Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
28 Results Found For "support"
Showing In Stock Items. Show All 39 Items.
Milodon Chevy Oil Pump Support Brackets
These Milodon Chevy oil pump support brackets are designed to prevent the oil pump housing from cracking under high stress and vibration. They include a durable steel mounting bracket with installation hardware. The brackets will fit OEM and aftermarket oil pumps.
( 2 )
$36.95
—
$38.95
Howards Cams Main Cap Support Straps
If you're running big horsepower, then you may need extra support for your front and rear main caps. Stabilize and strengthen your OEM-style main caps for big power with Howards Cams main cap support straps. These steel straps will help to counter the problems of bottom-end stress and flex management.
Not Yet Reviewed
$26.99
Advance Adapters Steering Brackets
Advance Adapters steering brackets help ease the pain of swapping to a V8, when the extra space in your engine bay shrinks fast. Complete your engine swap faster and easier with an assist from Advance Adapters steering pivot brackets.
( 1 )
$35.64
ACDelco GM Genuine Parts Rocker Arm Shaft Supports
ACDelco GM Genuine Parts rocker panel arm shaft supports are designed, engineered, and tested to rigorous standards by General Motors and are the same as the OE parts installed during vehicle production. These GM-recommended replacements are manufactured for a precise fit and function as intended, contributing to the overall longevity and reliability of your engine. Choose the supports designed for your vehicle year/make/model.
Not Yet Reviewed
$46.99
ICT Billet Rear Alternator Support Brackets
Your LS engines have a rear support brace for their alternators. When you need to replace your alternator, don't forget the ICT Billet rear alternator support brackets. These billet steel brackets are a direct-fit for your unique LS engines and give your alternator stability.
( 3 )
$31.99
OER Chevrolet Alternator Support Mounts
Are you on the make for the correct alternator support mount for a 1964-68 Chevrolet with a small block V8 engine? Don't waste time calling around junkyards--OER has just what you need with their Chevrolet alternator support mounts. These durable steel support braces mount on the leading edge of the driver side exhaust manifold and support the bottom of the alternator. Keep every square inch of your prized Chevrolet authentic with OER.
( 1 )
$25.79
Jones Racing Alternator Brackets
Jones Racing Products manufactures billet aluminum alternator brackets for a variety of engines and alternator amperage sizes. Their lightweight rigid construction keeps your belts in line under extreme loads and rpms.
( 5 )
$20.99
Melling Oil Pump Pickup Retainers
Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. For high performance bolt-on oil pump screen applications, Melling offers additional oil pump screen support with these engine oil pump pickup tube support brackets. The lightweight billet aluminum brackets provide added support for holding the oil pump screen in place during extreme high performance engine operation. Order the replacement model recommended for your vehicle.
( 16 )
$22.99
Canton Racing Accusump Mounting Clamps
Accusump mounting clamps by Canton Racing are required for all Accusumps. When used on each end of an Accusump, they provide proper support at the end caps to ensure that the tube does not become distorted. They're available in billet aluminum or stainless steel to provide support and an attractive presentation.
( 11 )
$34.00
—
$38.00
Wiseco Piston Wrist Pins
Wiseco offers a variety of piston wrist pins designed to handle normal wear and tear on your aftermarket engine during high-contact stress and impact loading applications for those of you running nitrous. Made from different grades of quality steel and finished to support the specific use needed, Wiseco piston wrist pins are available in a variety of diameters, thicknesses, and lengths to best suit your needs.
( 10 )
$21.99
—
$37.99
Summit Racing™ Cam Bearing Sets
Summit Racing™ offers cam bearing sets for a wide range of applications—including many Chevrolet small block V8 engines from 1955 and up. These bearings support the camshaft and allow it to rotate so it will activate pushrods and rocker arms to open and close valves. The direct replacements are available in a variety of materials. Order the set recommended for your vehicle.
Not Yet Reviewed
$24.99
—
$45.99
Canton Racing Oil Pump Pickup Studs
Canton Racing provides oil pump pickup studs for those early-style engines that were not equipped with a main cap stud to support the pickup. These steel studs with a black oxide finish will meet your early-style engine application needs or replace your existing application.
