Free Shipping on Orders Over $109 at Summit Racing

On Sale

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.33 out of 5 stars ( 21 )

$1,799.95

—

$2,049.95

$1,618.95

—

$1,843.95

On Sale

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

3.58 out of 5 stars ( 24 )

$1,699.95

—

$1,949.95

$1,528.95

—

$1,753.95

On Sale

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.3 out of 5 stars ( 10 )

$1,999.95

—

$2,199.95

$1,798.95

—

$1,978.95

NOS Sportsman Fogger Nitrous Oxide Systems

NOS Sportsman Fogger nitrous oxide kits are intended for street/strip racers and are designed to deliver excellent distribution and atomization, along with easy power tuning. They do it by injecting precisely measured amounts of fuel and nitrous into each individual intake port via NOS' patented Fogger nozzles. Power levels are adjustable by changing the jets in each nozzle, and the latest in high-tech solenoids provide an extreme degree of reliability. Forged pistons are recommended for power increases in excess of 40 percent above stock horsepower. Kits include: * Nitrous bottle * Fogger nozzles * Powershot nitrous and fuel solenoids * Aircraft-quality stainless braided supply hose * Jets * Fittings * Tubing * Switches * Wiring * Installation hardware * Tap for threading the intake manifold for the nozzles

Not Yet Reviewed

$1,749.95

On Sale

Holley Sniper EFI BBD Master Kits

Holley Sniper EFI BBD master kits will be right at home on any powered trail rig or weekend cruiser. Not only does the Sniper EFI BBD offer superior throttle response and WOT power over the carburetor, but you can also gain timing control! Put an end to cold start issues, hesitations, vapor lock, and flooding—upgrade to Holley Sniper EFI. Features include: * Bolt-on BBD carburetor replacement * Engineered specifically for 1971-86 Jeep CJs with 258 cu. in. 6-cylinder engines * Throttle body-mounted ECU--no extra boxes to mount * Supports up to 350 hp with two 100 lbs./hr. injectors * Only four wiring connections required—Battery +, Battery -, Switched ignition, and rpm * Internal fuel pressure regulator eliminates the hassle of plumbing an external regulator * Includes complete fuel system: 20 ft. of 3/8 in. vapor guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard: answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust; ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and stainless steel (weldable) oxygen sensor flange * Available in Classic Gold, black, shiny polished

4.4 out of 5 stars ( 10 )

$1,699.95

$1,528.95

Snow Performance Stage 2.5 N54/N55 Direct Port Water/Methanol Injection Systems

Snow Performance Stage 2.5 N54/N55 direct port water-methanol injection systems are engineered specifically for BMW models with N54/N55 engines. These systems can increase your pump gas octane by 25 points and makes more power efficiently with a cooler running engine! The Snow Performance Stage 2.5 N54/N55 direct port systems come complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings, offering un-surpassed quality, reliability, performance and ease of the installation. In addition, Snow Performance direct port injection plates are the easiest, and the best-way to mount the water-meth nozzles on BMW N54/N55 engines. Simply fit between the head and intake manifold and enjoy the placement of six Hyper-Sonic nozzles right where you need it! Additional features and benefits include: * The Stage 2 uses a progressive VC-50 controller that proportionally injects more or less according to boost pressure * Start and full points are adjustable for engagement and delivery curve to match what the engine requires * Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol, and allows cooling and performance improvements over a wide range for improved drivability * The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller--all in one! * 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) LED screen displays boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes, allowing you to tailor the controller to match your OEM gauges or mix and match up to two colors Snow Performance N54/N55 direct port kit includes: * Direct Port Injection Plate * OEM O-ring gaskets to seal between injection plate and head * Required hardware for installation * Hardlines plumbed to distribution rail * Six No. 2 nozzles installed in plate * High-flow water methanol solenoids * N54/N55 engine specific boost tap * Everything needed for installation

Not Yet Reviewed

$1,503.90

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

5.0 out of 5 stars ( 2 )

$1,899.95

—

$2,149.95

$1,708.95

—

$1,933.95

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$1,999.95

—

$2,099.95

$1,798.95

—

$1,888.95

FiTech Ultimate LS EFI 500 HP Fuel Injection Systems

FiTech has some of the best-engineered and priced throttle body systems on the market. Their LS EFI 500HP fuel injection systems bring incredible ingenuity to the market. FiTech fabricated many aluminum parts for these systems, including the low-profile 92mm billet throttle body, high-volume billet fuel rails, and an intake manifold with 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mates 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touchscreen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. A suction cup mounting bracket puts the controllers at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. FiTech LS EFI 500HP fuel injection systems with transmission controller provide impressive power and performance, while allowing you to save a little green for your next tires. Additional features: * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touchscreen hand-held controller with data log features

3.21 out of 5 stars ( 42 )

