Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
127 Results Found For "ratio"
Currie 9 in. Third Members
Currie 9-inch third members are designed to fit Ford 9-inch applications. The case is made from nodular iron and installed is a Currie TwinTrac® posi differential in 31 spline, or Eaton TrueTrac differential in the 35 spline options. All Currie third members include a big bearing "Daytona" pinion support, are fully assembled, and delivered ready to install.
( 6 )
$1,550.00
—
$2,000.00
Vintage Air Ford Front Runner Engine Drive Systems
Vintage Air offers their totally cool Front Runner engine drive systems for your small block Ford! With a unique design focused on performance, Vintage Air Ford systems are strong, compact, and extremely good looking. They feature a patented, one-piece, forged aluminum timing cover with integral accessory mounts and utilize a spring-loaded tensioning system for no-nonsense, trouble-free operation. Systems are available for power steering with or without pump and non-power steering applications in your choice of bright or black hard coat finishes. Vintage Air Ford Front Runner engine drive systems may include: * ARP stainless 12-point bolt and hardware * 170 amp alternator * Dayco OEM tensioner * Timing cover gasket set * Dayco serpentine drive belt * Power steering pump * 4-bolt crankshaft pulley * High performance water pump * Water pump pulley * Power steering pump pulley
( 11 )
$1,640.99
Jesel Sportsman Series Shaft Rocker Arms
Since their release, Jesel Sportsman Series shaft rocker arms have proven themselves to be the ultimate replacements for inadequate stud rocker assemblies on OEM and aftermarket cylinder heads. The 2024 aluminum bodied rocker arms are designed to withstand open spring pressures of up to 900 lbs., while maintaining precise valve lash settings. They are designed to bolt on with little to no cylinder head modifications and in most cases still fit under a stock valve cover. The rocker geometry is preset and engineered using the common valve supplied with the specific cylinder head to provide a bolt-on-and-go installation. If you're still spending aggravating hours adjusting your stud rockers only to have to repeat the procedure the next weekend, Jesel Sportsman Series shaft rocker arms are your solution. Choose a set designed for your application.
( 24 )
$1,535.00
—
$1,765.00
Moser Engineering Ford 9 in. Third Member Assemblies
Moser Engineering Ford 9 in. third member assemblies are designed to help you get that horsepower to the ground. They include your choice of an aluminum, nodular iron, or stock center section, as well as a differential, an axle spline, a U-joint style yoke, pinion support, and gear ratio. Whether you're assembling a daily driver, street rod, or race car, these Moser third member assembly packages will provide the durability that your vehicle deserves.
( 11 )
$1,540.00
—
$2,000.00
March Performance Chevy LS Series Serpentine Kits
March Performance Chevy LS Series serpentine kits offer an exciting new look when mounting an accessory drive in your vehicle. They're designed for vehicles that do not have air conditioning. The driver side features a remote power steering pump with an attractive aluminum cover, while the passenger side has March's own billet alternator (except where noted). An OEM-style tensioner ensures perfect belt tension. All pulleys and brackets are CNC-machined from 6061-T6 aluminum for strength and perfect fit—and hard-coated on high wear areas for durability. Order the kit recommended for your vehicle. LS Series kits include: * Aluminum water pump * March billet alternator (except where noted) * Alternator pulley with fan * Water pump pulley with nose cover * Alternator bracket * Polished spring-loaded belt tensioner with cover * Crank pulley (required adapter sold separately) * Mounting hardware Kits with power steering include: * Type 2 remote power steering pump * Billet pump case * Power steering pulley with nose cover * Mounting hardware
( 1 )
$1,694.99
COMP Cams Ultra Gold ARC Series Aluminum Rocker Arms
Designed specifically for high performance street and race engines, COMP Cams Ultra Gold ARC Series aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold ARC Series aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.
( 114 )
$1,626.95
Eaton Electronic ELocker Differentials
Eaton electronic ELocker differentials offer you the best of both worlds. Imagine having the comfort and convenience of an open differential for around town—and the powerful traction of a full-on locker when it's necessary. This is exactly what the Eaton ELockers provide. With the push of a dash-mounted button, you decide when the differential should be fully locked for maximum traction to both wheels, or free to differentiate for the best fuel mileage and tire tread life. Whether you're running a 2WD or 4WD, open or locked, the Eaton ELockers put the driver in total control! Order the carrier designed for your axle model.
