Free Shipping on Orders Over $109 at Summit Racing

Nitrous Outlet Flare Jet Packs

If you're big into performance, we can't stress enough the major importance of jetting your nitrous system. Many racers casually assume that a jet is a jet--that all are created equally. However, Nitrous Outlet suggests that precision manufacturing and the jet design can make a huge difference in performance. These flare jet packs are the most common type. They're offered in many configurations to accommodate virtually every nitrous system; plus, each jet is stamped with the orifice size for easy identification and selection. To meet your power and tuning needs, use Nitrous Outlet jets!

5.0 out of 5 stars ( 2 )

$1,590.99

Ford Performance Parts Super Cobra Jet Cylinder Heads

Ford Performance Parts teamed up with Jon Kaase to redesign their 429 Cobra Jet cylinder heads, and the results are these Super Cobra Jet heads. They feature revised valve angles and locations to reduce cylinder wall shrouding and improve flow, along with redesigned combustion chambers to accommodate the more centrally located valves. These heads use the same valves, valve springs, retainers, and 7/16 in. stud-mounted roller rockers as the current Ford Performance Parts 429 Cobra Jet heads, and the standard Cobra Jet intake and exhaust manifolds bolt right on. This new design offers a 25-50 HP increase over current Cobra Jet heads, depending upon displacement and camshaft.

4.62 out of 5 stars ( 13 )

$1,772.99

JET Cyclone Dust Collectors

JET Cyclone dust collectors deliver the efficiency you want and need for your shop. Dust particles may not always be initially visible, but as you sand and cut, they settle across your machinery. JET Cyclone dust collectors are available in several models that include direct mount filters, radio frequency remote controls, and large collection bins to take your shop's capabilities to a new level. They are also fitted with swivel casters, making it easy to move units around the shop. For a work area that is safe, clean, and efficient, choose the JET Cyclone match for your shop's needs. Features and benefits: * 2-stage separation provides more working CFM than comparable horsepower single-stage units * Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction * Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends * Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below * Heavy debris is captured in a drum with quick-release levers and independent casters for quick emptying * Included radio frequency remote control works from up to 50 feet away * Double paddle manual cleaning system quickly cleans the pleated filter * Remote timer settings allow system to run for 2, 4, 6, or 8 hours before automatic shutoff (not on all models)

Not Yet Reviewed

$1,869.00

JET IAFS-1700 Industrial Air Filtration Systems

The IAFS-1700 Industrial Air Filtration Systems by JET is all about one thing—workshop safety. Metalworking specific air filters attract oil mist, smoke and dust generated during the metal processing, which could affect the health of the machinist. JET's IAFS-1700 Industrial Air Filtration Systems offer significant benefits like improved air quality by capturing 99 percent of oil mist, smoke, and dust in metalworking shops, protecting workers from harmful airborne particles, and reducing respiratory issues. Key features include: * Constructed of metal for years of use * Helps to extended the service life of the air conditioning equipment in the shop * Filters dust, smoke and oil mist in a closed or air-conditioned workshop * Fully enclosed ball bearing motor with overload protection for long, dependable service * Adjustable Exhaust directs the air where you want it for optimal circulation * Pleated fiber air filter is 99 percent effective with filtering fumes, oil mist, and water vapor based on 8-to-10-micron size particles in the air * Two-Filter System with air diffuser disperses outgoing air into a broader pattern * Optional charcoal filters help eliminate odors

Not Yet Reviewed

$1,595.99

JET Combination Belt and Disc Sanders

Jet combination belt and disc sanders offer plenty of workshop versatility. A quick-release belt tension lever makes belt changes easy, while a quick-lock dust cover allows fast disc changes. These combo sanders are available in a variety of configurations and foundation supports—from portable benchtop models, to open or closed stand bases.

Not Yet Reviewed

$1,979.00

JET Drill Presses

JET drill presses are manufactured with the weight and rigidity to maintain the tight tolerances required of metalworking applications and to provide a solid base for drilling. They feature a rugged cast iron design with ground-steel columns and an adjustable depth stop for drilling accuracy in metal, wood, and plastic. The head casting on these units includes a ball bearing spindle assembly, supported by four permanently lubricated, heavy-duty ball bearings that are mounted in an enclosed quill for extended life. Additional perks include a 45 degree table tilt, hinged metal belt, and pulley cover. They're ideal for use in maintenance shops and for industrial applications. Select the model that best suits your workshop needs.