$1,806.00

—

$1,997.99

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$1,999.95

—

$2,099.95

$1,798.95

—

$1,888.95

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$1,899.95

—

$2,149.95

$1,708.95

—

$1,933.95

On Sale

FiTech Retro LS TBI 650 HP System Inline Pump/Regulator Fuel Injection Master Kits

FiTech Retro LS TBI 650 hp system inline pump/regulator fuel injection master kits deliver old school looks and modern EFI performance for your hot rod. These kits feature a FiTech classic carburetor-gold throttle body with transmission control and a pre-terminated wiring harness with specific LS engine sensors, including the factory knock sensors to complement the built-in timing control. The remote ECU can control the transmission shift points and characteristics of the popular 4L60/65/80E transmissions. No laptop is required, and the system will work on 24x or 58x cam sensors. Also supplied with the Retro LS TBI is a handheld touch screen controller, cable and windshield mount, WBO2 sensor, bung kit, gaskets, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Retro LS master kits pair the TBI an in-line pump kit and Tight Fit regulator with gauge. The inline kit is supplied with a heavy-duty 255 lph external pump suitable for engine producing up to 600 hp, 40 ft. of high-pressure fuel hose, two fuel filters, fittings, mounts, and clamps. The Go Fuel Tight Fit regulator allows you to set the fuel pressure precisely where your EFI system and engine require. It can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum and features -6 ORB ports along with a vacuum/boost port.

Not Yet Reviewed

$2,166.99

$1,950.29

On Sale

FiTech Go Port EFI Standalone System Force Fuel/Go Spark Fuel Injection Master Kits

FiTech Go Port EFI standalone system Force Fuel/Go-Spark fuel injection master kits combine a high-flow (850 cfm) FiTech throttle body with an integrated ECU, plus a fuel delivery system that makes converting your carbureted engine to EFI easier and an upgrade to high-powered sparks for improved combustion and power output. The Go Port EFI standalone system supplies everything needed to adapt your intake and fuel rails--sensors, harness, gaskets, and a hand-held touch screen controller. FiTech Go Fuel Force Fuel system supports the demands of an 800 hp engine on gas. It is easy to mount, and a serviceable 10-micron fuel filter is supplied to ensure clean fuel reaches the injectors. The reservoir holds a 1/2 gallon of fuel to submerge an internal electric fuel pump, keeping it cool with no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance, and the Force Fuel system also includes 5 ft. of high-pressure fuel hose, fittings, return line fitting bung, and a liquid-filled gauge. Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire nonmagnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.

Not Yet Reviewed

$1,981.99

$1,783.79

On Sale

FiTech Go EFI 4 PA 600 HP System/Go Spark Fuel Injection Master Kits

FiTech Go EFI 4 PA 600 hp system/Go Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their Go EFI 4 Power Adder TBI with their Go-Spark CDI ignition and either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. The throttle bodies are available in different finishes. Choose the master kit with your preferred finish and fuel delivery solution. Go EFI 4 Power Adder system can support up 21.7lbs of boost right out of the box, as well as a single stage of wet nitrous. The air/fuel ratio is monitored and adjusted with FiTech's fast reacting self-learning technology, plus the ignition timing can be controlled based on boost or nitrous (including a retard feature). A touch screen handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info is included. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. *Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

Not Yet Reviewed

$1,706.99

—

$1,716.99

$1,536.29

—

$1,545.29

Nitrous Express VXL EFI Direct Port Nitrous Systems

Nitrous Express VXL EFI direct port nitrous systems utilize the latest technology and include the best components to maximize nitrous horsepower. These systems feature NX Lightning solenoids with improved flow paths, integrated purge ports, fuel bypass port, and CNC-machined aluminum bodies topped with carbon fiber cans for the ultimate in weight savings. NX VXL EFI systems include: * 8 of the NX VXL (extended length) nozzles * 2 NX Lightning Series nitrous solenoids * 2 NX Lightning Series fuel solenoids * Anodized aluminum distribution blocks * 3/16 in. stainless hard lines * Nickel plated fittings * Jetting for 200 to 500 hp * 6 AN nitrous feed lines * High-flow 6 AN Y-fitting * Wide-open throttle switch * 40 amp relays and relay harnesses * Master arming switch * Stainless bottle brackets and a 10 lb. nitrous bottle with NX Lightning bottle valve

Not Yet Reviewed

$1,656.13

On Sale

FiTech Go EFI Classic 650 HP System Inline Pump/Regulator/Go-Spark Fuel Injection Master Kits

