Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
19 Results Found For "Builders"
Trail-Gear Rock Assault Front Axle Housings
Trail-Gear Rock Assault front axle housings give you clearance to go where you want and the muscle to do it! Their strength comes from heavy-duty, press-formed, 1/4 in. plate steel center sections; 1/2 in. plate steel differential mounting surfaces; 5/16 in. thick 1020 DOM axle tubes; and forged 1035 steel knuckle balls. Trail-Gear's knuckle balls are stronger than stock, so there are no worries of them becoming closed or bent. And, the thicker differential mounting surface ensures that the studs cannot pull out, even under heavy loads. Trail-Gear's design—offset tubes and shaved center section—provides you with added clearance to climb the high country. Plus, since housings are precision-aligned with computer imaging, you can rest assured they're 100 percent straight and true. You have a choice of bare tubes, or with spring perches installed—or 3-link ready with a panhard bracket included. You're equipped to attack any terrain with Trail-Gear Rock Assault front axle housings.
( 1 )
$1,599.99
Air Lift 3P Air Management Systems
Air Lift engineers asked themselves: what would the ultimate air suspension be like? How would it combine an easy-to-use, reliable, and feature-rich system with powerful technology and beautiful design? Air Lift Performance 3P air management system is the result of three years of development and testing. It is the most advanced product Air Lift has ever created. The 3P combines pressure-based control with the ability to add ride-height sensing technology with the upgrade to height sensors. While both types of air management have been utilized before, this is the first product to harness the benefits of both systems—instantly improving suspension control, performance, and vehicle ride flexibility. (See notes on Model 27780 below) Kits include: * 3H/3P digital controller * Integrated ECU + manifold * Advanced electrical wiring harness * 60 ft. of 1/4 in. air line * Inline water filter * All wiring, fuses, hardware, etc. required for installation Model 27780 has additional features: In an effort to make the 3P air management systems more customizable to builders across the globe, Air Lift has introduced a threaded-port manifold. With the option of threaded FNPT ports, builders can create trunk-setups so stunning that they rival their vehicles' stance. This manifold allows builders to choose the fitting and air line option that best fits their needs and aesthetic. The threaded ports on the new manifold make integrating straight or elbow hard lines and/or threaded-steel braided air lines easier and safer, with less chance of damage to the internal O-rings. The threaded-port manifold is built with the same advanced technology as the push-to-connect 3H and 3P systems—high-grade, fully integrated components, a 32-bit processor for precise 4-corner control, built-in Bluetooth, and an intelligent accelerometer for accurate adjustments. With limitless mounting options and a simple, single harness connection, the manifold can be easily installed to the builder's exact specifications.
Not Yet Reviewed
$1,758.99
March Performance Sport Track Chevy Serpentine Pulley Kits
These March Performance Sport Track Chevy serpentine pulley kits are designed for the budget-minded engine builder with the same quality and innovation as the normal March Performance kits. They are designed to mount the air conditioning low and on the passenger side for a compact and clean appearance. The serpentine pulley kits will eliminate belt throwing and offer no-slip operation. These March Performance Sport Track Chevy serpentine pulley kits are manufactured from 6061-T6 billet aluminum and are available in black or silver powdercoated finishes.
( 58 )
$1,532.99
—
$1,972.99
Moroso Vacuum Pumps
Built for racers and engine builders who craved the performance, Moroso racing vacuum pumps are manufactured from billet aluminum and feature a precision-machined shaft, rotor, and bearings that will withstand the rigors of racing. They work by producing high crankcase vacuum, which increases power by improving ring seal, preventing blowby, and detonation. Allowing the use of lower-tension piston rings for less friction. These positive pumps are much more consistent and effective than header-mounted evacuation systems.
