Availability
AFR Racing pushrod guideplates offer precise fit and function to keep your pushrods from deflecting under high-rpm conditions. They are manufactured from durable, hardened steel with a black oxide finish for long-lasting performance. The guideplates are available in different styles and sizes to accommodate various Chevy big block or small block type applications. Achieve the performance levels you need with an assist from AFR Racing.
( 14 )
$50.40
Chevrolet Performance offers a complete line of heavy-duty pushrods for most GM engines. They're designed to deliver in high performance street and competition applications. Made of high-quality materials, these pushrods are available in a variety of sizes and style options to suit your needs.
( 3 )
$20.99
—
$25.99
COMP Cams's XD-A pushrods offer a game-changing method for accurately setting lash or pre-load while using non-adjustable-style rockers. These patent-pending pushrods incorporate a top section that slides 2 in. inside a wider bottom section, with one or two shims captured in-between. Proven to 9,000-plus rpm in solid roller LS applications, the system provides a 90 percent increase in bending stiffness for enhanced valvetrain stability. It also allows for lightening of a rocker arm system by 30-plus grams on the backside by removing the adjuster and required support area for threads and seating. The use of lighter rockers with XD-A adjustable pushrods allow higher rpm to be achieved by creating a much more dynamically stable valvetrain system. COMP Cam XD-A pushrods are designed especially for engines with low-mass rocker arms and a light valvetrain with drop-in fitment in LS engines. They can be adjusted over a range of .172 in. in .004 in. increments with shims. Choose the pushrods with the adjustment range needed for your setup.
Not Yet Reviewed
$22.95
ACDelco GM Genuine Parts engine valve pushrods are available for a wide range of vehicles, including many Chevrolet, Cadillac, and GMC models. These steel replacements are designed, engineered, and tested to rigorous standards, all backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Order the model recommended for your application.
Not Yet Reviewed
$22.99
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 176 )
$20.95
—
$33.95
Trick Flow® replacement pushrod guideplates are direct replacements for the pushrods that are included with Trick Flow® heads. These steel guideplates support and stabilize the pushrods so that the rocker arms remain centered on the valves. They feature a black oxide finish and no machining is required.
( 11 )
$30.99
—
$57.99
PRW pushrod guideplates (PowerPlus+) are made from high-treated steel alloy to prevent premature wear—and are black oxide coated to resist corrosion. They make valve operation smoother and more efficient, reducing unwanted sideways motion of the pushrod. These guideplates are recommended for use with high performance hardened pushrods.
( 1 )
$31.49
—
$50.35
Champ Pans lifter valley baffles are made from high-quality materials and are designed to shield your intake manifold from hot oil splash to maintain a cooler intake charge for more power. These lifter valley baffles also help to keep excess oil out of your valve covers and maintain oil pressure in the event of pushrod or rocker arm failure by keeping the lifters in their bores. Replace your worn unit with a top-quality new baffle from Champ Pans--the high performance experts.
( 1 )
$40.57
Lightweight Moroso fuel pump pushrods feature hardened ends to reduce reciprocating mass, which prevents pump arm float and subsequent fuel starvation. They're ideal for use in drag, Oval Track, and street performance applications.
( 9 )
$33.99
Allstar Performance guideplates are available in various applications. They are for 5/16 in. pushrods, and big block Chevy guideplates accept 3/8 in. pushrods. Hardened pushrods are required. These steel guideplates are designed to stabilize valvetrains using high-lift camshafts and high-pressure valve springs.
( 1 )
$21.99
Howards Cams guideplates reduce the unwanted sideways motion of the pushrod under load. This keeps the rocker arm stabilized, making the valve operation much smoother and more efficient. They are made from heat-treated chromoly steel to reduce wear.
( 1 )
$20.99
—
$42.99
Engine Works offers guideplates for a wide range of applications, including many Chevy and Ford engine applications from the 1950s and up. These replacements are pressed from heat-treated steel and finished in a black oxide coating. They're available in flat or raised style, in 5/16 or 3/8 in. diameter.
Not Yet Reviewed
$20.31
—
$24.96
Protect your valvetrain. Manley guideplates are made from heat-treated steel and have a black oxide finish. They are carefully stamped for absolute accuracy and are a must-have for today's performance engines.
( 10 )
$31.35
—
$40.59
Trend Pushrods Premium Series lifters feature through-hardened M2 tool steel for their solid, flat-top lifters designed for use with the Chrysler, Ford, GM, and Toyota engines powering much of the Circle Track world. When combined with a tool steel camshaft, these uncoated lifters allow for increased valve spring pressures and higher engine speeds. They are both sturdy and lightweight, coming in at 70 grams or less! When you're building for high-performance, go with a leader in exotic materials racing experience and order the Trend Pushrods Premium Series lifters best suited for your high-revving application. More product features include: * Hardened to 63-64 Rockwell * Heavy-duty snap ring included * DLC-coated finishes available in Elite Series See product page short description and Overview section to verify the following options * Oiling options include with or without oil hole in foot * Seat movement options include low movement (maximum 0.015 in.)
