Availability
Proform wireless vehicle scale kits are designed for the new frontier in chassis set-up! Using real track data and pull down technology to replicate actual chassis position, you're going to need a scale that can handle the forces of the track. This 14,000 lb system is a perfect way to make high capacity measurements accessible to weekend racers, not just Nascar, IndyCar, and F1. This system also has the latest Proform LCD display that includes a few new features. Standard features include thin 16 in. x 16 in. aluminum pads that can be driven onto, an LCD display with cross weight, side/side weight, and front/rear weight in addition to the standard weight and percentage for each wheel and total vehicle weight in both lbs. and kgs. And of course, backlit LCD screen and control buttons, and a foam lined hard case with wheels for storage.
( 2 )
$1,559.99
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 24 )
$1,749.95
—
$1,899.95
$1,573.95
—
$1,708.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 17 )
$1,749.95
—
$1,999.95
$1,573.95
—
$1,798.95
Baja Designs Squadron Sport/S8 40 in. light bar kits are a serious light setup for people who take playing in the outdoors seriously. The Jeep JL / JT Gladiator cowl mounts are the ultimate mounting option for anyone that wants versatility. This bracket can mount one pair of Squadron Series lights with a 40 in. S8 light bar. This package includes two Squadron Sports that each feature four Cree LEDs to produce 3,150 lumens at 26 watts to produce crisp, clear light that pierces the darkness and improves visibility in all conditions. If that wasn't enough, you also get a 40 in. S8 light bar. It pumps out 25,400 lumens of Cree LED power. It does so with a low amp draw to put less strain on your battery. A clean aluminum frame with scalloped housing, machined aluminum bezel, and stainless steel hardware protect the circuity from water or debris. The LEDs last nearly 50,000 hours while exceeding mil-spec testing for reliability, and the steel mounts are powdercoated to last the life of your Jeep. (NOTE: The cowl on the Mojave and 392 models is taller and requires longer M6 x 80mm flange bolts.) * uService – Replaceable lenses and optics * ClearView – All the light, right where you need it * MoistureBlock – Waterproof, rain-proof, submersible * CopperDrive – Only LED driven at 100 percent * 5000K Daylight – Less driver fatigue, natural color
Not Yet Reviewed
$1,595.95
On Sale
Holley Super Sniper EFI Stealth 4150 fuel injection systems are what you need to convert your vehicle to fuel injection. Holley Super Sniper Stealth 4150 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Compatible with draw-through or blow-through forced induction applications * 2 Bar MAP sensor * Integrated ignition timing control * -6AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0-5 V sensors, one sensor ground supply for 0-5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-886 is recommended * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit for 2.250 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange
( 4 )
$2,099.95
$1,888.95
Intercomp Racing wireless kart scales are ideal for Karts, Bandoleros, and other vehicles under 1,600 lbs. (800 kg). The same quality and attention to detail go into these scales as their larger vehicle scales. With pads machined from billet aluminum, Intercomp has the wireless kart scale system best suited to fit your needs. Product features: * Weight percentages displayed in hundredths * 1,600 lb. (800 kg) system capacity [400 lb. (200 kg) pad capacity] * Certified to 0.1 percent accuracy of applied load, or plus/minus 1 graduation, whichever is greater * Fully integrated RFX wireless technology * Center of gravity calculation * User-selectable display modes * Target tune feature * View any combination of scale pad weight and percentage * Baseline setup recall Kit includes: * 10 in. x 10 in. x 2 in. (254mm x 254mm x 51mm) wireless RFX billet pads (4) * Wireless node * 2 AA alkaline batteries per scale pad (400 hr. avg. battery life) * 2-year warranty
Not Yet Reviewed
$1,595.00
On Sale
Holley Sniper EFI Stealth 4150 fuel injection systems feature four 100 lb.-hr. fuel injectors capable of supporting up to 650 hp naturally aspirated. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control--improving idle stability, drivability, and wide-open throttle horsepower! These systems also include transmission kickdown provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications. The 4150 is available individually or in a complete Master Kit (see contents listed below). ALL Sniper EFI Stealth 4150 systems feature: * Bolt-on 4150 flange carburetor replacement * Throttle body mounted ECU; no extra boxes to mount * Supports up to 650 hp with four 100 lb.-hr. injectors * All of the wiring exits below the rear fuel injector cover—for a completely stealth installation * Timed spark part for vacuum advanced distributors located under the front fuel bowl—for easy access to the distributor * Air entry is machined to fit most stock-style air cleaners with air cleaner locator provisions * Only four wiring connections required (battery +, battery -, switched ignition, and RPM) * External fuel pressure regulator required, set to a base pressure of 58.5 psi, such as 12-886 * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Available in three finishes: shiny, ceramic black, and classic gold MASTER KITS also include complete fuel system with an external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank.
