Availability
On Sale
Mr. Gasket Ultra-Seal gasket sets are made of a cellulose/nitrile material that is less compressible for excellent sealing and durability. This material has an anti-stick coating, plus a silicone bead around each intake port, except where noted, for a tight, leakproof seal. These gaskets are the perfect solution for intake-sealing problems associated with the small sealing areas between ports, and the different expansion rates of intake manifolds and cylinder heads. The choice of champions, these sets come complete with all necessary seals and can be trimmed to fit modified ports where needed.
( 73 )
$59.35
$31.06
—
$53.45
On Sale
Get super performance from Mr. Gasket! These Grade 5 hex head bolts are black coated plated for protection and appearance. They feature a generous underhead radius for added strength, and hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
( 4 )
$31.44
$28.30
—
$49.95
On Sale
Whether you're in the process of rebuilding your whole engine or just replacing a gasket, Mr. Gasket has you covered with these supercharger to intake manifold gaskets.
( 8 )
$30.56
$27.50
—
$33.32
On Sale
These Grade 5 hex head and socket head intake manifold bolts are bright zinc plated for protection and appearance. Kits include hardened flat washers for uniform torque and to prevent galling on aluminum intake manifolds.
( 14 )
$22.94
$20.11
—
$29.59
On Sale
Mr. Gasket offers header/manifold exhaust gaskets which are fabricated from large-fiber gasket material bonded by a high-heat resistant compound. They are precision die-cut for each application, and provide excellent sealing and durability.
( 12 )
$67.99
$28.33
—
$47.44
On Sale
These special Grade 8 intake manifold bolts from Mr. Gasket feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runnered race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
( 1 )
$36.83
$33.15
On Sale
Mr. Gasket Ultra-Seal exhaust gaskets are designed and constructed to improve the sealing of exhaust header flanges. Unlike standard exhaust gasket material, Ultra-Seal gaskets incorporate a graphite-impregnated facing and a steel-expanded metal core that reinforces and increases their tensile strength. This allows the gaskets to conform to warped flanges, giving them better sealing capabilities without deteriorating or cracking under the excessive heat and pressure that's common in exhaust systems. Ultra-Seal gaskets are available for a wide range of port styles and sizes. Additional features and benefits: * Expanded steel core provides stability and maximum torque retention to eliminate gasket failure * Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head * High-recovery material allows header or manifold flange to stay sealed if flange loses clamp-load * Can be trimmed for modified port applications * Designed for OE replacement, high performance street, drag race, road racing, and oval track use
( 174 )
$49.95
$23.07
—
$52.75
Mr. Gasket intake gasket sets are manufactured from high-quality cellulose/nitrile composition gasket material. They provide excellent sealing and durability and can be trimmed if needed for modified ports. Manifold end rail seals and a distributor gasket are included. These sets are ideal for OEM replacement and high performance street, drag race, and oval track applications.
( 12 )
$41.64
—
$49.95
On Sale
Mr. Gasket aluminum layered exhaust gaskets are reusable header or manifold seals that conform to surface irregularities and warped flanges. They will not shrink, deteriorate, or blow out. They're available for a wide variety of port styles and sizes. Features include: * Manufactured from 0.125 in. "dead soft" aluminum layers * Compresses to .060 in. to create a tight, leak-proof seal * Can withstand intense exhaust heat * Resists deterioration * Easy removal * For high performance street, drag race, road racing, and oval track use
( 61 )
$48.61
$26.54
—
$48.61
On Sale
Mr. Gasket standard intake gasket sets are manufactured from a blend of nitrile rubber and fiber, for excellent sealing and durability. They're precision die-cut for each specific application to ensure a great fit, and can be custom-trimmed for modified ports where needed. The sets come complete with all necessary seals and block-off plates.
( 68 )
$48.59
$26.72
—
$49.95
On Sale
Mr. Gasket MLS (multi-layered steel) header gaskets are designed for extreme cylinder pressures produced by high horsepower, high compression, turbo-charged, supercharged and nitrous equipped engines. MLS header gaskets are manufactured from three stainless steel layers that resist corrosion, will not burn through or push out, and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal excessive exhaust pressure produced from cylinder heads.
( 15 )
$56.69
$33.87
—
$51.05
On Sale
Mr. Gasket has three types of exhaust gaskets--standard, Ultra Seal, and Copperseal. Use the standard for a stock rebuild and the Ultra or Copperseal for extra blowout protection.
( 20 )
$41.94
$21.53
—
$52.60
On Sale
Mr. Gasket CopperSeal exhaust gaskets are made from .043 in. thick solid copper, and are track-proven to eliminate exhaust leaks in Top Fuel Dragster, Funny Car, and Alcohol class race cars. These gaskets feature an embossed O-ring design to increase sealing pressure around the exhaust ports, creating a tight, leak-proof seal. They're also ideal for tow vehicles and motor homes. CopperSeal gaskets are available in a variety of port styles, as well as more than a dozen size configurations. Order the model designed for precise fitment with your exhaust header.
( 42 )
$69.29
$30.61
—
$49.95
Mr. Gasket's combination intake and exhaust gaskets are manufactured from a blend of nitrile rubber and fiber for excellent sealing and durability. They're precision die-cut for your application and include seals and block-off plates where needed.
( 4 )
$48.59
On Sale
Save yourself the hassle of purchasing a new, costly intake manifold by simply adapting your existing carburetor to fit your engine. These high-performance carb adapter kits from Mr. Gasket install quickly and easily, and include all of the gaskets, studs, nuts, and washers you'll need to complete the job.
( 85 )
$36.74
$31.06
—
$37.77
On Sale
Burning your hands on headers or the exhaust manifold when bolting them on just became a thing of the past. Mr. Gasket HEADLOCK locking header bolts simplify header installation with high-strength, 2-in-1 self-locking bolts that eliminate the need for lock washers. Designed for the performance engine builder, these innovative, patent-pending fasteners have 24 equally spaced serrations in the face of the hex head. The bolts grab and lock on to your manifold surface, virtually eliminating the chance that one might back out from vibration or because of the varying expansion rates of different metals. Mr. Gasket HEADLOCK locking header bolts are available for numerous domestic applications, including Chevrolet, Chrysler, Ford, AMC, Oldsmobile, and Pontiac. They're manufactured from stainless steel, designed to withstand tensile strengths of 150,000 pounds per square inch, and come with a bright polished finish.
( 50 )
$47.95
—
$58.79
$31.17
—
$38.21
On Sale
Precisely designed Mr. Gasket carburetor spacers provide a smooth transition of air and fuel from the carburetor to the intake manifold, increasing flow for more performance. They also help to insulate the carburetor from engine heat and provide clearance for linkages. These spacers come with attaching hardware and gaskets and are available in phenolic plastic and aluminum.
( 108 )
$46.39
—
$56.69
$32.47
—
$51.05
These Mr. Gasket starter heat shields are used to protect the starter from the high temperatures put out by exhaust manifolds or headers. They are made from two sheets of aluminum with a heat-resistant material sandwiched in between.
( 21 )
$49.95
On Sale
Mr. Gasket engine lift plates are designed for use with 2-barrel and 4-barrel manifolds. These steel plates feature bolt-on construction and a durable gold iridited finish.
( 31 )
$37.80
$20.79
Mr. Gasket offers these cork gasket material sheets for any application where a part must be sealed in order to prevent oil leakage. They're ideal for making intake manifold end seals, timing cover gaskets, and more.
( 2 )
$34.68
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
