Free Shipping on Orders Over $125 at Summit Racing

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.33 out of 5 stars ( 21 )

$1,799.95

—

$1,899.95

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.36 out of 5 stars ( 11 )

$1,649.95

—

$1,999.95

Homak 44 in. RS Pro Flip Top Power Service Carts

Homak 44 in. RS Pro flip top power service carts are available in 8-drawer or 9-drawer models. Constructed from 18-gauge steel, the workstation carts are available in four color options: Midnight Black, Rally Sport Blue, Fury Red, and Battleship Gray. Additional product details: * Power tool drawer with power strip includes four electric outlets and two USB ports to efficiently store, organize, and charge power tools in one place * Top till includes full-extension gas struts and a lockable security compartment with an additional power strip to store and charge phones, laptops, and other devices * Four 5×2 in. casters with a weight capacity of 520 lbs. each: two swivel locking and two swivel * Equipped with HMC High Security Locking System to keep valuables safe and secure * Heavy-duty rubber grip push handle provides comfortable grip and easy maneuverability * Full-length black aluminum contoured, scoop-style lift latch drawer pulls prevent drawers from opening and provides hassle-free access to tools * Drawers with replaceable ball-bearing slides have a 100 lb. weight capacity per slide pair * Non-slip PVC foam drawer liners and top mat to keep tools stationary * Bold UV protective high-gloss powdercoat finish provides a sleek look to overall design

Not Yet Reviewed

$1,679.99

—

$1,909.99

COMP Cams HRT Max Power Master Camshaft Kits

COMP Cams HRT Max Power Master camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created these more complete, perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power MK-kits include: * HRT Cam * Lifters * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)

4.4 out of 5 stars ( 5 )

$1,644.95

—

$1,839.95

Sunex Tools JUIC'D Box 7 Drawer Powered Carts

Sunex Tools JUIC'D Box 7-drawer powered carts offer a variety of features that will benefit any DIY or professional mechanic or tradesman: * Efficient charging hub: Say goodbye to tangled cords and crowded outlets. These power drawer carts include integrated power strips, offering convenient device charging solutions. From power tools to smartphones, keep everything charged and ready for action. * Modular power tool drawer: The modular power tool drawers can accommodate over 20 power tools, ensuring easy access and organization. Whether you're a professional or an auto enthusiast, these carts empower you to work smarter, not harder. * Secure storage: Protect your valuable tools with confidence. Each of the seven drawers is fully extendable and lockable with a barrel lock, providing secure storage for your equipment. Enjoy peace of mind knowing your tools are safe and sound. * Mobility and durability: Designed for the toughest environments, they feature four heavy-duty 6 in. casters (two locking/swivel and 2 fixed) for effortless mobility. The 4-corner bumpers ensure both your toolbox and vehicle are protected from damage.

Not Yet Reviewed

$1,779.99

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$1,999.95

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$1,999.95

Homak 54 in. TECH Series Rolling Cabinets

Homak 54 in. TECH Series rolling cabinets are the perfect shop box. These stainless steel units feature a power drawer with a power strip that includes four electric outlets and two USB ports to efficiently charge and store your power tools and equipment in one place. The stainless steel work surface is durable enough to handle the tough and dirty jobs your projects require. TECH tool chests are outfitted with an HMC High Security Tubular Locking System and lift latch drawer pulls to prevent drawers from accidentally opening during transportation—keeping both you and your tools safe and secure at all times. Each drawer is fitted with non-slip PVC drawer liners to customize your tool storage and to keep tools from scratching and sliding. Smooth, removable ball-bearing drawer slides hold up to 100 lbs. per slide pair and keep tools easily accessible. The rolling tool chests have two swivel locking and two fixed 5×2 in. casters, providing stability and easy maneuverability around the workshop. Each caster has a weight capacity of 520 lbs. to give you the maximum storage capacity. Additional details: * Available in three bold colors: Midnight Black, Rally Sport Blue, and Fury Red * Constructed from 19-gauge steel, 1mm thick * Seven drawers with replaceable ball-bearing slides have a 100 lb. weight capacity per slide pair * Bold UV protective high-gloss powdercoat finish provides a sleek look to the overall design * Heavy-duty rubber grip steel push handle provides comfortable grip and easy maneuverability * Full-length black aluminum lift latch drawer pulls prevent drawers from opening and provides hassle-free access to tools

Not Yet Reviewed

$1,573.99

McLeod RXT 1200 Clutch Kits

Intended for the high horsepower street/strip fan, McLeod RXT 1200 twin disc clutch kits are able to handle 1,200 crank horsepower. With a higher clamp load than standard RXT twin disc clutch kits, RXT 1200 clutch kits can handle almost any horsepower you can throw at them and still remain streetable. Ceramic-lined clutch discs provide smooth engagement with a stock-like pedal feel to make them ideal for the street performance enthusiast. A flat-style flywheel with a crank relief of 6.250 in. diameter or less is required for proper fitment.

