Availability
Showing In Stock Items. Show All 415 Items.
Computech custom 8-cylinder thermocouple kits come with your choice of either weld-in or clamp-on EGT probes. The EGT probes are 3/16 in. and can stand up to the most extreme temperatures. Your custom 8-cylinder thermocouple kits are available in either the Chevy (1, 3, 5, 7) and (2, 4, 6, 8) configuration or Ford (1, 2, 3, 4) and (5, 6, 7, 8) configuration. Each EGT probe has a custom-length lead, allowing the probes to plug in cleanly to the EGT modules. These Computech custom 8-cylinder thermocouple kits allow for the removal of the headers without having to take out the thermocouple sensors or un-wire.
Not Yet Reviewed
$1,599.95
On Sale
Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)
Not Yet Reviewed
$1,599.95
Get ready to "Push the Boundaries" with HP Tuners CORE standalone engine control units! Created and designed for gearheads and craftsmen who need the utmost level of customization, CORE ECUs deliver superior control over your powerplant with many features that go beyond the constraints of factory ECUs. They provide all the necessary sensor interfaces, ignition drivers, injection drivers, and output drive stages required for total engine control. Bringing the CORE ECU to life is HP Tuners' VCM Live software, combining the diagnostics and calibration elements into a single, user-friendly interface. HP Tuners CORE ECUs are designed for all levels of LS swaps and high-performance motorsports builds. Currently CORE supports Gen 3 and Gen 4 LS engines with a 24x crank and 1x cam trigger along with 58x crank and 4x cam triggers. Drag, circuit, off-road racing; drifting, rally, or restomods, no matter what your high performance application, HP Tuners CORE ECU will provide everything you need for total control, performance, and ease of use. Order yours today. Key features: * Up to 16 injector control (fuel) and 8 coil packs (spark) * Sequential injection * Flex Fuel support * Dual throttle body capability * Two built-in Lambda controllers * Internal datalogging--up to 150 channels at 1kHz * 3 CAN bus networks (2 CAN and 1 HPT net) and ethernet connectivity * Turbo boost and anti-lag control * Single-stage On/Off and progressive nitrous control * Launch control * Map switching * A/C control, alternator control, etc.
Not Yet Reviewed
$1,999.99
BD Diesel remanufactured turbo head units use the latest in aerodynamic technology and materials that feature lightweight, extended-tip compressor wheels with high-flow blade design characteristics for improved throttle response time. They offer cooler exhaust temperatures, improved engine brake retarding power, and the most rugged bearing system in the turbo industry. They feature a new look with natural finished cast aluminum that meets the highest of standards. If you're looking for a remanufactured turbo head unit that will give you consistent, dependable performance, BD Diesel remanufactured turbo head units won't let you down.
Not Yet Reviewed
$1,539.95
—
$1,950.00
AEM Electronics now offers EV vehicle control units (VCUs) that are the missing link for high-performance EV street-conversion and motorsports applications. These programmable electric vehicle control units allow the calibrator to create customized torque management strategies applicable to a wide range of EV systems and component combinations. The EV vehicle control units are designed to integrate EV systems and unify the tuning experience providing motorsports- and conversion-ready features presented in a high feature, modern and customizable interface. Choose the EV vehicle control unit that's best suited for your application needs. Key features: * Units are built on OEM hardware and features OEM quality strategies—combined, these provide the highest level of reliability, and more importantly, safety for both the programmer and end-user * Full integration of all EV sub-systems under one controller * Input characterization including accelerator pedal, brake switch, PRND switches, and other driver/vehicle inputs * Redundancy and arbitration features for all safety-critical inputs * Startup and shutdown sequencing of high-voltage components, including independent contactor control for each inverter system * CAN message translation for BMS, inverter, PDUs and other CAN accessories * Motor Torque management dependent on vehicle operating states and other driver selectable modes * Closed-Loop motor speed regulation for indirect drive transmission applications * Dynamic real time calculated pack current and vehicle torque limits that maximize safety and optimize performance * Accessory control of cooling pumps, cooling fans, lights and more * Diagnostics and fault detection including CAN message timeouts, thermal limits, contactor, and inverter enable cross-checks
Not Yet Reviewed
$1,549.95
On Sale
Dinan Power Control Units deliver more power and more features with improved reliability and drivability than ever offered before, proving performance without sacrifice is alive and well! Dinan Power Control Units (PCUs) are in-line tuning modules based off over a decade of lessons learned in the category. At their core, the plug-and-play control units install between select sensors and the ECU, adjusting these signals to achieve increased performance that the stock programming is unable to approach. What sets them apart is their integration into more than just the fundamental boost sensors, but also additional connections--inclusive of OBDII, resulting in a more capable system that does more than just increase power. Dinan PCUs are controlled by a free Bluetooth app, available for both iOS and Android, and is home to all the potent features the device offers. Equipped with five different pre-set performance levels, you can use your smart phone and PCU app to change performance levels on the fly, revert to stock, set boost by gear, as well as monitor vehicle health via logging, customizable gauges, and code reading/clearing, ensuring a seamless tuning experience that even a novice can be comfortable with. Lastly, safety and reliability have been cornerstones of the Dinan brand for generations and not only does the Dinan PCU not hinder any factory safeguards or emissions controls but incorporates its own safety features as well. Going one step beyond our own internal protections, the PCUs also grant the end user the ability to monitor up to 20 different engine parameters in real time via customizable in-app gauges for verification of worry-free operation. Those same parameters can also be logged/viewed in app (or exported to CSV) for further scrutiny if desired. Dinan Power Control Units are available with a 2-year unlimited mileage product warranty or a 4-year/50k factory matching new car warranty. Select the Dinan PCU with the preferred warranty.
