Availability
Holley EFI CAN splitters enable you to add an additional CAN device to your Holley or Sniper EFI systems, without the need to unplug the handheld. This easy-to-install wiring harness simply plugs into the CAN connector on your main harness—then lets you plug in any Holley EFI CAN device, such as a digital dash or USB to the CAN communication cable. Boost the versatility of your fuel injection wiring with Holley splitters.
( 9 )
$45.98
These great looking fuel filters were designed for today's high-volume fuel systems. They're specifically made for carbureted or injected engines making up to 1,000 HP. The Russell Competition fuel filters are offered in -6 and -8 male outlets, which help them flow up to 130 gph. Russell incorporated a disc-type element, which filters down to 40 microns and can be cleaned or replaced. Manufactured from billet aluminum with a polished aluminum, blue anodized, or black anodized finish, the Russell Competition fuel filters make a great addition to your fuel system.
( 131 )
$23.95
—
$46.95
Earl's Performance Vapor Guard fuel filters are an ideal replacement for your inline model. These billet aluminum filters feature a retention bead on the hose barb, providing protection for the inner liner without causing damage. They also stand up to the additives in modern gasolines that can ruin your fuel line. Shield your vehicle from degradation and contaminating particles with an Earl's Performance Vapor Guard fuel filter. Choose the best model for your application. Features and specs: * Ideal pre-filter before the fuel pump in carburetor or EFI applications * Available for 5/16 in. and 3/8 in. diameter hoses * Black anodized finish * Replaceable / washable sintered bronze filter element * Filter flows 125 gph at 4.1 psi (free flow) and 88 gph at 61.4 psi * Available in various micron-rated models (i.e. 10 or 100 microns)
( 51 )
$21.37
—
$26.63
Special Offer
Sunoco race utility jugs feature industrial strength design with superior quality control so you won't have to put up with leaking jugs. Every race jug receives a multi-point quality inspection and is 100 percent pressure tested. They are built to withstand a beating without excess weight--with a tough industrial look and feel. Additional features of Sunoco Race utility jugs include: * Offered with or without Fastflo lids * Made from chemical-resistant high-density polyethylene * Durable multipurpose cap with integral rubber O-ring * Tri-ribbed bottom for strength also doubles as a multi-grip pouring handle * Dual body bands prevent body swelling, keeping fluid level markings accurate * Fluid level markings for US gallons and liters * Available in a variety of colors Note: These race utility jugs are not portable fuel containers as described by ASTM, EPA, ARB, CARB, or other state or federal agencies.
( 36 )
$27.95
—
$62.99
Redhorse Performance 4151 Series RHP inline street fuel filters feature CNC-machined aluminum bodies with a 100 micron pleated stainless steel mesh screen element. They're available in a -6 AN and a -8 AN size with flares built into the bodies, so additional adapters are not required. Hand-polished bodies are anodized (choice of colors) for protection and appearance. Filters are rated to flow 130 gallons per hour at 75 psi for both sizes.
( 7 )
$41.13
—
$47.31
Mikuni is the undisputed leader in fuel disbursement technology, and their vacuum fuel pumps are the popular choice when replacement fuel pumps are needed. In addition, Mikuni offers different styles, sizes, flow rates, and other options to suit your specific applications. When you have to replace a fuel pump, or if you're looking to upgrade your OEM pump, you can entrust Mikuni vacuum fuel pumps to fulfill all of your requirements.
