Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Motion Pro HD Rear Wheel Alignment Tools
Motion Pro HD rear wheel alignment tools are for use on Harley-Davidson® Softail, Sportster, and Dyna models. Features include: * Designed to help set rear wheel alignment * Fast, accurate, and easy to use * Eliminates the need to use a tape measure * Proper wheel alignment extends chain, sprocket, and belt life
( 2 )
$21.99
Motion Pro Pilot Screw Adjusting Tools
Getting the air-fuel mixture perfect is difficult enough without distractions; throw in a hard-to-get-to location, and things become more complicated. Motion Pro Pilot screw adjusting tools are designed to reach fuel and air mixture screws on most multi-cylinder motorcycles that are difficult to get to. They feature a rotating handle designed to turn the straight-slot tip that is 110 degrees offset from the handle. With their 17 in. length, these tools can get into a lot of tight spaces. When you need to make adjustments in tight places, you'll need Motion Pro Pilot screw adjusting tools.
( 6 )
$32.99
Motion Pro Tool Compartment Size Chain Breakers
The original Motion Pro tool compartment size chain breakers with folding handles are small enough to wrap into your tool bag for those longer rides. They feature a heat-treated 4 in. chrome moly body with a folding handle and fit chain sizes 420, 428, 520, 530, and some 630 with a replaceable durable drive pin, which is heat-treated and hardened for long life. The maximum pin extension to drive out chain links is 18mm. It will be nice to have a chain breaker that takes up so little space along on trips.
Not Yet Reviewed
$49.99
Motion Pro Brake Caliper Piston Tools
Motion Pro brake caliper piston tools have an ultra-low profile design to remove pistons from mono-block disc brake calipers. And these tools are crafted from billet aluminum and stainless steel and finished with a durable blue anodized coating, making good-looking as well as functional. Features also include: * Fits pistons with a center bore of 15mm to 28mm * Easy to use single locking screw * Works on aluminum, steel, and titanium pistons * Non-marring design will not harm pistons or caliper
Not Yet Reviewed
$39.99
Motion Pro Hose Removal Tools
Designed by Motion Pro, these hose removal tools are actually two tools in one! The dual-ended specialty tools feature one end to loosen stuck hose, and one to assist in pulling the hose off the fitting. They facilitate the removal of fuel, oil, and cooling system hoses, while also reducing the possibility of damage to hoses and related components. Additional details: * Compact aluminum handle provides solid grip and excellent control * High-quality steel tips with durable black oxide coating * Lock nut at base of each tip allows 360 degree adjustment or removal of one tip for use in tight spaces
Not Yet Reviewed
$29.99
Motion Pro SlackSetter Pro Chain Tools
Motion Pro offers "innovative tools and products that help you maintain and repair motorcycles, ATVs, and UTVs". According to Motion Pro, "Making sure your chain and sprockets are clean and lubed is important for a long life and good function, but making sure that there is the correct slack in the chain is just as important." Neither too loose nor too tight is good. Motion Pro SlackSetter Pro chain tools help you set the slack just right by accurately and quickly measuring chain slack, resulting in improved chain life and performance. The patented design features two scales that measure both chain slack and chain to swingarm clearance in millimeters. Add one to your tool arsenal. Additional features: * Lightweight compact design fits easily in your toolbox or road kit * Works on most street and dirt bike applications up to 75mm chain slack * Made from engineered nylon with aluminum measuring scale * Anodized laser-etched precision measuring scale * Refer to your owner's manual for proper chain slack and procedure
Not Yet Reviewed
$23.99
Motion Pro Clutch Holding Tools
Motion Pro clutch holding tools will take a firm grasp of your clutch hubs, flywheels, gears, sprockets, and more. They are crafted from medium carbon steel with hardened jaws that open up to 5 in. wide. Removal and installation of your clutch hub and basket can be made easier when you use the right tools--Motion Pro clutch holding tools.
Not Yet Reviewed
$48.99
Motion Pro Damper Rod Fork Tools
Motion Pro damper rod fork tools aid in the assembly and disassembly of most inverted forks. They feature hardened steel construction and a durable black finish. Motion Pro damper rod fork tools offer a perfect fit and are an absolute must for complete fork disassemblies.
