Free Shipping on Orders Over $125 at Summit Racing

Weld Racing V-Series Black Anodized Wheels

Get back on track with Weld Racing Pro Drag V-Series wheels. They offer cutting-edge design with forged aluminum construction to deliver a lighter, more durable wheel with a unique hole pattern and black beadlock rings. The Weld V-Series wheels balance the weight and strength--less weight, more strength--what you want and need to go the quarter mile. And what does the "V" stand for? Why, victory, of course! Take a bold departure from the starting line with a set of Weld Racing V-Series polished wheels.

5.0 out of 5 stars ( 14 )

$1,819.00

Weld Racing RT-S S71 Forged Aluminum Black Beadlock Wheels for Mickey Thompson Tires

Weld Racing RT-S S71 forged aluminum black beadlock wheels feature budget friendly 3-piece forgings that are assembled by welding, for application flexibility. These wheels feature a beadlock ring designed for use with Mickey Thompson tires using a smaller bead. Manufactured using primary forging-grade aluminum alloys to create maximum strength and durability, these wheels feature the classic Weld Racing look and continue their tradition of utilizing a forged billet center and cold-forged rims. These unique wheels offer three mounting pad heights to clear specific drum and multi-piston opposed calipers. Weld Racing's RT-S S71 wheels are available in a range of sizes and are tested using Finite Element Analysis (FEA) and in-house destructive testing to ensure safety.

4.0 out of 5 stars ( 4 )

$1,659.00

Clearance

Weld Racing Magnum Drag 2.0 Black Anodized Wheels

Weld Racing's Magnum Drag 2.0 black anodized wheels feature a lighter, stronger, forged aluminum center and cold-drawn rim shell halves. These wheels have an outer polished lip. Weld Racing Magnum Drag 2.0 black anodized wheels' double-rolled outer rim lips make for stronger, straighter, and better screw retention. They are available in standard and double-beadlock designs, so whether you're racing Super Gas or Top Fuel, Weld has you covered.

4.5 out of 5 stars ( 10 )

$2,185.00

$1,755.50

Clearance

Weld Racing AlumaStar 2.0 Polished Wheels

The choice of many racers, Weld Racing AlumaStar 2.0 polished wheels are a 2-piece design with a 5-spoke forged center. Weld bolts them to cold-forged aluminum rim halves with 5/16 in. Grade 8 bolts. Weld AlumaStar 2.0 wheels are NHRA-accepted in all classes and are over twice as strong as SFI 15.1 race wheel specs require them to be.

5.0 out of 5 stars ( 4 )

$2,249.00

$1,610.50

Weld Racing AlumaStar 2.0 Black Anodized Wheels

Weld Racing AlumaStar 2.0 is the wheel that professional drag racers use most. These black wheels are a 2-piece design with a 5-spoke forged center. Weld bolts these to cold-forged aluminum rim halves with 5/16 in. Grade 8 bolts. AlumaStar 2.0 wheels are NHRA-accepted in all classes and are over twice as strong as SFI 15.1 race wheel specs require them to be.

4.6 out of 5 stars ( 5 )

$1,819.00

—

$1,939.00

Weld Racing RT-S S80 Forged Aluminum Black Beadlock Wheels for Mickey Thompson Tires

Weld Racing RT-S S80 forged aluminum black beadlock wheels are 3-piece forged wheels, offering a lightweight performance solution for American Muscle and other high performance cars with street and strip usage. These Weld Racing RT-S S80 forged aluminum black beadlock wheels use a smaller beadlock designed for use with Mickey Thompson tires. The RT-S S80 wheels feature a polished shell with black machined center and 10 arching spokes with machined edges. The center cap and valve stem is included, as well as 12-point coated beadlock hardware. The RT-S S80 wheels come in a variety of sizes and bolt patterns and are available with a beadlock ring option of either black anodized or polished forged aluminum.

