Availability
These Trick Flow® cam bolts are designed for aftermarket and OE non-PI camshafts that require 12mm bolts. These cam bolts are made from quality-grade 10.9 steel with a black finish. These cam bolts are a great choice when installing aftermarket or non-PI camshafts.
( 11 )
$21.99
Have you ever needed just one replacement bolt and didn't want to buy a whole kit? If so, then Trick Flow® has the solution for you with their replacement intake manifold bolts. They come available for most Trick Flow® manifolds in various lengths to fit your needs.
( 2 )
$22.99
These Trick Flow® stainless steel intake manifold bolt kits are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® stainless steel intake manifold bolt kits are both corrosion and heat-resistant and come highly polished.
( 1 )
$41.99
Securely attach your overhead cam with Trick Flow® camshaft tower bolts. They are designed to fit the OEM camshaft towers and are manufactured to factory specifications, ensuring a direct fit.
Not Yet Reviewed
$40.99
Are you losing transmission fluid? You may want to try to torque the pan bolts to see if they're up to factory specs before attempting a gasket replacement. Trick Flow® offers replacement transmission pan bolt kits to keep your transmission pan securely attached right where it belongs. These replacement hardware kits provide more reliability than OEM and add a professional look to your transmission pan.
Not Yet Reviewed
$27.99
These Trick Flow® valve cover bolts not only keep your valve covers securely fastened, but they also do it with great style. They're made of high-quality grade steel and have a black oxide finish to offer up lasting performance and stylish good looks.
( 3 )
$27.99
Let the ponies run wild! These black 100 percent cotton Trick Flow Ultimate Bolt-On Performance T-shirts are perfect for any casual-wear setting. They feature the small Trick Flow® Specialties logo on the left chest, and the title design on the back below a larger logo. You know the source for ultimate bolt-on performance—clue everyone else in with a Trick Flow Ultimate Bolt-On Performance T-shirt.
( 11 )
$22.99
These Trick Flow® differential bearing cap stud kits increase your differential's strength by replacing the stock differential carrier bearing cap bolts with studs. These kits include the necessary studs, nuts, and washers for a complete installation.
( 7 )
$40.99
—
$43.99
These Trick Flow® 5.0L Street EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Four 5/16-24NF 12 pt. nuts * Two 5/16-18 x 7 in. long 12 pt. bolts * Two TFS Street/Track Heat upper/lower flange gaskets * Four 5/16 x 2 5/8 in. long studs
Not Yet Reviewed
$43.99
These Trick Flow® 5.0L Box R-Series EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Six 5/16-24NF 12 pt. nuts * Two 12 pt. bolts 5/16-18 x 7 in. long * Two TFS R-Series upper/lower flange gaskets * Six 5/16 x 2 in. long studs * Ten 1/4-20 x 1 1/4 in. long button head screws * One flange plate gasket
Not Yet Reviewed
$42.99
Do you have a Trick Flow® EFI heat spacer? Well, if you do, then you'll need one of these hardware and gasket kits next time you remove the upper plenum from your manifold. Each kit includes quality gaskets and hardware to make installation a snap.
( 4 )
$34.99
—
$47.99
You made an investment with some cool looking Trick Flow® fabricated aluminum valve covers for your ride, so why skimp on the installation hardware? These Trick Flow® valve cover accessory kits are the appropriate attaching hardware for ensuring a correct installation. They will also add the perfect finishing touch to your engine compartment. These kits offer up great performance along with great style.
( 1 )
$35.99
These Trick Flow® harmonic balancer counterweights are used with the Trick Flow® Track Max® harmonic dampers. They are designed for adjusting or replacing the weights on externally balanced engines.
( 1 )
$21.99
—
$22.99
These timing chain damper adapter brackets allow for the use of LS2 timing chain dampers on any GM LS engine block. The brackets use the three lower cam/thrust retainer plate bolts for attachment. The brackets can also be used with aftermarket LS2 timing chain dampers with the included hardware.
( 25 )
$41.99
These Trick Flow® 4.6 Mustang GT/Cobra fuel pressure sensor adapters allow the installation of Trick Flow® fuel rails on 4.6L engines where it is desirable to retain the stock returnless fuel system. They are designed to provide the proper sealing port, bolt pattern, and mounting hardware to accept the stock Ford fuel pressure sensor. They will permit the OE fuel pressure sensor to be remote mounted or coupled directly to the Trick Flow® fuel rail, and they feature -8 AN ORB inlet/outlet ports to create a positive seal and eliminate the need for thread sealant. Keep your OEM fuel pressure sensor with one of these Trick Flow 4.6 Mustang GT/Cobra fuel pressure sensor adapters.
( 2 )
$49.99
Trick Flow® patented hex cam gear spacers are great for holding the cam in position when you're setting the cam timing and torquing the cam gear bolts.
( 3 )
$27.99
Adapt your stock bracket on your Ford truck for your Twisted Wedge® heads with Trick Flow® power steering reservoir brackets. These hefty steel brackets change your stock bracket to bolt it to the valve cover bolts, rather than to the side of your cylinder head. Trick Flow® power steering brackets include flange bolts and captive nut clips for an easy install.
( 2 )
$22.99
On Sale
Trick Flow® hooded sweatshirts are warm and stylish. Perfect for any event, these soft black cotton hoodies feature the Trick Flow® branding on the front and back. So, for the ultimate pull-on style from the Ultimate Bolt-on Performance!® store, choose one of these Trick Flow® hooded sweatshirts. They are available in men's sizes Small through 3X-Large. Imported.
( 5 )
$38.99
—
$44.99
$29.99
—
$34.99
These Trick Flow® differential load studs are exact replacements for your Trick Flow® rear-end support covers. Jam nuts are also included, unless otherwise specified.
( 4 )
$25.99
These Trick Flow® cylinder head work stands are ideal for porting, polishing or CC-ing. The stands work with most popular cylinder heads and disassemble for easy storage.
( 10 )
$35.99
Top-off your engine with a pair of Trick Flow® chrome valve covers. They're available baffled to prevent oil breather blow-by (except small block Ford) and feature embossed logos, new gaskets, and a triple dose of chrome plated Trick Flow® style. The valve covers are offered in standard and tall height, for applications from the 1950s thru the 1980s.
( 26 )
$42.99
—
$47.99
If you're looking for quality header gaskets, look no further--have we got a set for you! These Trick Flow® header gaskets don't expand or contract, preventing leaks during the warm-up and cool-down stages. Their steel core construction eliminates burnout, and their heat-resistant coating stops leaks and expansion. Trick Flow® computer-designs the port alignment of these gaskets for a more accurate fit. Who could ask for more?
( 8 )
$27.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
