Availability
Showing In Stock Items. Show All 14 Items.
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 10 )
$1,949.95
—
$2,149.95
$1,753.95
—
$1,933.95
Stromberg BIG97 carburetors feature 55 percent increased airflow to put out a whopping 250 cfm! They have the same standard 97 outside shape, but use enlarged 1.175 in. venturi with a super-efficient 20 degree entry angle. The accelerator pump discharge jets are smaller, and flared exit cones build power by slowing down the mixture to reduce turbulence into the manifold plenum. The result is 250 cfm. Stromberg BIG97 Tri-Power carburetors feature: * Signature 97 outside shape and styling * Cast iron base * Reinforced airhorn * Early plenum effect: allows all cylinders to draw from both barrels, giving you dual-plane drivability with a single-plane style top-end horsepower * New power valve circuits improve fuel conditioning: feeds top-end enrichment directly into the emulsion tubes * Ported distributor vacuum: switch in the brass plug (included) and connect your distributor to improve combustion efficiency in cruising mode; you'll run smoother and cooler, with more torque and better fuel mileage * Big S-jet twin-ball inlet valve: accepts 5/16 in. hard line and standard Stromberg fuel fittings * Four finishes available: original equipment style, chrome, chrome/black, or barn find (patina)
( 3 )
$1,560.00
Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the popular EndraShine finish.
( 7 )
$1,952.95
On Sale
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$1,749.95
$1,573.95
Stainless Works offers Performance Connect exhaust systems for a variety of applications. They feature 304 stainless steel construction, optimized airflow, smooth CNC mandrel bends, TIG welding for strength and beauty, and more. They're ideal for use with CTS-V headers. Order the model and options recommended for your vehicle.
( 3 )
$1,535.20
Stainless Works CNC mandrel-bent exhaust systems are the simply the best for improving your vehicle's performance, sound, and mileage. Made of high-grade 304 stainless steel, they offer an array of options to unleash more torque and horsepower while delivering the sound your vehicle has been lacking. Most are designed to use factory hangers. Stainless Works not only offers their Factory Connect option that mates to a factory connection point, but also Performance Connect options for many models. Performance Connect gains more performance than factory connection points allow, and they require the installation of Stainless Works headers (sold separately) to gain the full performance benefit. Stainless Works also builds their mufflers entirely of stainless steel. They will never "burn in," "blow out," or change their tone—ever. Choose from a selection of universal or application-specific muffler designs, including turbo chambered (loud), chambered round (louder—can be reversed for an even more aggressive sound), and turbo S-tube (loudest—may be too aggressive for a daily driver). Additional features of Stainless Works CNC mandrel-bent exhaust systems include: * 304 stainless will never red-rust like cheaper 409 stainless * TIG-welded for strength * Durable 3/8 in. thick flanges * Mandrel-bent (no buckling) for optimal flow * Variety of tip options (varies by application) * Truck exhausts available with three exit locations: behind the passenger tire; under the rear bumper (one on each side); and in front of the passenger tire * Install-Ready; all systems come with all necessary parts to make installation as smooth as possible
( 30 )
$1,535.20
Stainless Works offers Factory Connect exhaust systems for a wide range of cars, trucks, and Jeeps. They're designed to improve sound and performance. The bolt-on systems connect to the factory manifolds or Stainless Works headers. You can select either a classic muscle car tone of a chambered muffler, or go for the extreme with S-Tube style mufflers. Components are built from corrosion-resistant 304 stainless steel and TIG-welded at the company's state-of-the-art facility in Streetsboro, Ohio. Smooth mandrel pipe bends optimize exhaust flow. Factory Connect systems are available in a variety of styles (cat-back, rear axle-back, etc.), configurations, pipe sizes, tip styles, and more. Order the model with options recommended for your vehicle.
( 2 )
$1,535.20
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