( 41 )
$1,749.95
—
$1,799.95
$1,573.95
—
$1,618.95
On Sale
Holley Sniper EFI Quadrajet self-tuning fuel injection systems are ideal replacements when you're tired of rebuilding the 50-plus-year-old Rochester Quadrajet (Q-jet) on your classic ride. They're the first bolt-on, spread-bore, EFI throttle-body systems not requiring any additional adapters, sealing plates, or intake manifold swaps. They retain the same great features as the 4150 Sniper EFI version (four 100 lbs.-hr. injectors; built-in timing control; high resolution 3.5 in. full color touchscreen; etc.). Their throttle body will support naturally aspirated power up to 500 hp. In addition, they offer multiple fuel inlet configurations that allow for a stock-appearing installation and fit most stock air cleaners. Modernize your Q-jet-powered classic vehicle with a Holley Sniper EFI Quadrajet self-tuning fuel injection system. They are offered individually or in Master kits with external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank. Features, items, and specs: * Designed to deliver the signature "Rochester Roar" at wide-open throttle! * Throttle body-mounted ECU–no extra boxes to mount * Only 4 wiring connections required (battery positive and negative, switched ignition, and rpm) * Transmission provisions on throttle lever for TH350/TH400 and 200R4/700R4 * Universal throttle and transmission kick-down bracket * Brake booster adapter (if required) * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required) * Internal fuel pressure regulator preset to 58.5 psi * 20 ft. of 3/8 in. Vapor Guard fuel hose * Fuel pump and filters * Necessary hardware and bulkhead fitting to return fuel to the tank * Genuine Bosch LSU 4.9 wide-band oxygen sensor provides real-time fuel map learning * OEM-style throttle position sensor (TPS) and idle air control (IAC) for years of dependable service * Clamp-on oxygen sensor kit ensures leak-free oxygen sensor installation with stainless steel T-bolt clamps and weld-ready oxygen sensor flange * United States Coast Guard approved (certified to ISO 8846, SAE J1171 requirements) * Available in three finishes--Classic Gold, Shiny, and Black Ceramic
( 7 )
$1,949.95
$1,753.95
On Sale
Holley Sniper EFI Stealth 4500 fuel injection systems are what you need to convert your dragster or Pro-street vehicle to fuel injection. For engines producing 800+ hp, the Sniper Stealth 4500 systems feature eight 100 lbs./hr. injectors and a throttle body that flows a massive 1,440 cfm. These Holley systems come with a USB to CAN tuning cable and free downloadable Sniper EFI software to give you unlimited control of your engine. Holley Sniper Stealth 4500 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Supports up to 1,500 hp naturally aspirated or 1,250 hp forced induction with eight 100 lbs./hr. injectors * Compatible with draw-through or blow-through forced induction applications * 2.125 in. throttle plates, flow 1,440 cfm for large cubic inch engines * 2.5Bar MAP sensor * Integrated ignition timing control * Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange * -8AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Built-in single-stage wet or dry progressive nitrous control * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can be used to trigger or control external devices, such as nitrous solenoids and boost control solenoids. Or to provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0 to 5 V sensors, one sensor ground supply for 0 to 5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-848 is recommended * Customizable secondary fuel pump output (TPS, rpm, or boost enabled) * User-friendly boost control with handheld adjustability * Free software included--comprehensive data logging tool to help you maximize the performance of your engine * Real-time data logging to the included 3.5 in. touch screen allows you to save information to the SD card without needing a communication cable * Programmable target air fuel ratios per boost level * Advanced boost control available via free Sniper EFI tuning software, including boost vs. rpm and boost vs. time * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange
( 4 )
$2,149.95
$1,933.95
On Sale
Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
Not Yet Reviewed
$1,849.95
—
$2,099.95
$1,663.95
—
$1,888.95
On Sale
Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 2 )
$1,849.95
—
$2,099.95
$1,663.95
—
$1,888.95
On Sale
Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 2 )
$1,949.95
—
$2,199.95
$1,753.95
—
$1,978.95