( 10 )
$36.99
—
$54.99
Complete your Sniper EFI install with Holley's 1 in. drop air cleaner base to gain some extra underhood room and unleash the full potential of your new fuel injection system without modification! These bases are designed specifically for use with the Sniper EFI 4BBL throttle body and a 14 in. air cleaner element and lid. Each stamped steel base features a generous 1 in. drop with the necessary clearance bulges for use of the front mounted fuel inlets on the Sniper EFI unit. The air cleaner bases are available in your choice of a chrome or black powdercoat finish to best match your Sniper EFI unit. Additional details: * 1 in. drop base with necessary clearances for the use of your Sniper EFI 4BBl TBI's front mounted fuel inlets * Compatible with Holley Vapor Guard -6 90 degree to 3/8 in. (P/N 759166ERL) fittings * Designed for use with 14 in. diameter air cleaner filter elements * Stamped steel construction for improved durability
( 3 )
$31.84
—
$41.41
Clearance
Our durable Summit Racing™ 5-gallon square utility jugs are ideal for holding water or oil. They're built from a rugged plastic material to provide you with many years of service. Select the color you prefer. Additional features include: * Handle for ease of pouring contents * Specially designed angled lower front corner promotes pouring stability
( 3 )
$31.99
$23.50
On Sale
Mr. Gasket micro electronic fuel pumps are compatible with gasoline, alcohol, diesel, and E85 fuels and additives (depending on the model). They feature solid-state, worry-free electronics and eliminate vapor lock and flooding. Great as stand-alone or booster pumps, the micro units are self-priming and have a simple 2-wire design. They work with 12 V negative-ground systems and include mounting hardware. Mr. Gasket micro electronic fuel pumps will supply adequate fuel, time and time again.
( 79 )
$63.79
—
$69.39
$47.84
—
$52.04
Holley Sniper 2 EFI input/output wiring harnesses give you access to two ground trigger inputs, two ground trigger outputs, the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things such as AC Kick and nitrous stage activation. The output grounds can be used for electronic fan control, or A/C shutdown at WOT. This harness includes an additional 0-5 V TPS output commonly used for transmission control units, and a tach output wire to drive most common aftermarket tachometers. Additional details: * Wires come individually labeled for easy identification * 4 x 5 ft. long output wires * 2 x 5 ft. long input wires
( 4 )
$44.85
Summit Racing™ Extreme Duty intake manifold bolts are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with bolts and washers to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Additional details: * Tensile strengths above 170,000 psi * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide or nickel plated surface finish * Reduced size 12 point heads create extra room for installation
( 1 )
$29.99
Holley replacement power valves are an important component in the power enrichment circuit of Holley's performance carburetors. They operate by using engine vacuum to control their opening and closing rate. When they open, additional fuel is supplied to the main system during heavy load or under full power situations to eliminate hesitation and bogging--ensuring the smooth delivery of power without any drivability concerns. They're available in many different vacuum ranges to time the system's operation to your specific requirements, and they come in your choice of single-stage, two-stage, and high-flow designs. A gasket is included.
( 130 )
$31.18
—
$31.79
Moroso Holley needles and seats are the parts you need for your Holley carburetor! Two versions are available—the Viton® needle design is highly recommended for gasoline fueled engines because it is resistant to dirt and conforms to the seat for superior sealing. If you use exotic fuels or additives such as alcohol, benzine, acetone, etc., you must use the steel-needle version. Select the needles and seats recommended for your application.
( 2 )
$33.99
—
$34.99
Snow Performance dual nozzle upgrade kits allow you to add an additional nozzle to be mounted in any Snow Performance Boost Cooler kit. They include a tee splitter, a junction piece with quick-connect fittings, a nozzle holder, and a section of hose. The Snow Performance dual nozzle upgrade kits are perfect for applications that need more flow than one nozzle can provide, or to get even distribution for a dual plenum/throttle body/carburetor setup.
( 9 )
$41.66
Dirt, dust, sand, and other particulate matter are enemies of your engine. That's why much attention is paid to air filters and related components. Auto Metal Direct stocks a full line of air cleaner replacement parts to keep your system in tip-top shape. In addition to complete air filter units, AMD can supply various filter elements, hardware, bases, lids, vent pipes, seals, and more. Many of these authentic factory reproductions are available to service makes such as Buick, Cadillac, Chevy, Oldsmobile, and Pontiac. So, whether you're restoring a vintage car or sprucing up the engine compartment on your current ride, remember the assortment available from Auto Metal Direct.
