Free Shipping on Orders Over $125 at Summit Racing

On Sale

MSD Pro 600 CDI Ignition Boxes

MSD Pro 600 CDI ignition boxes are 8-channel capacitive discharge ignitions designed for high cylinder pressure, high-horsepower engines running coil-near-plug ignition. When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail, MSD PRO 600 boxes are the answer. Features include: * Eight outputs of up to 680 mJ of energy * All necessary wiring harnesses included * Continuous 600 mJ operation, without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kilovolts output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 volts minimum required for starting and running * 12 volts minimum required for 600 mJ opereation * Maximum operating voltage 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Reverse battery protection * Protection against shorted or open coils, and over temperature * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power operation * Fits most coil-per-plug engines up to eight cylinders (including 4- and 6-cylinders) * Additional CAN based features, when used with Holley EFI * Approved for NHRA Pro Mod Class

Not Yet Reviewed

$2,049.95

$1,843.95

FiTech Go EFI 4 600 HP Fuel Injection Systems with Go Spark CDI Box

FiTech offers Go EFI 4 600 hp fuel injection systems for your performance vehicle. The bright aluminum power adders include Go Spark CDI box; some models come with inline fuel delivery master kit, as well. Go EFI systems are perfect for your everyday driver, right up to your weekend street machine or bracket racer. They feature the fastest, most accurate self-learning available, timing control, wet flow annular discharge, and tons of additional features. Go EFI systems fit any 4-bbl intake manifold (including 4500 flange) and are the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine! They are also the only computer-mounted throttle bodies that offer spark control without the need for an external spark box or special distributor. Other features include a built-in fuel pressure regulator and hand-held controller with touch screen for quick and easy initial set-up.

Not Yet Reviewed

$1,705.99

FiTech Go EFI 4 Power Adder 600 HP Self-Tuning Fuel Injection System with Force Fuel System

FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems with Force Fuel systems are a unique combination of a boost-ready throttle body and fuel injection upgrade convenience. The Power Adder systems allow you to ditch that old carburetor and keep your supercharger, blower, or nitrous setup. The Force Fuel system helps quench its thirst with easy hookup and versatile mounting. Blow away all the competition when you order the FiTech Easy Street 600 hp and Force Fuel systems combo designed to fit your boosted performance engine application. Includes: * FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems * FiTech Force Fuel systems

Not Yet Reviewed

$1,606.99

—

$1,879.99

FiTech Go EFI 4 600 HP Self-Tuning Fuel Injection Systems with Go Fuel In-Tank Modules

FiTech's Go EFI 4 self-tuning fuel injection is ideal for everyday drivers to weekend cruisers or even bracket cars. The system supports engines making up to 600hp yet is capable of the fueling needs of a 200hp street rod. The aluminum throttle body easily fits any 4-bbl intake manifold. Thanks to the built-in ECU, MAP sensor and fuel pressure regulator, wiring is kept to minimum with just a few connections for an easy install. The quick self-learning technology that FiTech is known for, combined with our wet annular discharge design will you your engine fired up and idling smooth in minutes. All it takes are a few taps of the supplied touchscreen controller which can be left plugged in to use as gauges, or removed and stored in the glovebox. These kits also include FiTech's Go Fuel In-Tank fuel pump module. The unique universal design allows you to install the pump in most tanks ranging from 6 to 15 inches deep. The supplied 340 lph fuel pump is compatible with gasoline, E85, ethanol, methanol and alcohol based fuels. Kits include a billet aluminum module with -6AN O-ring boss fittings, 2 different styles of filters, hardware, seals, and terminals.

