Free Shipping on Orders Over $109 at Summit Racing

Ridetech Strongarms Tubular Control Arms

Ridetech Strongarm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of Ridetech Strongarm tubular control arms; order the kit recommended for your vehicle.

4.61 out of 5 stars ( 18 )

$1,995.00

Ridetech Tru-turn Strongarms Packages

Ridetech Tru-turn Strongarms packages are upgraded control arm systems that include tubular Strongarms, tall ball joints, Delrin bushings, and tie rods. What can you expect from these systems? Resolved bump steer and camber gain issues. Your tires will lean into the turn, the bump steer is optimized to under 0.065 in. through 5 in. of suspension travel, and you have the clearance to run up to a 275mm tire. These packages are available for hundreds of vehicles; order the kit recommended for your application. Features: * Taller upper ball joints to increase camber gain * Integrates with OEM spindles * Centers the wheels in the wheelwell with increased caster settings * Includes upper and lower Strongarms, outer tie rods, and billet tie rod adjusters

5.0 out of 5 stars ( 2 )

$1,710.00

—

$1,775.00

Jesel Sportsman Series Shaft Rocker Arms

Since their release, Jesel Sportsman Series shaft rocker arms have proven themselves to be the ultimate replacements for inadequate stud rocker assemblies on OEM and aftermarket cylinder heads. The 2024 aluminum bodied rocker arms are designed to withstand open spring pressures of up to 900 lbs., while maintaining precise valve lash settings. They are designed to bolt on with little to no cylinder head modifications and in most cases still fit under a stock valve cover. The rocker geometry is preset and engineered using the common valve supplied with the specific cylinder head to provide a bolt-on-and-go installation. If you're still spending aggravating hours adjusting your stud rockers only to have to repeat the procedure the next weekend, Jesel Sportsman Series shaft rocker arms are your solution. Choose a set designed for your application.

4.23 out of 5 stars ( 26 )

$1,525.00

—

$1,765.00

UMI Performance Front Adjustable Upper and Lower A-Arm Kits

UMI Performance complete front adjustable upper and lower A-arms were built with this in mind--to offer the strongest manufactured item on the market, while adding great weight savings over the stock piece. UMI Performance complete front adjustable A-arms are built using strong DOM steel tubing, 0.188 in. CNC-machined shock mounts, Moog Problem Solver greasable ball joints, and QA1 XM Endura series rod ends. A-arms can be installed on the stock K-member or any aftermarket K-member. They are designed to reduce front-end weight, as well as "unsprung" weight, providing improved handling performance to the front of your vehicle. Additional features include: * 1.250 in. x 0.120 in. mild steel tubing * TIG-welded 4130 chromoly threaded tube adapters * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined ball joint cups * Grade 8 shock mounting hardware included * Durable powdercoated finish * Use OEM hardware

5.0 out of 5 stars ( 1 )

$1,529.99

Camburg Engineering KINETIK Series Billet Control Arms

Introducing the Camburg Engineering KINETIK Series billet control arms, the ultimate setup for your rig. These upper arms are meticulously designed and refined to meet high standards. CNC-machined from aerospace-quality 6061 billet aluminum, they are bead blasted, Type II anodized (color options), and feature a laser-etched Camburg logo. Equipped with a larger FK 1.50 in. uniball with a PTFE liner, these arms offer increased strength and misalignment for maximum wheel travel. They're far superior to cheaper imports. The uniball is adapted to the spindle/knuckle using model-specific spacers machined from heat-treated stainless steel. No drilling or modifications are required. The 1.50 in. uniball allows for a larger and stronger 9/16 in. 12-point bolt with a low-profile press-on uniball cap for durability. Additional camber and caster adjustment is possible with the use of larger and stronger FK 7/8 in. chromoly Heim joints, which also eliminate flexing/deflection under hard use and braking without binding. The arms come with AN/Mil-spec hardware, including a single pinch bolt and secondary jam nut for secure Heim joint attachment. The new V2 design increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. All necessary hardware is included for easy installation. The control arms are available for a variety of applications, including many Toyota, Lexus, Chevrolet, GMC, and Ford trucks from 2003 and up. They're designed for 1-4.5 in. of lift, depending on model.

