Free Shipping on Orders Over $125 at Summit Racing

Pro-Filer Performance Products Small Block Chevy All American Race Series CNC-Ported Cylinder Heads

Pro-Filer small block Chevy All American Race Series CNC-ported cylinder heads raise the performance level over as-cast small block Chevy heads. Their 68cc CNC-machined combustion chambers and 235cc CNC-ported intake runners allow for the use of 2.125 in. O.D. intake valves over 335 cfm of airflow. Each unit is cast from aerospace A356 aluminum alloy and includes improved solid rocker bars for stability, drilled and tapped end pads, and revised spark plug locations for improved flame travel. For all-around performance on land or sea, install Pro-Filer small block Chevy All American Race Series CNC-ported cylinder heads. Additional Information: * Bronze guides for reduced stem wear * Available with or without water jackets * For 400+ c.i.d. engines * Use gasketed 3/4 in. reach plugs like NGK R5671-7 Series, or colder

Not Yet Reviewed

$1,574.99

John Dow Low-Profile Gasoline Carrytanks

Easily transport and transfer gasoline wherever it's needed! John Dow low-profile carrytanks provide the convenience of a portable refueling station for farm, construction, recreation, industrial, and fleet markets. They're specifically designed to fit within the bed of a pickup truck and below the height of the truck bed sides. These self-contained tanks come with a 12 V power source; simply hook up and start pumping with the hose and automatic nozzle. You can easily transport the gasoline carrytank to a vehicle or leave it in a convenient spot on-site. Features include: * Rugged linear polyethylene construction * Fill level gauge * 12 V transfer pump delivers fuel at 10 gallons per minute * Automatic dispensing nozzle with removable drip tray * Integrated forklift pockets for moving when full * Molded handles make it easy to lift and carry the tank when empty * Integrated recesses are provided for securing tanks with ratchet straps during transport * Protective and lockable cover * Fits easily in the bed of a pickup truck below the truck bed sides * Internal baffle prevents sloshing during transport IMPORTANT: This carrytank is for use with gasoline fuel only. DO NOT use with other fuels or liquids. It is the user's responsibility to comply with local, state and federal requirements pertaining to safe transportation, loading and discharging tank contents.

Not Yet Reviewed

$1,799.99

On Sale

QuickTime Bellhousings

QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.

4.51 out of 5 stars ( 108 )

$1,649.95

On Sale

MBRP Armor Pro Series Exhaust Systems

MBRP Armor Pro Series exhaust systems are designed and built for the most serious enthusiast who will settle for nothing less than top of the line. Optimized durability is provided by the mandrel bent T304 stainless steel construction, additional benefits of this material are its ability to be easily cleaned while withstanding extreme conditions, on or off the road. All of the tubing is mandrel bent for maximum exhaust flow and mandrel bending ensures no rippling in the bends. The end result is that these exhaust systems give you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. In addition, these exhaust systems bolt to the OEM exhaust hangers and includes all necessary hardware to complete the installation.

3.75 out of 5 stars ( 4 )

$1,674.99

—

$1,699.99

$1,554.99

—

$1,599.99

BendPak Steel Approach Ramps

BendPak steel approach ramps make it easier to get your low-profile car on to the lift without risk of damage. Their ramps offer heavy-duty construction, extended lengths, a low-rise design, a textured surface for better tire grip, and extra width to support big wheels and vehicles. BendPak ramps include brackets and necessary hardware to set them up. Choose a pair of ramps designed for your BendPak lift.