Not Yet Reviewed
$48.99
Motion Pro FCR Carburetor Tools
Unless you have extremely small hands, you probably don't enjoy trying to adjust Keihin FCR carbs. Motion Pro FCR carburetor tools are ideal for getting into the recessed cavities where most hands with tools can't go. These tool kits feature a 3mm Allen for removing the float bowl, a 6mm hex for the jets, and a long, straight slot for the pilot jets. Additional jets can be held in the cap compartment. Whether you're working on your bike at home or on the trail, Motion Pro FCR carburetor tools are a handy addition to any tool kit.
Not Yet Reviewed
$28.59
Motion Pro Bearing Retainer Tools
Use the correct tool for the job! Motion Pro bearing retainer tools are precision designed to prevent damage to the retainer ring after peened stakes have been removed by drilling. Remove and replace your rear wheel bearing/seal retainer rings with Motion Pro bearing retainer tools.
Not Yet Reviewed
$22.99
—
$35.99
Motion Pro Fork Cap Remover/Bearing Retainer Tools
A must-have device for every KTM owner who prefers to service the bike forks by hand, Motion Pro fork cap remover/bearing retainer tools fit perfectly over the fork cap. Functional and precise, it features a 3/8 in. square and a 22mm hex drive. The tool can also be used to remove and replace the rear wheel bearing, seal retainer ring, and accessory fork caps. Don't settle for makeshift tools; the right equipment from Motion Pro will help you complete the job efficiently.
Not Yet Reviewed
$39.99
Motion Pro Shock Setter Tools
The Motion Pro shock setter tools will allow you to quickly and easily adjust rear shock compression and rebound, no matter where you are! Made from durable stainless steel and anodized 6061-T6 aluminum, these shock setter tools are designed to fit common 17mm high-speed compression adjusters. The portable design of this all-in-one tool allows for convenient trackside or trailside adjustments—which makes it a must-have in your toolbox or tool pouch. All of Motion Pro suspension tools are built with durable high-quality materials and designed to make suspension service quick and efficient.
Not Yet Reviewed
$31.99
Motion Pro 5-in-1 Damper Rod Bleed Tools
Motion Pro designs and manufactures high-quality specialty tools for motorcycles, ATVs, and UTVs. These 5-in-1 damper rod bleed tools allow for effortless retrieval of the damping rod after spring installation. They're perfect for working on Kayaba, Showa and WP inverted forks. The tools' one-piece design means no lost parts. Each rod includes a downward-facing bleed port to prevent oil splatter. Additional details: * Five thread sizes in one tool: M10 x 1.0, M10 x 1.25, M12 x 1.0, M12 x 1.25 and M14-1.0 * Precision billet aluminum construction with durable blue anodized finish and laser engraved markings
Not Yet Reviewed
$34.99
Motion Pro Chain Master Link Press Tools
Motion Pro chain master link press tools will easily press on and off master link plates for clip-style chains. The tools feature a lightweight billet aluminum construction with a durable blue anodized finish and laser engraved markings. They're built with hardened steel pins for reliable use—and they work on all 50 series chains! Additional features of Motion Pro master link tools include: * Original Motion Pro design * Will not damage master links * Not for use in breaking rivet master links
Not Yet Reviewed
$39.99
Motion Pro Sprocket Jammer Tools
Motion Pro Sprocket Jammer tools are must-haves for your bike toolbox. These patent pending pieces prevent rotation of chain and sprockets for easy removal or installation of counter shaft nut. They can be used to pull the rear wheel against chain blocks when tightening the rear axle. The Motion Pro Sprocket Jammer features CNC billet aluminum construction, a blue anodized finish, and laser etching for easy identification.
