Availability
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 454 )
$20.95
—
$50.95
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$21.95
—
$61.95
Edelbrock offers upper to lower intake manifold gaskets for a variety of port styles, including their Tunnel Ram, Performer, Victor, and Performer RPM manifolds. These replacement seals are made from top-quality materials and designed to original specs, ensuring proper fit and performance. The economical gaskets are available in a variety of configurations; order the model designed for your year/make and engine application.
( 42 )
$22.95
—
$40.95
Edelbrock Pro-Flo EFI replacement intake air temperature sensors are available for their Pro-Flo and Pro-Flo XT EFI systems. When it comes to components to keep your EFI system working smoothly, Edelbrock has you covered.
( 2 )
$40.95
—
$58.95
Getting a bigger charge of the fuel-air mixture into your cylinders is one of the keys to making more horsepower. Edelbrock intake valves can help make that happen. They're engineered and carefully shaped to boost gas flow. They're made from rugged stainless-steel alloy, have hardened stem tips, and are swirl polished.
( 2 )
$35.95
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
( 42 )
$22.95
—
$43.95
These Edelbrock choke block-off plates are designed to seal off the choke tower on the intake manifold. They are made of aluminum and include a gasket and the necessary mounting hardware.
( 33 )
$27.95
—
$37.95
These Edelbrock valley cover plates are designed for use on engines with Edelbrock heads. They keep the engine oil in the tappet chamber where it belongs, away from the intake manifold.
( 4 )
$60.95
Edelbrock EGR gaskets are designed to fit aftermarket Edelbrock aluminum intake manifolds. They fit the 3721, 3723, 3781, and 3783 Performer and Performer RPM intake manifolds.
( 3 )
$20.95
—
$30.95
If you're rebuilding your cylinder heads, Edelbrock replacement valve seats will help you complete your job. Valve seats are critical components in the life and performance of your valves. Edelbrock valve seats are crafted from strong ductile iron for exhaust and intake locations. When you need to service your heads, choose these Edelbrock replacement valve seats.
( 3 )
$23.95
—
$26.95
Don't cut corners when it's time for valves. Get genuine Edelbrock stainless steel valves. They're made from a tough, stainless steel alloy and are carefully designed to increase gas flow for more power. What's more, they have hardened stem tips for durability and are swirl-polished.
( 24 )
$31.95
—
$51.95
Durable and heavy-duty Edelbrock valve guides are made of manganese-bronze material for the ultimate in wear. They are designed to fit Edelbrock cylinder heads.
( 4 )
$24.95
These carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.
( 206 )
$26.95
—
$62.95
Edelbrock has a variety of pipe plugs to fill your application. Be it your nitrous system or intake manifold, they offer different sizes, quantities, and finishes to close the unused holes.
( 46 )
$28.95
—
$29.95
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
( 359 )
$44.95
—
$60.95
Edelbrock carburetor gasket kits are made to signify the high standards and performance that Edelbrock is known for. Edelbrock gasket kits seal intakes, heads, carb-to-manifolds, and other components. You can trust the quality of Edelbrock carburetor gasket kits to protect your engine.
( 26 )
$20.95
Edelbrock high-temp silicon sealant is the right stuff for your intake manifold install. This high-quality RTV silicone is oil-resistant, fast-curing, sensor-safe, and non-corrosive. The sealant is low-odor and meets the performance specifications of OE silicone gaskets. Plus, it will retain high flexibility to prevent the leaks and seepage caused by vibration and thermal expansion. When you're ready to install exhaust components, be equipped for the job with Edelbrock high-temp silicon sealant.
( 18 )
$23.95
Edelbrock low-profile vacuum fitting reducers facilitate the easy installation of your double pump Holley carburetor. Their low-profile design will clear your double pumper's fuel bowl when used with Edelbrock's Performer and Torker II small block Chevy intakes.
( 27 )
$24.95
Edelbrock thermostat gaskets are made to Edelbrock's high standards of quality and performance. They're the same high-quality replacement gaskets that they supply with Edelbrock intakes, heads, carburetors, and other components.
( 5 )
$20.95
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle bracket is mounted to the intake.
( 21 )
$24.95
—
$31.95
Edelbrock A&B epoxy is a two-part bonding product that you can mold like putty, yet it hardens in one hour (at 75 degrees F) to a steel-like consistency. The heavy-duty filler blend won't shrink and is not affected by solvents, oils, or gasoline. This epoxy can withstand temperatures up to 250 degrees F, which makes it perfect for repairing intake manifolds, cylinder head intake ports, heads, blocks—and plenty of other projects. Edelbrock A&B epoxy is water- and gasoline-proof, adheres to nearly any clean surface, and can be drilled and tapped after it cures.
( 1 )
$50.95
Edelbrock LS3 1-Bar MAP sensors are designed to fit Chevrolet LS3 applications that use an Edelbrock LS3 XT intake manifold or any other factory-style intake that has a 12mm MAP sensor port hole. These MAP sensors should also replace the 1-bar MAP sensor on factory LS3 applications when an Edelbrock Pro-Flo 4 EFI system has been installed in order to provide a compatible calibration during installation and tuning.
Not Yet Reviewed
$55.95
Are you having problems with your new intake accepting your throttle body? Edelbrock throttle body adapters allow you to use either your stock or aftermarket throttle body on Edelbrock intake manifolds.
( 1 )
$31.95
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They're made of cast aluminum and come complete with gaskets and bolts.
( 7 )
$35.95
—
$47.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
