Availability
Give your roller lifters the proper orientation with Summit Racing™ lifter guides. Hydraulic roller lifters cannot be allowed to rotate, and our sturdy lifter guides will keep your lifters properly positioned to prevent rotation. They're available in a variety of styles for applications from the 1980s and up. Trust Summit Racing™ lifter guides to keep your lifters captive!
( 40 )
$36.99
—
$54.99
On Sale
Brian Tooley Racing carries a wide variety of options for your LS or LT engine, including this set of lifter guides. BTR lifter guides are designed to accommodate four valve lifters each for either your LS or LT engine to give your roller lifters the proper orientation. These sturdy replacement lifter trays will register your lifters to prevent rotation, keeping them where they belong.
( 5 )
$29.99
$26.99
Cam Motion lifter trays replace your factory trays with more strength and a perfect fit. These are drop-in replacements and will prevent engine damage caused by lifter rotation sometimes found with older, weak trays. Keep your lifters in place with Cam Motion lifter trays.
( 1 )
$39.95
Prevent your lifters from rotating with Comp Cams retrofit lifter guides. Utilize these guides to keep the wheels of your hydraulic lifters rolling and prevent them from sliding over your cam. These "dog bones" are made from steel. Keep your lifters in line with Comp Cams retrofit hydraulic roller lifter guides.
( 3 )
$52.95
Keep your lifters properly positioned with COMP Cams lifter guides. They're available in a variety of materials and configurations for many Chevrolet, Chrysler, Dodge, Jeep, and Ram applications from 1985 and up.
( 1 )
$39.95
Mopar Replacement lifter guides yoke your lifters to keep them aligned. These OE replacements provide the same quality, durability, and performance as the originals they are replacing. When servicing your engine, always make genuine Mopar parts your choice for a hassle-free install and optimal performance.
Not Yet Reviewed
$23.99
Engine Works hydraulic roller lifter guides are the newer design LS2 trays used in all current LS builds (except for the active cylinder management engines). These plastic guides feature increased support in the design. They're available in a set of 4.
Not Yet Reviewed
$48.71
Chevrolet Performance oil pan reinforcement rails will minimize any chance of oil leaks. They offer better clamping between the bolts and prevent pinching of the gasket. These bars are manufactured from steel, and sold individually for the left and right-hand sides of the oil pan.
( 3 )
$20.99
—
$22.99
Champ Pans oil pan rail girdles are engineered to help protect your vehicle from oil pan leaks. The pan rail girdles are precision cut to from steel to work with your oil pan, and are designed to spread the torque force over a larger area to seal the oil pan to the block, regardless of the gasket used. Minimize oil seepage with these oil pan rail girdles from Champ Pans.
( 9 )
$29.61
These valve cover spreader bars from Trans-Dapt spread out to hold down pressure and ensure a leakproof fit. They match the rest of your chrome accessories and are available for a wide variety of applications.
( 32 )
$20.99
Trans-Dapt T-bar valve cover wing nuts make valve cover installation and removal easy and hassle-free. Not only that, but they also have a great chrome finish to add a classy touch to your engine.
( 2 )
$20.99
COMP Cams Endure-X roller lifters set the standard for solid roller lifter technology. The hydraulic roller lifters are designed with oiling and inboard link bars, they're engineered to withstand the demands of aggressive cam lobe designs and increased RPM ranges. The lifters feature a wear-resistant tool steel axle, precision sorted needle bearings, and most applications include EDM oil injection technology that guarantees the bearing assembly receives a constant flow of oil. Endure-X solid roller lifters are heat treated, machined to ultra-high tolerances, and fully rebuildable.
( 40 )
$58.95
—
$64.95
On Sale
Chrome plated for beauty and durability, these Mr. Gasket wing bolts make valve cover removal fast and easy. They are precision-engineered and feature extra-long threads to accommodate extra-thick valve cover gaskets or hold-down clamps.