5.0 out of 5 stars ( 12 )

$1,595.00

Bed Wood and Parts Bed-In-A-Box Standard Kits

Bed Wood and Parts Bed-in-a-Box standard kits include your unfinished wood choice, mild (paintable) steel bed strips, and zinc coated hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box standard kit designed to fit your application!

Not Yet Reviewed

$1,835.00

Bed Wood and Parts Bed-In-A-Box Deluxe Kits

Bed Wood and Parts Bed-in-a-Box Deluxe kits include your unfinished wood choice, polished stainless steel bed strips, and matching hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box Deluxe kit designed to fit your application!

5.0 out of 5 stars ( 1 )

$1,745.00

Wilwood Forged DynaPro 6 Big Brake Front Brake Kits

Wilwood Forged DynaPro 6 Big Brake front brake kits offer enhanced street performance and stopping power for your American muscle and vintage hot rods. Traditional non-ABS spindle vehicles benefit from the combination of Wilwood forged billet 6-piston DynaPro calipers and your choice of high performance rotors (including their SRP drilled and slotted with E-coat) and Smart Pad brake pads. Wilwood Forged DynaPro 6 Big Brake front brake kits will complement your street/strip ride with improved braking capacity, performance, and looks.

4.67 out of 5 stars ( 89 )

$1,519.64

—

$1,987.95

Baer Brakes SS4+ Disc Brake Systems

For serious stopping power, check out Baer's SS4+ disc brake systems. They're designed to fit most 15 in. wheels, and feature Baer's S4 4-piston caliper mounted to a 2-piece slotted, drilled, and zinc plated rotor. Kits include high-grade stainless hardware and a pre-assembled 2-piece rotor. These systems are available for the front or rear, in black, silver, and red finishes. Order the model designed for your axle and wheel bolt pattern. If you've been looking for a street-legal, lightweight, drag strip or autocross-compatible brake system—you've come to the right place!

4.3 out of 5 stars ( 10 )

$1,549.95

—

$1,949.95

Ford Performance Parts Camshafts

Ford Performance Parts guys live, eat, and sleep Ford. Their camshafts are designed for everything from mildly modified street rods to full-out drag racers. All Ford Performance Parts camshafts are designed for more power; with either improved low-to-mid rpm torque, or mid-to-high rpm horsepower. They're available in many different durations and valve lifts, in your choice of hydraulic, solid, or hydraulic roller lifter configurations. Depending on application, features may include: * More lift and duration * Available to work with stock pistons * No valve spring change required for some applications * Offered in grinds that provide noticeable power improvements with a lumpy idle while maintaining good drivability with manual transmissions * Also available as true street-strip camshafts that work best with manual transmissions or higher stall speed torque converters and high numerical rear-end gears * Offered in versions that work well with carburetors or mass air fuel injection

4.89 out of 5 stars ( 81 )

$1,694.99

Ridetech Rear Coil-Over Upgrade Packages

Ridetech rear coilover upgrade packages include everything needed to give your muscle car a lowered stance with dramatically improved handling and ride quality. The systems contains rear Strongarms and either single-adjustable HQ Series or triple-adjustable TQ Series coilover shocks. Component features: * Rear Strongarms--provide added strength to help get the power to the pavement. They utilize R-joint Technology to provide smooth operation and reduce roll bind. Lower arms feature a double sheer mount for the coilovers locating them in place of the stock springs, keeping the load where it belongs. * HQ Series coilovers--impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. * TQ Series coilovers--remote reservoir triple-adjustable shocks feature rebound adjustment along with dual stage (high-speed and low-speed) compression adjustment. High-speed adjustment allows tuning for impact harshness and low-speed adjustment allows tuning of cornering characteristics, perfect for use on the autocross, road course, and drag strip.

5.0 out of 5 stars ( 1 )

$1,860.00

Sunex Tools 6-Drawer Slide Top Utility Carts

Sunex Tools 6-drawer slide top utility carts have stainless steel work surfaces that slide open for additional top storage. They're available in different powdercoat color finishes. Product features: * Patented protective edge bumpers absorb damage to cart * 6 full-length latching drawers for maximum storage and security * Hemmed and embossed drawers for added strength and durability * Latching handles keep drawers secure when closed and prevent accidental opening * Built-in integrated power strip for power tools and charging items in the workplace * Built-in pry bar, screwdriver, and extension storage * 37 in. handle for easy maneuvering