Not Yet Reviewed

$1,649.00

FAST XFI 2.0/XIM Super Cobra Jet Engine Harnesses

FAST XFI 2.0/XIM Super Cobra jet engine wiring harnesses are designed to integrate with the factory vehicle harness, switch panel, and other components of Cobra Jet engines. It's the same system used by top NHRA and NMCA Stock Eliminator and Super Stock racers such as Anthony Bongiovanni, Gary Richard, Jeff Roell, P.B. Candies, Randy Eakins, Roy Hill, Don Bowles, Susan McClenaghan and Chuck Watson. The wiring harness offers several mounting options for the ECU and ignition module. It also features heavy-duty heat and abrasion-resistant sheathing with heat-shrink-sealed ends on the underhood portion. There's double EMI shielding on critical harness leads, plus durable braided nylon sheathing on the under-dash portion of the harness. It's compatible with Ford 5.4 Modular and 5.0 Coyote engines, either naturally aspirated or supercharged. Each harness includes a detailed vehicle-specific installation guide for integrating the engine harness to the factory switch panel, factory Launch Control/2-Step function, and factory gauges. This allows for simple data-logging of factory-installed sensors like fuel pressure, oil pressure, and brake pressure into the XFI 2.0 ECU. No cutting or trimming is required if the FAST XFI 2.0/XIM Super Cobra jet engine harness is installed as directed. This saves 30-40 hours building labor and results in a neat, factory-appearing installation. Every harness is also 100 percent tested to ensure optimum performance.

Not Yet Reviewed

$1,528.95

Nitrous Express Billet Crossbar Nitrous Plate Systems

Never be satisfied with the status quo! It is time for the next generation in crossbar nitrous plate technology. The CNC machined design eliminates round spray bars resulting in excellent atomization and cylinder distribution without rotation, sagging, or the disruption of airflow. These CNC-machined plates include a nitrous bottle with a custom solenoid. The Lightning Series solenoids feature CNC aluminum bodies with an integrated purge port, which allows for connecting a purge valve directly to the body of the nitrous solenoid, for less plumbing and clean looks. The kits also come with fittings, lines, switches, relays, and every nut, bolt, and electrical connector needed for installation.

5.0 out of 5 stars ( 4 )

$1,569.05

—

$1,692.85

Holley Sniper EFI Quadrajet Self-Tuning Fuel Injection Systems

Holley Sniper EFI Quadrajet self-tuning fuel injection systems are ideal replacements when you're tired of rebuilding the 50-plus-year-old Rochester Quadrajet (Q-jet) on your classic ride. They're the first bolt-on, spread-bore, EFI throttle-body systems not requiring any additional adapters, sealing plates, or intake manifold swaps. They retain the same great features as the 4150 Sniper EFI version (four 100 lbs.-hr. injectors; built-in timing control; high resolution 3.5 in. full color touchscreen; etc.). Their throttle body will support naturally aspirated power up to 500 hp. In addition, they offer multiple fuel inlet configurations that allow for a stock-appearing installation and fit most stock air cleaners. Modernize your Q-jet-powered classic vehicle with a Holley Sniper EFI Quadrajet self-tuning fuel injection system. They are offered individually or in Master kits with external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank. Features, items, and specs: * Designed to deliver the signature "Rochester Roar" at wide-open throttle! * Throttle body-mounted ECU–no extra boxes to mount * Only 4 wiring connections required (battery positive and negative, switched ignition, and rpm) * Transmission provisions on throttle lever for TH350/TH400 and 200R4/700R4 * Universal throttle and transmission kick-down bracket * Brake booster adapter (if required) * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required) * Internal fuel pressure regulator preset to 58.5 psi * 20 ft. of 3/8 in. Vapor Guard fuel hose * Fuel pump and filters * Necessary hardware and bulkhead fitting to return fuel to the tank * Genuine Bosch LSU 4.9 wide-band oxygen sensor provides real-time fuel map learning * OEM-style throttle position sensor (TPS) and idle air control (IAC) for years of dependable service * Clamp-on oxygen sensor kit ensures leak-free oxygen sensor installation with stainless steel T-bolt clamps and weld-ready oxygen sensor flange * United States Coast Guard approved (certified to ISO 8846, SAE J1171 requirements) * Available in three finishes--Classic Gold, Shiny, and Black Ceramic

3.0 out of 5 stars ( 7 )

