Availability
Showing In Stock Items. Show All 763 Items.
Dinan high-flow air intake systems consist of an injection-molded replacement lid for the stock air box—designed to increase overall volume and accommodate a high-flow filter element for optimum intake airflow. The lid is manufactured using a special composite material, specifically chosen for its ability to resist power-robbing underhood heat. The lid also incorporates an O-ring, completely sealing the air box for maximum pressurization and further insulation against heat-soaking—optimizing performance under varying driving conditions. They also include a secondary intake duct that scoops up additional cool, oxygen-rich air via the factory brake cooling duct, further improving performance as road speed increases.
Not Yet Reviewed
$1,749.95
Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.
( 4 )
$1,649.95
Just need the insides? Vintage Air SureFit evaporator kits are essentially all the air conditioning system components and accessories needed for inside your vehicle. In your kit you may receive (depending on the kit) evaporator and bracket, louvers (when required), duct hose, wiring harness, new controls or cable converters, hardware, and installation manual. So, when you don't need a "complete" SureFit kit choose evaporator kits from Vintage Air.
Not Yet Reviewed
$1,682.99
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 16 )
$1,682.99
—
$1,920.99
RideTech RidePro E5 Air Ride Suspension leveling control systems adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, RidePro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, RidePro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the RidePro E5 app. Whether you are driving alone to work or on your way to a show with a car or truck load of friends, RidePro E5 will calculate proper air spring rate and balance, then work diligently in the background to maintain proper spring pressures and vehicle height. RideTech RidePro E5 leveling systems feature: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Includes ECU, control panel, air pressure sensors, wiring harnesses, and instructions
Not Yet Reviewed
$1,555.00
The Gen-V is Vintage Air's most powerful and intelligent climate control system. It uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate- and fin-cooling coils provide outstanding performance and instant temperature adjustments. The Gen-V Super Magnum SureFit system evaporator kit includes the evaporator unit with Magnum blower and mounting brackets, louvers (where required), duct hose wiring harness, new bolt-in replacement control panel, hardware, and installation instructions. Additional details: * Also includes variable blower speed and dash/floor/defrost blend * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower * This kit fits 1982-88 Oldsmobile Cutlass models with factory air
Not Yet Reviewed
$1,708.99
Air Lift engineers asked themselves: what would the ultimate air suspension be like? How would it combine an easy-to-use, reliable, and feature-rich system with powerful technology and beautiful design? Air Lift Performance 3P air management system is the result of three years of development and testing. It is the most advanced product Air Lift has ever created. The 3P combines pressure-based control with the ability to add ride-height sensing technology with the upgrade to height sensors. While both types of air management have been utilized before, this is the first product to harness the benefits of both systems—instantly improving suspension control, performance, and vehicle ride flexibility. (See notes on Model 27780 below) Kits include: * 3H/3P digital controller * Integrated ECU + manifold * Advanced electrical wiring harness * 60 ft. of 1/4 in. air line * Inline water filter * All wiring, fuses, hardware, etc. required for installation Model 27780 has additional features: In an effort to make the 3P air management systems more customizable to builders across the globe, Air Lift has introduced a threaded-port manifold. With the option of threaded FNPT ports, builders can create trunk-setups so stunning that they rival their vehicles' stance. This manifold allows builders to choose the fitting and air line option that best fits their needs and aesthetic. The threaded ports on the new manifold make integrating straight or elbow hard lines and/or threaded-steel braided air lines easier and safer, with less chance of damage to the internal O-rings. The threaded-port manifold is built with the same advanced technology as the push-to-connect 3H and 3P systems—high-grade, fully integrated components, a 32-bit processor for precise 4-corner control, built-in Bluetooth, and an intelligent accelerometer for accurate adjustments. With limitless mounting options and a simple, single harness connection, the manifold can be easily installed to the builder's exact specifications.
Not Yet Reviewed
$1,758.99
Vintage Air Gen-V Magnum Max SureFit Systems evaporator kits offer powerful and intelligent climate control. The Gen 5 uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Each evaporator kit includes the evaporator unit with Magnum Max blower and mounting brackets, louvers (where required), duct hose, wiring harness, bolt-in replacement control panel, hardware, and installation instructions. Select the Vintage Air Gen-V Magnum Max SureFit system designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower
Not Yet Reviewed
$1,708.99
Scott Drake OE-style air conditioning kits are complete packages which include the underdash unit, drain tube, mounting brackets, compressor, all necessary hoses, the receiver/dryer and condenser. These kits perform better than the original ever did—and require less horsepower to operate!
Not Yet Reviewed
$1,599.95
Lower your ride, improve your handling, and get control over your suspension with these Air Lift air management systems. They are the most versatile choice for suspension on today's market. Go from the strip to the street to the show floor with the push of a button. Air Lift's air strut kits are designed to give you maximum performance with their 9-way adjustable dampening system previously found only on high-end coilovers. Do you want to adjust your spring rate as well? No coilover will ever offer this option! Adjust your spring rate with the flip of a switch. When style matters just as much as performance, Air Lift's air struts won't let you down. Wheel gap never helped anyone win a car show! Tuck those rims up where they're supposed to be. These kits will set you on the ground and let you clear speed bumps and get in and out of driveways without scraping your ride--not to mention offering you the remarkably smooth ride that air provides.
Not Yet Reviewed
$1,826.99
March Performance Pro-Track billet air cleaners complete the professional show-quality style under your hood. With unique design and a choice of fabulous finishes, these air cleaners raise the bar on quality and style. What's the first thing everyone sees when you pop your hood? An expertly crafted and matched engine bay, thanks to March Pro-Track billet air cleaners.
