Availability
Need some good-looking pulleys for your street ride? You can't go wrong with Summit Racing™ water pump pulleys will help you maintain water pump efficiency with quality and style.
( 226 )
$34.99
—
$57.99
Summit Bucks
ACDelco GM Genuine Parts hydraulic roller lifters are designed as direct replacements for your engine, offering the quality, reliability, and durability of GM OE. They automatically help maintain a "zero" valve lash condition to help prevent valvetrain noise and unnecessary component wear. Stay with the parts brand your vehicle came with; order the lifters tailored for your specific GM make/model.
( 4 )
$23.99
—
$45.99
In today's higher rpm engines, the tip of the valve stem is subjected to a tremendous pounding. The best solution to this problem is COMP Cams' lash caps. These hardened lash caps are precision-machined and ground perfectly flat, to maintain accurate valvetrain adjustment.
( 30 )
$26.95
—
$56.95
Our Summit Racing™ crankcase evacuation systems are designed for drag race use only. These systems maintain negative crankcase pressure throughout the rpm range, increasing piston ring seal, and reducing intake charge contamination.
( 30 )
$60.99
Summit Bucks
ACDelco GM Genuine Parts oil pump pickups are designed, engineered, and tested to rigorous standards and backed by General Motors. These replacement pickups are true OE parts, delivering the correct fit along with predictable performance. They're available in different styles for hundreds of applications from the 1990s and up. Maintain your GM vehicle with genuine factory parts from ACDelco.
( 5 )
$21.99
—
$54.99
Moroso Performance Products manufactures a complete line of heavy-duty oil pump intermediate shafts. These shafts are made of high-quality steel for extended reliability. The steel sleeve is pinned to maintain correct alignment between the oil pump and the shaft.
( 15 )
$31.99
—
$41.99
Moroso drive mandrel spacer kits aid you in pulley alignment for your SBC applications. They maintain the register of the mandrel when using a 1/4 in. thick crank trigger. Spacers are constructed of stress-proof steel with a black oxide finish, and come with a 1/4 in. longer crankshaft bolt.
( 1 )
$28.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$25.50
—
$54.99
King HP-Series cam bearings are precision-machined to tight tolerances to control installed oil clearances, reducing operating bearing pressure. These cam bearings are constructed from seamless steel tubing with a thin layer of lead based babbit material to reduce microscopic deflections. The babbit is quickly cooled in the casting process to achieve a very fine grain structure, doubling tensile strength, therefore, the HP-Series offers much more fatigue strength than conventional bearings, and can withstand racing spring loads, while maintaining the excellent surface characteristics of babbit. King also offers HP-Series bearings with a fluoropolymer coating. Bearings with this coating retain engine oil on the surface, even under extreme heat and pressure—a great advantage! Plus, being a lubricant, it provides backup during start-up and in the event of momentary oil starvation. Use track-tough King HP-Series cam bearings in your engine—and experience the difference.
( 13 )
$39.99
Dayco No Slack automatic belt tensioners can resolve belt squeal, improper tracking, or an accessory that has stopped working completely. Featuring "flat spring" technology, these tensioners allow for an increase in torque to be transmitted to the belt when needed, compensating for stretch and wear, while maintaining constant tension throughout the life of your belt. They are built with tough, long-lasting cast aluminum housings and arms, steel locator pins, and arm plates. Engineered to outperform and outlast OEM parts, take up the slack with Dayco No Slack automatic belt tensioners.
( 33 )
$23.99
—
$55.99
Cummins By Mopar replacement engine oil filters will keep your lubricant clean and prevent harmful dirt and debris from contaminating the motor. Oil is the primary thing every engine needs to operate smoothly and maintain peak performance. These filters are available for hundreds of Dodge and Ram diesel applications from 2004 and up.
( 5 )
$27.99
Crown Automotive crankcase vent tubes will help remove unwanted gases and maintain performance of your engine. They are made from premium materials, are direct-fit replacements, and are available for several Jeep models. Remove gases effectively and ensure your engine operates efficiently with Crown crankcase vent tubes.