$1,699.95

—

$1,999.95

Holley Gen 3 Ultra Dominator Carburetors

Holley Gen 3 Ultra Dominator carburetors feature a brand new main body, brand new state-of-the-art calibrations, high-volume HP fuel bowls, and sizes up to 1,475 cfm! The metering blocks are fully adjustable (emulsion bleeds, power valve channel restrictors, and idle feed restrictors). These carburetors include redesigned Holley HP fuel bowls for racing. Internal baffling helps to control fuel slosh and minimize float level fluctuations in hard launching or cornering situations. The HP fuel bowls also have material added in key areas (the needle and seat, fuel inlet, and sight window areas) for added strength in demanding race environments and can be plumbed from either side. Some of the many Holley Gen 3 Ultra Dominator carb features include: * Main body 5/16 in. taller than the previous generation * Designed for larger radius air entries optimized using computational fluid dynamics (CFD) software to deliver smoother flow into fully machined, big-bore Venturi * Improved 6061-T6 billet aluminum metering blocks offering improved durability, true gasket sealing (sealing surface integrity), and brightly dipped anodizing for good looks and corrosion protection * Power valve channel restrictors are now machined lower in the metering blocks for improved fuel delivery to the power valve circuit * Accelerator pump channel internally drilled, eliminating the need for an external plug, * Excess material removed for increased fuel capacity * Snap-in-place bowl vent whistle makes removal and/or replacement easier * 20 percent more fuel capacity vs. traditional V-bowl, eliminating fuel starvation and providing consistent air/fuel ratios * Fuel shelf is positioned below the needle and seat to minimize fuel aeration and promote more consistent metering * Fuel trough designed into the floor of the bowl to route fuel flow directly to the jets and assist in keeping them covered by fuel * Clear sight windows on both sides of the bowls for easy and safe fuel level adjustments * Built-in drain plug in the front center of the bowl provides easy access to empty the bowl (contoured entry provides smooth fuel flow directly to the needle and seat) * Designed for use on drag race, Pro Street, or any high-horsepower engines * All-aluminum construction saves 3.8 lbs. over original models (28 percent weight savings) * Dual 50cc accelerator pumps

4.45 out of 5 stars ( 20 )

$1,549.95

—

$1,999.95

Nitrous Express Hemi Plate Conversion Kits

Nitrous Express offers a complete line of conversion kits for all of their systems, including these Hemi plate conversion kits. They're designed to fit Hemi throttle bodies, including Challenger, Chrysler 300 Dodge Rams and Chargers with the 5.7L-6.4L Hemi engines. The plate bolts between the throttle body and intake or intake and heads, making installation quick, easy, and attractive. These kits include the aluminum conversion plate, longer throttle body bolts, braided stainless nitrous and fuel lines, as well as jetting for 50, 100, 150, 200, 250, 300, 350, and 400 hp. The system includes: * Jetting for 50-400 hp * 24 in. S.H.O. nitrous line * Rubber O-ring gasket * Dual stage capable throttle body nitrous plate (Plate is pre-machined with a second set of nitrous and fuel passages, so you can easily upgrade to a dual stage system by adding part number NX933D.)

Not Yet Reviewed

$1,526.47

—

$1,769.40

Stromberg BIG97 Carburetors

Stromberg BIG97 carburetors feature 55 percent increased airflow to put out a whopping 250 cfm! They have the same standard 97 outside shape, but use enlarged 1.175 in. venturi with a super-efficient 20 degree entry angle. The accelerator pump discharge jets are smaller, and flared exit cones build power by slowing down the mixture to reduce turbulence into the manifold plenum. The result is 250 cfm. Stromberg BIG97 Tri-Power carburetors feature: * Signature 97 outside shape and styling * Cast iron base * Reinforced airhorn * Early plenum effect: allows all cylinders to draw from both barrels, giving you dual-plane drivability with a single-plane style top-end horsepower * New power valve circuits improve fuel conditioning: feeds top-end enrichment directly into the emulsion tubes * Ported distributor vacuum: switch in the brass plug (included) and connect your distributor to improve combustion efficiency in cruising mode; you'll run smoother and cooler, with more torque and better fuel mileage * Big S-jet twin-ball inlet valve: accepts 5/16 in. hard line and standard Stromberg fuel fittings * Four finishes available: original equipment style, chrome, chrome/black, or barn find (patina)

5.0 out of 5 stars ( 3 )

$1,715.00

Nitrous Outlet Stinger Plate Nitrous Oxide Systems

Nitrous Outlet Stinger Plate nitrous oxide systems feature a second generation Stinger plate designed to work with either 4150 or 4500 flanged carbureted-style intake manifolds. The new billet aluminum Stinger plate has a larger conical cone than the previous version and is based off of the same technology as the Nitrous Outlet Nitrous Puck, enabling them to delivering up to 600 hp with proper jetting. The plate features 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet Stinger Plate nitrous oxide systems include nitrous and fuel solenoids, solenoid brackets, a main feed line, relay, harness, jetting, hardware, and wiring.