2.0 out of 5 stars ( 1 )

$1,550.00

Trick Flow® PowerPort® 240 Cylinder Heads for Big Block Mopar

Once you see Trick Flow® PowerPort® 240 heads for big block Mopar in action, you'll agree they are the only aftermarket aluminum heads worth using on your engine! What makes PowerPort® 240 heads so great? For starters, they're made from premium grade A356-T61 aluminum. That's important because it weighs a lot less than cast iron and is very strong. Trick Flow® engineers then fixed the shortcomings of the factory head design by relocating the oil holes for the rocker shafts and optimizing the shape of the runners to increase flow velocity and add much needed strength to the shaft bosses. Fully profiled combustion chambers and CNC Street Ported runners guarantee proper dimensional accuracy and balanced flow from runner-to-runner for maximum power potential. Additional advantages of PowerPort® 240 heads over stock heads include clearance for 3/8 in. pushrods, ductile iron valve seats, bronze alloy valve guides, and multi-angle valve seat machining on precision Serdi® equipment. Assembled cylinder heads come with premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, chromoly and titanium retainer options, and 7 or 10 degree steel valve stem locks. Since swapping cylinder heads can be a costly and time-consuming process, Trick Flow® designed the PowerPort® 240 heads to accomodate all factory-style big block Mopar pistons. They are also manufactured to accept aftermarket roller rocker arms, intake manifolds, and headers. They are available fully assembled or as bare castings. Sold individually.

4.88 out of 5 stars ( 32 )

$1,549.99

—

$1,649.99

COMP Cams HRT Max Power Master Camshaft Kits

COMP Cams HRT Max Power Master camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created these more complete, perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power MK-kits include: * HRT Cam * Lifters * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)

4.17 out of 5 stars ( 6 )

$1,644.95

—

$1,839.95

COMP Cams Thumpr Retrofit Hydraulic Roller Cam and Lifter Kits

Musclecar sound is back and nastier than ever with these Thumpr retrofit hydraulic roller cam and lifter kits from COMP Cams! These cams feature a thumping high performance idle and provide significant horsepower and torque increases. Specially engineered profiles are offered for each unique engine, providing the perfect combination of an early intake valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize your engine's nasty-idling characteristics without negatively impacting streetability. These kits include high-quality matched lifters for unbeatable performance, durability, and ease of installation.

4.55 out of 5 stars ( 22 )

$1,545.95

—

$1,745.95

COMP Cams Xtreme Energy Retrofit Cam and Lifter Kits

COMP Cams Xtreme Energy retrofit cam and lifter kits are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy kit available for you. By using an aggressive lobe profile, these kits provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.

4.22 out of 5 stars ( 40 )

$1,545.95

—

$1,676.95

Summit Racing™ Pro LS Piston and Rod Kits

Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Precision wrist pins and retainers * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control

4.84 out of 5 stars ( 19 )

$1,504.97

—

$1,662.97

Edelbrock Performer Cylinder Heads

All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.

3.86 out of 5 stars ( 42 )

$1,587.50

—

$1,933.50

Trick Flow® Twisted Wedge 11R® 227 Cylinder Heads for Small Block Ford

Twisted Wedge® 11R 227 cylinder heads represent Trick Flow's ultimate development of the Twisted Wedge® innovation, featuring Trick Flow's most efficient combustion chamber design. The combustion chamber and valve layout move the intake valves away from the cylinder walls to reduce valve shrouding, significantly improving flow at higher lift. Shallow 11° intake/13° exhaust valve angles improve piston-to-valve clearance for high lift cams and reduce chamber volume for improved compression and efficiency. High velocity runners are optimized on the flow bench and dyno proven to outperform the competition on hydraulic roller camshaft engines. Premium materials and components, along with world-class CNC processes, guarantee uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. Machined castings increase strength and have a billet-like appearance. Additional features include CNC-profiled combustion chambers, 2.080"/1.600" stainless steel intake/exhaust valves, Trick Flow® by PAC Racing valve springs, and titanium retainers. Twisted Wedge® 11R 227 heads have CNC Competition Ported runners with a premium high- resolution finish for ultimate performance. Cylinder heads are available fully assembled or as bare castings. Sold individually. Key Features: • 227cc intake ports and 56cc or 66cc combustion chambers • 2.080 in. stainless steel intake valves • 1.600 in. stainless steel exhaust valves • .625" thick deck • Titanium retainers • 11 degree intake valve angle • 13 degree exhaust valve angle

Not Yet Reviewed

$1,549.99

Summit Racing™ Pro LS Crank and Rod Kits

Summit Racing™ Pro LS crank and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. Order the kit recommended for your vehicle and engine. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in.

