Free Shipping on Orders Over $109 at Summit Racing

EPAS Performance Electric Power Steering Kits

EPAS Performance electric power steering kits provide modern power steering for your classic car. These performance systems are available to outfit a wide range of vintage and classic vehicles from 1920-1980. An easy step-by-step installation manual is available online for each of the kits that EPAS offers. There is no major or irreversible modifications made to your vehicle, as everything is located under your dash and is almost, if not completely, invisible. How the systems work: The computer measures the amount of effort on the steering wheel and amplifies it with the aid of the electric motor. A potentiometer allows you to have more or less assistance, so you can adjust the amount of power assist. For example, you can have maximum power assist while on a parking lot, and less on the highway. Select the EPAS Performance electric power steering kit for your application needs. EPAS Performance electric power steering kits include: * Electric motor unit * Mounting hardware * Prewired control module * Some kits may also be available with steering columns

3.83 out of 5 stars ( 23 )

$1,548.99

—

$1,942.99

EPAS Performance Hydroelectric Pump System Kits

EPAS Performance's Hydroelectric Pump System has a program that works with an angle sensor and CAN protocol. The converter talks to the pump via the angle sensor, ramping up the system's pressure as needed. There is no noticeable delay or drop in pressure when input at the steering wheel is exerted. This steering conversion kit includes 6 ft. of high-pressure sending hose, 6 ft. of low-pressure return hose, and the power cords are 10 ft. in length. An oil cooler can be added for racing applications. The wiring harness is essentially plug-and-play, and only requires a hot ignition source and full battery power. System draw is anywhere between 1 amp to 45 amps, spending most of its time in the lower amp range. Maximum pressure of the unit is rated at 1900 psi @ 5 gpm; and the absolute maximum length of the pressure hose and return lines is 17 ft. INCLUDED IN KIT: * EPAS Performance Hydroelectric Pump * Universal mounting bracket * High-pressure sending hose * Low-pressure return hose * Pre-wired control module

Not Yet Reviewed

$1,849.99

Fleece Performance LML CP3 Conversion Kits

Why convert your LML's fuel system from a CP4 to a CP3? Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms—resulting in costly repairs for owners when a CP4 fails. You can improve your LML Duramax's reliability and fueling capability, as well as avoid costly failure with Fleece Performance LML CP3 conversion kits. They provide OEM fit-and-finish features, like Fleece's exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and their valley feed line to support aftermarket lift pump applications. Fleece Performance LML CP3 conversion kits are offered with or without pump and the pump kits come in two different style pumps—a Bosch CP3 injection pump or Bosch CP3 pump with heavy-duty 10mm cam. Choose the kit that is right for you. All kits include: * CP3 to rail high pressure fuel line * High-flow CP3 feed and return fuel fittings * Preformed fuel feed and return fuel hoses * CP3 mounting adapter * Dosing injector distribution block, feed and return lines * FCA extension harness * Low pressure fuel feed line * Hardware kit

5.0 out of 5 stars ( 1 )

$1,999.00

Flaming River 1955-57 Chevy Power Rack and Pinion Cradle Kits

Flaming River 1955-57 Chevy power rack and pinion cradle kits make your dream ride a dream to drive! Flaming River makes your classic even better with their unique and easy-to-install cradle kits. The true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location--no suspension modifications are needed. Plus, by mounting the rack on the cradle system, you are reinforcing the Chevy chassis and providing increased ground clearance. Kits are available without columns or with your choice of polished or paintable tilt columns--something your '57 never had! Tri-five Chevys are probably some of the most recognized American classics, and to restore one is many an enthusiast's dream. Give your 1955-57 Chevy perfect modern steering from Flaming River 1955-57 Chevy power rack and pinion cradle kits.

3.75 out of 5 stars ( 4 )

$1,929.99

On Sale

MSD Direct Ignition Systems

The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition

4.0 out of 5 stars ( 5 )

$1,799.95

—

$2,049.95

$1,618.95

—

$1,843.95

PSC Power Steering Conversion Kits

PSC power steering conversion kits will transform your rig's handling capabilities. These kits contain quality components that will upgrade your Jeep and allow for easier, better maneuvering on the trails and off.