EPAS Performance's Hydroelectric Pump System has a program that works with an angle sensor and CAN protocol. The converter talks to the pump via the angle sensor, ramping up the system's pressure as needed. There is no noticeable delay or drop in pressure when input at the steering wheel is exerted. This steering conversion kit includes 6 ft. of high-pressure sending hose, 6 ft. of low-pressure return hose, and the power cords are 10 ft. in length. An oil cooler can be added for racing applications. The wiring harness is essentially plug-and-play, and only requires a hot ignition source and full battery power. System draw is anywhere between 1 amp to 45 amps, spending most of its time in the lower amp range. Maximum pressure of the unit is rated at 1900 psi @ 5 gpm; and the absolute maximum length of the pressure hose and return lines is 17 ft. INCLUDED IN KIT: * EPAS Performance Hydroelectric Pump * Universal mounting bracket * High-pressure sending hose * Low-pressure return hose * Pre-wired control module
Not Yet Reviewed
$1,884.99
On Sale
Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
Not Yet Reviewed
$1,949.95
—
$2,199.95
$1,753.95
—
$1,978.95
On Sale
Rock Slide Engineering Step Sliders ready your rig for any adventure. Rated for moderate off-road conditions, these fully functional, trail rated, rock sliders are integrated with a power step for easy access for all demographics and everyday use. RSE engineers have incorporated Smart Motor technology to keep your step deploying and retracting consistently, even in cold and harsh weather, and a sleep mode has been built in to minimize battery drainage. Step Sliders also provide protection for the rocker panel on your vehicle. The step will deploy a full 12 in. down from the body of the Slider when the door is opened, then after closing your door, the step will automatically retract and sit flush with the body of the step slider. Rock Slide Engineering Step Sliders feature 10-gauge, 3/16 in. steel construction and a state-of-the-art automated powdercoating system to acid etch the raw base material in preparation for the rugged textured black topcoat. The internals are made of stainless steel and aluminum to prevent rusting. The installation features a plug-and-play system designed to utilize the factory mounting points and the use of a stand-alone wire harness (no splicing or rewiring), allowing you to retain your manufacturer warranty after installation. Step Sliders are available for 2- and 4-door vehicles. Choose the kit designed for your vehicle. Includes: * Both driver and passenger side Step Sliders * Complete stand-alone wire harness * Magnetic door sensors * Additional mounting hardware
( 1 )
$1,979.99
—
$2,639.99
$1,583.99
—
$2,111.99
Designed to withstand the harshest of weather conditions, ARB Elements weatherpoof fridge freezers are perfect for your pickup truck, SUV, Jeep, or camper. The control panel has a dimmable display, a backlit keypad for nighttime illumination, a four-digit pin code electronic locking system, and provides temperature readouts in Celsius and Fahrenheit. Outside, the rugged 304 stainless steel and weatherproof exterior features anodized aluminum latches, concealed front and rear carrying handles, protective corners, ASA vents, tamperproof bolts for permanent mounting, and a provision for a padlock (not included). They also have recessed AC and DC power outlets and a gas strut-assisted lid, which means you no longer need to hold the lid open as you search the for your favorite beverage or snack! Inside, the built-in evaporator helps reduce condensation, a slim line LED illuminates the interior, and the reversible basket with removable divider provides versatile storing solutions. ARB All-Weather Fridge Freezer exterior details include: * Main body and lid constructed from 304 grade stainless steel with raised feature forming and embossed ARB logos on both sides of the cabinet * Strong ASA protective corner pieces on main body and lid with anodized aluminum latches * Weatherproof control panel * Heavy-duty tamper-proof cast stainless steel hinges (non-removable lid) * Recessed rear AC and DC power sockets * Recessed rear remote monitor transmitter positioned to be protected from the weather * ASA vents (including ARB branding) * Tamper-proof bolts for permanent mount options and added security * Provision for padlock for added security (padlock not supplied) * Cooling capacity: +60 degrees F to -0 degrees F (+10 degrees C to -18 degrees C) * Power source: 12/24 DC with 3-stage integrated battery protection system (built-in 100 to 240 V AC; 50 to 60Hz) Interior features include: * Cool zone now extends throughout entire internal cabinet * Increased fridge cabinet insulation thickness * Cavity recess for lid gas strut (including rear drain channel) * Weatherproof control panel * Front cabinet position drain plug * Evaporator height increased (which surrounds both primary and secondary compartments) * Reversible basket with removable divider * Slimline LED rear facing interior light Security features include: * Electronic locking system offers maximum security * 4-digit pin code-protected electronic locking system * Tamper-proof when locked (function keys are concealed by the lid when closed) * Locked/unlocked warning * Backlit keypad for easy use at night * Dimmable display * DC voltage supply readout