4.0 out of 5 stars ( 1 )

$1,599.98

On Sale

AMP Research PowerStep Vision Running Boards

View the intelligence of the AMP's Smart Series in a new light with their PowerStep Vision. Featuring an all-new LED glow lighting system integrated seamlessly into a reimagined step profile, they provide an innovative and unique electric running board experience. AMP Research PowerStep Vision running boards are meticulously engineered and crafted with anodized cast aluminum steps, hinges, and corrosion-resistant stainless steel hinge pins. Both step surfaces receive a military-grade PTFE coating, further guarding against corrosion and unsightly wear for years of reliable service. The technology of the PowerStep Vision combines the ease and convenience of a power retracting step with built-in full-length LED lighting, offering vibrant illumination, guiding your steps for maximum safety and stability. When the steps retract, their radiant lighting transforms into color-customizable accent lighting for a sleek, custom appearance. Select the Vision PowerStep designed for your vehicle. Features and benefits: * Steps automatically deploy when you open door * AMP's classic LED courtesy lights activate when running boards are deployed * Vision's flagship lighting operates at full power when steps are deployed, then dim once retracted for sleek, color-changing accent light functionality * Integrated remote operation with AMP Research Smart Series smartphone app (iOS and Android) * Premium, single-motor design automatically deploys and retracts boards * Corrosion-resistant cast-aluminum construction for strength and durability * Anodized finish with military-grade PTFE coating * Extra-wide, non-slip 6-in. step surface runs the length of the cab * Tuck under vehicle when retracted for amazing ground clearance * PowerStep deploys lower than most other steps * Includes vehicle-specific installation guide and mount kit * Sturdy, rocker-panel-mounted brackets * Simple plug-and-play integration using the OBDII module * 5-year limited warranty * 600 lb. load capacity

Not Yet Reviewed

$1,999.99

$1,799.99

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

5.0 out of 5 stars ( 2 )

$1,899.95

—

$1,999.95

Trick Flow® GenX® 225 Cylinder Heads for GM LS2

Trick Flow GenX® 225 cathedral port cylinder heads are fully CNC-machined to significantly increase the performance of 6.0L LS2 engines. Trick Flow engineers altered the valve angles from 15° to 13.5° to decrease valve shrouding, increase mid-lift airflow, and improve rocker arm-to-valve cover clearance. Top-of-the-line CNC Competition Ported runners have a premium high resolution surface finish for maximum flow and performance. The spark plugs were relocated in the CNC-profiled combustion chambers to enhance mid-lift airflow and increase the rigidity of the casting for extreme horsepower applications. Material was added at the rocker arm mounting points to increase high-rpm valvetrain stability. Trick Flow GenX 225 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 4.8L, 5.3L, 5.7L, and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 3 )

$1,524.99

—

$1,574.99

Trick Flow® Twisted Wedge® Race 195 Cylinder Heads for Ford 4.6L/5.4L 2V

Trick Flow Twisted Wedge® Race 195 cylinder heads are perfect for big bore Ford Modular 2V engine builds as well as engines with superchargers or turbos, high compression E85, big shot nitrous oxide, and other mega-power combinations. The secret lies in the CNC-profiled Twisted Wedge combustion chambers and intake valves moved to the opposite side of the cam. These features provide dramatic increases in mid-lift airflow, piston-to-valve clearance, and valve-to-bore clearance for using higher lift cams and larger valves without altering bore size or flycutting pistons. Trick Flow Twisted Wedge Race 195 heads have fully CNC Competition Ported runners with a premium high resolution surface finish for ultimate performance. Larger, stronger valves and race-duty valvetrain components give these heads 8,000-plus rpm capability. Other features include OE PI-style intake inlets, patented replaceable cam bearing journals (no more junking heads because of trashed cams!), 3/4" thick decks, and 3/4"-reach spark plugs. Trick Flow Twisted Wedge Race 195 heads fit all 2V Romeo and Windsor engines and accept all OE-style camshafts, followers, lash adjusters, valve covers, and most OE Ford front covers. The heads are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 2 )