Not Yet Reviewed

$1,503.99

—

$1,655.99

NOS Pro Shot Fogger Nitrous Oxide Systems

NOS Pro Shot Fogger nitrous oxide systems offers six-second technology for all-out racing. They're designed for high performance race cars, and offer superior atomization and tuning—by injecting precisely measured amounts of fuel and nitrous into each individual intake port. Power levels are adjustable from 150 to 500 hp or more by changing the jets in each Fogger 2 nozzle; plus, the latest in high-tech solenoids provide an extreme degree of reliability. These kits include the famous Fogger 2 nozzles, Super Pro Shot nitrous and Cheater fuel solenoids, aircraft-quality stainless-braided hose, jets, fittings, tubing, switches, installation hardware, and a tap for threading the intake manifold for the nozzles. Models are available with or without nitrous bottle and mounting brackets. Racing fuel, racing ignition system with timing control, and internal engine modifications are required.

5.0 out of 5 stars ( 5 )

$1,549.95

—

$1,749.95

Nitrous Express Shark Nozzle Nitrous Systems

If you're looking for a nitrous system, you obviously want a lot more power. So, how much more do you want--200 hp? 300? 400? 500? 600? No matter how much it is, Nitrous Express Shark nozzle systems can deliver it. Built around NX's high-flowing "Shark" nozzles, they are tunable to deliver power boosts in those specific increments--and you get to pick whichever one you want. Race fuel is required. Systems include: * Fuel and nitrous distribution blocks or rails * Nozzles * Supply hoses and lines * Fittings * Switches * Solenoids * Wiring * Jets * Mounting hardware

Not Yet Reviewed

$1,531.75

—

$1,970.34

Nitrous Outlet Nitrous Oxide Plate Systems

Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp

4.0 out of 5 stars ( 3 )

$1,513.99

—

$1,976.99

Nitrous Outlet 4150 GENIII Stinger Nitrous Oxide Plate Systems

Nitrous Outlet 4150 GENIII Stinger nitrous oxide plate systems come out of the box with everything you need to spray up to 500 hp! Nitrous Outlet is proud to introduce their 3rd generation Stinger plate systems. They feature a revolutionary extended-reach cone that sits further down inside the intake plane to prevent nitrous from hitting the sidewalls on intakes with a high plane or spacer plate. Each stinger has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4150 GENIII Stinger nitrous oxide plate systems include everything you need to spray 50-500 hp. Overview: * Max-flow 500 hp anodized billet aluminum stinger plate * Single entry * 4150 flange * 360 degree discharge pattern * Gasket, jetting, and hardware included * E85 compatible with different jetting * Jetting included for 50-500 hp

Not Yet Reviewed

$1,504.99

—

$1,760.99

Tuxedo M-1000C Motorcycle Lifts

Tuxedo M-1000C motorcycle lifts are ideal for working on motorcycles, snowmobiles, ATVs, jet skis, and more. These air-powered lifts are capable of lifting up to 1,000 lbs. They feature a 30 in. working height and extra-large platform for keeping everything within reach while you work. Plus, you can choose from a range of accessories to customize the table to your preferences. Get your vehicle lifts from a company known for their commercial-grade reliability and toughness by ordering Tuxedo M-1000C motorcycle lifts. More product features include: * Choice of sliver powdercoated (M-1000C) or black powdercoated (M-1000C-BLK) finish * Minimum height – 7 in. * Overall length with ramp - 108 in. * Overall width with side extensions (sold separately) – 47 in. * Available accessories include side extensions, a motorcycle vice, a front extension, and a mini jack

Not Yet Reviewed

$1,676.99

—

$1,831.99

NOS Pro Two-Stage Nitrous Oxide Systems

Losing traction on the starting line because you get too big of a shot of nitrous will ruin an otherwise good run. You can deal with that problem and still get a giant power boost of up to 500 hp. NOS Pro Two-Stage nitrous oxide systems deliver a moderate shot of juice at the line for a solid start. Then, with the tires properly hooked up, a second shot gives you serious muscle through mid-track and on into the top end. These systems are fully tunable just by re-jetting. Racing fuel, a racing ignition system with timing control, and internal engine modifications are required. Several options are available to best suit your application. Kits come complete with: * Bottle and mounting brackets * Injector plate * Jets * Solenoids * Switches * Wiring * Stainless steel braided supply lines * Fittings * Mounting hardware * Also available without the bottle