( 1 )
$1,649.00
Eddie Marine billet aluminum hydraulic hatch hinges are the ultimate in custom hardware. Operated by a high-pressure hydraulic pump, they will easily open even the most cumbersome of engine hatches—and look great doing it. They feature heavy-duty billet aluminum construction, and are designed to move the engine hatch outward, as well as upward for maximum clearance. Eddie Marine hydraulic hatch hinges mount to the side gunnels of your engine compartment, so they take up less space than traditional floor-mounted electric actuators, affording you more room to move about freely while performing engine maintenance and repairs. Hydraulic hatch hinge kits include: * Pair of brackets with cylinders * Pump with billet mounting bracket * All necessary brass fittings and plastic hoses * Special bypass valve that enables the hatch to be lifted in the case of a dead battery * Available polished or in a variety of anodized and Fusioncoat colors
Not Yet Reviewed
$1,995.95
Racepak LDX Logger dash data recorders combine data acquisition with Racepak's advanced instrumentation! They also take full advantage of the capabilities of V-Net technology. In addition to the wiring harness that imports signals from the engine rpm, drive-shaft rpm, water temperature, oil pressure, and battery voltage, up to 32 optional sensors modules can be attached to the single V-Net network cable. This yields a total recording capability of 37 channels of data. The LDX Logger can record and upload to a PC the data from all of the monitored sensors, while at the same time displaying the input from up to 21 of those functions on the dash screen. With the simple push of a button, you can view the displayed functions by scrolling through four separate screen pages on the dash. Each page contains five user-programmable digital displays, plus the constant engine rpm bar graph. Selecting which functions will appear on each page is done through your Racepak Datalink software. The dash features output ports to connect a shift light and an external warning light. Shift points can be programmed using the screen of the dash or your software. You're also able to assign limits for the warning lights and the parameters for the dash-mounted mode buttons. Minimum and maximum levels that were attained during a recording can also be displayed. One full megabyte of memory provides a generous amount of recording time, while sample rates are programmable up to 100 per second per channel. Uploading data to a PC or laptop is accomplished through an included 6 ft. serial cable. The screen is backlit for nighttime use. Four threaded studs on the rear of the LDX Dash Logger facilitate mounting it to any flat surface.
Not Yet Reviewed
$1,549.95
Monitor temperature, voltage, and more on the go with an ARB Zero Series fridge freezer. Featuring Bluetooth wireless technology, every ARB Zero Series fridge freezer monitors and controls temperature (multi-zone for dual-zone models), compressor status, battery voltage, setting mode (up to three user-defined modes), and power--all via your Android or Apple Bluetooth enabled device! ARB Zero Series fridge freezers also feature a quick-release lid that can be mounted to the front or side of the fridge freezer, for your choice of front or side-opening access. The fridge freezers also have dimmable LED control panels, front and rear DC-power inlets, a front AC power inlet, and a USB port next to the front control panel--perfect for charging mobile phones. Inside, the LED interior lights provide nighttime illumination, the versatile internal basket system can be easily maneuvered or removed, integrated evaporation system reduces condensation, and the highly efficient, variable-speed compressor provides fast and accurate temperature control. Outside, the durable steel outer casing has built-in full height corner moldings for added protection, plus recessed carrying handles with integrated tie-down points. Available in single zone or dual zone configurations. Single Zone fridge freezers feature one temperature controlled compartment while Dual Zone fridge freezers features two, independently controlled compartments.