1.0 out of 5 stars ( 1 )

$1,655.99

FiTech Go EFI 4 600 HP Self-Tuning Fuel Injection Systems

When it comes to fuel injection versus carburetors, new school is just too cool. FiTech Go EFI 4 600 hp self-tuning fuel injection systems have the ECU mounted on the throttle body for greater self-containment, clean installation, and easy setup. These trick systems fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 600 hp. They feature a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it—and the ability to change air/fuel ratios and ignition timing on the fly. Each system has a hand-held controller with a touch screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. FiTech Go EFI 4 600 hp self-tuning fuel injection systems leave the guesswork behind. Order the model with options best-suited for your application. Additional features: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Adjustable fan control switch * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet Flow swirl spray annual discharge obtains complete atomization * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle

4.16 out of 5 stars ( 257 )

$1,587.99

FiTech Go EFI 4 600 HP Fuel Injection Systems with Force Fuel Systems

FiTech Go EFI 4 600 hp fuel injection systems with Force Fuel systems combine the self-tuning, 4-injector setup with a versatile Force Fuel sump. The Go EFI 4 600 systems are designed for use on engines from 250 to 600 hp. They feature a built-in fuel pressure regulator and an ECU that self-adjusts to find the best tune—plus the ability to change air/fuel ratios and ignition timing on the fly. The Force Fuel systems connect to your stock mechanical or electric fuel pump and supply the EFI system with high-pressure. They do so through the use of an internal 340 lph (approximately 90 gph) pump—no new feed line from your tank is necessary. Ditch that old carburetor and advance hassle-free into the modern EFI world with a FiTech Go EFI 4 600 hp fuel injector and Force Fuel system combo. Models are available with a variety of options; select the system best suited for your application.

2.57 out of 5 stars ( 7 )

$1,622.99

—

$1,879.99

FiTech Go EFI 4 PA 600 HP System/Go Spark Fuel Injection Master Kits

FiTech Go EFI 4 PA 600 hp system/Go Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their Go EFI 4 Power Adder TBI with their Go-Spark CDI ignition and either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. The throttle bodies are available in different finishes. Choose the master kit with your preferred finish and fuel delivery solution. Go EFI 4 Power Adder system can support up 21.7lbs of boost right out of the box, as well as a single stage of wet nitrous. The air/fuel ratio is monitored and adjusted with FiTech's fast reacting self-learning technology, plus the ignition timing can be controlled based on boost or nitrous (including a retard feature). A touch screen handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info is included. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. *Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

Not Yet Reviewed

$1,706.99

—

$1,716.99

FiTech Go EFI 4 PA 600 HP System Fuel Injection Master Kits

FiTech Go EFI 4 PA 600 hp system fuel injection master kits are inclusive EFI kits with fuel delivery solutions. In these master kits, FiTech mates their Go EFI 4 Power Adder TBI with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. Go EFI 4 Power Adder system can support up 21.7lbs of boost right out of the box, as well as a single stage of wet nitrous. The air/fuel ratio is monitored and adjusted with FiTech's fast reacting self-learning technology, plus the ignition timing can be controlled based on boost or nitrous (including a retard feature). A touch screen handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info are included. The throttle bodies are offered in different finishes. Choose the master kit with your preferred finish and fuel delivery solution. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. *Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

Not Yet Reviewed

$1,505.99

FiTech Go EFI 4 600 HP Self-Tuning Fuel Injection Systems with Hy-Fuel In-Tank Retrofit Modules

FiTech Go EFI 4 600 hp self-tuning fuel injection systems with Hy-Fuel in-tank retrofit modules are perfect for your everyday driver, weekend street machine, or bracket racer. They feature the fastest, most accurate self-learning available, timing control, wet flow annular discharge, and tons of additional features. These systems mount the self-adjusting ECU on the throttle body, will fit any 4-barrel manifold, and are designed to support 250 to 600 hp engines. Go EFI 4 kits include a hand-held controller with touchscreen for initial setup; throttle linkage that suits most transmissions; and parts are manufactured with OE engineering. FiTech Hy-Fuel tight-fit in-tank retrofit kits are sleek miniature assemblies that allow you to fit a high-volume fuel system into almost any tank, making them ideal for both original and aftermarket fuel tank applications. Additional features include: * Four Hi-Flow 600 hp injectors * Self-tuning ECU immediately takes over after startup * Basic install can be done with just four wires and two sensors * Ignition timing can be controlled and adjusted (via touchscreen) * Uses a Bosch 4.2 wideband oxygen sensor * Systems with mounted ECUs offer spark control without the need of an external spark box or special distributor * Air/fuel ratios can be optimized on-the-fly as you drive * Includes adjustable fan switch * Single 255 lph fuel pump for engines up to 600 hp * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Will work with CDI box, but not required to control timing * And many more features