( 5 )
$22.94
$20.65
—
$34.71
Add a bit of flash and function to your engine with Trans-Dapt Performance chrome valve cover bolts. These OE-quality replacement fasteners are machined from steel for plenty of strength, and chrome plated for great accessory looks under the hood. They're available in a variety of thread sizes, lengths, and hardware quantities. Anchor your valve cover with chrome bolts from Trans-Dapt.
( 33 )
$24.99
Summit Bucks
Fel-Pro valve cover load spreader sets are bars of sealing performance. These steel hold-downs will spread out the load of the bolts to close the gaps. They're available for a variety of vehicle makes and engine applications. Need a sealing solution? Fel-Pro load spreaders will clamp down on leaks.
( 4 )
$32.99
Summit Racing™ rocker arm stud girdle adjusting nuts are designed to keep your rocker arms in place, while accepting Summit Racing™ brand or most other brand double bar stud girdles. They are available in your choice of 3/8 in. or 7/16 in. thread sizes. Select and order the rocker arm stud girdle replacement nuts that are designed to fit your application.
( 1 )
$33.99
—
$39.99
Ross Racing Type 7 tool steel wrist pins are the highest quality available. They are manufactured from special tool steel bar stock. These wrist pins are then taper-bored for a maximum weight-to-strength ratio. They have a special coating applied to the surface that increases hardness and service life. Ross Racing Type 7 tool steel wrist pins also feature chamfered ends that are designed for use with spiral locks pin retainers, ensuring that the wrist pins will not come loose under any rpm.
Not Yet Reviewed
$39.99
Ross Racing wrist pins are made from billet bar stock 4340 chromoly steel, making them extremely strong, with greater ductility than standard pins. These wrist pins have a hard chrome finish that provides excellent life. Create a strong, durable connection between your rods and pistons--go with Ross Racing wrist pins.
Not Yet Reviewed
$33.99
Kibblewhite OEM replacement tappets offer less weight and more strength--a great upgrade for better performance! Utilizing advanced FEA software, Kibblewhite OEM tappets are designed and created from aircraft-quality solid steel bar stock. They then undergo a proprietary heat-treatment process, creating a hard surface and a non-brittle core for maximum toughness and wear resistance. Add the advantages of Kibblewhite OEM replacement tappets to your powersports ride and give your performance a boost.
Not Yet Reviewed
$43.10
Clearance
Continental OE Technology Series Multi-V belts are factory-style replacements covering virtually all vehicle applications. These new straight-ribbed multi-V belts offer original fit and function that professional technicians appreciate for their customers. The serpentine belts are constructed with advanced EPDM rubber compounds that improve durability and deliver a quieter ride. They're available in well over a hundred lengths, with rib options ranging from three to 14. Order the model recommended for your car, truck, van, SUV, or crossover.
( 327 )
$27.99
Continental OE Technology Series idler pulleys are produced to OE form, fit, function, and material specifications to ensure optimum performance and durability. Their plastic pulleys feature glass-reinforced thermoplastic for optimized dimensional control and running surface durability, with a molded-in ball bearing for optimal fit and long life. Steel pulleys are manufactured from precision steel stampings and e-coated for superior corrosion resistance.
( 3 )
$48.99
Rein Automotive OE Quality engine oil separator/breather valves fit European vehicles the way the original manufacturer intended. Designed to be a direct replacement for the breather valve, they are identical to the OEM. Select the one designed for your vehicle.
Not Yet Reviewed
$47.99
Summit Bucks
ACDelco GM Genuine Parts hydraulic roller lifters are designed as direct replacements for your engine, offering the quality, reliability, and durability of GM OE. They automatically help maintain a "zero" valve lash condition to help prevent valvetrain noise and unnecessary component wear. Stay with the parts brand your vehicle came with; order the lifters tailored for your specific GM make/model.
( 4 )
$34.99
These Moroso extra long valve cover wing nuts are available in chrome plated steel or your choice of powdercoated or anodized aluminum colors. They include matching studs to eliminate gaskets alignment problems and to speed installation.
( 18 )
$34.99
—
$50.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
