Free Shipping on Orders Over $109 at Summit Racing

Fleece Performance LML CP3 Conversion Kits

Why convert your LML's fuel system from a CP4 to a CP3? Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms—resulting in costly repairs for owners when a CP4 fails. You can improve your LML Duramax's reliability and fueling capability, as well as avoid costly failure with Fleece Performance LML CP3 conversion kits. They provide OEM fit-and-finish features, like Fleece's exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and their valley feed line to support aftermarket lift pump applications. Fleece Performance LML CP3 conversion kits are offered with or without pump and the pump kits come in two different style pumps—a Bosch CP3 injection pump or Bosch CP3 pump with heavy-duty 10mm cam. Choose the kit that is right for you. All kits include: * CP3 to rail high pressure fuel line * High-flow CP3 feed and return fuel fittings * Preformed fuel feed and return fuel hoses * CP3 mounting adapter * Dosing injector distribution block, feed and return lines * FCA extension harness * Low pressure fuel feed line * Hardware kit

Not Yet Reviewed

$1,999.00

FiTech Easy Street 600 HP EFI System Force Fuel/Go-Spark Fuel Injection Master Kits

FiTech Easy Street 600 hp EFI system Force Fuel/Go-Spark fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with a Force Fuel system, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Plus, these kits also provide upgraded spark performance for improved combustion and power output. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer. Fuel delivery options: * Go Fuel Force Fuel system--mounts under the hood and is fed with the original mechanical or electric fuel pump, and then supplies the EFI system with the required high-pressure with the internal 340 lph pump. A 1/2 gallon reservoir prevents fuel starvation, while an internal regulator keeps the pressure at a consistent 58 psi. To ensure clean fuel to the injectors, a serviceable 10-micron fuel filter is supplied along with 5 ft. of hose, AN fittings, return line fitting bung, and liquid-filled gauge. * Go Fuel Mini Force Fuel system is ideal for cramped engine compartments and is s fed through a low-pressure mechanical (or electric) pump saving the need to modify the entire fuel system. Equipped with an efficient 255 lph pump and internal regulator to deliver a consistent 58 psi. Can be installed in four positions and is supplied with hose, AN fittings, return line fitting bung, and liquid-filled gauge.

Not Yet Reviewed

$1,546.99

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

5.0 out of 5 stars ( 2 )

$1,899.95

—

$2,149.95

$1,708.95

—

$1,933.95

FiTech Go EFI Classic 650 HP System In-Tank Pump/Go-Spark Fuel Injection Master Kits

If you prefer the restored or classic hot rod look, FiTech's Go EFI Classic Series should be your choice. You get the performance benefits of modern fuel injection, with the looks of a vintage carburetor--without the flooding, vapor lock, and cold start issues. And FiTech's master kits will also provide a fuel delivery option, allowing you to take your setup from carburetor to EFI all with one part number. FiTech Go EFI Classic 650 hp system in-tank/Go-Spark fuel injection master kits package a gold or black Classic throttle body with a fuel cell single pump module for your high-pressure fuel needs and a Go-Spark CDI ignition for high-powered sparks that improve combustion and power output. Choose your preferred throttle body finish. Features: * Go EFI Classic throttle body features FiTech's advanced self-tuning fuel metering technology and will support engines rated up to 650 hp. Thanks to the dual bolt pattern, the throttle body will easily bolt onto most intake manifolds and throttle linkages. The ECU of the Classic Series is compact and easy to mount out of sight to maintain a restored engine compartment, but you'll notice the fuel injection benefits every time you turn the key! * Go Fuel single fuel cell pump module is ideal for running a fuel cell or custom tank. It features a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.