5.0 out of 5 stars ( 1 )

$1,986.99

FiTech Easy Street 600 HP EFI System Force Fuel/Go-Spark Fuel Injection Master Kits

FiTech Easy Street 600 hp EFI system Force Fuel/Go-Spark fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with a Force Fuel system, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Plus, these kits also provide upgraded spark performance for improved combustion and power output. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer. Fuel delivery options: * Go Fuel Force Fuel system--mounts under the hood and is fed with the original mechanical or electric fuel pump, and then supplies the EFI system with the required high-pressure with the internal 340 lph pump. A 1/2 gallon reservoir prevents fuel starvation, while an internal regulator keeps the pressure at a consistent 58 psi. To ensure clean fuel to the injectors, a serviceable 10-micron fuel filter is supplied along with 5 ft. of hose, AN fittings, return line fitting bung, and liquid-filled gauge. * Go Fuel Mini Force Fuel system is ideal for cramped engine compartments and is s fed through a low-pressure mechanical (or electric) pump saving the need to modify the entire fuel system. Equipped with an efficient 255 lph pump and internal regulator to deliver a consistent 58 psi. Can be installed in four positions and is supplied with hose, AN fittings, return line fitting bung, and liquid-filled gauge.

Not Yet Reviewed

$1,546.99

COMP Cams Thumpr Retrofit Hydraulic Roller Cam and Lifter Kits

Musclecar sound is back and nastier than ever with these Thumpr retrofit hydraulic roller cam and lifter kits from COMP Cams! These cams feature a thumping high performance idle and provide significant horsepower and torque increases. Specially engineered profiles are offered for each unique engine, providing the perfect combination of an early intake valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize your engine's nasty-idling characteristics without negatively impacting streetability. These kits include high-quality matched lifters for unbeatable performance, durability, and ease of installation.

4.55 out of 5 stars ( 22 )

$1,545.95

—

$1,745.95

On Sale

Summit Racing™ Tunnel Ram and Carburetor Pro Packs

Summit Racing™ tunnel ram and carburetor Pro Packs are made for horsepower, pure and simple. For folks with smaller cubic inch engines, we offer Weiand tunnel ram intakes with 450 cfm Holleys that'll deliver the horsepower you crave without saddling your rig with too much carb. For big-motor fans, we have the combo with 600 cfm Holleys. We include the linkage, too! Choose the cylinder head style application needed for your specific vehicle, and enjoy the enhanced performance of a Summit™ Pro Pack!

4.5 out of 5 stars ( 6 )

$1,725.84

$1,574.84

—

$1,971.84

Eddie Marine Manual Drop Seat Pedestals

Add some style to the cockpit of your high performance boat with one of these Eddie Marine drop out seat pedestals. They're made from 1 in. thick 6061-T6 aluminum and can easily replace most stock pedestals. The drop out mechanism is machined completely from billet aluminum. These pedestals have 1/4 in. billet mounting plates on the top and bottom and are reinforced horizontally with a solid 1 1/4 in. aluminum foot rest. Eddie Marine seat pedestals are offered in several heights and nearly a dozen finishes.

Not Yet Reviewed

$1,559.95

Racepak G2X-Pro Data Loggers

Racepak G2X-Pro data loggers are ideal for any large number of sensor input applications, as they can monitor up to 71 channels. They provide lap and segment timing, along with speed and track mapping functions via GPS. Packages for monitoring everything from brake pressure to suspension height—and anything else that can be quantifiably charted—are also available. These loggers are compatible with all Racepak sensors, allowing for full customization. The optional G2X-Pro dash display shows valuable race and lap information, including G-forces and rpm. Gain the advantage of becoming a fully-informed racer with Racepak G2X-Pro data loggers. Items and features include: * G2X-Pro data logger * GPS antenna * Accepts up to 16GB SD Memory Card for countless hours of monitoring * Datalink II software communication cable * Power/ground/engine RPM harness

Not Yet Reviewed

$1,949.95

Summit Racing™ Precision Cast Cylinder Head

Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!

