Availability
On Sale
Mr. Gasket micro electronic fuel pumps are compatible with gasoline, alcohol, diesel, and E85 fuels and additives (depending on the model). They feature solid-state, worry-free electronics and eliminate vapor lock and flooding. Great as stand-alone or booster pumps, the micro units are self-priming and have a simple 2-wire design. They work with 12 V negative-ground systems and include mounting hardware. Mr. Gasket micro electronic fuel pumps will supply adequate fuel, time and time again.
( 79 )
$63.79
—
$69.39
$47.84
—
$52.04
Are you planning to run an electric fuel pump on your project vehicle? If so, then Mr. Gasket fuel pump relays will provide assurance that your fuel pump is receiving full voltage from the battery. These kits include a 30 or 40 amp relay and all necessary wiring to ensure that your installation goes smoothly. Some kits may include a circuit breaker and terminal ends. Mr. Gasket fuel pump relays can eliminate mysterious voltage drops that long wire installations can create.
( 6 )
$42.49
Mr. Gasket billet fuel filters are made from the highest quality materials available. Machined from T6061-T6 billet aluminum alloy, these fuel filters incorporate a 304 stainless steel pleated filter disc rated at 10 microns, and flow over 15 gpm or 800 gph. These fuel filters can be used on low-pressure carburetors or high-pressure fuel injection applications. They come available in barbed or AN fitting ends.
( 1 )
$23.59
These T style fuel blocks from Mr. Gasket are precision die-cast, chrome plated blocks ideal for plumbing tri-power setups, dual inlet carbs with nitrous, or any combination requiring multiple fuel distribution. Minimum restriction is assured, and corner holes and screws are provided for easy installation.
( 4 )
$41.64
—
$45.97
Mr. Gasket fuel pressure gauges are conveniently small to fit most anywhere. They read in 1/2 lb. psi increments with a range of 0 to 15 psi, and have 1/8 in. NPT male fittings. They are available in standard or liquid filled versions to resist vibrations. Get performance you can trust from Mr. Gasket.
( 61 )
$29.11
Mr. Gasket's universal stainless steel braided fuel lines feature high-quality construction. These fuel lines can be cut to length and include hose clamps. Mr. Gasket universal stainless steel braided fuel lines are NOT for use in fuel injected applications.
( 6 )
$39.91
Mr. Gasket fuel pressure gauge adapters offer an easy way to add a fuel pressure gauge in soft fuel lines. Made from gold anodized aluminum, the adapters have 3/8 in. hose ends and a center-tapped 1/8 in. NPT port. Mr. Gasket fuel pressure gauge adapters include two hose clamps for a quick and easy installation.
( 5 )
$22.66
On Sale
Mr. Gasket fuel pressure gauge/inline adapter kits allow you to easily install a fuel pressure gauge inline almost anywhere. The gauge reads in 1/2 psi increments with a range of 0 to 15 psi and are available in standard or liquid filled versions. The gold anodized aluminum inline fuel blocks have 3/8 in. hose barb on the inlet and outlet. Mr. Gasket fuel pressure gauge/inline adapter kits include gauge, adapter, and clamps for a quick, simple installation.
( 38 )
$75.65
$49.17
On Sale
Durable enough for competition and attractive enough for show, these Mr. Gasket chrome plated fuel lines are mandrel-bent for maximum fuel flow. They're designed specifically for use with Demon Carburetion Speed and Road Demon carbs. They include the necessary fittings, and are available with or without a 0 to 15 psi fuel gauge.
( 4 )
$84.49
$46.47
Mr. Gasket fuel pump safety switches are designed to shut off your electric fuel pump when the oil pressure drops below 15 psi. They are easy to install into the oil pressure sending unit, and will work with all 12 V systems.
( 6 )
$41.64
On Sale
Mr. Gasket low-loss fuel fittings provide maximum fuel flow with minimal restriction. These fittings are a thin wall design, with large internal diameters and easy gradual bends for maximum flow. They are made from corrosion-resistant brass to provide maximum durability, and include one fitting and one hose clamp.