Not Yet Reviewed
$2,199.95
$1,978.95
Attention sportsman drag racers: Racepak IQ3D digital dash instruments offer a compact, all-in-one solution for data acquisition. Adding a robust, built-in data logger to the popular IQ3, the drag race versions display information on four user-definable pages—and recorded data is stored on a microSD memory card located on the face of the dash for easy access. You can record engine rpm, driveshaft rpm, oil pressure, water temperature, and battery voltage. Smarter racing; get onboard performance that could change the way you compete ... and win, with Racepak IQ3D. Racepak IQ3D drag racing digital dashes specifications include: * Programmable LED shift lights * User-defined 5-character sensor input names * Four programmable external warnings * Shielded, low-luster display for open cockpit use * Can add up to six additional V-Net channels
( 1 )
$1,799.95
Memphis Audio offers direct-fit OEM audio systems for a variety of applications—including many Harley-Davidson© street bikes; and Polaris and Can-Am late-model utility vehicles. The systems are available in numerous configurations to replicate the factory models.
Not Yet Reviewed
$1,549.95
—
$1,849.95
On Sale
Dinan Big Turbos are the ultimate upgrades for racing enthusiasts to fully maximize the power output of your engine. The compressor wheel inside the turbocharger is increased in size enabling additional boost pressures, and thus increased horsepower at higher engine speeds--all while retaining efficiency. These are with an upgraded thrust system to ensure reliable and prolonged life. They are available as brand new units with a new stock turbine custom cast and manufactured, or as rebuilt factory units machined to Dinan specifications. Both come with an upgraded thrust system to ensure reliable, prolonged life. Dinan Big Turbos feature: * Larger billet compressor/impeller wheel that allows 30 percent greater flow over stock which then enables additional boost to be realized while retaining efficiency. * Dinan Installation instructions detail a procedure which is quicker than BMW's turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only). * Includes O-rings and gaskets needed for complete installation on a RWD vehicle only.
Not Yet Reviewed
$1,799.95
$1,618.95
Dee Zee combo transfer tanks offer room for liquid, room for gear—and plenty of extra room in your truck bed! These units combine a handy utility chest, together with a liquid transfer tank, so they take up less of your much-needed truck bed space. The tanks feature a radius curve design that eliminates key weld pressure points; they include a cap, a coupler for venting, and three stability baffles to prevent sloshing and dangerous weight transfer. Dee Zee utility chests have lockable stainless steel paddle handles. Combos are available in Brite-Tread aluminum, with or without an UltraBlack powdercoat finish; or in heavy-duty steel with a textured white or black powdercoat finish designed for corrosion protection. Choose the size and tank capacity tailored for your make/model—then conserve space while transporting everything you need with Dee Zee combo transfer tanks.
Not Yet Reviewed
$1,569.99
—
$1,936.99
Here's a perfect power match for stock or modified engines--BD Diesel Turbo Thruster II turbochargers. Designed as direct, bolt-in replacements for your stock turbo, they offer superior pressure ratios, cooler EGTs, and increased airflow with no compressor surging. The compressor housing design and back plate casting will improve turbo spool-up time and allow for full housing rotation for an easier installation. The rotating assembly uses journal bearings and a new 360 degree bronze thrust washer for extended bearing life and makes future service a lot easier. Give your rig more power with BD Diesel Turbo Thruster II turbochargers.