$1,899.99

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$1,899.95

—

$1,999.95

Trick Flow® Twisted Wedge 11R® 205 Cylinder Heads for Small Block Ford

Something great just got better! Trick Flow® used advanced 3D solid modeling and CAD tools (plus a couple decade's worth of racing experience) to turn its track-proven Twisted Wedge® design into the potent Twisted Wedge® 11R 205 head for serious performance enthusiasts and racers. Trick Flow® Twisted Wedge® 11R 205 heads are a direct replacement for previous Twisted Wedge® heads and work with all Twisted Wedge-specific pistons. New high velocity, race-inspired CNC Competition Ported runners have been optimized for today's popular bore and stroke combinations, and have a premium high resolution finish for ultimate performance. Modified 11 degree intake and 13 degree exhaust valve angles and a restructured, CNC-profiled combustion chamber arrangement provides more airflow and performance potential. Premium certified materials and components, along with the finest CNC tooling, are used to ensure uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. The fully machined castings are very strong and have a great-looking, billet-like appearance. Trick Flow® Twisted Wedge® 11R 205 cylinder heads are available fully assembled or as bare castings and sold individually.

5.0 out of 5 stars ( 7 )

$1,524.99

—

$1,574.99

Bestop Skyrider Retractable Tops

Introducing Bestop's all-new Skyrider retractable tops for the Ford Bronco 4-door models with a hardtop. Designed for the 2021 to current model year Ford Bronco, the Skyrider is taking the factory modular hardtop to a whole new level. The large dual-row opening now becomes convenient to achieve on-demand and gives all passengers that unmistakable top-off sensation. Skyriders are an all-season upgrade that replace the factory top panels and achieve the driving experience you crave from your Bronco. The innovative 3-panel top unlatches from the front. Once the two folding front panels are removed, the top slides back easily from outside the Bronco to create an expanded open-air experience. For ease of operation, the slide mechanism of the Skyrider is enhanced with a cam profile gas-assist side bow mechanism that makes opening the top smooth and easy. The sturdy construction and durable materials used in each Skyrider stand up to year-round and all-weather use. Order the material and pattern you prefer.

5.0 out of 5 stars ( 2 )

$1,599.99

—

$1,799.99

Peterson Fluid Systems R4 Oil Pumps

Peterson Fluid Systems R4 oil pumps utilize a revolutionary twisted lobe rotor design, allowing for all-aluminum rotors in all sections—saving a huge amount of weight while also increasing performance. Offered in wet and dry sump styles, the pumps are designed with shallow-depth screw-in fittings, creating low-profile modular units that can be outfitted with numerous options to be suited for a variety of applications. Hundreds of models are available; select the options that best suit your application. Peterson Fluid Systems R4 oil pumps feature: * 6061-T6 billet aluminum * CNC-machined for precision * Unique twisted 4-lobe rotor * Tab mounting system to save weight * Low profile for easier mounting * Wet sump pumps are single stage * Dry sump pumps are offered in 2 to 8 stages * Stages refer to total number of pumping bodies including one pressure section

4.5 out of 5 stars ( 2 )

