Availability
Summit Racing™ stainless steel multipurpose hard lines are ideal for plumbing your brake or fuel systems. These Marine-grade, 316L Polished stainless lines feature a standard 0.028 in. wall thickness for strength while remining workable and are soft-annealed for easier flaring, cutting and bending compared to other stainless steel lines. Molybdenum is also added for ultimate corrosion resistance. These lines meet SAE J1677 and ASTM A249 specifications. They're rated for a minimum burst pressure of 5,945 psi (and higher depending on line OD) and have been pressure tested and checked for safety. Order the tubing diameter needed for your applications. NOTE: Stainless steel is more difficult to bend and flare, compared to typical steel line. We recommend that a professional-grade flaring tool be used with these lines. Stainless steel can also be difficult to seal when replacing an existing brake or fuel line. The previously installed line can create a wear pattern on the flare seat which will not allow the new stainless steel flare to seal properly. When replacing an existing line we recommend a thorough inspection of the existing brake fitting, fuel fitting, junction block, wheel cylinder, brake caliper, etc. It's possible that the existing component may need to be replaced for a proper seal.
( 8 )
$45.99
—
$58.99
This SAE 30R7 rated Summit Racing™ braided nylon hose is designed for use with gas, oil, diesel, and other fluid applications. It uses a higher grade nitrile inner core that is specifically compounded to hold a higher fuel resistance than any other nylon hose product on the market. It can handle heat levels up to 275 degrees F and a maximum working pressure of 350 psi. Summit Racing™ braided nylon hose is lightweight and flexible. These features, combined with its ease of assembly, make it the fastest growing choice of hose products for racing and performance enthusiasts.
( 184 )
$21.99
—
$93.99
Summit Racing™ fuel lines are a great addition to any fuel system. They include all necessary hardware for an easy installation on your Edelbrock, Holley, Carter, or Summit carburetor. Available in multiple styles to suit your needs.
( 252 )
$25.99
—
$54.99
When our guys found this high-quality hose at such a good price, we thought they were trying to put one over on us. Luckily for you, this hose is just as good as the expensive stuff, without the big bill. Summit Racing™ stainless steel hose consists of a CPE (Chlorinated Polyethylene) inner tube with a partial stainless steel reinforcement inner braid. On top of that, we add a heavy-duty, protective, full stainless steel braid on the outside, making it exceptionally lightweight, flexible, and durable. Even better, our hose is designed to handle gasoline, oil, or coolant.
( 537 )
$25.99
—
$69.99
Designed to fit all Edelbrock square-bore carbs, Edelbrock single-feed fuel line kits provide a clean and custom plumbing solution for your Edelbrock carburetors. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. Edelbrock single feed fuel line kits are the right choice for your hot rod.
( 371 )
$38.95
—
$53.95
Go ahead and improve your fuel flow—we have you covered! Summit Racing™ aluminum fuel lines are lightweight 3003 drawn aluminum and capable of handling more flow than your factory lines. Plus, the .039 in. wall seamless tubing is legal in all race classes. Get ready for that winning feeling when you order the proper O.D. of Summit Racing™ aluminum fuel lines designed to fit your application.
Not Yet Reviewed
$22.99
—
$37.99
Summit Racing™ stainless steel brake lines are available in different lengths and diameters, and most are assembled with standard-size stainless fittings on each end. Order the model needed to help complete your brake job for improved vehicle brake performance and a professional, show-quality look.
( 12 )
$22.99
—
$31.99
Give your brakes an extra boost of stopping power with Summit Racing™ brake hose sets! These hoses are made of top-quality material and are available for a variety of front and rear brake applications.
( 80 )
$27.99
—
$57.99
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 41 )
$33.99
—
$52.99
Dayco fuel line hoses are designed to be used with all types of non-fuel injected gasoline and diesel engines. Constructed with a neoprene cover and nitrile tube reinforced with a single ply of braided cord, they provide great resistance to gasoline, oil, grease, and weather. Dayco fuel line hoses meet SAE J30R7 requirements and also meet the fuel permeation requirements of SAE J1527 Class 2 specifications.
( 135 )
$27.99
—
$55.99
The Stop Shop assembled brake tubing kits will help you facilitate restoration and repair on your vehicle for optimal braking performance. Choose The Stop Shop brake tubing kit best suited for your plumbing project.
( 22 )
$23.79
—
$39.99
On Sale
Your fuel line is the connection to your fueling system and, with the proper connections, should deliver the right amount of fuel at the correct rate to power your performance ride down the strip or around the track. Fragola Performance Systems offers high performance Pro Stock fuel line kits for Demon and Holley carburetors. These premium fuel line kits use strong braided stainless steel crimped P.T.F.E. hose assemblies and aerospace-quality aluminum fittings that are "bright-dipped" for corrosion resistance and lasting appeal. Fragola swaged smooth bore P.T.F.E. hose is reinforced with a tightly woven covering, making it a natural for high-pressure fuel lines. Feed your power racer with American-made Fragola Performance Systems fuel line kits--you'll be glad you did.