Not Yet Reviewed
$1,921.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 24 )
$1,749.95
—
$1,899.95
$1,573.95
—
$1,708.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 17 )
$1,749.95
—
$1,999.95
$1,573.95
—
$1,798.95
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 62 )
$1,849.99
—
$1,921.99
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 57 )
$2,085.95
—
$2,182.95
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$1,949.95
—
$2,149.95
$1,753.95
—
$1,933.95
On Sale
Upgrade to Holley EFI Standalone Digital Pro Dash kits and get the facts on your engine! They offer two versions--both are full of features that support most any users, install almost anywhere, and just like traditional gauges install in almost anything. Holley's 6.86 in version actually measures 3.5 in. tall x 7.6 in. wide, is easily mounted in a console/dashboard, off a roll cage, or on a steering column, and includes a 10 LED shift light. The larger 12.3 in. version is for hard-core enthusiasts who want the ultimate display device, and measures 11.5 in. wide x 4.25 in. tall. Holley EFI Standalone Pro Dash units feature: * Standalone digital dashes--no ECU or fuel injection required * High resolution, state-of-the-art, multi-gauge touch screen display with fully configurable layouts: -- Full color, capacitive touch screen with auto dimming for crystal clear data--day or night -- Quickly swipe between multiple active screens (tune, warm-up, race, drive, etc.) -- Virtual switch panel eliminates the need for external toggle switches -- 16 default background skins pre-loaded with unlimited options for importing custom layouts -- Built-in GPS with speed, odometer and trip odometer function (external antenna included) -- Rendered analog (dials/needles) and digital gauge styles available -- Integrated datalogger -- Rugged, water-resistant case constructed of cast aluminum for long life and durability * Plug-and-play features are pre-configured in the harness and include dash layouts/screens for: -- Oil and fuel pressure, coolant and air temperature (utilizes plug-and-play Holley sensors, not included) -- Turn signals, high beam, fuel level, engine vacuum/boost * Additional input and output functionality: -- 13 multi-configurable inputs -- 4 ground switched outputs -- 4 speed channels (two dedicated) for rpm, driveshaft speed, or any other Hall effect speed input -- User definable channel alarms and warnings * Communications/harness: -- 4-pin wiring harness contains power, ground, and CANbus connections -- Holley EFI CANbus connection for expanded capability with Holley EFI systems -- Expandable storage via USB * Integrated datalogger: -- Internal log memory of 1GB (expandable up to 32GB with addition of micro-SD card) -- External logging to USB flash drive is also available for easy file management -- On-screen datalog playback allows you to review vital run information right on the dash -- Full analysis via laptop is available. Simply download the file to a USB drive and view with the free datalog viewer at Holley.com * Flexible mounting options: Surface or flush mounting—high-quality hardware included * Simple setup and programming: USB keyboard and mouse functionality * Fully upgradeable * Both dash versions include harness/cables, mounting hardware, USB memory stick, and CAN terminator * GPS antenna * Sensors not included
( 3 )
$2,249.95
$2,023.95
On Sale
Aeromotive 5.0 gpm brushless variable speed gear pumps are engineered from the ground up for winning performance. These efficient pumps utilize a spur gear design, paired with a brushless motor, to deliver 5.0 gpm at 60 psi. Their inline flow-through design features contoured port machining and no shaft seals, while offering low amp draw, excellent heat dissipation, and high-pressure capabilities. The units are True Variable Speed (TVS) controlled, offering the advantage of pump speed control via a 0-5 V analog DC input signal. The Pro-Series TVS controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low demand, decreasing an already low current draw, and, therefore, minimizing the introduction of heat even further. Lots of power needs lots of fuel; Aeromotive 5.0 gpm TVS brushless gear pumps will feed your hungry high performance machine. Order the body style preferred for your application.