Not Yet Reviewed

$1,691.99

FiTech Go Port EFI Standalone System Force Fuel/Go Spark Fuel Injection Master Kits

FiTech Go Port EFI standalone system Force Fuel/Go-Spark fuel injection master kits combine a high-flow (850 cfm) FiTech throttle body with an integrated ECU, plus a fuel delivery system that makes converting your carbureted engine to EFI easier and an upgrade to high-powered sparks for improved combustion and power output. The Go Port EFI standalone system supplies everything needed to adapt your intake and fuel rails--sensors, harness, gaskets, and a hand-held touch screen controller. FiTech Go Fuel Force Fuel system supports the demands of an 800 hp engine on gas. It is easy to mount, and a serviceable 10-micron fuel filter is supplied to ensure clean fuel reaches the injectors. The reservoir holds a 1/2 gallon of fuel to submerge an internal electric fuel pump, keeping it cool with no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance, and the Force Fuel system also includes 5 ft. of high-pressure fuel hose, fittings, return line fitting bung, and a liquid-filled gauge. Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire nonmagnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.

Not Yet Reviewed

$1,981.99

FiTech Go EFI 2-Barrel 400 HP Force Fuel/Go-Spark Fuel Injection Master Kits

FiTech Go EFI 2-Barrel 400 hp Force Fuel/Go-Spark fuel injection master kits deliver electronic fuel injection with a fuel delivery solution. Each master kit pairs the 400 hp throttle body with a Force Fuel system, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Plus, these kits also provide upgraded spark performance for improved combustion and power output. Choose the FiTech master kit with your preferred fuel delivery system. The Go EFI 400 hp throttle body is perfect to update your 2-barrel fed cruiser with the drivability benefits of electronic fuel injection. It has an incorporated ECU producing a simple installation with only a few wires to connect (fuel pump, ignition, power, and tach). FiTech Go EFI 2-barrel is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer. Fuel delivery options: * Go Fuel Force Fuel system--mounts under the hood and is fed with the original mechanical or electric fuel pump, and then supplies the EFI system with the required high-pressure with the internal 340 lph pump. A 1/2 gallon reservoir prevents fuel starvation, while an internal regulator keeps the pressure at a consistent 58 psi. To ensure clean fuel to the injectors, a serviceable 10-micron fuel filter is supplied along with 5 ft. of hose, AN fittings, return line fitting bung, and liquid-filled gauge. * Go Fuel Mini Force Fuel system is ideal for cramped engine compartments and is s fed through a low-pressure mechanical (or electric) pump saving the need to modify the entire fuel system. Equipped with an efficient 255 lph pump and internal regulator to deliver a consistent 58 psi. Can be installed in four positions and is supplied with hose, AN fittings, return line fitting bung, and liquid-filled gauge.

Not Yet Reviewed

$1,535.99

FiTech MeanStreet 800 HP EFI System Regulated In-Tank Pump/Go Spark Fuel Injection Master Kits

FiTech MeanStreet 800 HP EFI system regulated in-tank pump/Go-Spark fuel injection master kits include fuel delivery solutions to make converting your carbureted vehicle to EFI easier, plus a CDI that delivers high-powered sparks to improve combustion and power output. These systems feature FiTech's power packed MeanStreet EFI throttle body. It is nitrous compatible with eight injectors, an onboard ECU, MAP sensor, and internal fuel pressure regulator to deliver a simple, clean installation. MeanStreet's annular swirl, wet flow technology provides the most complete fuel atomization available, and using FiTech's proprietary self-tuning technology, combined with easy tuning with the supplied handheld touch screen monitor, you'll have your high-powered engine tuned and ready for the street or track. Each matte black MeanStreet EFI throttle body includes cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For your fuel delivery, a Go Fuel 340 lph in-tank regulated pump offers a simplified approach to fuel delivery for fuel injected engines with its single line system. It has a low-profile design, is suitable for most EFI-ready tanks with a depth of 6 1/2 in. to 15 in., and features an -6 AN pressure port and a 4 Bar (58 psi) regulator. The Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.