5.0 out of 5 stars ( 1 )

$1,599.95

—

$1,699.95

NOS Dual-Stage Big Shot Nitrous Oxide Systems

Often times, the application of too much nitrous at the starting line can ruin a good launch. NOS Dual-Stage Big Shot nitrous systems are designed with this in mind. They inject nitrous oxide into your engine in two stages. The first stage allows you to leave the line with a moderate nitrous boost of up to 200 hp. Then, with the tires fully hooked up, the second stage is activated for a power boost of up to 400 hp! The first stage is turned on by a throttle-activated micro-switch, while the second stage is activated with a push-button switch. Systems include two Cheater solenoids for the first stage, one Super Pro Shot and one Cheater nitrous solenoid for the second stage. They come with or without bottle, plus a 1/2 in. injector plate, filters, fittings, a variety of power jets, switches, aircraft-quality stainless-steel braided hose, and all other necessary hardware for a complete installation.

Not Yet Reviewed

$1,749.95

—

$1,899.95

Nitrous Outlet 4500 Hornet Dual-Entry Plate Conversion Kits

Nitrous Outlet 4500 dual entry Hornet plate conversion kits come right out of the box with everything you need to replace your old plate and are capable of spraying 800 hp. The Hornet is designed with the same great technology as the Stinger, with a larger conical cone and dual entry. Each Hornet has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4500 dual entry Hornet plate conversion kits are CNC-machined from 6061 billet aluminum, have a black anodized body, red anodized stinger, and are CNC-engraved with the Nitrous Outlet logo. Overview: * 700 hp max flow * Dual entry * 4500 flange * 360 degree discharge pattern * Anodized billet aluminum plate * Gasket, jetting, and hardware included * Jetting included for 100-700 hp

Not Yet Reviewed

$1,563.99

Nitrous Outlet EFI Dual Stage Single Nozzle Systems

Upgrade your current single stage system. Nitrous Outlet EFI dual-stage single nozzle systems are the simple way to add another stage of nitrous via their 1/8 NPT wet nozzle, break up a large shot, and keep the tires hooked up and going down the track nice and straight. They include everything needed to add horsepower to your late model EFI vehicle--hardware, wiring, jetting, solenoids, hoses, and nozzles. They also include a wide-open throttle (WOT) switch that only allows the systems to be activated when the motor is at full throttle. This feature will help in preventing engine damage and lean spikes. These complete race-proven Nitrous Outlet systems will convert your system to a true dual stage capable system.

Not Yet Reviewed

$1,585.99

—

$1,806.99

Nitrous Express Nitrous Plumbing Kits

Nitrous Express offers several nitrous plumbing kits highlighting their selection of precision nozzles. Available with Shark, Piranha, SSV, STD, or dry nozzles, these direct port NX kits contain all of the right components to get the performance flowing in your setup. The kits include stainless steel tubing, B-nuts, sleeves, distribution blocks or hex rails, fittings, lines, and jetting. They are available with or without solenoids. Plumb your setup with nitrous kits that offer more flow and more go from Nitrous Express.

5.0 out of 5 stars ( 1 )

$1,587.65

—

$1,816.54

Nitrous Outlet 4150 Hornet Race Dual-Entry Plate Conversion Kits

Nitrous Outlet 4150 Race dual entry Hornet plate conversion kits come out of the box with everything you need to spray up to 700 hp and are capable of flowing up to 880 hp with additional jetting. These conversion kits have two inlets for nitrous and fuel, allowing you to spray either a huge shot of nitrous or to have two stages. They feature a large, unique cone-shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat, and 15 discharge ports for nitrous and 15 discharge ports for fuel. Their 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4150 Race dual entry Hornet plate conversion kits are CNC-machined from 6061 billet aluminum, have a black anodized body and red anodized stinger, and are CNC-engraved with the Nitrous Outlet logo. Overview: * 880 hp max flow * Dual entry * 4150 flange * 360 degree discharge pattern * Anodized billet aluminum plate * Hardlines, bracket, gasket, jetting, and hardware included * E85 compatible with different jetting * Jetting included for 100-700 hp

Not Yet Reviewed

$1,609.99

71 Results Found For "JET"