( 12 )
$1,509.99
—
$1,956.99
March Performance Sport Track Ultra All-Inclusive Chevy Serpentine Pulley Kits
Rubber V-belts were first introduced into automobiles back in 1917—and it took over 60 years to find a suitable replacement. March Performance Sport Track Ultra all-inclusive Chevy serpentine pulley kits are the perfect upgrade for lower performing V-belt pulleys. Serpentine belts are more efficient, thicker, reduce slippage, and last longer—and since they use just one tensioner, all the components can be solidly mounted to the engine. These kits include a unique reusable belt tensioner tool which allows you to easily make adjustments, then remove and store the tool till needed. March uses precision CNC construction with 6061-T6 aluminum for a precise fit and solid strength, along with high-quality components and brackets; all mounting hardware is included. There are many advantages to serpentine belts, and with the incredible fit, finish, and construction of March Performance Sport Track Ultra all-inclusive Chevy serpentine pulley kits, you'll get performance and style all in one.
( 3 )
$1,626.99
—
$1,906.99
March Performance Sport Track Chevy Serpentine Pulley Kits
These March Performance Sport Track Chevy serpentine pulley kits are designed for the budget-minded engine builder with the same quality and innovation as the normal March Performance kits. They are designed to mount the air conditioning low and on the passenger side for a compact and clean appearance. The serpentine pulley kits will eliminate belt throwing and offer no-slip operation. These March Performance Sport Track Chevy serpentine pulley kits are manufactured from 6061-T6 billet aluminum and are available in black or silver powdercoated finishes.
( 58 )
$1,532.99
—
$1,972.99
Yukon Gear & Axle Ring and Pinion Gear and Differential Combos
Yukon Gear & Axle ring and pinion and differential combos save time and money by including everything you need in one simple part number. Pro Kits feature a premium Yukon ring and pinion gear set, Yukon Master install kit with high-quality Timken bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the Yukon Gear & Axle ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,502.99
—
$1,977.99
Motive Gear Ring and Pinion Gear and Installation Kit Combos
Want to get back the power and gas mileage that you lost from installing those big tires on your Jeep? Motive Gear makes it easy to re-gear your 4x4 with their ring and pinion gear and installation kit combos. These complete kit combos include front and rear ring and pinion sets, plus front and rear bearing kits, giving you everything you need to re-gear the front and rear differentials in one package. The kits come in a wide range of ratios for most Dana applications. Their quality is the result of years of development, outstanding design, and state-of-the-art manufacturing methods to ensure a perfect fit for an easy install.
( 8 )
$1,510.99
—
$1,986.99
Yukon Gear & Axle Ring and Pinion Sets
Yukon Gear & Axle ring and pinion sets are strong but quiet performers. Designed to handle some of the harshest conditions, these sets utilize the latest design and manufacturing technologies to afford you a smooth running gear that's durable and easy to set up. Yukon ring and pinions are available in hundreds of size, ratio, and axle model options. Whether you're on the street, off-road, or at the track, you'll experience unrivaled power and gear performance. Order the model recommended for your application.
( 174 )
$1,757.99
—
$1,930.99
Spicer Drivetrain Products Ring and Pinion Gear with Installation Kits
Errrr, bang! Clunk clunk clunk. Very few parts last forever, especially those rotating at a high rate of speed. Spicer Drivetrain Products ring and pinion gears are perfect for replacing worn or damaged gears, changing ratios, or when refreshing the differentials. They hob and shave the gears for longevity with minimal mating stress, combine modern designs and materials including heat-treating and shot-peening to maximize life, and use high-grade steel for consistency and exceptional durability. Each gear set meets or exceeds Dana's standards for OEM equipment. Whether you need lower, higher, or the same ratio gears, look into Spicer Drivetrain ring and pinion gears with installation kit, available for hundreds of applications.
( 11 )
$1,588.99
Sonnax Extreme Planetary Assemblies
Pay for what you need and get the quality you want--Sonnax planetary assemblies allow you to choose your level of performance. Their extreme assemblies offer the very best for the most demanding applications with advanced process sun and pinion gears. The 3-step process--cryogenic tempering, shot-peening, and super finish--develops gears with improved grain structure and stability, so they are tougher, more wear-resistant, and better performing. Extreme assemblies are available in four ratios, two flange tooth counts, and two output shaft lengths. Performance, quality, and value--Sonnax extreme planetary assemblies deliver them all. Sonnax extreme assemblies may feature: * Gear ratios: 1.80, 1.69, 1.58, 1.65 * 9310 advanced process sun and pinion gears * 12-tooth or 24-tooth billet clutch drum flange * HY-Tuf or 300M rolled spline long OE or short output shafts * High-strength, steel-backed, PTFE thrust washers * Maximum-duty ring gear
Not Yet Reviewed
$1,977.13
Trail-Gear Assembled Third Members
Trail-Gear assembled third members are off-road strong! These units are built with all-new housings and internal parts and are delivered ready for you to drop into your axle. TG assembled third members feature top-quality ring and pinion gears, lockers, solid pinion spacers for long gear life, and they include triple-drilled flanges to cover common driveshaft patterns. The V6 units feature larger OEM-style V6 gear sets with longer pinion gear. Choose your locker style, case style, and gear ratio for off-road performance from Trail-Gear's selection of assembled third members.