( 2 )
$1,568.00
—
$1,743.00
With an IP67 debris/water resistance, 1-meter drop protection, and a red beam, the Dewalt 20 V MAX Red Tough Rotary Laser Kits allow users to work in the toughest conditions. Additional product features: * Accuracy of +/-1/16 in. at 100 ft. * Dual axis slope mode for added functionality * Up and down plumb dots * 2,000 ft. range * Scan mode 15/45/90 degrees * Kit includes: Rotary laser, detector, 20 V MAX battery, Target card, Charger, Detector clamp, Tripod adapter, Adapter mount, Enhancement glasses, Tripod, and Storage case
Not Yet Reviewed
$1,639.00
Losi 5IVE-T 2.0 BND: 1/5 4WD Gas Short Course Trucks have all of the unrivaled performance of their predecessor—and includes Bind-N-Drive technology, allowing you to pick the transmitter that best fits your driving style. Key Features: * Genuine Zenoah G320 32cc engine * Innovative Bind-N-Drive * Spektrum SR6000T telemetry-ready receiver * Improved bar style steering rack with adjustable Ackermann * Improved center differential orientation * Improved drive line angle * Heavy-duty brakes * Innovative clutch mount with gear mesh brace * Tough throttle servo brace * Extra-large 800cc capacity fuel tank What's in the box: (1) Grey, Blue & White Losi 5IVE-T 2.0 BND 4WD SCT (1) Spektrum SR6000T 6-Channel DSMR Slim Receiver with Telemetry (1) Zenoah 32cc Gasoline Pull-Start Engine (1) S900S 1/5 Scale Metal Gear Steering Servo (1) S901T 1/5 Scale Metal Gear Throttle Servo (1) Wheel Wrench (1) Rod End/Shock End tool (1) Multi Wrench (1) Spark Plug Wrench (1) Bind Plug (1) Exhaust Gasket 2.0mm, 2.5mm, 3.0mm, 4.0mm Allen Wrenches Product Manual Overview: When the original 5IVE-T was introduced, the world of 1/5-scale off-road racing changed—and this iconic platform became one of the most successful and influential platforms to date. Now get ready for 2.0! The Losi 5IVE-T 2.0 BND: 1/5 4WD Gas Short Course Truck has all the unrivaled performance of its predecessor and includes Bind-N-Drive technology, allowing you to pick the transmitter that best fits your lifestyle. The powerful Zenoah G320 32cc engine has been built specifically for the 5IVE-T 2.0. The revised chassis layout reduces the front driveshaft angle for improved durability and increased 4WD balance. Plus, the new rack-style bellcrank steering assembly makes for easy Ackermann changes and overall improved steering geometry. Additional advances include an updated front hood, upgraded brakes, and hard anodized bleeder caps and shock bodies for improved shock performance. All this ensures the 5IVE-T 2.0 continues to reign supreme. Product Specifications: Type: 1/5th scale 4wd short course truck Scale: 1/5 Length: 38.0 in. (965.2mm) Width: 12.25 in. (527mm) Height: 12.25 in. (311.1mm) Ground Clearance: 2.0 in. (50.8mm) Wheelbase: 24.0 in. (609.6mm) Weight: 35.4 lbs. (16.06 kg) Chassis: 5mm plate, 6061-T6 aluminum Suspension: 4-wheel independent Drivetrain: 4WD Tire Type: Firm, square pin Motor or Engine: 32cc Zenoah G320 Speed Control: SR6000T telemetry receiver Radio: DSMR-compatible (not included) Servos: S900S / S901T Batteries: 2S Receiver LiPo (not included) Gear Pitch: 1.5 MOD Wheel Size: 2.8 in. (71.1mm) wide, 24mm hex Kit/RTR: BND Shock Type: Oil-filled, coilover springs Body: 4-piece, polycarbonate, short course with decals Ball Bearings: Full rubber seal ball bearings in car, metal shield for clutch housing Fuel Tank Capacity: 800cc (27.1 oz.) Assembly Time: Less than 1-hour
Not Yet Reviewed
$1,599.99
The "gold standard" bar for winching has just been raised. Warn Zeon 12 Platinum Series winches introduce the advanced wireless remote--the new command central control to operate the clutch, monitor vehicle battery feedback, and even regulate auxiliary lights and more. Combine this with a new high performance package and extreme waterproofing … and you have the toughest, most technologically advanced winches on the trail today Warn Zeon 12 Platinum Series winch features and functions include: * Rated line pull of 12,000 lbs. * 80 ft. of 3/8 in. aircraft-grade wire rope and a roller fairlead * Clutch is engaged and disengaged with the advanced wireless remote; the unit also controls winch-in, winch-out, and freespool operations * The advanced wireless remote gives you total control in the palm of your hand, allowing you to control the winch and up to two accessories * Includes USB charging cable and car charger adapter * All-new high-speed motor, stronger gears, and heat-treated ring gear deliver 20 percent faster line speed, best-in-class efficiency, and Warn's highest durability rating * Durable aluminum structure--with flat black powdercoat finish and stainless steel fasteners--delivers durability and maximum resistance to corrosion, exceeding 400 hours of salt-spray testing * Large diameter alloy winch drum with steel sleeve is strong and lightweight, reducing rope wear; an integrated rope anchor enables easy rope installation * Extreme waterproofing meets rigorous IP68 standards--the highest rating in the Warn winch lineup for trucks and SUVs * Automatic mechanical cone brake offers excellent control while winching * Convertible control pack can be attached to the winch or remotely mounted, allowing for various winch mounting options and looks (relocation kit required and sold separately)