$1,501.99

—

$1,932.99

Longacre Elite Wired Scales

Introducing the innovative new Longacre Elite Wired Scale Systems, revolutionizing the measurement process with unparalleled efficiency and convenience. These comprehensive systems include a control box housed in a durable case, 12 in. x 12 in. (or 15 in. x 15 in.) low-profile pads and a pad carrying case, all ready for immediate use straight out of the box. What sets each system apart is seamless integration with your personal tablet or phone, made possible by an enhanced Longacre Connect app, available for both Android and iOS devices and featuring free app updates. The scale pads are perfect for Street Stocks, Legends, Dwarf, Mini Cup, and Karts. Setting up your measurements is a breeze with the included cables that effortlessly connect the pads to the control box. You can then link the system to your personal device via Bluetooth, ensuring hassle-free measurements. Whether you're working indoors or outdoors, Longacre's extended Bluetooth connectivity provides an increased range for your convenience. The control box display is a game-changer, offering quick access to all four wheel weights, cross weight, as well as partial percentages and weights with just the push of a button. Alternatively, you can view live weights and memory sessions side-by-side, along with all weights and percentages simultaneously, using the Longacre Connect app on your personal device. These systems enhance your note-taking and data organization, boasting improved memory capacity and streamlined data export capabilities through the Longacre Connect app. Plus, with an internal bridged pad design that eliminates pad flex, you can trust that your measurements will remain accurate even with off-centered loads. Say goodbye to the complexities of measurement-taking—the Elite Wired Scale Systems from Longacre provide a user-friendly, comprehensive solution for your needs. Key features: * Longacre's most feature-packed, wired scale system to date! All Elite wired scales now include Bluetooth 5.0 connectivity for 2024, providing a hybrid user experience in a traditional wired-scale package. * Elite scales function as a standalone wired scale system that can also be used as a powerful, wireless racing setup tool. * Effortlessly connect your scales to your preferred Android or iOS device with a simplified, but secure, pairing process. * Control box display shows all 4 wheel weights, cross weight, and partial percentages/weights. A single memory session can be saved for quick retrieval through the control box display. * Optionally pair with the Longacre Connect app to expand the capabilities of the Elite system. Taking measurements with wired scales has never been more efficient and convenient. * View live weight and saved data simultaneously on the main, user-configurable screen including corner weights and partial percentages. * Benefit from additional note-taking, organization, ride-height, and alignment pages. * Extended memory capacity saves all setup data and allows effortless data export through email or file-sharing using the wireless device. * Complete system includes: 12 in. x 12 in. (or 15 in. x 15 in.) low-profile pads with a durable powdercoat finish, storage case, and batteries. * Pre-configured system is ready to use out of the box. Bring your own device and pair with the new and improved Longacre Connect app for Android and iOS, offering free app updates. * Longacre's internal bridged pad design ensures precise readings by eliminating pad flex, providing accurate measurements even with off-centered loads.

5.0 out of 5 stars ( 3 )

$1,800.99

—

$1,874.99

On Sale

FiTech Ultimate LS EFI 500 HP Fuel Injection Systems

FiTech has some of the best-engineered and priced throttle body systems on the market. Their LS EFI 500HP fuel injection systems bring incredible ingenuity to the market. FiTech fabricated many aluminum parts for these systems, including the low-profile 92mm billet throttle body, high-volume billet fuel rails, and an intake manifold with 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mates 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touchscreen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. A suction cup mounting bracket puts the controllers at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. FiTech LS EFI 500HP fuel injection systems with transmission controller provide impressive power and performance, while allowing you to save a little green for your next tires. Additional features: * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touchscreen hand-held controller with data log features

3.21 out of 5 stars ( 42 )

$2,107.00

$1,625.40

—

$1,997.99

Trick Flow® PowerPort® 320 Cylinder Heads for Big Block Chevrolet

Perfect for high performance street/strip, racing, and marine big block Chevy engines, Trick Flow® PowerPort® 320 cylinder heads deliver exceptional mid- to high-rpm performance. The Fast As Cast® rectangular runners flow almost as much air as fully CNC-ported heads right out of the box. That means you'll get CNC-ported performance for about the same price as regular cast heads. The fully CNC-profiled, heart-shaped combustion chambers have CNC bowl blended valve seat transitions to promote high velocity and huge airflow volume, plus 24 degree valve angles with 4 degree side cants to further increase airflow. Other features include premium, high-strength aluminum castings, extra-thick decks and walls for porting, and adjustable guideplates. Trick Flow® PowerPort® 320 cylinder heads are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 2 )

$1,549.99

—

$1,849.99

96 Results Found For "profile"