Not Yet Reviewed

$1,599.00

—

$1,999.00

Speedtech Performance USA Tubular Control Arm Packages

Speedtech Performance USA tubular control arm packages provide a pair or lower and upper arms for your vehicle. Each arm is CAD designed and constructed from CNC mandrel-bent DOM tubing. All plate components are laser-cut and CNC-formed for exact tolerances, TIG-welded to the tubing, and then the assemblies are powdercoated gloss black. Speedtech tubular upper arms are assembled with strong and corrosion-free 304 stainless steel cross shafts, featuring a special offset machining process that allows two different base camber settings during alignment. Performance ball joints featuring forged housings, full spherical pins and CV-style dust boots are then installed and custom free-moving spherical bearing-mount sway bar end links wrap up the lower arms. Select the control arm package designed for your vehicle. Both upper and lowers receive: * Non-wearing greasable Delrin® bushings * Urethane bump stops * Grade 8 hardware Construction: * Upper arms are 1.25 in. diameter .120 wall tubing * Lower arms are 1.50 in. diameter .156 wall tubing

Not Yet Reviewed

$1,502.80

TeraFlex Alpine IR Control Arms

TeraFlex Alpine IR control arms offer widespread alignment adjustability for all-out performance on your Jeep. They include advanced independent rotation bushings, make use of factory brackets, and can be added to an existing suspension lift. Reach for your Jeep's maximum potential with TeraFlex Alpine IR control arms. Features and benefits: * Available as full or partial kits (front upper or lower; rear upper or lower) * Durable drawn-over-mandrel tube (42mm diameter x 4mm wall) provides maximum strength * Optimizes caster angle and tunes anti-squat geometry for proper suspension alignment * Re-centers axles in the wheel well for proper suspension movement and/or increased wheelbase * Full range of movement—will not restrict articulation or off-road flex * IR (Independent Rotation) bushings are maintenance-free and provide unrestricted rotation and flex—plus outstanding NVH damping to improve ride quality * Zero-maintenance, forged, threaded joints for smooth and quiet flex * Premium black e-dipped coating provides superb durability and resists corrosion * Anodized 6061 T-6 aluminum clamp collar to secure rod end after length is set * TeraFlex Lifetime Warranty against defects

5.0 out of 5 stars ( 1 )

$1,962.99

UMI Performance Street Performance Control Arms

UMI Performance offers Street performance control arms for a wide range of vehicles—including many Chevrolet and GMC trucks from the 1970s and '80s. These replacement tubular control arms feature heavy-duty cross shafts, Delrin® bushings, and a host of other features. Product details: * Power Tour and daily driver proven * Accepts UMI lowering spring, factory springs and most other aftermarket springs * Heavy-duty tubular construction, yet still strong and light * Delrin® bushings ensure smooth suspension action and precise steering * Adjustable steering stops to fine-tune turning radius * Direct bolt-in * Increased caster improves steering feel and reduces wandering

5.0 out of 5 stars ( 1 )

$1,568.99

—

$1,979.99

On Sale

ADS Billet Control Arms

ADS offers billet control arms for a variety of front and rear Ford Bronco applications from 2021 and up. These cutting-edge arms are CNC-machined from 6061 billet aluminum, designed to correct camber and caster for a smoother ride even in the toughest terrains. The steel or polyurethane/steel bushings reduce deflection, ensuring stability and handling. ADS control arms feature a sleek, black anodized finish to resist corrosion—and they're fully rebuildable for long-lasting performance. Grade 8 hardware is included for ease of installation.

Not Yet Reviewed

$1,749.95

Rock Jock Johnny Joint Control Arms

Rock Jock Johnny Joint control arms allow 30 degrees of unrestricted movement in any direction. The lower arms (made of heavy-wall DOM tubing) are fully adjustable, and the pinion angle and caster can be adjusted—allowing your vehicle to be upgraded without having to replace your control arms. The upper arms are also fully adjustable, to allow complete freedom of movement. The Johnny Joint is used at both ends of the rear arms, front lowers, and one end of the front uppers. Order the model recommended for your vehicle application. For control, handling, and performance, depend on the expertise of Rock Jock.