Not Yet Reviewed

$1,970.00

Global West Suspension Power Steering Conversion and Upgrade Kits

Improve overall driving performance and prevent your car from wandering over bumps on the road with one of these power steering conversion and upgrade kits. Global West is known for manufacturing high-quality suspension components to solve commonplace issues, such as bump steer, and to help improve handling on early model vehicles. Bump steer is the undesirable result of wheel to toe-in or toe-out when the suspension moves up or down. Global West power steering upgrade systems are simple bolt-on kits which remove much of the unwanted wander in your steering. These suspension power steering conversion and upgrade kits include: * Special mounting bracket which sets the angle of the steering box for the correct geometry (a new idler arm is also required) * Dual ball joint-type center link * Inner tie rods * Tubular adjusting sleeves * Outer tie rods * Center link adapter * Fast-ratio steering gear * Pitman arm * Steering coupler * Intermediate steering shaft * Hardware and a new sway bar

Not Yet Reviewed

$1,652.09

Scott Drake Power Steering Conversions

It's like feeling the road for the very first time! Your classic Mustang will be much more fun to drive with a power steering conversion from Scott Drake. The conversion boxes are remanufactured up-to-date integral power steering gearboxes that will provide a true modern power steering feel, feedback, and a sporty 16:1 ratio. They bolt directly to the factory mounting location and to fit the stock pitman arm without any interference or modification of the shock tower. Drake offers kits to convert manual to power steering and to upgrade factory power to modern power steering. Eliminate leaky control valves and sloppy steering; enjoy driving your classic with a Scott Drake integral power steering conversion kit.

Not Yet Reviewed

$1,649.95

Nitrous Outlet 4500 Hornet Dual-Entry Plate Conversion Kits

Nitrous Outlet 4500 dual entry Hornet plate conversion kits come right out of the box with everything you need to replace your old plate and are capable of spraying 800 hp. The Hornet is designed with the same great technology as the Stinger, with a larger conical cone and dual entry. Each Hornet has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4500 dual entry Hornet plate conversion kits are CNC-machined from 6061 billet aluminum, have a black anodized body, red anodized stinger, and are CNC-engraved with the Nitrous Outlet logo. Overview: * 700 hp max flow * Dual entry * 4500 flange * 360 degree discharge pattern * Anodized billet aluminum plate * Gasket, jetting, and hardware included * Jetting included for 100-700 hp

Not Yet Reviewed

$1,563.99

Arnott Coil Spring Conversion Kits

Arnott coil spring conversion kits are expertly designed to replace a vehicle's failing air suspension components with traditional steel springs. All of Arnott's coil springs are constructed from U.S. steel and are designed and tested to provide a great ride along with many years of trouble-free driving. If you have an older vehicle or you're dealing with a multitude of air system issues—order the Arnott coil spring conversion kit designed for your make and model. Items, features, and notes: * Custom valved shock absorbers * Powdercoated coil springs * Most kits available with electronic bypass module (EBM) that eliminates fault codes * Pre-assembled for safe and easy installation * OE fit with no necessary modifications * Not recommended for customers who tow larger trailers or often carry large loads (may cause improper angles for headlight beams)

4.55 out of 5 stars ( 29 )

$1,510.21

—

$1,929.59

Trail-Gear IFS Eliminator Heavy-Duty Kits

It's all about the springs! Trail-Gear IFS Eliminator heavy-duty kits offer front springs in a more durable version with 20 percent higher spring rate. They have added a 7th leaf and readjusted the length of the leaves to match. So, if you're running a larger V6 or V8 motor, you'll appreciate these muscular springs. Trail-Gear IFS Eliminator heavy-duty kits are available in different configurations to best suit your specific vehicle application needs. Kits include: * Front leaf springs (your choice of 3, 4, or 5 in. spring) * High Steer crossover steering kit * Front drop hanger with greasable bolts * Greasable 5 in. shackles * Frame tubes and jigs * Steering stabilizer kit * U-bolt flip kit * (2) Shock hoops * (2) Bilstein shocks * (2) Front brake lines * (2) Vented rotors * (2) Bump stop extensions * (2) Wheel spacers * (2) Bump stops * Front axle gusset * Axle diff armor * Knuckle service kit * Wheel bearing kit * Motor mount cover plates * Spring pad * Instructions