Not Yet Reviewed

$1,615.99

FiTech Go EFI Classic 650 HP System Force Fuel/Go-Spark Fuel Injection Master Kits

If you prefer the restored or classic hot rod look, FiTech's Go EFI Classic Series should be your choice. You get the performance benefits of modern fuel injection, with the looks of a vintage carburetor--without the flooding, vapor lock, and cold start issues. And FiTech's master kits will also provide a fuel delivery option, allowing you to take your setup from carburetor to EFI all with one part number. FiTech Go EFI Classic 650 hp system Force Fuel/Go-Spark fuel injection master kits package a gold or black Classic throttle body with a Go Fuel Force Fuel system, plus an upgrade to high-powered sparks for improved combustion and power output. Choose your preferred finish and fuel delivery system. Go EFI Classic throttle body features FiTech's advanced self-tuning fuel metering technology and will support engines rated up to 650 hp. Thanks to the dual bolt pattern, the throttle body will easily bolt onto most intake manifolds and throttle linkages. The ECU of the Classic Series is compact and easy to mount out of sight to maintain a restored engine compartment, but you'll notice the fuel injection benefits every time you turn the key! Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery system options: * Go Fuel Force Fuel supports the fuel demands of an 800 hp engine on gas using an internal 340 lph pump. The reservoir holds a .5 gallon of fuel to submerge an internal electric fuel pump, keeping it cool with no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance. Force Fuel kit is supplied with 5 ft. of high-pressure fuel hose, 10-micron fuel filter, AN fittings, return line fitting bung, and a liquid filled gauge. * Go Fuel Mini Force Fuel supports fuel demands up to 600 hp. These smaller versions are ideal for cramped engine compartments, can be installed in four positions, and feature a reservoir with an efficient 255 lph pump with an internal regulator delivering a consistent 58 psi for your EFI system. The Mini is supplied with a high-pressure fuel hose, AN fittings, return line fitting bung, and a liquid filled gauge.

Not Yet Reviewed

$1,691.99

FiTech Go Port EFI Standalone System Force Fuel Injection Master Kits

FiTech Go Port EFI standalone system Force Fuel/Go-Spark fuel injection master kits combine a high-flow (850 cfm) FiTech throttle body with an integrated ECU, plus a fuel delivery system that makes converting your carbureted engine to EFI easier. The Go Port EFI standalone system supplies everything needed to adapt your intake and fuel rails--sensors, harness, gaskets, and a hand-held touch screen controller. Along with that will be FiTech's Go Fuel Force Fuel system. If you think electronic fuel ejection is too complex or expensive to achieve, FiTech will change your mind. FiTech Go Fuel Force Fuel system supports the demands of an 800 hp engine on gas. It is easy to mount, and a serviceable 10-micron fuel filter is supplied to ensure clean fuel reaches the injectors. The reservoir holds a 1/2 gallon of fuel to submerge an internal electric fuel pump, keeping it cool with no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance, and the Force Fuel system also includes 5 ft. of high-pressure fuel hose, fittings, return line fitting bung, and a liquid-filled gauge.

Not Yet Reviewed

$1,770.99

FiTech Go EFI Classic 650 HP System Regulated In-Tank Pump/Go-Spark Fuel Injection Master Kits

If you prefer the restored or classic hot rod look, FiTech's Go EFI Classic Series should be your choice. You get the performance benefits of modern fuel injection, with the looks of a vintage carburetor--without the flooding, vapor lock, and cold start issues. And FiTech's master kits will also provide a fuel delivery option, allowing you to take your setup from carburetor to EFI all with one part number. FiTech Go EFI Classic 650 hp system regulated in-tank pump/Go-Spark fuel injection master kits package a gold or black Classic throttle body with a Go Fuel regulated in-tank pump module, and a Go-Spark CDI ignition for high-powered sparks that improve combustion and power output. Choose your preferred throttle body finish and fuel delivery system. Features: * Go EFI Classic throttle body features FiTech's advanced self-tuning fuel metering technology and will support engines rated up to 650 hp. Thanks to the dual bolt pattern, the throttle body will easily bolt onto most intake manifolds and throttle linkages. The ECU of the Classic Series is compact and easy to mount out of sight to maintain a restored engine compartment, but you'll notice the fuel injection benefits every time you turn the key! * Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Choose either a 255 lph or 340 lph Go Fuel in-tank regulated pump. Both offer a simplified approach to fuel delivery for fuel injected engines with their single line systems. They have a low-profile design, are suitable for most EFI-ready tanks with a depth of 6 1/2 in. to 15 in. and feature an -6 AN pressure port and a 4 Bar (58 psi) regulator.