Not Yet Reviewed
$31.99
—
$47.25
Summit Racing™ offers cam bearing sets for a wide range of applications—including many Chevrolet small block V8 engines from 1955 and up. These bearings support the camshaft and allow it to rotate so it will activate pushrods and rocker arms to open and close valves. The direct replacements are available in a variety of materials. Order the set recommended for your vehicle.
Not Yet Reviewed
$24.99
—
$45.99
Designed to shield your intake manifold from hot oil splash to maintain a cooler intake charge for more power, Moroso Lifter Valley oil baffles also help keep excess oil out of your valve covers and maintain oil pressure in the event of pushrod or rocker arm failure by keeping the lifters in their bores. Due to slight variations in blocks, the baffle may need slight trimming before they will "snap" into place.
( 3 )
$54.99
Engine Works rocker arms studs give you more consistent rocker geometry to keep the rockers, pushrod, and valve stems in alignment. Each stud is machined from 8740 alloy tool steel, roll-threaded, heat-treated and finished with a black oxide, corrosion-resistant finish. Studs are available in a variety of lengths and thread sizes. Sold in sets of 16. Singles are also available. Order the studs recommended for your vehicle and engine application.
Not Yet Reviewed
$31.24
—
$41.21
Built to outlast and outperform in accuracy and strength, Ultra Pro Magnum XD roller rocker arms are engineered from durable 8650 steel and include a machined billet pushrod seat insert for a wide range of super accurate ratios. A unique and wide ratio range to fit almost any popular application from 1.5 to 1.8 in 0.5 in. increments for Chevy and 1.6 to 1.73 for various Ford applications is available. These Ultra Pro Magnum XD rockers are fully rebuildable and boast precision-sorted needle bearings and hardened roller tips. And, they work with most diameter springs and retainers. The XD design utilizes advanced FEA and CAD design and development to improve strength, stiffness and MOI (moment of inertia) optimization for drag and circle track applications.
( 57 )
$52.95
—
$56.95
Add some punch to your Chevy LS with these Howards Cams LS Series direct bolt-on roller rockers. These roller rockers are easy replacements for your stock LS rockers and feature plenty of advancements that help you make more power and get better throttle response. Howards designed these roller rockers to be direct bolt-on pieces, so there is no need to change pushrods, guideplates, rocker studs, or valve covers, and your engine bay can keep that sleeper, bone stock look. These rocker arms are constructed from aluminum and feature needle-bearing fulcrums and roller tips to decrease friction and increase performance. Howards Cams offers these LS Series bolt-on roller rockers in either stock ratio or a high-lift, 1.80 ratio, so you can choose which one best fits your goals.
( 2 )
$52.99
—
$54.99
PRW Pro Series stainless steel rocker arms are manufactured from lightweight, premium quality 17-4ph stainless steel—a superior alloy high in nickel and chromium. This rigid, premium material provides outstanding fatigue resistance, and high-yield strength to help resist deflection. These rocker arms feature full-cage, friction-reducing needle bearings, and extra-large trunnions to spread out the load and reduce wear. Each rocker body is hand-polished, assembled, and carefully inspected to deliver the finest quality available to the racing and performance industry. Reduce your valvetrain mass with durable, lightweight PRW Pro Series stainless steel rocker arms. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * Each set of 16 comes complete with PRW RockerLocs * Stud-mount design provides plenty of clearance for large diameter springs * CNC-machined pushrod cups * Heat-treated steel nose rollers and shafts resist severity of racing and minimize scrubbing
( 12 )
$25.04
Milodon lifter valley baffles prevent hot oil from splashing on the intake manifold, thus eliminating power loss. They keep surplus oil out of valve covers by eliminating oil splash from lifter bores, and maintain oil pressure (during pushrod or rocker arm failure) by keeping lifters in their bores, except with roller cams.
( 10 )
$46.95
High Energy rocker arms from COMP Cams are excellent replacements for stock engine rebuilds with a stock or High Energy camshaft. They eliminate the noise and slop associated with worn or high-mileage stock rockers and match or exceed factory specifications.
( 27 )
$22.95
COMP Cams Performance Series solid lifters are specifically designed for high-end street and race applications. They feature a precision-ground crown radius and surface finish to promote performance camshaft compatibility and high-rpm durability. The lightweight design and premium one-piece pushrod seat provide an extended rpm range, and their accurately located oil band yields a consistent, properly metered oil flow.
( 23 )
$33.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