( 37 )
$52.99
$35.09
—
$59.99
Summit Racing™ stainless steel braided brake line assemblies are constructed from high-quality stainless steel braided hose and feature hose ends that are zinc plated for protection. They also feature pre-assembled ends that are factory-crimped to eliminate leakage. They come available in different lengths and end configurations, so we are sure to have you covered with one of these Summit Racing™ stainless steel braided brake line assemblies.
( 37 )
$22.99
—
$26.99
Summit Racing™ PTFE hose is high-quality hose at a great price. Designed to transfer fluids and fuels in the most demanding conditions, they deliver smooth, non-stick inner cores wrapped in heavy-duty 304 stainless steel braids. Our hose offers light weight strength and flexibility without breaking down—and durability for a long service life. PTFE hose is available in a variety of lengths, diameters, and PSI ratings. Meet the needs of your vehicle and your wallet with quality-priced Summit Racing™ PTFE hose.
( 197 )
$20.99
—
$57.99
Summit Racing™ copper/nickel alloy tubing offers several benefits when fabricating lines. They provide the strength of steel, yet they are more flexible allowing you to bend and form lines easier, and they are more corrosion-resistant. Make perfect bends and flares to fit your brake system, fuel system, or whatever you're plumbing with Summit Racing™ copper/nickel alloy tubing. They are available as 25 ft. length coils in several diameters.
( 3 )
$29.99
—
$55.99
These Summit Racing™ dual feed fuel lines are a great addition to any fuel system. The pre-assembled fuel lines clean up your engine compartment and properly deliver fuel to your carburetor. Available in multiple sizes and styles to suit your needs.
( 438 )
$49.99
—
$68.99
Summit Racing™ Premium reinforced rubber hoses offer the perfect choice for all your performance fuel, oil, and water fluid transfer needs. Today, the paraffins and additives found in commercial- and performance-bought fuels and oils have become too much for old school conventional rubber hose, causing premature deterioration. Our Summit™ Premium reinforced rubber hoses consist of a multi-layer wall, preventing fuel infiltration from within the hose or evaporating into the atmosphere, as well as offering high resistance to heat and providing superior fluid flow to effectively eliminate premature failure. Available in several diameters and lengths, these synthetic twined reinforced hoses will stand up to the most corrosive additives found in the market today. They are SAE J30R9 rated and safe to use with alcohol, methanol, E85, E97, water, coolant, and oil. Select the size(s) needed for your project.
( 4 )
$20.99
—
$61.99
Currie is all about making things easy! These rear brake hoses bolt right onto the 3rd member studs of your 9 in. style housing. They eliminate the need for you to weld any brake hose anchoring points onto your new, possibly already powdercoated housing. The hoses can be mounted in various locations, as dictated by your application.
( 17 )
$44.99
The Stop Shop brake tubing kits will help you facilitate restoration and repair on your vehicle for optimal braking performance. Each kit comes with the brake line tubing, and may include an assortment of the most common standard brake line fittings, a tubing cutter, or both. Choose The Stop Shop brake tubing kit best suited for your plumbing project.
( 20 )
$20.99
—
$54.99
Wilwood's stainless steel braided brake Flexlines are manufactured to high-quality standards and are available in various styles. They deliver a "hard-line" feel and come in different lengths and fitting connections to meet your application needs. Replace an aging, damaged, or leaky brake hose with an upgrade Flexline from Wilwood.
( 52 )
$22.86
—
$52.86
End starvation with Allstar Performance aluminum fuel lines! Allstar provides 25 ft. of coiled seamless tubing, available in three diameters to allow you to complete your custom fuel line installation. Get the size with enough length to suit your needs and feed your power-hungry engine when you purchase Allstar aluminum fuel lines.
( 16 )
$23.99
—
$37.99
Allstar Performance brake line hose kits are available to fit Big GM or metric applications. Kits include everything necessary to complete the connection between a 3/16 in. steel brake line and the brake caliper. Each of these kits includes: * Stainless steel braided hoses * Banjo bolts * Banjo fittings * Crush washers * Steel brake line adapters * Brake line tabs * Brake line clips
( 35 )
$46.99
—
$48.99
These OEM style steel line is double wrapped for strength, and is terne coated to resist corrosion. Summit Racing™ steel hard line is pressure-tested and checked for safety.
( 38 )
$33.99
—
$42.99
Russell stainless steel braided fuel hose kits are quality-engineered to replace stock fuel hoses and come to you complete and ready to run. Their stainless steel outer braid is built tough to resist abrasion and corrosion and the kits are designed with anodized aluminum hose ends. Best of all, they easily connect to OE components for a very professional and reliable installation that lasts!
( 29 )
$21.95
—
$50.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