( 2 )
$1,520.00
—
$1,919.93
March Performance Narrow Mount Chevy Serpentine Pulley Kits
March Performance has created a solution for mounting accessory components on the popular Chevy LS motors where low hood clearance and narrow frame clearance is required. Precision CNC-machined from 6061 T-6 aluminum for strength and a perfect fit, pulley kit components are hard coated on high-wear areas for durability and powdercoated for a maintenance-free finish. An OEM-style tensioner ensures perfect belt tension and a canister-style power steering pump provides compact hydraulic pressure for power steering.
( 2 )
$1,578.99
Summit Racing™ Complete Serpentine Belt Systems
These billet serpentine systems are easy to install, budget friendly, and styled just right. Summit serpentine belt systems start with a CNC-machined, 1/2 in. thick, 6061 T6 billet aluminum face plate, which has positive belt adjusting holes for both the alternator and A/C pump, plus beveled edges and a machined Summit logo. You also get CNC-machined 6061-T6 billet aluminum crank, water pump, alternator, power steering, and clutch cover pulleys, plus a chrome 105 or 140 Amp alternator, a chrome Sanden SD-7 A/C compressor with manifold lines (as noted), an as-cast aluminum GM Type 2 power steering pump (as noted), an as-cast GM high-flow water pump, a serpentine belt, and all the mounting hardware you need. It might look fancy, but adjustments are easy, all you need is a pinch bar and a socket wrench.
( 10 )
$1,595.99
—
$1,888.99
March Performance 5.0L Coyote Performance Serpentine Systems
March 5.0L Coyote Performance serpentine systems are perfect for mounting new Ford Coyote V8s into older vehicles! These versatile systems include a highly styled one-piece air conditioning and power steering bracket that provides a rigid support for the A/C compressor and remote power steering pump. Or, you can choose to drive the power steering, water pump, and alternator only. March 5.0L Coyote Performance serpentine systems feature a CNC-machined billet aluminum water pump pulley, along with idlers to ensure a perfect, no-slip serpentine belt wrap. These pulley systems include all necessary mounting hardware, along with detailed instructions.
( 1 )
$1,629.99
—
$1,675.99
Yukon Gear & Axle Zip Lockers
Need traction? Zip! You've got it with Yukon Gear & Axle Zip lockers! With on-demand traction, these lockers offer an air-operated design that allows you to switch from an open differential to 100 percent lockup when you need it. Theses Yukon Zip lockers are the ultimate in driver selectability for the right traction, on-road and off. Built from forged cases with 4320 chromoly internals for added strength, they work with a variety of air-delivery systems and are assembled in the USA. Do you need gripping power--now? You have the control with Yukon Gear & Axle Zip lockers.
( 1 )
$1,539.99
—
$1,571.99
Yukon Gear & Axle Ring and Pinion Gear and Installation Kit Combos
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 14 )
$1,510.99
—
$1,977.99
COMP Cams Shaft Mount Aluminum Rocker Arms
COMP Cams shaft mount aluminum rocker arms are one of the most cost-effective ways to increase horsepower. These shaft rockers were designed using the latest in computer software and engineering. They center the roller tip over the valve tip at the correct time so that the roller tip is never more than 0.020 in. off-center of the valve tip. At the greatest load point, the roller tip contact is on the center of the valve. At valve closing, the roller tip contact is slightly behind the valve centerline. When the valve is at full open, the tip contact is slightly behind the centerline of the valve. The results are more horsepower and better performance.
( 1 )
$1,583.95
—
$1,986.95
USA Standard Gear Ring and Pinion Gear and Differential Combos
USA Standard Gear ring and pinion and differential combos save time and money by including everything you need in one simple part number. Quick Kits feature a USA Standard ring and pinion gear set, Master Install Kit with high-quality Koyo bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the USA Standard Gear ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,513.99
—
$1,975.99
Zumbrota Remanufactured Axle Assemblies
Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.
( 9 )
$1,517.99
—
$1,999.99
March Performance Ultra Style Serpentine Systems
March Performance Ultra Style serpentine systems are designed to convert your standard V-belt pulleys to a single ribbed serpentine belt. The kits are available for Mopar, Chevy, Ford, Oldsmobile, Pontiac, and Buick engines—so they are likely to have your application covered. These systems include billet aluminum pulleys that are clear powdercoated, along with the correct brackets and mounting hardware. March Performance Ultra Style serpentine systems are available with or without power steering to suit your specific vehicle.
( 12 )
$1,547.99
