Availability
Showing In Stock Items. Show All 11 Items.
These MSD Atomic EFI fuel injection systems are the perfect choice for anyone planning on converting from carburetor to fuel injection. They include a throttle body, power module (with wideband oxygen sensor), and handheld controller. The throttle body features an integral ECU built on the side, incorporating the TPS, MAP, IAT, and fuel pressure sensors, all in one location. Fuel delivery is provided by four precision 80 psi injectors featuring a stainless steel ball and seat metering method for maximum internal sealing. They also use internal fuel rails, providing a sleek appearance and removing fitting connections where leaks can develop. Atop the Atomic EFIs are annular booster rings that deliver superior atomization of the best fuel mixture, ensuring the best possible fuel delivery. Best of all, the MSD Atomic EFI fuel injection systems bolt directly to any standard square bore carbureted intake manifold and accept the same linkage as most carburetors. The 1.75 in. diameter throttle inlets ride in precision roller bearings for a smooth pedal transition. The Atomic EFIs' unique TPS is a self-calibrating, non-contact sensor, which means that you don't have to worry about configuring it during setup. The included power module is a remote mounted piece that handles all of the high-current loads. MSD's CAN-Bus technology allows for a single, clean connection between these units and the throttle body mounted ECU. Control all of the MSD Atomic EFI fuel injection systems' functions with the hand-held device. Initial setup takes about five minutes, and you'll answer six questions about your specific engine. After the initial setup is complete, the device can provide you with engine data to help you keep your engine working properly. They also feature a removable micro-SD card to record and store data so that you can see what's going on with your engine.
( 119 )
$1,649.95
On Sale
These MSD 8-Plus CD ignitions produce the same extreme output as the original 8-series, yet they are now in a smaller housing with improved efficiency and internal components. The new 8-Plus ignitions feature built-in, 2-step rev control. Now you can switch between two rev limits without extra wiring or housings. For those who are looking for a dual-fire MSD 8, the MSD 8-Plus CD ignitions are all that you need. MSD's engineers were able to deliver ignitions that are capable of firing two coils at once for those extreme racers using dual plug race setups.
( 3 )
$2,099.95
$1,888.95
On Sale
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$1,749.95
—
$1,999.95
$1,573.95
—
$1,798.95
On Sale
MSD Pro 600 CDI ignition boxes are 8-channel capacitive discharge ignitions designed for high cylinder pressure, high-horsepower engines running coil-near-plug ignition. When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail, MSD PRO 600 boxes are the answer. Features include: * Eight outputs of up to 680 mJ of energy * All necessary wiring harnesses included * Continuous 600 mJ operation, without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kilovolts output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 volts minimum required for starting and running * 12 volts minimum required for 600 mJ opereation * Maximum operating voltage 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Reverse battery protection * Protection against shorted or open coils, and over temperature * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power operation * Fits most coil-per-plug engines up to eight cylinders (including 4- and 6-cylinders) * Additional CAN based features, when used with Holley EFI * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$1,999.95
$1,798.95
MSD Pro Mag 44 electronic points boxes are responsible for controlling the Pro Mag 44's energy, such as the special long duration spark and quick rise time. They feature electronic circuitry that replaces the breaker points. This allows the power of the generator to be released to the coil instantly and at full power. The boxes keep the electricity flowing across the plug for a full 26 degrees of crankshaft rotation, ensuring complete combustion, and they are available with an optional rev limiter.