Not Yet Reviewed
$24.99
Motion Pro V3 Cable Lubers
Motion Pro V3 cable lubers make it easy for you to efficiently lube control cables without the mess. Their unique design features an innovative seal and adjustable plunger to ensure proper lubrication with less lube. These tools work on most control cables with a 4mm to 8mm O.D. housing. Additional details: * Will seal over most free-spinning end fittings * Can be used with compressed air to blow out dust and debris prior to lubing * Easy to use and clean * Patented design
Not Yet Reviewed
$27.49
Motion Pro Quad-Stake Rivet Kits
Motion Pro quad-stake rivet kits will safely and properly peen a soft-nose-type master link pin tip. Specifically designed for use in the 08-0135 Jumbo Chain Tool, they will help you retain that factory quad stake look.
Not Yet Reviewed
$24.75
Motion Pro U-Joint Clip Installers
If you are tired of using oversized automotive U-joint tools to service your UTV/ATV, Motion Pro has the answers. Motion Pro U-joint clip installers easily affix inner circlips on UTV and small vehicle U-joints. Their patented ultra-thin profile features a durable hardened steel V-style blade that works with virtually all UTV U-joints and has an integrated magnet to securely hold clips in place during installation. The blade is fitted with a rugged plastic handle designed with a steel strike plate on the end. Add one to your powersports tool arsenal.
Not Yet Reviewed
$21.99
Motion Pro Fork Cap Sockets
Motion Pro fork cap sockets can easily remove and install your right or left hand fork caps without damaging the polished surfaces. They allow you to properly torque the fork cap assemblies during installation. Do it right the first time with Motion Pro Tools.
Not Yet Reviewed
$34.99
Motion Pro Tappet Adjuster Wrenches
Motion Pro offers tappet adjuster wrenches to fit most motorcycles and ATVs with screw-type tappet adjustments. These aluminum/steel wrenches are designed allow for precise valve lash adjustment without disturbing the setting when the lock nut is fastened. The integrated repositionable wrench handle holds the lock nut, while the drivers are used to loosen or tighten the valve adjustment screw. Knurled knob on adjuster drivers ensure a precise and secure grip. The tappet adjuster wrenches are available for 8mm, 9mm, and 10 mm lock nut sockets, and 3mm square, 4mm square, and straight slot type drivers. Order the wrenches designed for your application needs.
Not Yet Reviewed
$44.99
Motion Pro Showa BPF Fork Cap Sockets
Motion Pro Showa BPF fork cap sockets help you remove and install fork caps on your motorcycle without scratching or damaging the forks. The sockets feature aluminum construction and a durable blue anodized finish. They fit 8-sided 45mm fork caps. Put down the adjustable wrench, and pick up Motion Pro's Showa BPF fork cap sockets.
Not Yet Reviewed
$29.99
Motion Pro Dual Chamber Fork Cap Wrenches
Motion Pro dual chamber fork cap wrenches make loosening and removing the fork cap cartridges from your dual chamber fork seals an easier and less time-consuming project. These are high-quality, durable tools and are just right for the applications noted. Do it right the first time with the right tools for the job from Motion Pro Tools.
Not Yet Reviewed
$26.99
Motion Pro Fork Cap Wrenches
Motion Pro fork cap wrenches make loosening and removing the fork caps an easier and less time-consuming project. These are high-quality, durable tools and are just right for the applications noted. Do it right the first time with Motion Pro Tools.
Not Yet Reviewed
$30.99
—
$35.99
Motion Pro WP Shock Clevis Jam Nut Sockets
Motion Pro WP shock clevis jam nut sockets are specifically engineered for the efficient removal of oval-profile clevis jam nuts found on WP shock absorbers. Sockets have a durable heat-treated alloy steel construction with an open-end design that allows for removal of clevis and service to rebound adjuster without disassembly of the shock. Whether you are a professional mechanic or an avid DIYer, this innovative tool from Motion Pro will help you to keep your motorcycle's suspension in top shape. Key features: * Crafted from heat-treated alloy steel to withstand rigorous use, promising longevity and reliability * Professional black oxide finish not only enhances durability but also provides a sleek appearance * Specialized design is tailored for the removal of clevis jam nuts, ensuring a perfect fit and optimal performance * Open-End configuration allows for easy access to the clevis, enabling adjustment of the rebound without the need to disassemble the shock
Not Yet Reviewed
$29.99