( 19 )
$38.00
—
$48.00
K&N Performance Gold Oil Filters
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 521 )
$21.99
—
$24.99
Scott Drake Power Steering Drop Brackets
Scott Drake power steering drop brackets are a must to properly install your Tri-Y headers. These improved brackets change the mounting hole locations to accommodate all years and applications, with an enlarged hole for power steering ram bushings, and continuous welding affixing both supports. They are finished with a natural gray powdercoating. Get the right clearance for your Tri-Y headers with Scott Drake power steering drop brackets.
( 4 )
$32.87
Engine Works Camshaft Retainer Plates
Engine Works camshaft retainer plates are designed to fit behind the front cover and act as a seal for the front oil passages that feed oil to the lifters, cam, and main bearings. These steel plates support greater cam loads and feature a specially designed silicone O-ring seal to ensure proper sealing.
Not Yet Reviewed
$21.86
ACL Performance Cam Bearing Sets
ACL Performance offers cam bearing sets for a wide range of vehicles from 1955 and up. The high performance tri-metal engine bearings are designed to withstand higher RPM conditions. Each direct-fit replacement bearing features a high-strength overlay plate with reduced thickness for improved fatigue properties. Oder the set recommended for your year/make and engine application. Additional details: *Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil film * 3/4 in. grooved main bearings GROOVED MAIN BEARINGS to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges where required to accommodate large fillet radius on performance crankshafts
( 1 )
$30.99
—
$44.99
Trick Flow® Pushrod Guideplates
Trick Flow® replacement pushrod guideplates are direct replacements for the pushrods that are included with Trick Flow® heads. These steel guideplates support and stabilize the pushrods so that the rocker arms remain centered on the valves. They feature a black oxide finish and no machining is required.
( 13 )
$21.99
—
$45.99
Clevite P-Series Main Bearings
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 255 )
$30.99
—
$41.99
ACL Performance Race Series Rod Bearing Sets
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 9 )
$25.50
—
$49.99
Edelbrock Pushrod Guideplates for Edelbrock Heads
Edelbrock pushrod guideplates for Edelbrock heads are made from high-grade alloy steel and hardened to 60 Rockwell "C." These guideplates are available in either a flat or stepped plate style. Stepped plates support the pushrods closer to the rockers, stabilizing them.
( 9 )
$46.95
—
$49.95
Engine Works Lifter Guides
Engine Works hydraulic roller lifter guides are the newer design LS2 trays used in all current LS builds (except for the active cylinder management engines). These plastic guides feature increased support in the design. They're available in a set of 4.
Not Yet Reviewed
$48.71
Edelmann Steering Gear Rebuild Kits
Repair your steering gear for a fraction of the cost of a rebuilt steering box. Edelmann steering gear rebuild kits contain the seals, O-rings, gaskets, input or sector shaft bearing, and hardware parts specific to your repair. With a commitment to OE form, fit, function, and unparalleled technical support, Edelmann is your obvious choice for power steering replacement parts. Edelmann offers complete coverage, from seal kits to complete rebuild kits.
( 18 )
$24.99
Manley Super 7 Degree Valve Locks
Manley Super 7 degree valve locks maintain the superior clamping properties of their original 7 degree valve locks, but overcome their extrusion problem with increased lock thickness. Manley supports both 10 and 7 degree systems with the highest quality locks and retainers in the industry, manufactured of both steel and titanium.
( 6 )
$48.26
Continental Extreme-Duty Series Poly-V Belts
Continental Extreme-Duty Series Poly-V belts provide up to 4 times longer wear than the original belts in the aftermarket Class 6 to 8 heavy-duty trucks. Offered in different rib profiles, these straight-ribbed belts feature high-abrasion-resistant fabric coated with advanced EPDM polymers to resist cracking and heat build-up, along with increased cord support and improved flex life. Continental Extreme-Duty Series Poly-V belts perform better under higher underhood temperatures, resulting in lower emission standards and meet or exceed SAE J1459 specifications.
Not Yet Reviewed
$30.99
—
$49.99