4.05 out of 5 stars ( 20 )

$1,539.99

—

$1,999.99

On Sale

Summit Racing™ Intake Manifold, Carburetor, and Air Cleaner Pro Packs

These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.

4.55 out of 5 stars ( 129 )

$1,887.62

ADS MESA 2.5 Series Coilovers

ADS MESA 2.5 Series coilovers are bolt-on, OEM replacement suspension solutions for your truck. Designed for maximum durability and performance, the large bore 2.5 in. shock bodies increase fluid capacity, effectively resisting shock fade to boost off-road performance. They incorporate an internal floating piston (IFP) to ensure consistent damping performance, improved responsiveness, and increased longevity, plus they are fully rebuildable. Along with many other features, ADS MESA 2.5 Series coilovers are the ultimate upgrades for enhancing your truck's suspension system. Select the coilovers designed for your vehicle. Features and benefits: * UV-stable ceramic powdercoated steel shock body * Black anodized billet aluminum top and bottom caps * 0.875 in. diameter hard chrome plated steel shock shafts * Spacers machined from 304 stainless steel * Premium full synthetic shock oil * Compact design * Silver powdercoated steel springs * Improved road manners and ride quality on and off-road * Enhanced handling capabilities providing safer and faster off-road travel * Competition-inspired performance in an easy to install package * Built with materials offering great corrosion resistance

Not Yet Reviewed

$1,749.95

Clearance

ADS Direct-Fit Race Coilover Shocks

ADS offers direct-fit race coilover shocks for a variety of applications. They're available in non-adjustable or single-adjustable (with 20 valving selections) models. These coilovers were born from years of desert racing experience. Performance, reliability and longevity were the primary concerns when they were in development. Each part has a purpose, from the screw- in end cap reservoirs to the captive lower spring perch. Extended threaded bodies allow for larger range of adjustment on dual rate spring setups. Heavy-duty adjustment collars prevent thread skipping when adjusting preload or crossover engagement. Truncated threads prevent dirt and debris from jamming into hardware.

Not Yet Reviewed

$2,857.95

$1,999.50

Ridetech Coilovers

Ridetech continues to offer today's hot rodders the ultimate in ride quality and handling performance with these Ridetech coilovers. Order shocks recommended for your vehicle. Features include: * Easy-access adjuster knob allows for a wide range of 26 clicks of rebound adjustment * Large rubber external bump stop to prevent harsh bottoming out * 5/8 in. hardened shaft, precision-ground and straightened to a tolerance of .001 in. for increased durability and performance * Billet end cap with integrated debris wiper to prevent seal damage * Oversized rod guide improves piston rod stability * Integral internal bump stop eliminates extension crashing * Monotube design allows large piston for superior oil control, ride quality, and handling * Hard coat external anodizing ensures years of lasting beauty and performance * PTFE piston wiper and progressive valving allow for consistent piston/bore contact and repeatable performance * Monotube bore is cathode-anodized for years of wear resistance * Specially contoured composite gas separator cup optimizes dead length and ensures proper nitrogen/oil separation * One-piece, impact-forged body allows for reliable, leak-free operation * Long-lasting, KEVLAR®-lined bearings allow for side articulation and low noise * 2 1/2 in. coilover springs are made from high-tensile premium steel that's CNC cold-wound; and then a durable blue powdercoat finish is applied