4.5 out of 5 stars ( 2 )

$1,758.00

—

$1,852.00

Icon Vehicle Dynamics Delta Joint Billet Upper Control Arms

Icon Vehicle Dynamics Delta Joint billet upper control arms are designed to improve the overall performance of your vehicle with corrected front-end geometry, adjustable camber and caster, and improved suspension component clearance. They feature Icon's patented Delta Joint-- a heavy-duty, high-angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. Delta Joints have zinc plated housings providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Their construction and design increase longevity and allow for noise-free operation. Icon Vehicle Dynamics Delta Joint billet upper control arms also feature CNC-machined 6061 billet aluminum construction for a lightweight design with exceptional strength, double adjuster sleeves for on-vehicle adjustments, a vehicle-specific taper pin for OE-like fitment, and a built-in O-ring sealed dust cover cap.

Not Yet Reviewed

$1,549.95

Icon Vehicle Dynamics Billet Rear Link Arms

Icon Vehicle Dynamics billet rear link arms are available for upper and lower positions, and both styles are adjustable. Icon's billet aluminum link arms are significant upgrades over the factory units due to increases in strength and performance. CNC-machined in-house from 6061 aluminum and anodized for corrosion resistance, they feature PTFE-lined FK rod ends for increased suspension articulation and reduced deflection, plus multi-durometer bushings are installed that allow for noise-free operation and maximum angularity without the need for periodic greasing and/or other maintenance. Together, the quality rod ends and bushings allow your vehicle's suspension to function as intended, without the bushing bind that limits the vehicle in stock form. The link arms also offer on-vehicle link arm length adjustability using Icon's double adjuster system. Finally, after the design phase was completed Icon engineers put these parts through the "ICON1K" real-world test cycle for a final stamp of approval. They are covered by Icon's lifetime warranty.

Not Yet Reviewed

$1,525.95

—

$1,761.39

COMP Cams Ultra Gold ARC Series Aluminum Rocker Arms

Designed specifically for high performance street and race engines, COMP Cams Ultra Gold ARC Series aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold ARC Series aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.

4.63 out of 5 stars ( 115 )

$1,626.95

UMI Performance Corner Max Kits

UMI's Corner Max front-end kits are a comprehensive system with UMI's best corner carving parts. They combine geometry corrected A-arms with tall ball joints, higher rate springs, UMI rebound adjustable monotube shocks, heavy-duty sway bar and a bump steer kit. These Corner Max kits are built to make the stock GM clip work as well as it possibly can with a true bolt-on kit. Additional Corner Max kit features: * Exceptional handling at 0-2 in. lowering * Designed to work with factory spindles * Up to 10 degrees static caster without moving the spindle pin * Up to 1.2 degrees per inch camber gain * 1 1/2 in. tall lower and 0.9 in. tall upper ball joints * Easily change shocks and springs at the track with UMI's unique quick-change system * 850 lb./in. race-proven spring rates for exceptional handling * UMI rebound adjustable monotube shock with road race valving, 40 clicks of adjustment * Shocks have easy access adjustment in engine bay area for quick changes at the track * 1 5/16 in. solid sway bar with swivel end links to balance kit properly * Bump steer kit for fine tuning * Thrust bearings and adjusting wrench included for easy height changes * Raced and tested on UMI's 1972 LeMans test car

4.0 out of 5 stars ( 2 )

$1,979.99

Camburg Engineering KINETIK Series Billet Trailing Arms

Upgrade your vehicle with Camburg KINETIK Series billet aluminum trailing arms. These trailing arms replace the factory components, offering improved suspension geometry, increased ground clearance, and enhanced articulation for rugged terrain, making them ideal for high-performance applications to ensure maximum control and stability during aggressive off-road driving. Meticulously crafted from aerospace-grade billet aluminum, these trailing arms are CNC-machined for precision and strength. They are available in anodized finishes that not only provide a sleek and stylish appearance but also offer superior corrosion resistance against harsh elements. They also feature a laser-etched Camburg logo. Engineered to handle extreme conditions, these trailing arms are built for long-lasting durability. Best of all, these billet trailing arms are designed for a straightforward bolt-on installation, requiring no drilling or welding.