Not Yet Reviewed

$1,589.99

Chevrolet Performance Bowtie Aluminum Cylinder Heads

Chevrolet Performance Bowtie aluminum cylinder heads offer an ideal combination of street drivability and drag-strip performance. These aluminum cylinder heads provide a broad power range with ample low-end torque, along with excellent throttle response, good mid-range torque and enough top-end power to beat your competitors to the finish line. Designed for high performance applications, the Bowtie Street cylinder heads are manufactured to precise machining tolerances, with thick deck surfaces and high-velocity airflow passages. They are available in either rectangular or oval intake port configurations. The rectangular intake ports are larger in volume and have been designed to enhance high-rpm horsepower, which makes them best for vehicles that see frequent drag-strip action. Cylinder heads with oval intake ports are smaller in volume and designed for greater low-rpm torque, therefore they're best for street applications, where lots of bottom end, off-the-line power is desired. Bowtie Street Cylinder Head Technical Notes: * Made from 356-T6 aluminum * Available in rectangular or oval-port designs * Will work on Mark IV and Gen V, VI blocks * 9/16 in. thick decks * As-cast intake and exhaust ports * No heat risers * 1.55 in. valve spring seat diameter * Heli-coiled 7/16 in. screw-in rocker stud holes * Designed for use with 3/8 in. pushrods * Use intake gasket P/N 12366985 and bolt kit P/N 12367959 * Use head gasket P/N 12363414 for bores to 4.370 in. and P/N 12363413 for bores 4.470 in. to 4.540 in. (Mark IV) * Use head gasket P/N 12363412 for bores to 4.370 in. and P/N 12363411 for bores 4.470 in. to 4.540 in. (Gen V, VI) * Use head bolt kit P/N 12367779 Bowtie Oval-Port Aluminum Cylinder Head Assembly: * Completely assembled with 2.250 in./1.880 in. 11/32 in. stem valves * 290cc oval intake ports * 110cc exhaust ports * 110cc combustion chambers Cylinder head is assembled with the following components: * 2.190 in. intake valves * Valve spring retainers * 1.880 in. exhaust valves * Valve locks * Valve springs * Valve seals * Valve spring shims * Rocker arm studs * Pushrod guideplates

Not Yet Reviewed

$1,604.12

—

$1,685.52

Homak 72 in. RS Pro Series Hutch Cabinets

Homak 72 in. RS Pro Series hutch cabinets make a great addition to an RS PRO 72 in. toolbox or an excellent upgrade from your current toolbox hutch. The lockable top hutch includes full-extension gas struts, grommet cutouts, and a power strip containing four electric outlets and two USB ports to store and charge phones, laptops, and other devices. These units are equipped with an HMC High Security Locking System to keep valuables safe and secure. They're available in five bold color options. Additional features: * Heavy-duty rubber grip steel handles for comfortable, easy lifting * Durable stainless steel work surface * Toolboard back wall with square pegs for hanging and organizing hand tools * Constructed from 16-gauge steel, 1.5mm thick * Bold UV protective high-gloss 3.2mil powdercoat finish provides a sleek look to the overall design * Lift latch drawer pulls * All drawers structurally stiffened * Removable ball bearing slides * EVA drawer liners and top mat included * Over 20 percent more space than an 18 in. box

Not Yet Reviewed

$1,599.99

NOS Sportsman Fogger Nitrous Oxide Systems

NOS Sportsman Fogger nitrous oxide kits are intended for street/strip racers and are designed to deliver excellent distribution and atomization, along with easy power tuning. They do it by injecting precisely measured amounts of fuel and nitrous into each individual intake port via NOS' patented Fogger nozzles. Power levels are adjustable by changing the jets in each nozzle, and the latest in high-tech solenoids provide an extreme degree of reliability. Forged pistons are recommended for power increases in excess of 40 percent above stock horsepower. Kits include: * Nitrous bottle * Fogger nozzles * Powershot nitrous and fuel solenoids * Aircraft-quality stainless braided supply hose * Jets * Fittings * Tubing * Switches * Wiring * Installation hardware * Tap for threading the intake manifold for the nozzles

Not Yet Reviewed

$1,649.95

—

$1,749.95

Homak 24 in. CTS Lockers

Homak 24 in. CTS lockers are constructed from 19-gauge 1.0mm thick steel, available in three finishes: Fury Red, Midnight Black, and Rally Sport Blue. The units include a power strip with three outlets to charge power tools and equipment; two 6×2 in. swivel locking casters with a weight capacity of 660 lbs. each. They're equipped with an HMC High Security Tubular Locking System to keep valuables safe and secure. Additional details include: * Reversible door allows the locker to be added to either side of the unit * Full-length black aluminum contoured, scoop-style lift latch drawer pulls prevent drawers from opening and provide hassle-free access to tools * One fixed durable stainless steel shelf and two adjustable shelves for customizable storage * Four drawers with replaceable ball-bearing slides that have a 100 lb. weight capacity per slide pair * Non-slip PVC foam drawer liners keep tools stationary * Bold UV protective high-gloss powdercoat provides a sleek look to the overall design