( 3 )
$1,799.99
Rigid Industries E-50 in. Series LED light bars are the clear choice to light your way. They project twice the light, turn on quickly with no warm-up, won't drain your batteries, and will last longer with 50,000+ hours of life span! They're built with 6061 aluminum extrusion and given a durable UV powdercoated finish. Rigid Industries outfits these bars of illumination with unbreakable, optically clear Lexan lenses and sealed, waterproof connectors, and they include a simple plug-and play-wiring harness with a switch. The E-Series lights are available in several lengths, beam colors, and patterns to suit your application. They have zero UV emissions, an IP68 rating, no hot spots, and no vibration or bouncing beams. Mount a more efficient, brilliant way to light your path with crisp, clear, consistent, Rigid Industries E-Series LED light bars.
Not Yet Reviewed
$2,100.99
Introducing the innovative new Longacre Elite Wired Scale Systems, revolutionizing the measurement process with unparalleled efficiency and convenience. These comprehensive systems include a control box housed in a durable case, 12 in. x 12 in. (or 15 in. x 15 in.) low-profile pads and a pad carrying case, all ready for immediate use straight out of the box. What sets each system apart is seamless integration with your personal tablet or phone, made possible by an enhanced Longacre Connect app, available for both Android and iOS devices and featuring free app updates. The scale pads are perfect for Street Stocks, Legends, Dwarf, Mini Cup, and Karts. Setting up your measurements is a breeze with the included cables that effortlessly connect the pads to the control box. You can then link the system to your personal device via Bluetooth, ensuring hassle-free measurements. Whether you're working indoors or outdoors, Longacre's extended Bluetooth connectivity provides an increased range for your convenience. The control box display is a game-changer, offering quick access to all four wheel weights, cross weight, as well as partial percentages and weights with just the push of a button. Alternatively, you can view live weights and memory sessions side-by-side, along with all weights and percentages simultaneously, using the Longacre Connect app on your personal device. These systems enhance your note-taking and data organization, boasting improved memory capacity and streamlined data export capabilities through the Longacre Connect app. Plus, with an internal bridged pad design that eliminates pad flex, you can trust that your measurements will remain accurate even with off-centered loads. Say goodbye to the complexities of measurement-taking—the Elite Wired Scale Systems from Longacre provide a user-friendly, comprehensive solution for your needs. Key features: * Longacre's most feature-packed, wired scale system to date! All Elite wired scales now include Bluetooth 5.0 connectivity for 2024, providing a hybrid user experience in a traditional wired-scale package. * Elite scales function as a standalone wired scale system that can also be used as a powerful, wireless racing setup tool. * Effortlessly connect your scales to your preferred Android or iOS device with a simplified, but secure, pairing process. * Control box display shows all 4 wheel weights, cross weight, and partial percentages/weights. A single memory session can be saved for quick retrieval through the control box display. * Optionally pair with the Longacre Connect app to expand the capabilities of the Elite system. Taking measurements with wired scales has never been more efficient and convenient. * View live weight and saved data simultaneously on the main, user-configurable screen including corner weights and partial percentages. * Benefit from additional note-taking, organization, ride-height, and alignment pages. * Extended memory capacity saves all setup data and allows effortless data export through email or file-sharing using the wireless device. * Complete system includes: 12 in. x 12 in. (or 15 in. x 15 in.) low-profile pads with a durable powdercoat finish, storage case, and batteries. * Pre-configured system is ready to use out of the box. Bring your own device and pair with the new and improved Longacre Connect app for Android and iOS, offering free app updates. * Longacre's internal bridged pad design ensures precise readings by eliminating pad flex, providing accurate measurements even with off-centered loads.
( 3 )
$1,799.99
—
$1,874.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