Not Yet Reviewed
$1,622.99
The Firestone 2626 Air Command Kit with app will allow you to remotely fill your Firestone Ride-Rite or RED Label air bag helper springs. Each kit features a Bluetooth controller that's operated by phone via an app and will automatically update the firmwear. A heavy-duty compressor is included, as well as 1/4 in. air line, fittings, and installation hardware. Product features: * Bluetooth enabled * Built-in self-diagnostics * "Mount anywhere" on-board vehicle air compressor * Manual inflation option available * Automatic ECU firmware updates * Two wire hook-up for easier installation * Compatible with most air spring kits with 1/4 in. air line * Monitors components and voltage to ensure proper wiring * Easily adjust air pressure up to 150 psi with convenient app * Use with the 5,000 lbs. Ride-Rite kits and the 7,500 lbs. RED Label kits
( 1 )
$1,543.50
—
$1,736.44
Campbell Hausfeld single stage, 2-cylinder air compressors are designed to save space while providing lots of stored energy. They feature a cast iron, twin cylinder, oil-lubricated pump for long life and quiet operation.
( 1 )
$1,629.99
Bilstein OE replacement air springs are designed to replace worn original suspension components. Over the years, air springs can begin to leak, and when they do they will no longer be able to hold the air pressure required to keep the vehicle riding smoothly and at a level ride height. Each Bilstein OE replacement air spring is designed to connect directly into the original connectors on your vehicle, ensuring modification-free installation and restoration of the original feel of the vehicle. Features include: * OEM-quality standards * Proven Bilstein gas pressure technology on springs with integral shocks/struts * Responds to street and vehicle conditions in milliseconds for instant adaptivity * Provides excellent comfort and perfect driving characteristics * Axial bellows provide sensitive spring behavior with a comparably low rolling radius--ensures optimum functionality even in confined working chambers
Not Yet Reviewed
$1,769.00
Don't lose your cool! Scott Drake Hurricane air conditioning kits are complete conversion packages with upgraded electronic controls. They will not fit generator-equipped cars. These kits contain everything you need to install these units in your vintage car. Scott Drake is a trusted manufacturer of quality aftermarket parts.
( 2 )
$1,949.95
Campbell Hausfeld cast iron air compressors power a variety of air tools for the serious do-it-yourselfer, professional, or contractor. They have a product life of up to 5,000 hours and a durable and safe ASME code tank for greater storage.
( 12 )
$1,661.99
Four Seasons air conditioning compressors are made using state-of-the-art technology and quality assurance processes. Their compressors are carefully assembled and then undergo a battery of stringent quality tests, including noise, function, leak, and pressure testing. You can feel confident that you're purchasing a high-quality product from Four Seasons.
( 164 )
$1,799.99
—
$1,889.99
RideTech RidePro Analog compressor systems use a 5-gallon compressor leveling system with 1/4 inch air valve, manual 4 way switches, and gauges. This 5-gallon tank and dual compressor design is recommended for vehicles 3500 pounds or more. This system includes a separate aluminum 5-gallon tank, RidePRO air valve block, 1/4 inch air lines, fittings, and wiring. Control your air ride equipped vehicle height with this affordable air suspension leveling system. RidePro analog compressor systems utilizes a high-quality solenoid air valve system, manual switches, analog gauges, and dependable electric components to provide simple and reliable air suspension leveling control.
Not Yet Reviewed
$1,620.00
These CoolRide systems have the greatest application coverage and versatility of all of RideTech's systems. They will raise and lower the vehicle, improve the handling, and offer a terrific ride. On a front system, the shock is usually relocated to the outboard side of the lower control arm. A weld-on bracket mounts the top of the shock to the frame rail. On a rear system, the air spring and shock absorber will normally go in the stock locations. These CoolRide systems consist of an air spring, a shock absorber, and all of the necessary mounting bracketry and hardware.
( 2 )
$1,850.00
Vintage Air offers their totally cool Front Runner engine drive systems for your small block Ford! With a unique design focused on performance, Vintage Air Ford systems are strong, compact, and extremely good looking. They feature a patented, one-piece, forged aluminum timing cover with integral accessory mounts and utilize a spring-loaded tensioning system for no-nonsense, trouble-free operation. Systems are available for power steering with or without pump and non-power steering applications in your choice of bright or black hard coat finishes. Vintage Air Ford Front Runner engine drive systems may include: * ARP stainless 12-point bolt and hardware * 170 amp alternator * Dayco OEM tensioner * Timing cover gasket set * Dayco serpentine drive belt * Power steering pump * 4-bolt crankshaft pulley * High performance water pump * Water pump pulley * Power steering pump pulley
( 11 )
$1,639.99
Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the popular EndraShine finish.
( 7 )
$1,865.95
—
$1,952.95
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$1,895.62
Arnott new Eibach shocks and struts feature a premium Eibach monotube shock absorber and custom air spring designed to improve ride comfort and handling. The Arnott strut is built with Tier 1 components, including a crosshatch, multi-ply ContiTech air sleeve protected by an aluminum can and dust cover. These new air struts are designed and assembled with a formed steel top mount, O-rings, polyurethane bump stop, heavy-duty crimping rings, a new air line fitting, and check valve. They are backed by Arnott's industry leading warranty.
( 7 )
$1,612.52
—
$1,854.20
Arnott new OE air shocks and struts are available for most air ride-equipped vehicles. As their title suggests, these are not rebuilt—they're new models with OE-quality and fit, but without the premium OE price. Arnott makes use of name brand, high-quality components for longer life, and they offer faster installations with detailed manuals and videos—plus they're backed by a limited lifetime warranty. From import cars to domestic SUVs and everything between, there's an Arnott aftermarket air shock or strut to precisely match your air ride system application. Order the shocks or struts that match your make and model (Arnott highly recommends replacing them in pairs).
( 29 )
$1,696.39
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