Not Yet Reviewed

$1,799.99

Nitrous Outlet LSA Blower Spacer Nitrous Plate Conversion Kits

Nitrous Outlet LSA blower spacer nitrous plate conversion kits easily install between the lid and blower—the entire blower does not need to be removed. Crafted from CNC-machined billet aluminum, the plates are ready, out of the box, to spray 300 hp (up to 380 hp with additional jetting). Plus, the inlet fittings for nitrous and fuel are readily accessible from the front of the supercharger without making any modifications to the supercharger or cowl. Offering a more controlled discharge, these blower spacers have discharges that spray directly into each cylinder after the intercooler for better cylinder distribution and atomization. Nitrous Outlet LSA blower spacer nitrous plate conversions work for wet or dry systems and include gasket, hardware, and jetting.

Not Yet Reviewed

$1,559.99

Dorman Air Suspension Conversion Kits

When maintaining your vehicle's original air suspension system is no longer necessary or a failed system becomes too costly to repair, Dorman has numerous cost-saving solutions. Dorman air suspension conversion kits replace original air springs with conventional, corrosion-resistant steel springs. They are offered in complete or partial delete kits, providing you with a cost-effective alternative to restore your vehicle's smooth ride with a consistent spring rate and ride height for safe driving. Dorman thoroughly tests all parts for ride handling to ensure performance. Choose the recommended kit for your vehicle.

3.5 out of 5 stars ( 2 )

$1,713.99

Nitrous Outlet LS9 Blower Spacer Nitrous Plate Conversion Kits

Spray bars for superchargers have always required the supercharger be removed and machined—until now. Nitrous Outlet LS9 blower spacer nitrous plate conversion kits simply fit between the lid and blower. Crafted from CNC-machined billet aluminum, the plates come ready, out of the box, to spray 300 hp—but can spray 380 hp with additional jetting. The inlet fittings for nitrous and fuel are easily accessible from the front of the supercharger without making any modifications to the supercharger or cowl. Offering a more controlled discharge, these blower spacers have discharges that spray directly into each cylinder after the intercooler, delivering better cylinder distribution and atomization. Nitrous Outlet LS9 blower spacer nitrous plate conversions work for wet or dry systems and include gasket, hardware, and jetting.

Not Yet Reviewed

$1,623.99

Nitrous Outlet 4150 Hornet Race Dual-Entry Plate Conversion Kits

Nitrous Outlet 4150 Race dual entry Hornet plate conversion kits come out of the box with everything you need to spray up to 700 hp and are capable of flowing up to 880 hp with additional jetting. These conversion kits have two inlets for nitrous and fuel, allowing you to spray either a huge shot of nitrous or to have two stages. They feature a large, unique cone-shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat, and 15 discharge ports for nitrous and 15 discharge ports for fuel. Their 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4150 Race dual entry Hornet plate conversion kits are CNC-machined from 6061 billet aluminum, have a black anodized body and red anodized stinger, and are CNC-engraved with the Nitrous Outlet logo. Overview: * 880 hp max flow * Dual entry * 4150 flange * 360 degree discharge pattern * Anodized billet aluminum plate * Hardlines, bracket, gasket, jetting, and hardware included * E85 compatible with different jetting * Jetting included for 100-700 hp

Not Yet Reviewed

$1,609.99

Trail-Gear IFS Eliminator Kits

With all of the choices on the market for solid axle conversion, you're probably wondering what makes Trail-Gear IFS Eliminator kits stand out? These kits contain the highest quality and most complete parts roster at an affordable price. Plus, Trail-Gear offers the package in three different ride heights! Kits include: * Front leaf springs (your choice of 3, 4, or 5 in. spring) * High Steer crossover steering kit * Front drop hanger with greasable bolts * Greasable 5 in. shackles * Frame tubes and jigs * Steering stabilizer kit * U-bolt flip kit * (2) Shock hoops * (2) Bilstein shocks * (2) Front brake lines * (2) Vented rotors * (2) Bump stop extensions * (2) Wheel spacers * (2) Bump stops * Front axle gusset * Axle diff armor * Knuckle service kit * Wheel bearing kit * Motor mount cover plates * Spring pad * Instructions

5.0 out of 5 stars ( 1 )

$1,799.99

The Right Stuff 4-Wheel Disc Brake Conversion Show 'N Go Kits

The Right Stuff 4-wheel disc conversion Show 'N Go kits offer the look of high-end brakes without the price! Besides having every part you need in one package without "braking" the bank, Show 'N Go kits kick up the bling with drilled and slotted rotors with zinc plating, your choice of red or black powdercoated calipers, and braided stainless steel hoses. The Right Stuff manufactures these kits from quality materials, including Timken bearings, to ensure ultimate performance and dependability. Forget the rust and go for the WOW factor with The Right Stuff Show 'N Go 4-wheel disc conversion kits.