Not Yet Reviewed

$1,580.99

—

$1,589.99

FiTech Go EFI 4 600 HP Fuel Injection Systems with Force Fuel Systems

FiTech Go EFI 4 600 hp fuel injection systems with Force Fuel systems combine the self-tuning, 4-injector setup with a versatile Force Fuel sump. The Go EFI 4 600 systems are designed for use on engines from 250 to 600 hp. They feature a built-in fuel pressure regulator and an ECU that self-adjusts to find the best tune—plus the ability to change air/fuel ratios and ignition timing on the fly. The Force Fuel systems connect to your stock mechanical or electric fuel pump and supply the EFI system with high-pressure. They do so through the use of an internal 340 lph (approximately 90 gph) pump—no new feed line from your tank is necessary. Ditch that old carburetor and advance hassle-free into the modern EFI world with a FiTech Go EFI 4 600 hp fuel injector and Force Fuel system combo. Models are available with a variety of options; select the system best suited for your application.

2.57 out of 5 stars ( 7 )

$1,622.99

—

$1,879.99

FiTech Go EFI 4 PA 600 HP System/Go Spark Fuel Injection Master Kits

FiTech Go EFI 4 PA 600 hp system/Go Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their Go EFI 4 Power Adder TBI with their Go-Spark CDI ignition and either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. The throttle bodies are available in different finishes. Choose the master kit with your preferred finish and fuel delivery solution. Go EFI 4 Power Adder system can support up 21.7lbs of boost right out of the box, as well as a single stage of wet nitrous. The air/fuel ratio is monitored and adjusted with FiTech's fast reacting self-learning technology, plus the ignition timing can be controlled based on boost or nitrous (including a retard feature). A touch screen handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info is included. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. *Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

Not Yet Reviewed

$1,706.99

—

$1,716.99

FiTech Go EFI 2-Barrel 400 HP System/Go-Spark Fuel Injection Master Kits

FiTech Go EFI 2-barrel 400 hp system/Go-Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. FiTech mates their 2-barrel TBI with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. And going a step further, the Go-Spark CDI ignition will elevate the spark for even more improved performance. Go EFI 2-barrel TBIs have the ECU incorporated, producing a simple installation with only a few wires to connect (fuel pump, ignition, power, and tach). Each throttle body is supplied with handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Go-Spark produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. Fuel cell pump modules are offered in two models—single or dual pump. Each style features a billet machined top assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

Not Yet Reviewed

$1,585.99

FiTech Go EFI 4 PA 600 HP System Fuel Injection Master Kits

FiTech Go EFI 4 PA 600 hp system fuel injection master kits are inclusive EFI kits with fuel delivery solutions. In these master kits, FiTech mates their Go EFI 4 Power Adder TBI with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. Go EFI 4 Power Adder system can support up 21.7lbs of boost right out of the box, as well as a single stage of wet nitrous. The air/fuel ratio is monitored and adjusted with FiTech's fast reacting self-learning technology, plus the ignition timing can be controlled based on boost or nitrous (including a retard feature). A touch screen handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info are included. The throttle bodies are offered in different finishes. Choose the master kit with your preferred finish and fuel delivery solution. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. *Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

Not Yet Reviewed

$1,505.99

MSD Atomic EFI Throttle Body Systems

These MSD Atomic EFI fuel injection systems are the perfect choice for anyone planning on converting from carburetor to fuel injection. They include a throttle body, power module (with wideband oxygen sensor), and handheld controller. The throttle body features an integral ECU built on the side, incorporating the TPS, MAP, IAT, and fuel pressure sensors, all in one location. Fuel delivery is provided by four precision 80 psi injectors featuring a stainless steel ball and seat metering method for maximum internal sealing. They also use internal fuel rails, providing a sleek appearance and removing fitting connections where leaks can develop. Atop the Atomic EFIs are annular booster rings that deliver superior atomization of the best fuel mixture, ensuring the best possible fuel delivery. Best of all, the MSD Atomic EFI fuel injection systems bolt directly to any standard square bore carbureted intake manifold and accept the same linkage as most carburetors. The 1.75 in. diameter throttle inlets ride in precision roller bearings for a smooth pedal transition. The Atomic EFIs' unique TPS is a self-calibrating, non-contact sensor, which means that you don't have to worry about configuring it during setup. The included power module is a remote mounted piece that handles all of the high-current loads. MSD's CAN-Bus technology allows for a single, clean connection between these units and the throttle body mounted ECU. Control all of the MSD Atomic EFI fuel injection systems' functions with the hand-held device. Initial setup takes about five minutes, and you'll answer six questions about your specific engine. After the initial setup is complete, the device can provide you with engine data to help you keep your engine working properly. They also feature a removable micro-SD card to record and store data so that you can see what's going on with your engine.