( 8 )
$41.64
These Mr. Gasket universal throttle cable kits contain all of the necessary hardware for a complete installation onto your carburetor. They feature a 36 in. long cable, wrapped with a 24 in. stainless steel braided sleeve, that can be cut to length to fit your specific application.
( 96 )
$45.31
Save yourself the hassle of purchasing a new, costly intake manifold by simply adapting your existing carburetor to fit your engine. These high-performance carb adapter kits from Mr. Gasket install quickly and easily, and include all of the gaskets, studs, nuts, and washers you'll need to complete the job.
( 85 )
$34.51
—
$37.77
On Sale
Precisely designed Mr. Gasket carburetor spacers provide a smooth transition of air and fuel from the carburetor to the intake manifold, increasing flow for more performance. They also help to insulate the carburetor from engine heat and provide clearance for linkages. These spacers come with attaching hardware and gaskets and are available in phenolic plastic and aluminum.
( 107 )
$46.39
—
$56.69
$32.47
—
$36.85
On Sale
Mr. Gasket utility jugs are made from high-quality materials and include a heavy-duty cap. Each jug features a main handle and bottom grip pocket for easy pouring as well as graduated markings for precise pours. The caps feature a removable plug and rubber seal to allow the jug to be used with or without the filler hose.
( 111 )
$37.95
$24.67
—
$43.64
Mr. Gasket offers these attractive air cleaners that feature a deep-dish, highly polished chrome top accented by a chrome plated wing nut. For safety, a flame retardant, replaceable paper element with a high cfm rating is used in these units. They are available in a variety of sizes to suit your application needs.
( 17 )
$29.11
—
$52.75
On Sale
These heat dissipaters from Mr. Gasket are a lamination of a special heat-absorbing gasket material separated by layers of aluminum alloy, which draws heat from the air/fuel mixture and releases it into the surrounding air. This allows a cooler, denser mixture to enter the cylinders, which in turn helps boost torque throughout the RPM band. Because of their insulating properties, these dissipaters also help eliminate vapor lock.
( 23 )
$39.41
$21.68
—
$41.64
On Sale
Mr. Gasket's Easy-Flow air cleaners feature a gleaming, chrome finished top cover with a plated steel base that encloses a high cfm, replaceable, flame retardant paper element. Providing the maximum in efficiency and beauty, these easy-flow air cleaners are available in a variety of sizes to suit your application needs.
( 67 )
$53.69
$23.65
—
$44.08
Upgrade your GM LS engine with a set of Mr. Gasket valley cover bolt sets. The stainless steel fasteners look great and come with small diameter stainless AN washers, ideal for replacing missing or worn OEM fasteners. They feature a small diameter button head, giving you the extra clearance you need.
( 3 )
$41.70
These Grade 5 hex head and socket head intake manifold bolts are bright zinc plated for protection and appearance. Kits include hardened flat washers for uniform torque and to prevent galling on aluminum intake manifolds.
( 14 )
$20.11
—
$29.59
On Sale
These paper elements are direct replacements for your Mr. Gasket air cleaner. They will last longer than the filters you can get at the local shop, and they are guaranteed to fit your Mr. Gasket assembly.
( 43 )
$20.47
—
$34.72
On Sale
These Mr. Gasket chrome plated steel throttle cable brackets mount to the rear of your Holley, Edelbrock, AFB, Quadrajet, or inline dual carburetors. These brackets are used to mount your throttle cable and kickdown assemblies.
( 11 )
$34.51
$21.55
—
$25.88
These Mr. Gasket quick-release throttle cable ends will give you easy access to your carburetor. They are made of steel, have a gold iridited finish, and use a special quick release to the cable from the carburetor stud.
( 6 )
$34.72
Get super performance from Mr. Gasket! These Grade 5 hex head bolts are black coated plated for protection and appearance. They feature a generous underhead radius for added strength, and hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
( 4 )
$49.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