Not Yet Reviewed

$1,769.00

Weld Racing Full Throttle Frontrunner Polished Wheels

Weld Racing Full Throttle frontrunner polished wheels are forged 6061 monoblock aluminum 1-piece construction drag racing wheels that offer a modern take on the classic Torq Thrust style. The wheels sleek design is optimized for drag racing performance and a high-polished finish provides a high-quality, show-ready look. Designed for superior strength and weight reduction, the Full Throttle frontrunner wheels are specifically engineered to improve acceleration, braking, and handling on the track. They are offered with options for spindle or lug mount configurations and are available in 15 in. x 3.5 in. sizes, with 17 in. and 18 in. options for specific applications.

Not Yet Reviewed

$1,575.00

Weld Racing RT-S S77 Forged Aluminum Gloss Black Single Beadlock Wheels

Weld Racing's RT-S line of wheels offers maximum weight savings and performance through their advanced forged construction. Designed for serious racers, these wheels combine lightweight strength with durability, ensuring high performance on the drag strip and reliability on the road. RT-S wheels are built to handle the demands of extreme racing conditions. Weld's S77 gloss black beadlock wheels have a classic tuning fork design modified for modern muscle. 3-piece forged construction using forged shells and 6061 centers allow for necessary strength with reduced weight for optimal street performance. Designed to fit modern muscle cars, the S77 wheels fit most muscle car applications including Mustangs, Camaros, Corvettes, and Challengers. Weld Racing RT-S S77 wheels are standouts with polished shells and black machined centers topped with black anodized aluminum beadlock rings. The S77 beadlock features a forged single outer-beadlock with knurling and 12-point Grade 8 hardware. Weld's beadlock technology adapted for the street gives your car or SUV true street and strip performance. Center cap and valve stem are included. Select the ideal fit for your vehicle.

Not Yet Reviewed

$1,659.00

Spidertrax Off-Road Spider 9 Chromoly Axle Housings

Spidertrax Off-Road's Spider 9 chromoly axle housings deliver a level of quality and performance that surpasses the industry's highest standards. Building on the platform of their previous award-winning Spider 9 housing, these chromoly housings are stronger, with heat-treated tubes and internal shell gussets. They accept 9 in. and 10 in. gears, are more versatile with 68 in. OAL, and work with standard and mid-engine setups. Each unit is TIG-welded on the outside and has a machined face. The housings are available for 3.5 in. or 4 in. axle tube diameter.

Not Yet Reviewed

$1,999.00

ADS Race Bypass Shocks

ADS external race bypass shock options are designed around racing first and foremost. Performance, reliability, and longevity are primary concerns when determining flow rates and zone placement. Multiple zones allow end users to dial in the damping curve to driver and chassis type. Enhanced flow in critical areas reduces heat buildup and harshness; these reductions in restriction amplify traction potential and driver control. Large capacity reservoirs aid in cooling as well as reducing pressure gain in the system. Large diameter shafts increase strength for extreme applications and stand up to the abuse of racing time and time again. All these features together deliver a bulletproof bypass shock that is guaranteed to perform on your race car or weekend warrior. Options include: * 3, 4, or 5 tubes * Style 1 or 2 * Remote or piggyback reservoir * Dozens of extended/collapsed length options * 8 in. to 18 in. stroke options

Not Yet Reviewed

$1,599.95

—

$1,999.95

QA1 Pro Rear Parallel 4-Link Systems

QA1's Pro Rear Parallel 4-Link systems with panhard bar kits simplify the fabrication process for vehicles that lack aftermarket suspension support—and offer an easy solution that provides ride height adjustability and a simple installation process. These DIY kits produce professional-quality results and great looks in a convenient package. Designed for the DIY enthusiast, each kit contains high-quality, MIG-weldable components that ensure a safe and well-engineered design that'll give your favorite truck or hot rod the stance and ride quality it deserves. The systems are available in three models: * Basic, with no shocks or springs * Single-adjustable, with coilover shocks (150 lb. spring rate) * Double-adjustable, with coilover shocks (150 lb. spring rate) ADAPTABILITY: Kits include all necessary components and hardware for assembling and mounting the trailing arms, shock mounts, and panhard bar. The raw components can be cut to length and welded as needed, allowing for seamless adaptation to a wide range of applications. PACKAGING and SIMPLICITY: The parallel 4-link system, by design, packages easily into many applications, making it an ideal solution where space is limited. The parallel 4-link system is easy to tune, making it a great choice for DIY mechanics while still meeting the demands of high-end builds. Powdercoated trailing arms with forged bushing ends offer great looks, durability, and offer a smooth, compliant ride. TUNABILITY and RIDE HEIGHT ADJUSTMENT: Adjustable coilover brackets provide ride height adjustment so you can tune in the perfect stance for your ride. The included panhard bar and adjustable trailing arms ensure you can fine-tune your axle position and pinion angle for proper function and control. KIT CONTENTS: -- Powdercoated trailing arms with forged bushings and provide adjustment from 24 5/8 in. to 25 1/2 in. in length -- Trailing arm axle brackets for 3 in. axle tubes -- Panhard bar max length 37 in. -- 40 in. trailing arm crossmember -- 40 in. shock crossmember and mounting tabs -- All required hardware -- NOTE: Single- or double-adjustable models also include coilover shocks

