Availability
Showing In Stock Items. Show All 16 Items.
On Sale
Holley offers MAP sensor adapters for a variety of Chevrolet LS engine applications from 1997 and up. They feature pre-terminated connectors and wiring for a direct plug-and-play installation. Depending on the model you select, the adapter will allow: * The installation of an LS3 MAP sensor in an LS2 or LS1 equipped vehicle * The installation of an MPFI WeatherPack 3-pin connector MAP sensor to the 3-pin Delphi GT connector * The installation of a Delphi MIP 3-pin connector MAP sensor to the 3-pin Delphi GT connector
( 20 )
$40.21
$36.19
On Sale
Are you in need of quality replacement components for the Sniper 92mm/102mm throttle body on your Sniper EFI fabricated manifold for GM LS1/LS2/LS3/LS6/LS7 model? Check out what Holley Sniper has to offer, including these throttle position sensors. These quality replacements are sure to do the trick!
( 7 )
$44.66
$40.19
On Sale
Holley offers several coolant temperature sensors designed for use with their Pro-Jection, Sniper, and other fuel injection systems. They feature brass construction with 3/8 in. thread and will provide the ideal fit and function to monitor your engine's coolant temperature. Select the one designed for your system.
( 19 )
$37.46
$33.71
On Sale
The pressure inside the intake manifold is an extremely important input to the engine control unit. Holley Sniper MAP sensors respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from 1-5 volts. These replacement sensors will handle applications up to 25 lbs. of boost. Additional notes: * Utilizes stock attaching points * Sensor monitors manifold vacuum, varying output voltage to the ECU as a function of load placed on the engine—providing necessary data to control fuel enrichment
( 3 )
$35.65
$32.09
On Sale
More simplistic EFI systems have made conversions extremely popular, but adding the sensor often means making major changes to your exhaust system. Hooker clamp-on oxygen sensor bungs are designed to work with your current exhaust for an easy installation. Drill an appropriate size hole in the indicated location, clamp on the 304 stainless steel bung, and install the sensor. Simplify EFI conversions with Hooker clamp-on oxygen sensor bungs.
( 30 )
$49.95
$44.95
On Sale
AEM Electronics fluid temperature sensor kits allow you to monitor the temperature of your water, oil, or coolant. Several styles are available and offer sensor, connector, and pins. Select the AEM fluid temperature sensor kit needed for your application. Features of kits available: 30-2011: * Temperature sensor, 3/8 in.-18 NPT, aluminum bung, waterproof connector, pins and wire seals * Operating temperature: -40 to 135 degrees C/-40 to 275 degrees F 30-2012: * Temperature sensor, 1/8 in. NPT, waterproof connector kit and pins * Operating temperature: -40 to 200 degrees C/-40 to 392 degrees F 30-2013: * Temperature sensor, 1/8 in. NPT, High performance DTM-style connector, aluminum bung, connector, and pins * Operating temperature: -20 to 150 degrees C/-4 to 302 degrees F
( 6 )
$54.45
$49.05
On Sale
AEM Electronics offers a variety of replacement parts—including these harnesses for X-Series wideband with oxygen sensor gauges. They provide plenty of length for routing where necessary.
Not Yet Reviewed
$33.74
$30.37
On Sale
AEM cam angle sensor discs are for use with AEM programmable engine management systems. They are a direct replacement for the factory crank angle sensor disc in select applications. Cam angle sensor discs help you eliminate sync issues. (Before purchasing, be sure that the center of the AEM cam angle sensor disc looks exactly like the stock disc in your distributor. Match the hubs of your disc to the AEM disc before ordering.)
( 4 )
$54.45
$49.05
On Sale
The MSD NTK wideband 02 module can be expanded to operate with a second monitoring channel and MSD offers several components for channel 2 operation. When you need more length MSD oxygen sensor extension harnesses provide 18 in. of length for Sensor 2 of your NTK module.
Not Yet Reviewed
$46.10
$41.49
On Sale
AEM Electronics cam angle sensor discs are 24-tooth direct replacements for the factory CAS discs and may be necessary with some Series 1 or 2 EMS when you need to run a different CAS. Before purchasing, be sure that the center of the AEM CAS disc looks exactly like the stock disc in your distributor, and match the hubs of your disc to your AEM disc before ordering.
( 1 )
$54.45
$49.05
On Sale
If you want to use an SCT Big Air meter on your 1989-95 Mustang, then these adapters are just the ticket. SCT Big Air MAF cable harness adapters allow you to plug the later model style connector right into your current MAF plug on the wiring harness. They're quick and easy to install.
( 6 )
$54.99
$49.49
On Sale
AEM Electronics Wideband UEGO Controller Air/Fuel ratio gauge components are designed to be used with AEM wideband UEGO controller air/fuel ratio gauges. Whether you need to replace your sensor or cable, these parts will help you to get your gauge back in working order.
( 23 )
$40.28
$36.25
On Sale
MSD Atomic EFI TBI fuel pressure sensor kits are replacement support components designed to maintain your throttle body's performance. Atomic EFI systems by MSD were designed with two goals—to simplify EFI and improve overall performance. Simplicity is achieved through less wiring and fewer connections, and readily available replacement components such as these Atomic EFI TBI fuel pressure sensors. These support component kits include senor and O-rings to make it easy to uphold optimum performance.
Not Yet Reviewed
$87.15
$47.93
On Sale
MSD offers replacement wiring harnesses for the Power Grid Dual NTK wideband oxygen module—a dual channel air/fuel ratio (AFR) system designed to interface with the Power Grid (P/N 7730) to monitor and record the AFR of internal combustion engines. The oxygen sensor module is capable of measuring AFR as low as ? = 0.5 (7.35:1 gasoline AFR equivalent). The AFR range is configurable using the MSDView software in conjunction with the Power Grid Controller (P/N 7730). Excellent MSD range of the NTK sensor gives each unit the ability to accurately monitor AFR's even on alcohol cars. The MSD wideband oxygen sensor module also provides a 0.5-4.5 VDC analog output proportional to the AFR. This analog output can be sent to a gauge or a data acquisition system. A dual-color LED provides the system status at a glance. (To provide accurate backpressure compensated AFR readings on turbocharged applications, the addition of an Exhaust Pressure Module, part number 7767, is required.) MSD can provide a replacement main harness, sensor 1 harness, or sensor 2 harness for your application. Order the model needed to restore proper performance to your vehicle.
( 1 )
$65.35
$35.94
On Sale
Artec Industries ABS reluctor rings provide your on-board computer with correct data from the anti-lock braking system, eliminating codes and limp mode issues. These tone rings are made from quality steel and available in a range of tooth sizes to fit a variety of models. They're built specially for the axle swap applications on your Jeep JK.
Not Yet Reviewed
$50.59
$45.53
On Sale
When tackling an axle swap project, the miscellaneous pieces and parts make all the difference in either a smooth install or a nightmare. Artec Industries ABS sensor mounting plates are one of the key components you'll need to get the new axle and computer in sync. These plates allow the ABS sensor to mount just as it did with the original axle--enabling your brakes to function like they did with the stock axles. Order the model recommended for your Jeep application.
Not Yet Reviewed
$28.59
$25.73
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