4.37 out of 5 stars ( 119 )

$1,699.95

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$1,999.95

—

$2,099.95

$1,798.95

—

$1,888.95

FiTech Go EFI Classic 650 HP System Inline Pump/Regulator Fuel Injection Master Kits

If you prefer the restored or classic hot rod look, FiTech's Go EFI Classic Series should be your choice. You get the performance benefits of modern fuel injection, with the looks of a vintage carburetor--without the flooding, vapor lock, and cold start issues. And FiTech's master kits will also provide a fuel delivery option, allowing you to take your setup from carburetor to EFI all with one part number. FiTech Go EFI Classic 650 hp system inline pump/regulator fuel injection master kits package a gold or black Classic throttle body with an inline pump kit and a Go Fuel Tight Fit regulator with gauge for precise fuel pressure. Choose your preferred finish. Go EFI Classic throttle body features FiTech's advanced self-tuning fuel metering technology and will support engines rated up to 650 hp. Thanks to the dual bolt pattern, the throttle body will easily bolt onto most intake manifolds and throttle linkages. The ECU of the Classic Series is compact and easy to mount out of sight to maintain a restored engine compartment, but you'll notice the fuel injection benefits every time you turn the key! The fuel delivery system is an inline fuel pump kit supplied with FiTech's heavy-duty 255 lph external fuel pump suitable to support engines producing up to 600 hp. The kit includes 40 ft. of high-pressure fuel hose, two billet fuel filters, fittings, mounts, and clamps. The Go Fuel single output regulator can be adjusted from 30 to 70 psi, will support up to 1,000 hp, and is crafted from billet aluminum with -6 ORB ports along with a vacuum/boost port and includes gauge.

Not Yet Reviewed

$1,510.99

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$1,999.95

—

$2,099.95

$1,798.95

—

$1,888.95

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$1,899.95

—

$2,149.95

$1,708.95

—

$1,933.95

Nitrous Outlet Dedicated Fuel Systems

Separate and specific, a setup just for your nitrous--dedicated fuel systems from Nitrous Outlet. A fuel enrichment system devoted to your nitrous removes the strain from your vehicle's stock system and gives you more control. These dedicated setups come with custom-built, lightweight, high-density plastic or heavy-duty, hand-welded aluminum fuel cells. A fuel pump, regulator, hose, fuel lines, and fittings complete the systems. Just about all of them are compatible with high or low fuel pressure by changing a spring inside of the fuel regulator, and they require no modifications to install. Create a distinct setup for your nitrous with Nitrous Outlet dedicated fuel systems.

4.0 out of 5 stars ( 1 )

$1,515.99

—

$1,782.99

FiTech Go EFI Classic 650 HP System Inline Pump/Regulator/Go-Spark Fuel Injection Master Kits

If you prefer the restored or classic hot rod look, FiTech's Go EFI Classic Series should be your choice. You get the performance benefits of modern fuel injection, with the looks of a vintage carburetor--without the flooding, vapor lock, and cold start issues. And FiTech's master kits will also provide a fuel delivery option, allowing you to take your setup from carburetor to EFI all with one part number. FiTech Go EFI Classic 650 hp system inline pump/regulator/Go-Spark fuel injection master kits package a gold or black Classic throttle body with an inline pump kit, a Go Fuel Tight Fit regulator with gauge for precise fuel pressure, and a Go-Spark CDI ignition for high-powered sparks that improve combustion and power output. Choose your preferred finish. Go EFI Classic throttle body features FiTech's advanced self-tuning fuel metering technology and will support engines rated up to 650 hp. Thanks to the dual bolt pattern, the throttle body will easily bolt onto most intake manifolds and throttle linkages. The ECU of the Classic Series is compact and easy to mount out of sight to maintain a restored engine compartment, but you'll notice the fuel injection benefits every time you turn the key! The fuel delivery system is an inline fuel pump kit supplied with FiTech's heavy-duty 255 lph external fuel pump suitable to support engines producing up to 600 hp. The kit includes 40 ft. of high-pressure fuel hose, two billet fuel filters, fittings, mounts, and clamps. The Go Fuel single output regulator can be adjusted from 30 to 70 psi, will support up to 1,000 hp, and is crafted from billet aluminum with -6 ORB ports along with a vacuum/boost port and includes gauge. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.