Not Yet Reviewed

$1,729.99

Snow Performance Holley Hi-Ram Water/Methanol Injection Systems

Snow Performance Holley Hi-Ram water/methanol injection systems will unlock 50 to 70 hp on your boosted vehicle, while decreasing your air temperatures by up to 100 degrees F! In gasoline engines—as with any intercooler—water/methanol systems suppress detonation, so more power-producing boost and timing can be utilized. Whether running a supercharger, turbo, or high-compression motor, these Stage 2.5 boost coolers will make the induction charge colder and denser. Holley Hi-Ram plenum plate direct-port water methanol systems with VC-50 controllers contain everything needed to start making big horsepower! System features, items, and specs: * Designed for use in gasoline supercharged/turbocharged vehicles * Increase gas octane by 25 points (up to racetrack levels) allowing full power all the time * Helps remove carbon build-up on valves * Recommended for all street/strip forced-induction vehicles using a turbo or centrifugal supercharger and looking for cooling over a wide range * Supports 1,000-plus hp * Customizable VC-50 Controller proportionally injects more or less water methanol to boost pressure, and offers functionality of boost gauge and water methanol controller in one * Adjustable start and full points for engagement and delivery curve * 8 Snow Performance hyper-sonic water methanol No. 2 nozzles * Snow Performance ACU-SEAL water methanol compression fittings * Snow Performance sleeve-less, OEM-approved, extreme environment 300 psi UHO water methanol pump * Snow Performance running S-engraved low profile nozzle holder * Snow Performance running S-engraved low profile high-flow check valve * Snow Performance solenoids * Stainless hardlines pre-plumbed on plate * 100 percent methanol-resistant (stainless steel, nickel plating, hard anodizing, EPDM)

1.0 out of 5 stars ( 1 )

$1,790.71

Wilwood Forged DynaPro Low-Profile Rear Parking Brake Kits

For popular musclecar rear axle applications needing a parking brake assembly and some extra clearance, Wilwood Forged DynaPro low-profile rear parking disc brake kits provide the solution. Forged billet DynaPro low-profile 4-piston calipers, 11 in. one-piece hat and rotor assemblies, and high-friction pads provide optimal balanced braking for your performance street/strip and show machines. Choose either solid-surface or cross-drilled and slotted rotors to personalize your style and optimize brake performance. These Wilwood brake kits also feature a neatly hidden internal shoe system for a clean installation and superior static holding power for parking. Get bolt-on performance and looks for competition or show with Wilwood Forged Dynapro low-profile rear parking disc brake kits.

4.67 out of 5 stars ( 69 )

$1,522.73

Wilwood Forged Dynalite Big Brake Front Brake Kits

With Wilwood Forged Dynalite Big Brake front brake kits, you'll be ready for show, street, or strip! Track-ready performance and high-tech style come with oversized rotors, forged billet Dynalite calipers, and high performance Wilwood SmartPads. These front brake kits are fully compatible with OE master cylinder output. Options for the caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines! The choice is yours for big stopping power--choose Wilwood Forged Dynalite Big Brake front brake kits.

4.62 out of 5 stars ( 135 )

$1,599.39

—

$1,846.59

Overland Vehicle Systems Nomadic 2 Extended Roof Top Tents

Overland Vehicle Systems Nomadic 2 extended roof top tents are made from the finest materials, starting with a heavy-duty, double insulated, one-piece diamond plated base assembled using marine grade stainless steel hinges and hardware. And to make the tents 4-season ready, the roof top body is constructed using a 600D heavy-duty poly/cotton rip-stop canvas that is built to stand the test of time through the harshest of conditions you can put yourself in. Perfect for two, add a little adventure to your life with OVS Nomadic 2 roof top tents. Features, benefits, and included accessories: * 600D poly/cotton rip-stop body * 420D polyester oxford waterproof rainfly * 1000G PVC heavy-duty travel cover * 120G fade-less glaze breathable windows * Zinc plated window rods * Skylight with mesh screen * 3 in. high-density foam mattress with quilted cover * Double insulated, one-piece black diamond plated base * Marine-grade 304 stainless steel construction and hardware * Aluminum anodized poles with black sleeve * 350 lb. capacity, 96 in. telescoping ladder with locking strap, steel hinges, and 600D bag * Ground stakes and paracord rope * Two 600D rip-stop shoe storage bags with internal and external pouches * Removable mesh storage loft with zipper pouch * Removable Velcro® USB-powered LED light strip * Built-in interior storage pouches * 2 plus sleeping capacity * 750 lb. weight capacity * 4-Year Limited Warranty

Not Yet Reviewed

$1,599.99

37 Results Found For "powers strip"