Availability
URO Parts intake runner control valves offer direct, OE-quality replacement performance for your European marques. Made to exacting specifications with high-quality materials, these valves are guaranteed to fit and operate like original equipment. They are available in different models for a variety of applications. Order the intake runner control valve recommended for your vehicle.
Not Yet Reviewed
$32.99
Clearance
Dorman intake manifold runner control valves are designed to stay closed at lower rpm to improve low-speed and cold-engine performance. At higher rpm, the valves completely open to improve high-speed engine performance. Get your engine performing at its best again with one of these Dorman intake manifold runner control valves.
( 12 )
$39.95
—
$48.95
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 71 )
$49.99
On Sale
These special Grade 8 intake manifold bolts from Mr. Gasket feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runnered race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
( 1 )
$36.83
$33.15
Carter muscle car mechanical fuel pumps deliver original equipment appearance, fit, and performance in a full range of domestic muscle car engines. They contain heavy-duty diaphragms, high-speed "anti-float" springs, large "full flow" valves, and lightweight all-aluminum castings. As with all Carter fuel pumps, they contain a tough, heat-treated lever.
( 622 )
$32.99
—
$41.99
Carter mechanical fuel pumps are 100 percent factory-tested and approved. They are available for most domestic and imported passenger cars, trucks, and industrial engines. Carter fuel pumps are offered in diecast as well as stamped steel to accommodate the wide variety of applications on the road. Stamped steel fuel pumps feature valve chambers with large diameter diaphragms for high-capacity and superior vapor handling characteristics. Their innovative design is utilized as original equipment by automobile manufacturers.
( 550 )
$27.99
—
$43.99
Auto Metal Direct is a leading reproduction, correct-as-original parts supplier of fuel tank filler neck components for your GM vehicle. From seals to grommets, each component is made to ensure a proper fit and function of the original part that they replace. Order the replacement parts you need.
( 26 )
$20.99
Saving money is smart. Choosing Standard Motor carburetor rebuild kits is genius! These packages contain the necessary high-quality components you'll need to restore your carburetor to like-new performance. The economical parts and gaskets are available for many applications, offering the proper form, fit, and function to ensure reliable service. You've got the smarts … and Standard Motor has the parts; do the work yourself, maintain optimum performance, and save money with their carburetor rebuild kits.
( 222 )
$20.99
—
$54.99
US Motor Works offers a complete line of universal external fuel pumps to meet your custom fuel delivery needs. US Motor Works universal electric fuel pumps come with multiple in-line mounting capabilities. Pumps are available for low and high pressure fuel delivery applications and are designed to handle a wide range of modern fuels …100 percent tested for pressure and rate of flow.
( 3 )
$45.99
Auto Metal Direct fuel tank J-bolts are high-quality hardware for your classic's fuel tank. These steel gas tank strap bolts will assist in supporting and securing your tank.
( 5 )
$31.99
Goodmark fuel tank strap hardware kits come complete with the necessary hardware components that are to be used with galvanized or EDP coated straps to properly attach and support your gas tank.
( 28 )
$39.99
These K&N inline performance fuel filters are designed for use in a variety of racing circuits, like NASCAR, drag racing, Sprint Car, marine applications, and all other types of custom racing. They will provide high flow rates, while protecting your engine from harmful contamination. The filters are compatible with methanol, are pressure rated up to 205 psi, and can achieve a high flow rate up to 18 gpm. The filter element is manufactured from stainless steel and features a black anodized aluminum housing with Viton® rubber seals.
( 35 )
$20.99
Tanks Inc. offers a wide assortment of fuel tank mounting straps for specific vehicle applications. The durable straps are available in a variety of finishes, such as galvanized and E-coated, and some of the models also include mounting hardware. Most use stock bolts and factory location. Secure your fuel tank with straps designed for your particular make and model.
( 38 )
$34.99
These OER fuel tank mounting straps are excellent reproductions designed to replace the factory straps. OER fuel tank mounting straps are manufactured from high-quality materials to OE specifications to ensure correct fit, function, and appearance.