( 2 )
$35.99
ACL Performance offers cam bearing sets for a wide range of vehicles from 1955 and up. The high performance tri-metal engine bearings are designed to withstand higher RPM conditions. Each direct-fit replacement bearing features a high-strength overlay plate with reduced thickness for improved fatigue properties. Oder the set recommended for your year/make and engine application. Additional details: *Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil film * 3/4 in. grooved main bearings GROOVED MAIN BEARINGS to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges where required to accommodate large fillet radius on performance crankshafts
( 1 )
$26.79
—
$39.79
Valve springs compress and rebound hundreds of times a second. Make sure your next set of valve springs are built to last—and built to win! Trick Flow® by PAC Racing single valve springs feature flat internal damping coils to prevent spring surge at high revs, maintaining proper spring pressure at critical load levels. PAC springs are CNC coiled from high tensile-strength, extra-durable Pacaloy chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability standards.
( 23 )
$26.99
—
$56.99
Sealed Power high-pressure oil pumps solve your oiling woes in your high performance engine. The higher oil pressure aids in maintaining the oil film thickness in many areas subject to extreme loads. Engines that operate under heavy loads but still use stock bearing clearances will benefit from a high pressure pump. Supercharged or nitrous applications can also benefit from performance of a high pressure oil pump.
( 9 )
$47.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$29.99
—
$54.99
Dorman variable valve timing solenoids will restore the fuel efficiency and normal operation of your vehicle. These direct replacement solenoids are engineered from quality materials for a proper fit and years of effective performance. They easily plug into the electrical harness and come conveniently packaged with the installation gasket (where applicable). Maintain proper oil flow and pressure with Dorman variable valve timing solenoids.
( 27 )
$20.99
—
$50.99
Jesel rocker arm shaft needle bearings operate with minimal lubrication while distributing load evenly over shaft surface, helping to maintain optimal performance of your rocker arms. Available in different quantities and sizes, choose the Jesel bearings that work for your rocker arm shaft application.
( 1 )
$35.00
On Sale
Summit Racing™ offers engine oil change kits for hundreds of foreign and domestic vehicles. The combo kits include 5 to 10 quarts (depending on selection) of a Mobil Advanced full-synthetic motor oil, the official blend of NASCAR. It protects your engine for up to 10,000 miles. Each kit also includes an oil filter. Maintain your late model car, truck, van, or Jeep with a complete lubrication solution from Summit Racing™.
( 18 )
$52.93
Jesel rocker arm replacement parts will help you maintain the performance of your rocker arms. From roller shaft bearings to bolts, thrust washers to retainers, for quality rocker arm replacement parts Jesel has you covered.
Not Yet Reviewed
$20.30
PAC Racing 1200 Series drag race valve springs are great for allowing you to get the most performance out of your engine. Select them when you're upgrading camshafts or doing engine rebuilds. The 1200 Series use a premium alloy that outperforms automotive industry standards; and PAC Racing processes the alloy to aerospace shot-peening standards to achieve superior fatigue dependability. This ensures that the springs maintain the load needed to perform during the most demanding times.
( 7 )
$25.31
—
$30.02
Replacing your timing belt? INA timing belt tensioner dampers will help maintain the proper belt tightness. Made from quality materials and available to cover many different applications, INA tensioner dampers are reliable replacement timing components. Your belt has a designated service life, and so does the tensioner and damper. For optimal power transmission in the timing drive, service it with INA timing belt tensioner dampers.
( 1 )
$30.99
—
$51.99
Holley's Ford 7.3L Godzilla oil dipstick and tube kits are included in their high-mount accessory drive base and complete kits with Holley oiling system. They are also offered individually as a service part. The original equipment Godzilla dipstick/tube will interfere on swaps with low hoods, but these Holley short dipstick and tube kits will allow clearance for Fox Body and many others. When you need a replacement, these are the correct parts to maintain the proper function, fit, and clean look of your Holley Ford 7.3L Godzilla accessory drive.
( 1 )
$42.49
Keep those valve covers running clean! Trick Flow® oil vapor line limiting breather fittings can prevent grime and fumes from making their way into your intake. They will help keep harmful fumes from degrading your valve performance, and maintain your engine's optimal operating conditions. These fittings are available for different lines and engine models. Find the best fit for your engine and get your valves breathing right today.
( 1 )
$27.99
—
$28.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
