Availability
Certain engines, such as small block and big block Chevys, can produce high-vacuum or blowout conditions that can be big problems for many valve cover gaskets. Fel-Pro Performance CorkLam gaskets are designed to deal with those challenges. They have a metal core for extra strength, with a special cork-and-rubber compound bonded to both sides. This produces tough gaskets that can deal with problem engines, while also providing a little extra clearance between the valve cover and the valvetrain.
( 259 )
$41.99
—
$48.99
Sealing valve covers can often be a big challenge, but trust Trick Flow® to get that one handled. Trick Flow® valve cover gaskets are one-piece designs made to eliminate potential leak paths and they have specially chosen high-temperature coatings to prevent leakage. The sealing itself is done with a reliable, temperature-resistant composition. Some gaskets have a tough steel core that gives extra rigidity to resist pressure and vacuum. On top of that, these gaskets are extra-thick to resist crushing. That also gives you a little extra clearance between the valvetrain and the valve cover.
( 9 )
$34.99
—
$57.99
Marine gaskets, like performance gaskets, do face more challenging sealing situations than automotive replacement gaskets. Fel-Pro is an undisputed leader in marine gaskets built tough to stand up to the challenge. These Marine oil pan gaskets are available in a variety of marine applications, in either a solid steel core or rigid carrier design, and on some gaskets, the side rails are trimmed for stroker engines.
( 1 )
$22.99
—
$50.99
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 548 )
$20.99
—
$43.99
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 456 )
$30.95
Fel-Pro offers valley pan gaskets in a variety of materials, port styles, and configurations. Order the model recommended for your vehicle and engine application.
( 139 )
$25.99
—
$32.99
Fel-Pro PermaTorque MLS head gaskets provide the robust seal needed to contain peak combustion pressures and temperatures—and to withstand the significant casting motion encountered in many of today's automotive engines. The gaskets feature multiple layers of steel, precisely engineered sealing beads, and advanced polymer coatings to maintain a proper contact pressure between the cylinder head and block. Unlike other multi-layer steel head gaskets, PermaTorque MLS seals also include a proprietary blue aftermarket coating that accommodates a wider range of surface finishes. These gaskets are manufactured using precision tooling to ensure exact sealing bead location and profile. Order the model recommended for your specific vehicle and engine application.
( 86 )
$38.99
—
$49.99
Mopar Replacement timing cover gaskets are genuine parts you can count on to supply the OE fit and function you're expecting. Manufactured from quality materials, their selection of timing gaskets is the perfect choice to repair and maintain your Mopar ride with leak-free performance.
( 3 )
$27.99
OEM replacement Fel-Pro head gaskets are ideal for stock rebuilds on street-driven cars and trucks. These seals are available in a dozen materials, with different bores, thicknesses, and compressed volumes. They're designed for precise fitment on specific engine applications. (Fel-Pro head gaskets are not intended for racing use.)
( 254 )
$21.99
—
$50.99
On Sale
Mr. Gasket head gaskets are ideal for stock rebuilds and mild performance applications. They're designed to offer greater sealing characteristics than OEM, plus longer life--and they're more affordable, too!
( 46 )
$44.06
—
$44.08
$39.65
—
$39.67
On Sale
Mr. Gasket Ultra-Seal exhaust gaskets are designed and constructed to improve the sealing of exhaust header flanges. Unlike standard exhaust gasket material, Ultra-Seal gaskets incorporate a graphite-impregnated facing and a steel-expanded metal core that reinforces and increases their tensile strength. This allows the gaskets to conform to warped flanges, giving them better sealing capabilities without deteriorating or cracking under the excessive heat and pressure that's common in exhaust systems. Ultra-Seal gaskets are available for a wide range of port styles and sizes. Additional features and benefits: * Expanded steel core provides stability and maximum torque retention to eliminate gasket failure * Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head * High-recovery material allows header or manifold flange to stay sealed if flange loses clamp-load * Can be trimmed for modified port applications * Designed for OE replacement, high performance street, drag race, road racing, and oval track use
( 176 )
$44.06
$39.65
—
$47.44
Unwanted engine noise and fumes under the hood can often be traced to poor seals. Fel-Pro offers an extensive line of replacement gaskets to provide a leak-free connection between your intake and exhaust manifolds. Designed for OE-style fitment on hundreds of specific makes/models, the gaskets are crafted from top-quality materials, such as steel core laminate and compressed fiber laminate. Order the gasket configuration to match your exhaust manifold specs.