Not Yet Reviewed

$1,770.95

—

$1,980.95

QA1 HD Pro Rear Drag 4-Link Systems

QA1 HD Pro rear drag 4-link kits are built to put down serious power! Streamlining the fabrication process, these systems deliver professional-grade results and performance in a convenient, easy-to-order kit. They are designed for the hardcore, discerning, do-it-yourself racer looking for a no-compromise solution to take their vehicle to the next level in performance and adjustability. Offered with or without QA1's MOD Series 4-way adjustable coilover shocks, or 7 in. travel, track-proven single or double adjustable coilover shocks, each kit contains high-quality, MIG-weldable components to ensure a safe and properly engineered design that can be easily adapted into many drag racing setups. A components kit is also offered without coilover shocks and lateral locating device. Find convenience, safety, and performance all in a QA1 HD Pro rear drag 4-link system. Select the kit best suited to your drag race suspension setup. Features, benefits, and contents: * Drag race-style 4-link design: -- Performance and adjustability -- Wide range of instant center tuning and on-car adjustability -- Components can be cut to length -- 40 in. or narrower frame rails * 1/4 in. thick plates * 1 1/4 in. diameter, 22 in. length trailing arm tubes * Grade 8 hardware * QA1 chromoly rod ends * 40 in. shock crossmember and mounting tabs * 40 in. diagonal link kit with mounting brackets (not in components kit)

Not Yet Reviewed

$1,538.95

Johnson's Hot Rod Shop Rear Ladder Bars

Vintage-styled, yet modern, Johnson's Hot Rod Shop rear ladder bars evolve the age-old design of rear radius rods to perfection. Their ladder bars firmly locate the rear-end housing of your hot rod while achieving a smoother ride and better traction under hard acceleration. The bars have been engineered for use on either a transverse Model A buggy spring, or a coilover rear suspension. Johnson's ladder bars are manufactured from T6061 aluminum with a machined or show-quality polished finish. They measure 42.75 in. center-to-center and are sold as a pair complete with hardware, weld-on rear end housing brackets, and a weld-on ladder bar crossmember for center K-members. A variety of distinctive styles are available, along with matching front radius rods (sold separately). Johnson's rear ladder bars deliver superior strength and clean lines for your hot rod.

Not Yet Reviewed

$1,528.00

—

$1,795.00

Ridetech Bolt-on 4-link Systems

Ridetech Bolt-on 4-link systems provide a lowered ride height with smooth handling. They include the link bars with rubber bushings, powdercoated brackets, and optional front upper or lower controls arms, depending on the vehicle application. The suspension systems require no welding or cutting, making installation easy. Order the kit designed for fitment on your year/make/model.

4.75 out of 5 stars ( 8 )

$1,625.00

—

$1,995.00

On Sale

Holley EFI 8-Channel CAN EGT Kits

Introducing the Holley EFI 8-Channel CANBus EGT kits, for Holley EFI! Exhaus/Gas/Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to as identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The EGT probes come in different lengths ensuring a clean looking installation. The included stainless steel bungs feature a built-in step, making installation as easy as possible! Kit features: * Compatible with HP or Dominator EFI, and Terminator X EFI * Plug-and-Play 8-Channel CAN EGT module, for quick and easy installation * High-quality 1/4 in. stepped stainless steel EGT weld bungs * Robust 1/4 in. EGT probes, designed to withstand the extreme cylinder pressures * 4 ft. CAN extension harness * Analog output wires, to be used with non-Holley EFI installations * Requires V5 build 100 or newer software/firmware

5.0 out of 5 stars ( 1 )

$1,749.95

$1,573.95

Borla S-Type Axle-Back Exhaust Systems

Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.

