you have the right distributor gear for your steel billet roller cam. Our bronze distributor gears from are made from high-quality aluminum bronze alloy and are precision-machined for smooth, reliable operation.
( 11 )
$40.99
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 76 )
$23.99
—
$38.99
On Sale
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 60 )
$46.09
$41.48
PRW's Melonized distributor gears are designed to ensure precise ignition timing, resulting in optimal combustion. This leads to enhanced engine power, improved throttle response, and smoother acceleration. The high-quality materials and precision engineering contributes to the gears exceptional durability. You'll experience a steady and reliable power delivery, eliminating performance inconsistencies and surges that can impact your driving experience. Order the model for your application. Key features: * PRW formulated silicon bronze saves billet camshafts * Melonized—can be used with any cam material
( 1 )
$46.08
If you are going to install a steel billet roller cam, then you will need a bronze distributor gear instead of the original cast iron gear. Allstar Performance bronze gears are constructed from premium aluminum bronze to provide high strength to handle the stresses produced by high-pressure oil pumps. Allstar Performance bronze distributor gears include roll pins.
( 13 )
$32.99
Edelbrock Max-Fire Ford 289-302 steel distributor gears are designed specifically for use on Max-Fire distributors—in Ford small block 289-302 engines running a hydraulic roller camshaft with a billet steel core. These drive gears are designed specifically for small block Ford Max-Fire distributors with 0.467 in. diameter shaft and 0.250 in. hex oil pump drive. The gears are an optional replacement part for the iron gears that are identified by an orange paint dot that come pre-installed on the distributors. These new steel gears feature a white paint dot for easy identification.
( 6 )
$34.95
MSD blank distributor caps are designed as replacements for MSD Pro-Billet dual sync EFI distributors using a direct ignition system kit. They can also be used on distributors equipped with two hall-effect sensors for crankshaft and camshaft signals processing sequential fueling and/or coil-on/near-plug (COP/CNP) applications. Simply remove the distributor cap and rotor for proper fitment. Order an MSD COP blank cap for dual sync distributors to keep your engine's spark plugs firing properly.
( 1 )
$32.91
Getting the right material is the most important part of choosing a distributor gear, and DUI offers several choices. Davis Unified Ignition cast iron distributor gears are economical, harder than composite or bronze types, and ideal for flat tappet cams.
( 1 )
$35.00
—
$46.99
These Proform distributor gears will keep your distributor and cam in sync and meshed together. Their high-quality fitment and gear mesh ensure that you will have accurate timing, and their durable construction will be sure to give you a lifetime of service. Proform distributor gears are available for a variety of applications from stock to aftermarket.
Not Yet Reviewed
$24.99
Engine Works offers distributor gears for a variety of applications, including many stock or Ready-to-Run (RTR) distributors. These replacements are precision-engineered and meticulously machined from extruded bonze for unparalleled durability. They're available in multiple shaft diameters to fit OEM-style and aftermarket distributors. On vehicles with mechanical spark timing, the distributor gear sits at the bottom of the distributor shaft, where it meshes with the gear on the camshaft. This gear can wear out over time, or you might need one that's compatible with a new camshaft. To maintain proper timing, order the replacement recommended for your vehicle.
Not Yet Reviewed
$47.49
Clearance
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 101 )
$62.99
—
$66.99
$37.50
—
$40.50
PRW bronze distributor gears are designed to minimize wear to your high performance camshaft. They are crafted from superior quality bronze aluminum and are precision CNC-machined to provide a smooth, consistent operation. PRW bronze distributor gears are easily replaced and include a roll pin.
Not Yet Reviewed
$53.85
These FAST distributor caps are the best way to help out your ignition. The compression-molded FAST distributor caps are stress-relieved in special fixtures immediately after molding to help ensure dimensional stability. Keep your ignition firing cleanly and reliably with one of these FAST distributor caps.
( 5 )
$22.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