If you prefer the restored or classic hot rod look, FiTech's Go EFI Classic Series should be your choice. You get the performance benefits of modern fuel injection, with the looks of a vintage carburetor--without the flooding, vapor lock, and cold start issues. And FiTech's master kits will also provide a fuel delivery option, allowing you to take your setup from carburetor to EFI all with one part number. FiTech Go EFI Classic 650 hp system inline pump/regulator/Go-Spark fuel injection master kits package a gold or black Classic throttle body with an inline pump kit, a Go Fuel Tight Fit regulator with gauge for precise fuel pressure, and a Go-Spark CDI ignition for high-powered sparks that improve combustion and power output. Choose your preferred finish. Go EFI Classic throttle body features FiTech's advanced self-tuning fuel metering technology and will support engines rated up to 650 hp. Thanks to the dual bolt pattern, the throttle body will easily bolt onto most intake manifolds and throttle linkages. The ECU of the Classic Series is compact and easy to mount out of sight to maintain a restored engine compartment, but you'll notice the fuel injection benefits every time you turn the key! The fuel delivery system is an inline fuel pump kit supplied with FiTech's heavy-duty 255 lph external fuel pump suitable to support engines producing up to 600 hp. The kit includes 40 ft. of high-pressure fuel hose, two billet fuel filters, fittings, mounts, and clamps. The Go Fuel single output regulator can be adjusted from 30 to 70 psi, will support up to 1,000 hp, and is crafted from billet aluminum with -6 ORB ports along with a vacuum/boost port and includes gauge. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.

Not Yet Reviewed

$1,721.99

$1,549.79

On Sale

FiTech Go EFI Classic 650 HP System In-Tank Pump/Regulator/Go-Spark Fuel Injection Master Kits

If you prefer the restored or classic hot rod look, FiTech's Go EFI Classic Series should be your choice. You get the performance benefits of modern fuel injection, with the looks of a vintage carburetor--without the flooding, vapor lock, and cold start issues. And FiTech's master kits will also provide a fuel delivery option, allowing you to take your setup from carburetor to EFI all with one part number. FiTech Go EFI Classic 650 hp system in-tank/regulator/Go-Spark fuel injection master kits package a gold or black Classic throttle body with an in-tank pump module, a Tight Fit regulator with gauge, and a Go-Spark CDI ignition for high-powered sparks that improve combustion and power output. Choose your preferred throttle body finish and fuel delivery system. Features: * Go EFI Classic throttle body features FiTech's advanced self-tuning fuel metering technology and will support engines rated up to 650 hp. Thanks to the dual bolt pattern, the throttle body will easily bolt onto most intake manifolds and throttle linkages. The ECU of the Classic Series is compact and easy to mount out of sight to maintain a restored engine compartment, but you'll notice the fuel injection benefits every time you turn the key! * Go Fuel Tight Fit single output regulator can be adjusted from 30 to 70 psi, will support up to 1,000 hp, and is crafted from billet aluminum with -6 ORB ports along with a vacuum/boost port and includes gauge. * Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Choose either a 255 lph or 340 lph in-tank pump module. Both pumps can be used on tanks with a depth of 6 to 15 in., and each has a billet top assembly designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Gaskets, terminals, and clamps are included.

Not Yet Reviewed

$1,671.99

$1,504.79

On Sale

FiTech Retro LS TBI 650 HP System In-Tank Pump/Regulator Fuel Injection Master Kits

FiTech Retro LS TBI 650 hp system in-tank/regulator fuel injection master kits deliver old school looks and modern EFI performance for your hot rod. These kits feature a FiTech classic carburetor-gold throttle body with transmission control and a pre-terminated wiring harness with specific LS engine sensors, including the factory knock sensors to complement the built-in timing control. The remote ECU can control the transmission shift points and characteristics of the popular 4L60/65/80E transmissions. No laptop is required, and the system will work on 24x or 58x cam sensors. Also supplied with the Retro LS TBI is a handheld touch screen controller, cable and windshield mount, WBO2 sensor, bung kit, gaskets, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Retro LS master kits pair the TBI with either a 255 or 340 lph Go Fuel in-tank pump and a Tight Fit regulator with gauge. Both can be used on tanks with a depth of 6 to 15 in and feature a billet top assembly designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Gaskets, terminals, and clamps are included. The Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. Made from billet aluminum, it features -6 ORB ports along with a vacuum/boost port. Choose your preferred fuel delivery system.

Not Yet Reviewed

$2,116.99

$1,905.29

On Sale

FiTech Go Port EFI Standalone System Go Fuel In-Tank Pump/Go-Spark Fuel Injection Master Kits

FiTech Go Port EFI standalone system Go Fuel in-tank pump/Go-Spark fuel injection master kits combine a high-flow (850 cfm) FiTech throttle body with an integrated ECU, plus a fuel delivery system that makes converting your carbureted engine to EFI easier and an upgrade to high-powered sparks for improved combustion and power output. The Go Port EFI standalone system supplies everything needed to adapt your intake and fuel rails--sensors, harness, gaskets, and a hand-held touch screen controller. FiTech Go Fuel in-tank pump module can be used on tanks with a depth of 6 in. to 15 in. The billet top assembly is designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly, and the vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Gaskets, terminals, and clamps are included. Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire nonmagnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.