( 4 )
$1,884.85
$1,696.36
EPAS Performance electric power steering kits provide modern power steering for your classic car. These performance systems are available to outfit a wide range of vintage and classic vehicles from 1920-1980. An easy step-by-step installation manual is available online for each of the kits that EPAS offers. There is no major or irreversible modifications made to your vehicle, as everything is located under your dash and is almost, if not completely, invisible. How the systems work: The computer measures the amount of effort on the steering wheel and amplifies it with the aid of the electric motor. A potentiometer allows you to have more or less assistance, so you can adjust the amount of power assist. For example, you can have maximum power assist while on a parking lot, and less on the highway. Select the EPAS Performance electric power steering kit for your application needs. EPAS Performance electric power steering kits include: * Electric motor unit * Mounting hardware * Prewired control module * Some kits may also be available with steering columns
( 23 )
$1,589.99
—
$1,948.99
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 14 )
$1,682.99
—
$1,920.99
Dakota Digital HDX Series universal rounded rectangle analog gauge kits offer a beautiful one-piece solution for your instrument panel needs. Total depth behind the dash is just 2 in.--a real feat considering the six analog gauge readings plus a large, full-color TFT message center. Integrated capacitive touch switches and supplied sending units, plus BIM Series compatibility makes this package your instrumentation solution. Housing and integrated front bezel are billet aluminum and show chrome plated. All HDX instrument systems feature dead-faced indicators (turn signals, high beam, check engine, cruise control, parking brake, plus two user-definable) and a red, settable warning light for each gauge. They're available in either standard or metric versions. Craft the perfect, one-off dashboard with Dakota Digital HDX Series universal rounded rectangle analog gauge kits. Features, items, and specs include: * Thin-film-transistor (TFT) display provides high-contrast for greater visibility * Large TFT message center can be driver-configured for maximum awareness * Over 30 independent illumination colors for gauge readings, needles, and message center * 12 factory preset color themes * Calibration and custom settings can be done via built-in, capacitive-touch buttons, or free Bluetooth app available for Apple and Android devices * Needle hubs are black, nickel plated, spun aluminum to match the buttons * Central control box mounting simplified via vehicle harness sourced signals and supplied solid-state sending units connecting cleanly to their respective terminals * Mounting hardware
( 1 )
$1,543.75
On Sale
Holley Sniper EFI Quadrajet self-tuning fuel injection systems are ideal replacements when you're tired of rebuilding the 50-plus-year-old Rochester Quadrajet (Q-jet) on your classic ride. They're the first bolt-on, spread-bore, EFI throttle-body systems not requiring any additional adapters, sealing plates, or intake manifold swaps. They retain the same great features as the 4150 Sniper EFI version (four 100 lbs.-hr. injectors; built-in timing control; high resolution 3.5 in. full color touchscreen; etc.). Their throttle body will support naturally aspirated power up to 500 hp. In addition, they offer multiple fuel inlet configurations that allow for a stock-appearing installation and fit most stock air cleaners. Modernize your Q-jet-powered classic vehicle with a Holley Sniper EFI Quadrajet self-tuning fuel injection system. They are offered individually or in Master kits with external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank. Features, items, and specs: * Designed to deliver the signature "Rochester Roar" at wide-open throttle! * Throttle body-mounted ECU–no extra boxes to mount * Only 4 wiring connections required (battery positive and negative, switched ignition, and rpm) * Transmission provisions on throttle lever for TH350/TH400 and 200R4/700R4 * Universal throttle and transmission kick-down bracket * Brake booster adapter (if required) * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required) * Internal fuel pressure regulator preset to 58.5 psi * 20 ft. of 3/8 in. Vapor Guard fuel hose * Fuel pump and filters * Necessary hardware and bulkhead fitting to return fuel to the tank * Genuine Bosch LSU 4.9 wide-band oxygen sensor provides real-time fuel map learning * OEM-style throttle position sensor (TPS) and idle air control (IAC) for years of dependable service * Clamp-on oxygen sensor kit ensures leak-free oxygen sensor installation with stainless steel T-bolt clamps and weld-ready oxygen sensor flange * United States Coast Guard approved (certified to ISO 8846, SAE J1171 requirements) * Available in three finishes--Classic Gold, Shiny, and Black Ceramic
( 7 )
$1,949.95
$1,753.95
Flaming River Microsteer electric power assisted steering kits can easily be fitted to virtually any vehicle where manual steering currently exists. There's no need to change your steering rack or fit a hydraulic system. These kits allow you to adjust the amount of assistance by using a rotary potentiometer—or you can make the system speed sensitive by connecting a wheel speed signal to the tuning box. A mode selection switch on the box allows you to choose your preferred method—manual or wheel speed. Flip the switch and make your vehicle easier to steer or boost the horsepower a bit with a Flaming River Microsteer electric power assisted steering kit. Items and notes: * Motor/gearbox unit (MGU) * Electronic control unit (ECU) * Tuning box * Wiring harness * 11/16 in.-36 input and output shafts
( 3 )
$1,799.99
—
$1,944.99
Vintage Air Gen-V Magnum Max SureFit Systems evaporator kits offer powerful and intelligent climate control. The Gen 5 uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Each evaporator kit includes the evaporator unit with Magnum Max blower and mounting brackets, louvers (where required), duct hose, wiring harness, bolt-in replacement control panel, hardware, and installation instructions. Select the Vintage Air Gen-V Magnum Max SureFit system designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower
Not Yet Reviewed
$1,708.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