( 5 )
$1,599.99
—
$1,786.99
Aeromotive 3.5 GPM Brushless Variable Speed In-Tank Gear Pumps
Aeromotive 3.5 gpm brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 3.5 gpm in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,863.60
—
$1,996.75
MechMan Professional Series Core Running Engine Stands
Take your engine builds to the next level with MechMan's Professional Series core running engine stands. Built to withstand the rigors of high performance engines, these stands provide a sturdy and reliable platform for testing and tuning. With their robust construction and precise engineering, you'll be able to get your engine up and running quickly and safely. Perfect for engine builders, tuners, racers, and serious enthusiasts, MechMan running engine stands are a powerhouse tool addition to any workshop. Order the model recommended for your engine application. Multiple mounting options for various engine types: * GM SBC/BBC mount kit – Classic small and big block Chevy support * GM LS Engine (Gen III-IV) mount kit – Modern LS-series compatibility * GM LT Engine (Gen V) mount kit – Gen V direct-injection engine support * Ford Small Block Engine mount kit – Classic Small Block Ford muscle ready * Ford Coyote 5.0L Engine mount kit – Modular Ford muscle ready * Ford Godzilla 7.3L Engine mount kit – Heavy-duty big block power * Toyota's legendary inline-six engines -- Both 2JZ-GTE and 1JZ-GTE platforms
Not Yet Reviewed
$1,549.00
—
$1,749.00
Aeromotive Eliminator Brushless Variable Speed In-Tank Fuel Pumps
Aeromotive Eliminator brushless variable speed in-tank fuel pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these True Variable Speed (TVS) units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The Eliminator in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,539.50
—
$1,690.15
Edelbrock Cross-Ram LS3 Intake Manifolds
Edelbrock Cross-Ram LS3 intake manifolds are ideal for anyone looking to combine great looks and outstanding performance between 1,500 - 7,000 rpm. The unique dual-plenum design features 13" long runners with flanges that will accept two, 90mm GM LS3 throttle bodies. The unique cross-ram dual-plenum design is ideal for twin turbo applications. When matched with high flowing air filters and inlet tubes, the dual-plenum system gives neck-snapping performance with plenty of options for engine builders and tuners. The manifolds are available in multiple finishes for that custom look.
( 2 )
$1,795.95
—
$1,995.95
Edelbrock Victor DR-23 Degree Pro Port Raw Cylinder Heads
Edelbrock Victor DR-23 Degree Pro Port raw cylinder heads are ready for finishing by the professional cylinder head porter or engine builder. They have as-cast ports with enough metal thickness to allow for CNC porting to different sizes. The heads are available for a variety of Chevrolet engine applications.
Not Yet Reviewed
$1,821.50
BoostLine Connecting Rods
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$1,599.99
—
$1,695.99
ICEngineworks Full Systems
For engine builders, fabricators, and craftsmen, ICEngineworks full systems are the solution to designing exhaust headers which fit perfectly, while saving enormous amounts of time and money. These complete sets provide you with the equipment needed for all three stages of your project: assembling the plastic model, transferring the pattern to stainless steel for precise cuts, and welding all the pieces together. In brief, you can lay out the exact path for each tube--from cylinder to collector--with the ability to easily rearrange, if needed. Once you've chosen the pipe diameter for your model, just snap together the tough inch-long ABS plastic blocks to accurately represent straight and bent metal tubing. This gives you a full-scale 3-D pattern for your stainless steel cuts and weld locations, eliminating errors and wasted material. Re-use the ICEngineworks blocks over and over for headers or any tubular job requiring exact fitment in challenging spaces. Stage II involves using the plastic patterns to line up and cut your actual metal sections from standard U-bends and J-bends. ICEngineworks furnishes a universal aluminum radial cut plate with stud, along with cutting spacers for varying dimensions, making each cut on a vertical band saw simple and precise. Stage III accessories include a set of unique tack-welding clamps to hold your cut pieces in place for the final welds. A job that once took days or even weeks can now be accomplished in hours! ICEngineworks full systems are available in a variety of standard outside diameter "building blocks," depending on your header pipe size requirements.
Not Yet Reviewed
$1,679.99
COMP Cams Belt Drives
COMP Cams belt drives represent the ultimate in cam timing systems, providing competition engine builders with the most accurate valvetrain components available today. These drives are designed to absorb a significant amount of crankshaft harmonics, which will affect valve motion if they reach the valvetrain. These systems require less power to operate than conventional belt drives, and are proven to be more durable than either gear or chain drives.
