Availability
Fragola Performance Systems 6000 Series PTFE-lined braided stainless pre-made hoses are manufactured to the highest quality standards for years of trouble-free service. A tough, extruded PTFE inner layer with a smooth bore is fed into a machine that weaves stainless steel wire into the familiar braided pattern. Since stainless steel braided hoses can be abrasive to almost anything they come into contact with, Fragola offers their 6000 Series PTFE-lined stainless hoses with clear or black covers to prevent scratches, scrapes, and scuffs. The properties of PTFE-lined hose make it a natural for highly corrosive applications like automotive brake fluid, hot oil, and power steering fluid; it also handles nitrous oxide with ease. Even under high pressure, it will cycle over and over again without failure. Fragola Performance Systems 6000 Series PTFE-lined hose are available in assorted sizes, lengths, and hose end configurations. Each hose is 100 percent inspected and any flawed sections are discarded. Plus, hose sizes 6-12 AN have a conductive core to dissipate static electricity.
( 143 )
$21.99
—
$49.99
Handle nitrous oxide with ease using Fragola Performance Systems nitrous supply lines. These PTFE-lined hoses are a natural fit for any highly corrosive application, as well as being able to handle high pressure and cycle over and over without out failure. They are covered with braided stainless steel and are assembled with anodized fittings. Choose the length you need, from 8.5 in. to 20 ft., to complete your plumbing project. For high-powered performance, choose the superior quality of Fragola nitrous supply lines.
( 6 )
$20.99
—
$40.99
Fragola Performance Systems PTFE brake hose assemblies are perfect replacements for worn-out rubber brake hoses. These strong, flexible units are constructed with PTFE tubing, reinforced with an outer braid of stainless steel. A clear or black plastic covering is available for most size hoses and adds another layer of protection. The hoses are resistant to heat and most chemicals, and are compatible with all brake fluids. All hoses are pre-assembled and pressure-tested to their rated working pressure. These assemblies are available in all popular configurations of -3 and -4 AN hose ends, including -3 lines. Fragola PTFE brake hose assemblies were an instant success because of their resistance to scratching anything they come into contact with. The black covering is popular with those who want to have the traditional look with the performance of PTFE-lined hoses. Choose the length, hose end angle, and other options needed for your vehicle.
( 51 )
$20.99
—
$49.99
Fragola Performance Systems AN assembled hoses are ideal for when you want to upgrade from those rubber brake lines to a higher pressure line, to improve pedal response as pressure is applied. They come available in a variety of lengths to ensure a good fit and convenient cable routing.
Not Yet Reviewed
$20.99
—
$34.99
Have you ever wished that you had an extra pair of hands when you're going it alone on an assembly project? Well, now you can get a helping hand with these magnetized aluminum vise jaw inserts by Fragola Performance Systems. These vise jaw inserts will fit most vises with 3 in. jaws and are designed to help hold your fittings securely in place during assembly.
( 12 )
$34.99
The best way to manage and renew your power steering system is with Fragola Performance power steering hose ends. These special zinc plated steel fittings are easily assembled and reusable. Fragola offers their power steering hose ends in various AN sizes with straight, 45 degree, or 90 degree angles to provide a proper fit for your specific application. Hose ends may look alike, but they're not, and Fragola Performance knows that engineering counts, even in the small stuff like power steering hose ends. Get the most from your investment with fittings made for the 21st century by Fragola Performance Systems.
( 28 )
$20.99
—
$38.99
Doing any work on your ride is a lot easier and a whole lot more pleasant when you have the right tools for the job. Fragola Performance Systems hose test kits are one of those must-haves for your toolbox. These hose test kits from Fragola allow you to quickly test your -4 through -16 hose assemblies. Simply screw them into AN hose ends, pressurize them with your compressed air source, and submerge them into a water bath to look for bubbles. These aluminum line testers from Fragola are available individually or as complete kits, so you'll be prepared to check for leaks in any size hose.
( 20 )
$24.99
—
$39.99
Your fuel line is the connection to your fueling system and, with the proper connections, should deliver the right amount of fuel at the correct rate to power your performance ride down the strip or around the track. Fragola Performance Systems offers high performance Pro Stock fuel line kits for Demon and Holley carburetors. These premium fuel line kits use strong braided stainless steel crimped P.T.F.E. hose assemblies and aerospace-quality aluminum fittings that are "bright-dipped" for corrosion resistance and lasting appeal. Fragola swaged smooth bore P.T.F.E. hose is reinforced with a tightly woven covering, making it a natural for high-pressure fuel lines. Feed your power racer with American-made Fragola Performance Systems fuel line kits--you'll be glad you did.
( 38 )
$30.99
—
$47.99
Build your own high-pressure line assemblies with Fragola crimp fittings. These crimp fittings are designed for use with Fragola PTFE hose and are available in correct AN sizes to meet your working pressure requirements. Fragola offers numerous variations so you can create what you need, when you need it, with these performance crimp fittings.
( 1 )
$24.99
—
$29.99
Your fuel line is the connection to your fueling system and, with the proper connections, should deliver the right amount of fuel at the correct rate to power your performance ride on the strip or street. Fragola Performance Systems offers high performance fuel line kits for the most popular carburetors. These premium fuel line kits consist of strong braided stainless steel lines and aerospace-quality aluminum fittings that are "bright-dipped" for corrosion resistance and lasting appeal. Fragola fuel line kits arrive completely assembled with a high-flow adapter and a special plugged cap with a provision for a fuel pressure gauge. These fuel line kits are designed with an easy system of detachment, allowing you to make quick jet changes at the track. Feed your power racer with American-made Fragola Performance Systems fuel line kits--you'll be glad you did.
( 31 )
$43.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