4.7 out of 5 stars ( 243 )

$1,599.99

—

$1,999.99

Borla S-Type II Axle-Back Exhaust Systems

Borla S-Type II axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type II axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies often associated with resonance or drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type II axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type II axle-back exhaust systems.

4.54 out of 5 stars ( 26 )

$1,899.99

On Sale

Holley Sniper EFI Quadrajet Self-Tuning Fuel Injection Systems

Holley Sniper EFI Quadrajet self-tuning fuel injection systems are ideal replacements when you're tired of rebuilding the 50-plus-year-old Rochester Quadrajet (Q-jet) on your classic ride. They're the first bolt-on, spread-bore, EFI throttle-body systems not requiring any additional adapters, sealing plates, or intake manifold swaps. They retain the same great features as the 4150 Sniper EFI version (four 100 lbs.-hr. injectors; built-in timing control; high resolution 3.5 in. full color touchscreen; etc.). Their throttle body will support naturally aspirated power up to 500 hp. In addition, they offer multiple fuel inlet configurations that allow for a stock-appearing installation and fit most stock air cleaners. Modernize your Q-jet-powered classic vehicle with a Holley Sniper EFI Quadrajet self-tuning fuel injection system. They are offered individually or in Master kits with external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank. Features, items, and specs: * Designed to deliver the signature "Rochester Roar" at wide-open throttle! * Throttle body-mounted ECU–no extra boxes to mount * Only 4 wiring connections required (battery positive and negative, switched ignition, and rpm) * Transmission provisions on throttle lever for TH350/TH400 and 200R4/700R4 * Universal throttle and transmission kick-down bracket * Brake booster adapter (if required) * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required) * Internal fuel pressure regulator preset to 58.5 psi * 20 ft. of 3/8 in. Vapor Guard fuel hose * Fuel pump and filters * Necessary hardware and bulkhead fitting to return fuel to the tank * Genuine Bosch LSU 4.9 wide-band oxygen sensor provides real-time fuel map learning * OEM-style throttle position sensor (TPS) and idle air control (IAC) for years of dependable service * Clamp-on oxygen sensor kit ensures leak-free oxygen sensor installation with stainless steel T-bolt clamps and weld-ready oxygen sensor flange * United States Coast Guard approved (certified to ISO 8846, SAE J1171 requirements) * Available in three finishes--Classic Gold, Shiny, and Black Ceramic

3.0 out of 5 stars ( 7 )

$1,699.95

—

$1,999.95

$1,528.95

—

$1,798.95

Hooker Blackheart Exhaust Systems

At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only

4.44 out of 5 stars ( 48 )

$1,549.95

Currie 9 in. Rear-End Housing Assemblies

Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.

5.0 out of 5 stars ( 7 )

$1,550.00

—

$1,750.00

Borla ATAK Axle-Back Exhaust Systems

Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.

4.61 out of 5 stars ( 157 )

$1,699.99

—

$1,999.99

Corsa Sport Exhaust Systems

Corsa Sport exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. The robust, aggressive-sounding Corsa Sport exhaust systems are manufactured from premium stainless steel, with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right every time, Corsa exhausts go on fast--no cutting or welding is necessary.

4.8 out of 5 stars ( 290 )

$1,524.99

—

$1,959.99

Corsa Xtreme Exhaust Systems

Thanks to their unique, unmatched muffler technology, the drone busters at Corsa Performance have created the ideal exhaust systems for you. Corsa Xtreme exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. Corsa Xtreme exhaust systems are manufactured from premium stainless steel with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right, Corsa exhausts go on fast with no cutting or welding.

4.78 out of 5 stars ( 132 )

$1,599.99

—

$1,837.99

Borla Touring Axle-Back Exhaust Systems

Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.

4.78 out of 5 stars ( 27 )

$1,699.99

160 Results Found For "weld"