( 2 )
$1,624.95
ATI SuperCase TH350 Transmission Cases
The ATI SuperCase TH350 transmission cases are SFI-approved for competition use. The case, bellhousing, and tailhousing are cast from 356T6 cast aluminum. Developed to eliminate all weak points found in the original GM design, this rugged assembly features a steel safety inner liner that weighs only 29 ounces and eliminates the need for any external shields. In addition, the SuperCase features a removable bellhousing that bolts directly to the transmission case instead of the pump bolt locations and has been engineered to accept all internal Turbo 350 components. Order the model that is best suited for your application. Features include: * Meets SFI 4.1 - no shield or blanket required * CNC-machined valve body passages for fast trans-brake release and quicker shift times * Increased thickness extension housing and bell flange area to ward off breakage * Stronger internal lugs and more material to allow room for more clutches * Custom valve body passages can be made to order for builders with specific requirements * Band adjuster version for non-GM internal components * Retains OEM governor cavity for auto shift applications * Also available with no governor (NG) or forward band machine work
( 1 )
$1,781.99
Wilwood Forged Narrow DynaPro Big Brake Front Brake Kits
Radial mounting provides secure and accurate installation of Wilwood forged billet DynaPro 4-piston calipers with large diameter rotors for select front and all-wheel-drive sport compacts, such as late model Mazdas and Fiats. These Big Brake front kits are the perfect complement to wheel, tire, and suspension upgrades on daily drivers, competition vehicles, and custom styled show machines. Kits are engineered for each specific vehicle to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper powdercoat finishes and rotor designs provide choices that enable the builder to personalize the style and optimize brake performance. Order the disc brake kit recommended for your vehicle. Additional details: * Proprietary Spec-37 iron material (rotors) * 11 in. diameter GT 36 slotted, directional vane rotors * Billet aluminum calipers * Lightweight aluminum hats * High temperature, fluid, and abrasion-resistant Type III anodized finish on Narrow DynaPro calipers * BP-10 or BP-40 (high-temperature) brake pads, depending on kit
Not Yet Reviewed
$1,685.43
Brodix Cylinder Heads PB 2000 Cylinder Heads
Looking for raw horsepower in a cylinder head? Brodix PB 2000 cylinder heads are simply the best of the best. They flow power in two versions--out-of-the-box and completely CNC-ported. Both begin as strong A-356 virgin aluminum castings and feature solid phosphorous guides, gorilla valve seats, and extra thick decks. Designed by legendary engine builder Sonny Leonard, Brodix PB 2000 box-ready models flow an unbelievable 535 cfm, while the fully CNC-ported models flow 587 cfm and are nitrous friendly. They are available bare or packaged with valves, valve springs, retainers, locks, seals, and rocker studs. When it's power and performance you want, Brodix PB 2000 cylinder heads are what you need to top your big block!
Not Yet Reviewed
$1,989.99
Fab Fours Jeep JK Grumper Winch Bumpers
When it comes to front-end protection for off-road use, the designers and builders at Fab Fours like going to extremes. One of their newest incarnations, the Grumper for Jeep JK Wranglers, combines a bumper and extended grille for one incredible air flowing, winch hiding, front-end masterpiece. These bumpers include clevis mounts, CNC laser-cut Angry Eye light cutouts, and a winch mount. The extreme stubby design gives exceptional tire clearance, while their 11-gauge steel construction provides strength without excessive weight. Models are available in bare steel or with a matte black 2-stage powdercoat over epoxy primer finish. Keep your winch and front-end protected with a Fab Fours Jeep JK Grumper winch bumper. Features include: * Patent pending * Aggressive design * Winch-ready for Warn Zeon 10 * Fully customizable four removable inserts for different color options * Simple and quick Installation
( 1 )
$1,845.92
Aeromotive Pro-Series In-Tank Fuel Pumps
Aeromotive Pro-Series in-tank fuel pump assemblies feature a design with custom tank builders and fabricators in mind, providing multiple mounting options to fit in almost any fuel cell or tank. Order the Aeromotive Pro Series in-tank fuel pump assemblies best suited to deliver cool, quiet operation for your custom ride!
Not Yet Reviewed
$1,550.60
CP Pistons 400 Chevy 18 Degree Dome Gas Port Pistons
CP Pistons 400 Chevy 18 degree dome gas port pistons are designed for serious motor builders and are intended for use on drag racing engines. They feature gas ports in the deck of the piston to provide the top ring with extra sealing in between the compression and power stroke. These pistons include chamfered pins, wire locks, dedicated left and right hand forging, and are all balanced to +/-1 gram. With their radius dome, radius valve relief, and special design for use with backcut rings, these pistons produce the kind of power that every drag racer wants!
Not Yet Reviewed
$1,568.70
Edelbrock Victor DR-17 Pro-Port Raw Cylinder Heads
Sportsman racers need reliable parts that will get them through the entire race season. Edelbrock Victor DR-17 Pro-Port raw cylinder heads are designed to give consistent performance in big block Chevys. These new-wave heads are based on the 24 degree Victor Gen II raw design, but feature 17 degree intake valve angles for improved efficiency and combustion, and a slight adjustment in location for better flow. Edelbrock uses a pressurized chamber and aerospace process called Hot Isostatic Pressing to compress castings at nearly 900 degrees F and 30,000 psi to give them nearly three times the average fatigue life, wicked strength, extreme density, and near billet aluminum consistency. DR17 Pro Port heads are cast with enough wall thickness for CNC-machining to various port dimensions, and will allow most CNC port shapes, sizes, and locations. Be ready to rumble next season with Edelbrock Victor DR-17 Pro-Port raw cylinder heads. Additional features include: * Raised intake port + 0.400 in. * Taller valve cover rails * Revised water jackets for maximum-effort port designs * Generally, seats and manganese-bronze valve guides are included, but not installed * Exhaust port location raised + 0.600 in. * Shaft rocker system required * Tall deck applications require the use of spacers ** Professional cylinder head preparation is required for use.
Not Yet Reviewed
$1,821.50