Not Yet Reviewed

$1,757.99

$1,582.19

Eddie Marine Billet Aluminum Sport Trim Tabs

Eddie Marine billet aluminum Sport trim tabs are manufactured from 1/4 in. 6061 T-6 aluminum. These affordable alternatives feature extruded hinge assemblies, making them more attractive and durable than ordinary stamped stainless plate designs. Each trim tab initially receives a clear anodized finish for extra-corrosion resistance, followed by two coats of high-strength, long-lasting Fusioncoat available in an array of colors. Kits typically include: * Trim pump * Wiring harness * External braided stainless steel/PTFE lines * Necessary internal plastic lines * Brass fittings * Stainless steel bulkhead fittings

Not Yet Reviewed

$1,741.95

PSC Hydraulic Assist Steering Systems

Oversize tires, lockers, and rocks will quickly have your stock steering system whining for help. Increase turning force by an average of 50 percent with PSC hydraulic assist steering systems. They feature a new hydraulic-assist steering cylinder with all required mounting brackets, hoses, and fittings. Their new steering gear boxes have been modified for cylinder assist. The valving remains stock to allow OEM handling, control, road feel, and no oversteer. PSC hydraulic assist steering systems turn taller tires like they're stock.

4.33 out of 5 stars ( 12 )

$1,920.00

On Sale

FiTech Go EFI 8 PA 1200 HP System Dual Pump/HP Regulator Fuel Injection Master Kits

When you are getting serious about 4-digit horsepower under your hood with boost or nitrous, Go EFI 8 Power Adder 1,200 hp systems are up to the task. And, with FiTech's master kits you also get a high-pressure fuel delivery solution to take your setup from conventional to EFI. FiTech Go EFI 8 PA 1,200 hp system Dual Pump/HP regulator fuel injection master kits pair two powerful components designed to support serious horsepower, plus precise fuel pressure. Go EFI 8 Power Adder bolt-on throttle body features eight high-flow injectors capable of fueling up to 1,200 hp. It is supplied with FiTech's Pro-tuning software and features the ability to data-log information. To ensure the best atomization of the fuel injection, the annular discharge design is increased to 20 jet streams to support the fuel volume required under boost, and has a built-in 2.5 BAR MAP sensor to handle the increased boost pressures, along with built-in timing controls based on boost or a nitrous input. The throttle body system includes handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info. Go Fuel dual fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. Go Fuel High Horsepower regulator will support 2,000 hp. Adjustable from 30 to 70 psi, this larger, dual output model is crafted from billet aluminum and features -6 ORB ports along with a vacuum/boost port. It will accept a gauge

Not Yet Reviewed

$2,184.99

$1,966.49

On Sale

FiTech Go EFI 2x4 625 HP System Fuel Injection Master Kits

FiTech Go EFI 2x4 625 hp system fuel injection master kits are inclusive EFI kits with fuel delivery solutions. In these master kits, FiTech mates their 2x4 TBIs with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. The throttle bodies are offered in two finishes. Choose the master kit with your preferred finish and fuel delivery solution. Go EFI 2x4 625 hp system lets everyone know you mean business with a pair of 4-barrels crowned atop your engine! The 2x4 is supplied with two throttle bodies, one with the brains and integral ECU, the other with the brawn. Both bodies feature four injectors and will support up to 625 hp (naturally aspirated). The system is supplied with two throttle bodies, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. * Fuel cell pump modules are offered in two models—single or dual pump. Each style features a billet machined top assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

4.0 out of 5 stars ( 4 )

$2,051.99

$1,846.79

On Sale

Summit Bucks

Mishimoto Performance Radiators

Mishimoto performance radiators are designed and engineered to maximize cooling efficiency, boost engine functions, and, most of all, protect your engine from overheating. Many stock radiators can't handle the additional heat that comes higher horsepower levels. So, swap out your stock radiator for an all-aluminum Mishimoto. Key features and benefits of Mishimoto performance radiators include: * Available for universal and exact fit applications (no cutting or modifications required) * All-aluminum construction for optimal heat dissipation, improved strength, and reliability * Increased cooling capacity due to their massive core size * 100 percent brazed aluminum core for minimal distortion, low stress, and clean joints * Available in various sizes with 2-row or 3-row cores * TIG-welded for clean, strong welds and increased durability * Magnetic drain plugs capture metallic debris or fragments * Included high-pressure 1.3 bar cap raises the coolant boiling point for greater safety and efficiency * Automatic transmission and accessory coolers included where applicable

4.41 out of 5 stars ( 336 )

$1,671.95

28 Results Found For "an 6 fittings"