( 1 )
$33.99
Sunoco Fastflo jug lids include a uniquely designed spout that seals to your tank, then allows fuel to flow quickly and easily. As you remove the jug from the tank, the valve in the Fastflo's no-spill spout automatically closes, keeping fuel in the jug and off thevehicle. For smaller neck applications, Sunoco Fastflo jug lids are also offered with vehicle tank adapters. They work well for race and street vehicles, karts, lawn mowers, and marine applications. Additional features of Sunoco Fastflo jug lids include: * Flow stops automatically after reaching the end of the spout * Just pull up and the valve shuts off fluid flow * No vent to open and close or to leak when pouring * Stops over filling and prevents spilling
( 4 )
$24.95
—
$29.95
Fragola fuel cell pick-up hose kits allow you to increase your current line or add additional lines to keep a dedicated line for fuel when running nitrous. These kits come complete with a bulkhead fitting, a nut, plastic sealing washers, a straight Push-Lite hose end, and Push-Lok blue hose. Do you need more pick-up lines? When you need more lines, plumb your plastic fuel cell with Fragola pick-up hose kits.
( 5 )
$22.99
—
$40.99
US Motor Works in-tank fuel pump kits for domestic and import applications include all of the components required to rebuild your existing fuel pump module or hanger/sender assembly. All units are manufactured using the highest quality raw materials that are compatible with today's fuel blends. Plus, US Motor Works is an ISO 9001:2015 certified company. In addition to the fuel pump, all US Motor Works in-tank fuel pump kits include: * New strainers for each application * Gaskets * New wiring harnesses made with high-quality materials * High-quality fuel injection lines included with hose clamps * Nitrile or Viton® rubber components for long life and fuel resistance
( 5 )
$24.99
—
$59.99
Edelbrock VRS-4150 carburetor gasket kits contain eight metering block to main body, and eight fuel bowl to metering block gaskets. The VRS carbs use a unique metering block gasket to accommodate the 4-circuit fueling system. Gasket material is non-stick has superior sealing qualities. Additional notes: * Use VRS production gaskets for best fit and performance * Kit includes enough gaskets for four carburetor services * Strong durable VR-55 material for a lasting seal * This gasket kit uses OEM gaskets from the VRS-4150 line of 4-circuit carburetors
( 1 )
$51.95
Interested in more power? aFe Dynamic air scoops will take your already-great Dodge Challenger to the next level! These additions make better use of your factory "air catcher" headlight inlet by guiding cool ambient air from outside the vehicle directly into your intake system—and we all know the effect of more cool, dense air: increased performance and power! Constructed of cross-linked polyethylene, these Dynamic air scoops work with both factory and aFe Momentum GT intake systems; just snap into the air box, with no modifications required. Order the air scoop designed for your Challenger year and submodel application.
( 16 )
$54.00
Most fuel tanks mount flush against the floor. With Tanks Inc. weld-in fuel pump recesses, you are equipped with an inexpensive, easy solution for installing a PA Series fuel pump or for routing your fuel lines where additional clearance is needed. They are constructed of 18-gauge steel and are 10 in. x 7 in. with a 2 in. flange on all four sides. Simply mark your tank where you want the recesses to go and then trim to fit. The recesses' area is large enough to accept a 5-hole sending unit as well.
( 3 )
$48.99
MagnaFuel Y blocks offer a smoother flow path and less weight than comparable brands. They're machined from 6061-T6 billet aluminum and are hard anodized for protection from alcohol and other exotic fuel additives. Other features include a leakproof, one-piece design and AN fitting sizes on all sides. Complete your fuel system with one of these MagnaFuel Y blocks.
Not Yet Reviewed
$51.99
—
$52.99
AED offers a choice of accelerator pump kits to suit your needs. In cases where you need additional total squirter volume (big carburetor, tight converter, heavy car), AED pump kits come complete to provide the additional volume.
( 5 )
$40.79
These FAST fuel rail lines are designed to connect your FAST fuel rails to your fuel source or an additional fuel rail. They are manufactured using stainless steel braided hose and black anodized -6 AN aluminum female fittings. The lines have the fittings pre-crimped, making them easy to install with no fuel rail modifications necessary.
( 8 )
$58.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