( 7 )
$50.79
Hold on! Have your fuel tank straps seen better days? Spectra Premium fuel tank straps are the perfect solution to your problems. Replace the rust and damage with high-quality steel. These fuel tank mounting straps are fabricated using modern manufacturing techniques with exacting tolerances. Additionally, you will find that their fit and function will work superbly on your vehicles. Spectra Premium designs their fuel tank straps so that they will bolt into your vehicle's stock position, saving you time and frustration. It's time to break those rusted and damaged straps loose! Pick up Spectra Premium fuel tank straps and avoid saying "goodbye" to your fuel tank.
( 67 )
$35.99
—
$36.99
Summit Racing™ restoration fuel tank pads are reproductions of the originals that were on your vehicle when it was new. Used to protect the fuel tank and the body of the vehicle from direct contact, the pads prevent wear and squeaking during vehicle motion, and they are made of similar materials as the originals for excellent form and function. Restore your ride with Summit Racing™ restoration fuel tank pads.
Not Yet Reviewed
$23.99
Green Filter factory replacement air filters deliver high performance—forever! Manufactured from recycled materials, the filters are stronger than stock, offer an OE fit, and will maintain maximum airflow for increased horsepower and fuel mileage. Their washable and reusable deep double-layered cotton pleats are encased in steel wire mesh and set in hand-molded flexible rubber bases for an airtight seal that also absorbs vibration. So, stop emptying your wallet and filling the landfills. Instead, increase your vehicle's performance with a Green high performance factory replacement air filter. They're available in a wide range of styles and sizes for both universal and vehicle-specific applications.
( 84 )
$43.61
Delphi mechanical fuel pumps deliver the fuel for classic vehicles—including Chevy and Ford models from the '40s, '50s, '60s, and '70s. Manufactured to quality standards, these replacement pumps are validated, tested, and matched to the correct vehicle application. Do you need a pump for your older-model carbureted system? Delphi mechanical fuel pumps will provide the appropriate performance for your system.
( 57 )
$20.99
—
$30.99
Standard Motor choke kit components are designed to help you replace your broken or worn-out original parts. Whether it's a choke thermostat or a carburetor choke pull-off, the replacements are constructed from OE-quality materials, ensuring the same long-lasting performance as your OE equipment. Trust your vehicle's maintenance needs to Standard Motor Performance.
( 14 )
$20.99
—
$32.99
Body Parts electric fuel pumps are direct replacements for your vehicle's non-working pump. There are no modifications needed for installation, making your job a lot easier. Body Parts fuel pumps will provide the same fit and function as the originals they are replacing. Choose the electric fuel pump designed for your vehicle.
Not Yet Reviewed
$44.99
Body Parts fuel tank straps are quality options economically priced for your rebuild, repair, or service maintenance. They are direct replacements designed with the same dimensions and styling to look and fit just like the originals they are replacing. For you that means a trouble-free installation and lasting service life. Body Parts fuel tank straps are available in hundreds of options, so whether your drive a sedan or truck there is an alternative for you.
Not Yet Reviewed
$31.99
—
$37.99
Need a stock replacement you can count on? GMB OE replacement mechanical fuel pumps are built to deliver fuel to your engine—efficiently and at a price that's hard to beat. An important part of your fuel delivery system, your fuel pump has a big job to do. GMB replacement pumps provide OE fit, quality, and performance to keep installation hassle-free and your fuel delivery system operating at optimum levels. More than a hundred models are available, for fitment on thousands of applications from 1957 and up.
( 18 )
$25.99
—
$41.99
On Sale
Agility Auto Parts offers a complete line of mechanical fuel pumps covering a wide variety of North American vehicle applications. They are engineered to meet or exceed all OEM specifications. Agility Auto Parts mechanical fuel pumps are drop-in replacements right out of the box with all the necessary components included.
( 21 )
$36.99
—
$41.99
$33.29
—
$37.79
OER Authorized fuel filter/vapor separators meet or exceed stringent OER quality standards. Mounting near the fuel pump, they are designed to filter the fuel while simultaneously routing fuel vapor back to the tank, preventing vapor lock the way the factory intended. These OER Authorized reproductions replicate the correct size, shape, mounting bracket, color, and lettering, making them perfect for restorations.
( 1 )
$33.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