( 196 )
$22.99
—
$29.99
Keep your oil where it belongs with SCE AccuSeal E rear main seals! These seals provide the precision fit that you want at a price that you can afford, and the durability to last. SCE AccuSeal E rear main seals prevent your oil from escaping and leaking onto the track and covering your transmission.
( 11 )
$29.62
—
$32.72
Cometic valve cover gaskets are made from aramid fiber. This is a premium high-temperature, high-density, creep-resistant material that is fuel-resistant and asbestos-free. These gaskets require no retorquing or additional sealant. If you want a dependable seal, go with Cometic Gasket valve cover gaskets.
( 71 )
$20.20
—
$39.69
COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton® seals.
( 192 )
$26.95
Mr. Gasket OEM stock replacement rear main seals are ideal for stock rebuilds or street-driven cars and trucks. They're made from high quality silicone to withstand extreme engine temperatures and injection molded for a precise fit. These seals are not intended for race applications.
( 9 )
$49.95
When you need a professional seal, choose SCE AccuSeal Pro gaskets. These premium gaskets are made with proprietary materials and processes to provide you with the seal that you want, need, and expect. These AccuSeal Pro intake gaskets feature silicon bead seals with one third of the clamp load of other brands, making them handy on angle-milled heads! Get the sealing power needed for the top performance of your race or street engine with SCE AccuSeal Pro gaskets.
( 47 )
$24.09
—
$32.80
Mahle Original offers a choice of cylinder head gaskets to fit your project with the most effective, leak-free seal. Because vehicles and performance levels are as different as the people who drive them, a head gasket that works for you may not work for another. Mahle Original knows this. Their list of head gasket materials includes multi-layered steel, Solicor, VR-2000, Nitroseal, and VR500. Each does their job differently, but you can rest assured that the sealing job they do will be effective and efficient. Positive sealing is available with Mahle Original cylinder head gaskets. Order the style designed for fitment with your vehicle and engine application.
( 45 )
$29.99
—
$53.99
On Sale
Mr. Gasket Ultra-Seal valve cover gaskets may be the most advanced, highly tested, and real-world proven gaskets on the market today. They're made from high-density cork-and-rubber gasket material. This construction means that they are non-shrink and non-stick, don't have to be re-torqued, and can be reused. Their extra thickness also adds a little clearance between the valvetrain and the valve cover.
( 150 )
$37.75
—
$44.08
$33.98
—
$39.67
Mopar Replacement exhaust manifold gaskets are genuine OE-replacements. That means your Chrysler, Dodge, Ram, Plymouth, or Jeep will receive the perfect part to repair and/or restore performance, just as it should be. The exhaust manifold gaskets are made from quality materials to provide reliable, long service with the right fit, function, and value. Gain a positive seal with the precision-made Mopar gaskets designed for your vehicle application.
( 9 )
$31.99
—
$32.99
On Sale
Do you have a leaky transmission pan gasket? You need to replace it with one of these premium transmission pan gaskets from Mr. Gasket. They're precision-made from materials that feature excellent compressibility and greater thickness recovery for a positive seal. Your garage floor will thank you!
( 31 )
$56.89
$26.38
—
$51.25
Mahle Original rear main seals are high-quality rear main seals designed to replace your factory seals. They are constructed from high-quality materials to meet or exceed OE standards and are designed to provide long-lasting durability and performance. If you're looking for high-quality replacement seals for your vehicle, Mahle Original rear main seals are your solution.
( 28 )
$21.99
—
$32.99
On Sale
Mr. Gasket has two different oil pan gasket sets for your needs: Standard and Ultra-Seal. For stock rebuilds, the standard gaskets are just fine, but for high performance applications, the Ultra-Seals are where it's at. The Ultra-Seal oil pan gaskets are designed for today's performance engines that create excessive amounts of vacuum and pressure in the oil pan. They're constructed from a fiber material that features excellent tensile strength and superior blowout resistance.
( 27 )
$41.63
—
$48.59
Edelbrock's performance CRC (core-reinforced-composite) valve cover gaskets' multi-layer construction consists of two highly compressible, high-rubber content, fiber-reinforced outside layers chemically bonded to a high-strength composite core. This unique core-reinforced construction provides excellent sealing integrity and conformability for easy installation, as well as radial strength to resist high-vacuum or blowout conditions.
( 223 )
$30.95
—
$47.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