Not Yet Reviewed
$1,599.95
On Sale
Holley transmission installation kits come complete with everything you need to bolt a TKX or TKO transmission to a 28- or 50-ounce externally balanced small-block Ford engine (depending on kit selected). Built with a mixture of best brands (such as Lakewood, Hays, and Mr. Gasket), the kits include: a roller pilot bearing, bellhousing with dust shield, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, and all hardware needed to install these components. Additional features and notes: * Lightweight cast aluminum bellhousing and steel block plate provide a factory-like installation and appearance * Billet steel, 24.5 lb., 157-tooth externally balanced flywheel for light weight and strength * 26-spline, 10.5 in. clutch disc offers superior clamping force for engines up to 500 hp * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * Adjustable Hydraulic Release Bearing offers reduced pedal effort and easy installation * Works with OE or MSD high-torque starters * All hardware included
( 2 )
$1,799.95
$1,618.95
—
$1,899.95
Manufacturer Rebate
Race ready. Refined road manners. Stack ST8130 street/track day displays are ideal for both Rally and high performance street cars, providing not only all the ST8100 racing features but also meeting street legal requirements. The ST8130 dash displays replace speedometer, tachometer, oil pressure, water temperature, fuel level, voltmeter, oil temperature, odometer, and trip meter functions. Stack ST8130 dash display systems are supplied with sensors (except fuel level), ready wired harness, and manual. Their ultra-lightweight design utilizes sealed (IP67) carbon fiber composite housings, and they are compatible with all conventional and MSD ignition systems and engine types. Each ST8130 can be simply connected to any standard fuel sensor, and unlike conventional gauges, allows you to precisely calibrate the sensor to the tank by using multi-point scaling, so you know exactly how much fuel is in the tank at all times. With these features and many more, plus a user-adjustable Intelligent Alarm system that monitors engine condition 20 times every second and several styling options, a Stack ST8130 street-race display will be an ideal fit for your vehicle. Select the dash display needed for your vehicle. Additional features and notes: * Legendary Stack stepper motor analog tachometer display * User-programmable Intelligent Alarms -- Inboard alarm light and low fuel light -- External shift and alarm light outputs -- 5-stage external sequential shift light option * Waterproof (ideal for roadsters, bikes, and off-road use) * Professional wiring loom with military connector * Combination of analog and digital displays * Simultaneous display of up to four parameters * Optional lap time, predictive lap display
( 1 )
$1,929.99
On Sale
FiTech Go Street EFI 400 hp self-tuning fuel injection systems with Hy-Fuel retrofit modules are a game-changer! There's a large group of enthusiasts who are happy with their ZZ4 crate engine or their '66 Mustang's factory engine, but still want the advantage that EFI has to deliver. FiTech took those needs into consideration and designed and built this Go Street EFI 400 hp system for that purpose. This ready-to-run system strays from the programmable features, and sticks to the basic functions necessary to get the best performance and economy from your street and mild performance engine. So, you can ditch that old carburetor and advance into the EFI world at an affordable price—and without having to sacrifice on performance. FiTech Hy-Fuel tight-fit in-tank retrofit kits are sleek miniature assemblies that allow you to fit a high-volume fuel system into almost any tank, making them perfect for both original and aftermarket fuel tanks. Additional features of these FiTech Go Street EFI 400 hp systems: * Self-learning for wide range of fast dial-in correction * FiTech flow-matched 62 lb. injectors * Pre-programmed with bolt-n-go technology for out-of-the-box performance with no tuning required * Hand-held tuning module for performance tuning * Fan control and AC input (kicks up idle) * EZ-Tach input, reads tach signal from: Coil, HEI, MSD/CDI and many other brand ignitions (no timing control) * Wideband 4.2 * On-board fuel pump driver * Annular discharge design * For non-boosted engines (normally aspirated applications only) * Attractive cast finish * Plus, many more features
( 1 )
$1,956.99
$1,761.29
Baja Designs OnX6+ 40 in. Racer Edition LED light bars are engineered for extreme lighting performance in high-speed situations. The OnX6+ Racer Edition light bar, with its secret mad scientist design will give you the competitive advantage. Not only will these powerful LED light bars provide you with an abundance of bright light, but the Racer Edition is engineered to withstand speeds of 110+mph. To streamline installation, the OnX6+ 40 in. Racer Edition light bar includes mounting brackets and necessary hardware. Plus, with an IP69K waterproof rating, these light bars are pressure washable for worry-free maintenance. These light bars also include Baja Designs 30-day satisfaction guarantee and their limited lifetime warranty to provide your with the ultimate in purchase protection. Product highlights: * One 40 in. OnX6+ Racer Edition LED light bar (wiring harness not included) * Aircraft-Grade aluminum housing with Mil-Spec black anodized finish * Clear hardcoated polycarbonate lens * Includes mounting bracket and stainless steel hardware * Built-in overvoltage protection * uService replaceable lenses and optics * ClearView all the light, right where you need it * MoistureBlock waterproof, rain proof, submersible * IP69K waterproof rated and pressure washable
Not Yet Reviewed
$1,647.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
