Availability
DEI Heat Shroud sleeving solves the problem of heat and abrasions causing failure of lines, hoses, and wires without the need to disconnect them. Offered in two different materials, both provide high-temperature protection and the added convenience of a hook-and-loop closure design that eliminates the need of removing one end of connected wires, cables, or hoses to install. Heat Shroud with glass fiber fabric and aluminized outer facing has the versatility of fitting diameters from 0.5 in. to 2.5 in. diameter, is easy to trim to length, and reflects 90 percent of radiant heat. For more demanding applications there is DEI Heat Shroud GOLD featuring metalized polyimide lamination, bonded to a robust 20 oz. heat-treated glass fiber base (rated to 1,100 degrees F) material. It is able to reflect radiant heat up to 800 degrees F and will fit diameters from 0.5 in. to 1.25 in.
( 72 )
$31.99
DEI Fire Sleeve and tape kits include their popular thermal insulator sleeving, along with a 16 in. length of Fire Tape. Fire Sleeve is constructed from a high-temperature resistant braided glass material heavily coated with 100 percent iron oxide silicone rubber. They provide the ultimate in heat insulation and protection from direct heat up to 500 degrees F. DEI kits are available with different diameters and lengths of Fire Sleeve. The Fire Tape will finish off sleeve ends when joining together creating a clean professional look. More features: * Insulates wiring, hoses, oil/brakes/transmission lines * Use for bundling and protecting hoses, electrical wiring, etc. * Withstands 2000 degrees F of intermittent heat
( 38 )
$25.99
—
$35.99
DEI Fire Tape is a non-adhesive silicone rubber tape that is self-bonding, self-curing, and forms a permanent watertight barrier. It's ideal for use with DEI Fire Sleeves and serves as an excellent insulating alternative for vinyl tapes and wraps. Other uses include wrapping wiring harnesses, along with covering and protecting wire splices and electrical wire terminations. It withstands 500 degrees of direct continuous heat, does not harden, remains flexible, and is self-bonding and self-curing.
( 5 )
$37.99
DEI Heat Sheath sleeves are made from high-temperature fiberglass fabric bonded to aluminized material and then sewn into a tube. Designed to slide over wires and hoses, these sheaths can be easily shaped to fit the tightest bends. They will reflect up to 90 percent of the radiant heat and can insulate against up to 500 degrees of direct, continuous heat. They can be easily cut to length with scissors or a sharp knife and come in five popular diameters from 3/4 in. to 1 1/4 in., in 3 ft. lengths. They are also available in bulk, up to 50 ft. rolls.
( 90 )
$21.99
—
$32.99
DEI radiant matting heat screens feature double sided aluminized radiant construction that provides superior heat protection. One side protects from direct heat sources up to 1,000 degrees F, while the reverse aluminized side protects against radiant heat sources up to 2,000 degrees F. Heat screens can be used to protect the driver's compartment from excess heat; to protect areas where excessive heat can blister paint; where exhaust pipes run close to the fuel tank; and many other applications too numerous to mention. This material can be applied with a high temperature adhesive, or fastened down with screws or rivets.
( 9 )
$53.99
DEI Heat Sheath GOLD sleeves will protect and keep components cool in the most demanding applications. They are manufactured from high-temperature metalized polyimide lamination, bonded to a robust 20 oz. heat-treated glass fiber base material. DEI GOLD is able to reflect radiant heat up to 800 degrees F making the sleeves perfect to keep critical lines, air intakes, and hoses cool and protected. The base glass is rated up to 1,100 degrees F.
( 6 )
$28.99
DEI Vapor Block fuel line sleeves provide an easy, sensible, and low-cost solution to rough idling and difficult starting caused by vapor lock. Designed to greatly reduce heat in the line--keeping the fuel cooler and below boiling--the protective sleeves install hassle-free with a split design and adhesive flap; there's no need to disconnect the fuel line to install them! Simply wrap Vapor Block around the fuel line, remove the adhesive release liner, and press the adhesive-backed flap into place. Features and benefits include: * Made of glass fiber and polyester laminated to an aluminum outer layer * Offers excellent inexpensive, long-lasting thermal protection with no modifications needed * Available in different diameters
( 23 )
$22.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