3.67 out of 5 stars ( 24 )

$1,500.60

—

$1,950.30

Manufacturer Rebate

LEED Brakes Front Disc Brake Conversion Kits

LEED front disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on and precision-machined.

4.32 out of 5 stars ( 72 )

$1,531.94

—

$1,914.99

Special Offer

On Sale

Flaming River 1967-69 Camaro Manual Rack and Pinion Cradle Kits

Flaming River 1967-69 Camaro manual rack and pinion cradle kits update your classic muscle with manual steering that feels like power! Your big or small block Camaro can enjoy these precision-designed, American-built cradle systems. Flaming River manual rack and pinion kits feature their patented, welded cradle that structurally reinforces the rack and bolts in your existing chassis mounting locations--no cutting, welding, or drilling is required! These lighter, more responsive systems are available with or without tilt columns (a key column is available for 1969 kits) and billet swivel floor mounts. Universal joints, wiring connectors, and mounting hardware are also included. Enjoy travel and ratio with a full turning radius--steer your classic with bolt-on Flaming River 1967-69 Camaro manual rack and pinion cradle kits.

Not Yet Reviewed

$1,730.99

Classic Performance Front Coilover Conversion Kits

Classic Performance front coilover conversion kits can help drop your ride from just below stock height to several inches lower. The included shocks are double adjustable coilover models so you can pinpoint the type of ride you want. These kits provide lower control arms featuring either a silver or black powdercoat finish, depending on application; upper control arms are included with most kits, along with mounting hardware. Convert your vehicle into a low-riding road-hugger with a Classic Performance front coilover conversion. Order the kit designed to fit your application.

Not Yet Reviewed

$1,949.99

The Right Stuff Street Series Disc Brake Conversion Kits

The Right Stuff Street Series disc brake conversion kits feature all the quality components needed to convert your front or rear brakes to disc. Offered for both manual and power braking systems, Street Series kits are application-specific, maintain your vehicle's stock height or provide a 2 in. front drop, and are available with numerous component and finish upgrade options to make your braking system your own. So what's stopping you? Hundreds of kits are available; choose The Right Stuff Street Series conversion recommended for your vehicle.

3.41 out of 5 stars ( 22 )

$1,500.60

—

$1,998.60

The Right Stuff 4-Wheel Disc Brake Conversion Best of Show Kits

You'll take top honors with The Right Stuff 4-wheel disc brake conversion Best of Show kits. Besides having every part you need packaged in one kit, these manual kits combine The Right Stuff's Show'N Go and Show Stopper trim packages for the ultimate WOW factor! Drilled and slotted rotors, braided stainless steel hoses, your choice of red or black powdercoated calipers, a chrome-plated master cylinder, and combination valve with bracket. The Right Stuff Best of Show 4-wheel disc conversion kits offer not only the best performance and dependability but also the ultimate in head-turning looks.

4.08 out of 5 stars ( 13 )

$1,743.30

—

$1,958.40

The Right Stuff 4-Wheel Disc Brake Conversion Kits

The Right Stuff 4-wheel disc brake conversion kits offer everything that you need for your application in one kit without "braking" the bank. If you're experiencing brake fade or need more stopping power, The Right Stuff kits are manufactured from top-quality materials, to ensure performance and dependability. These 4-wheel disc brake conversion kits are the most complete packages available, so do the job right with The Right Stuff kits.

3.84 out of 5 stars ( 55 )

$1,522.45

—

$1,983.75

The Right Stuff Front Disc Brake Conversion Kits

Are you tired of having brake fade or not enough stopping power? The Right Stuff front disc brake conversion kits give you a complete brake kit without breaking the bank. They manufacture these kits from quality materials to ensure performance and dependability. Stop your ride in style and safely with The Right Stuff and their disc brake conversion kits.

4.33 out of 5 stars ( 220 )

$1,645.65

—

$1,845.75

74 Results Found For "Conversion"