Not Yet Reviewed

$1,960.00

Old Man Emu Nitro Plus Kits

Old Man Emu offers a range of tuned and matched integrated suspension kits to ensure the right suspension is selected for how the vehicle is outfitted and the conditions it will encounter. Old Man Emu Nitro Plus kits are designed to enhance ride quality, ride control, load-carrying capacity, and ride height. They feature Nitrocharger shocks and struts--twin-tube designs with an outer reserve tube providing protection to the internal components off-road, and are an excellent upgrade opportunity for any 4WDer seeking an increase in vehicle control and comfort, increased ride height, and load carrying capability. Each kit will contain a front coil spring set, front struts, and rear shocks. Some kits contain other components as well, that are matched to the specific vehicle. Select the kit designed for your vehicle. Features: * Old Man Emu Nitrocharger Plus struts and shocks * Twin-tube body for added protection in rough terrain * Heavy-gauge steel tube construction for increased strength * 5-position spring seat adjustment with included coil seat spacers, catering to a range of different vehicle setups * Direct replacement for OE and aftermarket suspension systems * Tuned and matched integrated suspension kit allows for increased comfort and control with or without added weight

Not Yet Reviewed

$1,829.30

Nitrous Express Shark Nozzle Nitrous Systems

If you're looking for a nitrous system, you obviously want a lot more power. So, how much more do you want--200 hp? 300? 400? 500? 600? No matter how much it is, Nitrous Express Shark nozzle systems can deliver it. Built around NX's high-flowing "Shark" nozzles, they are tunable to deliver power boosts in those specific increments--and you get to pick whichever one you want. Race fuel is required. Systems include: * Fuel and nitrous distribution blocks or rails * Nozzles * Supply hoses and lines * Fittings * Switches * Solenoids * Wiring * Jets * Mounting hardware

Not Yet Reviewed

$1,531.75

—

$1,970.34

On Sale

Holley Terminator X Stealth 4150 EFI Fuel Injection Systems

Holley Terminator X Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated, and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Stealth 4150 systems also include transmission kick-down provisions for GM TH350, TH400, 200R4, 700R4, and Ford's C4 and C6 applications!

4.0 out of 5 stars ( 9 )

$1,999.95

$1,798.95

Haltech uC-10 Digital Display Dashes

Haltech uC-10 digital dash displays offer crisp, clear, and full color viewing compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. They can also be wired in as a complete standalone unit. The versatility of the uC-10 dashes ensures they can seamlessly integrate into a wide range of vehicles and setups, while offering plenty of scope for sensors and other inputs in a standalone configuration or as an I/O expander in a Haltech environment. Each kit includes dash, connector, cables, momentary switches, and Wi-Fi antenna, along with a Haltech fabric key tag, quick-start guide, and stickers. Features: * Full-color, optically bonded TFT screen * 70-degree minimum viewing angle (vertical and horizontal) * 1280 x 480 resolution, 600+ lumens * IP64 (Dust-tight and protected against water splashes) * 6-digit odometer * 512MB of on-board looped data logging * NSP compatible * 10 user configurable AVIPs * 4 user configurable DPOs * 4 user configurable SPIs * 1 dedicated tachometer input * 1 dedicated alternator excite * 2 ambient light sensors

5.0 out of 5 stars ( 1 )

$1,995.00

On Sale

AMP Research PowerSteps

AMP Research PowerSteps are full length automatic electric-powered running boards that instantly extend when you open your door, and then hide themselves safely out of sight when the doors close for improved ground clearance, aerodynamics, and appearance. And their attractive design and legendary reliable, all-weather performance sets a new industry standard. Features include: * High-strength, diecast aluminum-alloy linkage arms, anodized and PTFE coated to resist corrosion * Precision, zero-maintenance stainless-steel pivot pins * Extruded aluminum steps with a textured powdercoated finish for maximum grip and durability * Weatherproof, OEM-quality electric motors and wiring harness with sealed weathertight connectors * AMP-designed electronic controller employs pressure-sensitive, pinch-proof safety technology * Integrated LED light system (standard) * 600 lbs. load capacity (each side)

4.55 out of 5 stars ( 84 )

$2,099.99

$1,599.99

—

$1,899.99

66 Results Found For "600S"