Not Yet Reviewed

$1,721.99

Aeromotive Phantom 340 Stealth EFI Dual Rail Fuel Systems

Aeromotive Phantom 340 Stealth EFI dual rail fuel systems include all the main components (including the highly sought, baffled Phantom 340 fuel pump) required to create a proper return-style EFI fuel system for engines with dual billet fuel rails. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your fuel-injected street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive dual rail Phantom 340 Stealth fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Ideal for naturally aspirated and blown EFI engines producing 300-700+ flywheel horsepower (street or track) * Requires AN-06 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket * Phantom 340 fuel pump (18688) * Inline filter – 10-micron (12321) * Filter bracket (12305) * Fuel pressure regulator (13131) * Fuel pump wiring kit (16307) * Y-fitting –AN-06 (15672) * Fitting – AN-08 ORB to AN-06 flare (15605) * Six fittings - AN-06 ORB to AN-06 flare (15606) * Two fittings - AN-10 ORB to AN-06 flare (15609) * Liquid-filled gauge – 0-100 psi (15633) * Must be used with a return style fuel system * Designed for in-tank use only

Not Yet Reviewed

$1,706.60

Aeromotive Phantom 340 Stealth EFI Returnless Rail Fuel Systems

Aeromotive Phantom 340 Stealth EFI returnless rail fuel systems include all the main components (including the highly sought, baffled Phantom 340 fuel pump) required to create a proper return-style EFI fuel system for engines with OEM-style returnless fuel rails. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your fuel-injected street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive returnless rail Phantom 340 Stealth fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Ideal for naturally aspirated and blown EFI engines producing 300-700+ flywheel horsepower (street or track) * Requires AN-06 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket * Phantom 340 fuel pump (18688) * Inline filter – 10-micron (12321) * Filter bracket (12305) * Fuel pressure regulator (13131) * Fuel pump wiring kit (16307) * Quick-connect fitting – 3/8 in. to AN-08 (15118) * Fitting – AN-08 ORB to AN-06 flare (15605) * Six fittings - AN-06 ORB to AN-06 flare (15606) * Two fittings - AN-10 ORB to AN-06 flare (15609) * Liquid-filled gauge – 0-100 psi (15633) * Must be used with a return style fuel system * Designed for in-tank use only

5.0 out of 5 stars ( 1 )

$1,718.25

Aeromotive Phantom Carbureted 200 Fuel Pump Kits

Aeromotive Phantom 200 carbureted fuel pump kits include all the main components (including the highly sought, baffled Phantom 200 fuel pump) required to create a proper carbureted fuel system. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your high-performance street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive Phantom carbureted 200 fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Ideal for naturally aspirated and blown carbureted engines producing 300-900 flywheel horsepower (street or track) * Requires AN-08 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket * Phantom 200 fuel pump (18689) * Inline filter – 10-micron (12321) * Filter bracket (12305) * Fuel pressure regulator, bypass style (13204) * Fuel pump wiring kit (16307) * Port plug –AN-06 (15626) * Three fittings - AN-06 ORB to AN-06 flare (15606) * One fitting - AN-08 ORB to AN-08 flare (15607) * Three fittings - AN-10 ORB to AN-08 flare (15610) * Two fittings - AN-06 ORB to AN-08 flare (15649) * Liquid-filled gauge – 0-15 psi (15632) * Must be used with a return style fuel system * Designed for in-tank use only

Not Yet Reviewed

$1,628.60

26 Results Found For "high pressure fuel line"