Not Yet Reviewed

$1,899.00

SPL Suspension Titanium Series Control Arms

SPL Suspension Titanium Series control arms allow for an increased range of rear camber adjustment, necessary for lowered cars and performance alignments. This provides more stability and predictability to the rear suspension for tighter handling. Using FEA (Finite Element Analysis), the CNC-milled 6061-T6 billet aluminum arms are designed to exceed factory strength and durability. The exclusive Double Adjuster is comprised of electroless nickel plated 4130 chromoly, along with 6061-T6 aluminum rotating clamps to reduce weight and prohibit corrosion, while offering quick and easy adjustment. Blue nodized titanium hardware shaves even more unsprung weight from the arms, without compromising strength. FK spherical bearings and rod ends are manufactured in Connecticut and utilize a PTFE liner to provide quiet operation, lower friction, smooth articulation, and eliminate bushing deflection under load. The liner is also self-lubricating and self-cleaning for robust reliability for street and track use. The PTFE liner is chemically bonded to the inner diameter of the race and offers a very high load-carrying capacity that has greatly increased dynamic wear characteristics. The operating temperature of the liner ranges from -65 to 325 degrees F. Order the pair designed to fit your vehicle.

Not Yet Reviewed

$1,889.00

Scorpion Endurance Series Shaft Mount Rocker Arm Kits

Scorpion Endurance Series shaft mount rocker arm kits strengthen your valvetrain for high performance! These "over-engineered" shaft mount rocker arms mean that you'll get the ultimate design and enduring qualities that have been track-tested and proven to "sting" your competition. Endurance Series kits are built to perform lap after lap and race after race with top materials, plus the latest cutting-edge manufacturing and finishing processes. Add stamina and energy to your high performance racing engine with lightweight Scorpion Endurance Series shaft mount rocker arm kits. Kits feature: * .562 in. centerless ground shaft * .520 in. centerless ground roller * Steel parts made from ASTM-certified bearing quality steel * 120 gram assembled body * .625 in. adjuster engagement * 4140 heat-treated steel stand * Fully radiused bodies made from 7000 Series aluminum * Needle bearing fulcrum and roller tip * Anodized for additional strength and protection * Black oxide coated steel parts * 100 percent CNC machined * Available in many ratios

5.0 out of 5 stars ( 1 )

$1,696.82

COMP Cams Shaft Mount Aluminum Rocker Arms

COMP Cams shaft mount aluminum rocker arms are one of the most cost-effective ways to increase horsepower. These shaft rockers were designed using the latest in computer software and engineering. They center the roller tip over the valve tip at the correct time so that the roller tip is never more than 0.020 in. off-center of the valve tip. At the greatest load point, the roller tip contact is on the center of the valve. At valve closing, the roller tip contact is slightly behind the valve centerline. When the valve is at full open, the tip contact is slightly behind the centerline of the valve. The results are more horsepower and better performance.

5.0 out of 5 stars ( 1 )

$1,583.95

—

$1,986.95

COMP Cams LS1 Gen III Aluminum Shaft Rockers

These COMP Cams LS1 Gen III aluminum shaft rockers are CNC-machined for accuracy and precision alignment. They feature pressurized internal oiling to ensure long life and reduced friction. These rockers require minor valve cover machining and deliver the adjustability needed by most performance modifications.

Not Yet Reviewed

$1,623.95

—

$1,705.95

Johnson's Hot Rod Shop Front Radius Rods

Johnson's Hot Rod Shop front radius rods feature modern, vintage-styled designs that take the age-old design of split wishbones to new heights. These radius arms fit OE and aftermarket Ford-style I-beam axles with a standard 2.25 in. perch boss. Manufactured from T6061 aluminum and available in machined or show-polished finishes, they measure 33.25 in. center-to-center with the correct caster angle built-in. Johnson's front radius rods are sold in kits and come complete with two radius rods, hardware, and frame tabs to attach to the frame rails. A variety of distinct styles are available, along with optional matching rear ladder bars (sold separately). All deliver superior strength and clean lines for your hotrod. For custom applications, please call to inquire about lengths and styles.

5.0 out of 5 stars ( 2 )

$1,695.00

—

$1,895.00

Tuxedo TC-950 Tire Changer Left Side Press Arms

Tuxedo TC-950 tire changer left side press arms simplify the changing of low profile and stiff sidewall tires. They are designed for use with TC-950 models and help limit damage to expensive wheels. Get your tire changers and components from a company known for their commercial-grade reliability and toughness when you order Tuxedo tire changer left side press arms for your tire changer needs.

Not Yet Reviewed

$1,709.99

Wise Guys Seats Bucket Back Bench Seat Frame and Foam with Center Arms

Wise Guys Seats bucket back bench seat frame and foam with center arms are purposely designed to fit into your vintage vehicle. They feature center 7.5 in. fold-out arms, two recliner release points, powdercoating for durability, and back Flexalator spring systems. Wise Guys Seats bucket back bench seat frame and foam with center arms provide your vehicle with a retro look, modern amenities, and comfort in the right spot! Features, items, and specs: * Two 12 V power receptacles * 16-gauge steel construction * Multiple density foam types * No-sag springs

Not Yet Reviewed

$1,654.99

Rough Country Long Arm N3 Suspension Lift Kits

Rough Country Long Arm N3 suspension lift kits are all-inclusive packages that allow you to gain the absolute best in off-road articulation, along with a host of impressive features that will get your rig ready to go where most wouldn't dare. For those who are serious about flexing, crawling, and pushing your Jeep to the limits, these kits feature upgraded forged steel adjustable track bars. Their beefy construction dwarfs stock equipment, and they are easy to install and fully adjustable on the vehicle. Rough Country's Long Arm N3 suspension lift kits also feature huge adjustable lower control arms, X-Flex joints, durable OEM-style rubber bushings, sway bar disconnects, and their large diameter N3 shocks. Together they create a robust suspension setup that doesn't just prevent binding and rear steer, it gives unparalleled axle flex while keeping pinion angles optimized, letting you negotiate trails on your terms. Features: * Extreme travel long arms keep optimum alignment and give optimum articulation * X-Flex control arm features: -- Durable OEM-style rubber bushings -- Flex joints feature a massive 2.5 in. diameter body and 1.25 in. thread -- Fully greasable -- Upper joints pivot up to 20 degrees -- Lower joints pivot up to 35 degrees * Premium N3 shocks: -- Fine-tuned 10-stage variable valving -- High-pressure Nitrogen charged -- Durable 18mm spring-loaded piston rod -- Faster-cooling 54mm shock body

Not Yet Reviewed

$1,999.95

Simpson Drag 6G SFI 20 Arm Restraint Jackets

The Simpson Drag 6G SFI 20 arm restraint jackets are made with signature knit Nomex, and feature stylish V-quilting, 270-degree arm gussets to lessen weight and restriction, built-in arm restraints, and embroidered DNA epaulets and logos. Style and performance-inspired, the 6G drag racing jackets look sharp and have an SFI 20 rating. As the preferred safety brand of championship race teams, you can count on Simpson Racing products and apparel for unparalleled performance and protection. Order the 6G SFI 20 arm restraint jacket in the size you need. Features of the Simpson 6G SFI 20 jackets: * Raschel Knit Nomex durable, lightweight, and flexible * Embroidered logos and designs * 270-degree arm gussets reduce bulkiness and increase ventilation and flexibility * Standard with built-in arm restraints * SFI Certification: SFI 3.2A/20

Not Yet Reviewed

$1,599.95

158 Results Found For "arms"