Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Filters
13 Results Found For "drag radials"
Wilwood DynaPro Radial Front Drag Brake Kits
Wilwood DynaPro radial front drag brake kits put the "stop" in your stopping power, and they're lighter than your stock brakes! Compact enough to fit inside 15 in. drag wheels, these narrow front drag kits feature forged billet DynaPro 4-piston radial mount calipers—with heavy-wall stainless steel pistons to resist corrosion and slow heat transfer from the pads. High performance street/strip SmartPads are shipped with the kits for added stopping power with great fade and heat resistance. Wilwood kits also include solid steel or vented iron rotors and hardware. They bolt on without spindle or steering-linkage modifications, and are fully compatible with the factory master cylinder output. Order the model designed for fitment on your vehicle—then enjoy heavyweight stopping power with lightweight Wilwood DynaPro radial front drag brake kits.
( 2 )
$1,642.80
—
$1,802.85
Wilwood DynaPro Radial Rear Drag Brake Kits
Wilwood DynaPro radial rear drag brake kits deliver high-torque stopping power with a substantial weight savings over the OE brake components. Dynamic-mount steel rotors weigh only 5.7 lbs. each and attach to the OE hubs with lightweight forged aluminum hats—using a T-nut mounting system that allows the rotor to move independently of the hat during heat cycles. This eliminates stress at the mount points and the subsequent rotor distortion that can otherwise occur with fixed-mount steel plate rotors. Dynamic-mount rotors also assure full release from the pads to run true and drag-free down the track. Parking brakes are also eliminated for additional weight savings. Clamping force is provided by radial-mount DynaPro 4R 4-piston aluminum calipers, weighing in at only 4.1 lbs. each. DP4R calipers feature stainless steel pistons and bridge wear plates, internal bore seals—and allow easy access to the pads for service without removing the calipers from the mount. BP-20 compound SmartPads provide high response and holding power when cold, as well as resistance to fade when hot. The complete package mounts to the OE upright and hub with full bolt-on installation. This Wilwood kit is configured for drag racing only and is not recommended for street use.
Not Yet Reviewed
$1,802.85
Weld Racing Alpha-1 Polished Wheels with Double Beadlocks
Weld Racing's Alpha-1 polished wheels with double beadlocks have taken the revolutionary Delta-1 technology to 15-inch sizes. The Alpha-1 features Weld's exclusive hubless design pioneered and proven in NHRA Pro Stock, Funny Car, and Top Fuel racing. Setting a new standard for lightweight drag wheels, the Alpha-1 Series is specifically designed for sportsman racers competing in the radial and small tires classes. The Weld Racing Alpha-1 polished wheels with double beadlocks are available in a 15-inch diameter with widths ranging from 8 to 16–inches and in all popular bolt patterns.
Not Yet Reviewed
$1,530.00
—
$1,987.52
Weld Racing Alpha-1 Pro Gloss Black Wheels with Single Beadlock
The Weld Racing Alpha-1 Pro gloss black wheels with single beadlocks are specifically designed to meet the demands of drag racing, providing durability and performance for both radial and small-tire classes. The Alpha-1 offers ultimate drag racing performance through a lightweight, forged 6061 aluminum construction incorporating a hubless design derived from professional NHRA Top Fuel and Funny Car technology, offering maximum structural strength for sportsman racers. Single beadlocks securely clamp tires, preventing slippage at low pressures and high horsepower, while the gloss black finish provides an aggressive, and easily maintained look. The wheels are available in 15-inch diameters with various widths and popular bolt patterns to fit specific racing needs.
Not Yet Reviewed
$1,719.00
Weld Racing Alpha-1 Polished Wheels with Single Beadlock
Weld Racing has taken its revolutionary Delta-1 technology to 15 in. sizes with the introduction of the all-new Alpha-1 single beadlock wheels. They feature Weld's exclusive hubless design pioneered and proven in NHRA Pro Stock, Funny Car, and Top Fuel racing. Setting a new standard for lightweight rear drag wheels, Alpha-1 forged aluminum rims are specifically designed for sportsman racers competing in the radial and small tires classes. These wheels are available in a 15 in. diameter, with widths ranging from 8 to 16 in. and in all popular bolt patterns. Additional notes: * 3-piece forged construction * Optimized for weight reduction * Floating hubless design found on the Delta-1 * Forged 6061 single beadlock ring * SFI 15.1 Certified
Not Yet Reviewed
$1,509.00
—
$1,795.00
DIYAutoTune MegaSquirt MS3Pro EVO Standalone Engine Management Systems
DIYAutoTune MegaSquirt MS3Pro EVO standalone engine management systems are scaled up, more capable units due to the shared technology with their big brother, MS3Pro Ultimate. EVO ECUs by AMP EFI do not have peak and hold injector drivers, but they do share some increased I/O, an onboard 4-bar MAP, barometric pressure sensor, and 5 diagnostic LEDs. Whether you're running down the drag strip, the road course, the salt flats, or whatever your racing venue of choice, DIYAutoTune MS3Pro EVO ECUs will deliver winning control. MS3Pro EVO ECUs feature configurable inputs/outputs: * 10 high-impedance injector outputs * 8 logic level spark outputs * 3 PWM outputs * 2 digital outputs * 7 analog inputs, plus built-in MAP, Baro, and internal ECU temperature sensor * 3 high-current digital/pwm outputs * 3 digital frequency inputs * 4 variable reluctor conditioned inputs MS3Pro EVO standalone systems feature: * VE-based tuning * Speed density, Alpha-N, MAF-based tuning and blended algorithms * Up to 12 sequential saturated fuel injector outputs * Up to 12 cylinder sequential support * 2D or 3D table views * The tuner can toggle between 2D or 3D table views with a single click * Individual cylinder fuel and spark trim tables * Table switching * VVT control (4 channels) * Generic wheel decoder allows for support of nearly any standard trigger/aftermarket trigger pattern * Supports 50+ specialty OEM and aftermarket ignition systems using factory cam/crank wheels and sensors * Support for odd-fire and even-fire engines * Capable of controlling even-fire, odd-fire, piston, rotary, and even radial engines * Fuel-only mode--disables ignition output features for control of fuel injection only * Internal SD card high-speed data logging * Traction control multiple strategies * E85 flex fuel sensor input * Long-term fuel trim--OE-style automatic fuel trim to allow for changes in engine over time * High-power time enrichment--allows for richer mixture after extended time in high power * Multiple acceleration enrichment strategies * Nitrous control strategies * 3-step rev limiter with flat shift * Trans-brake and bump box control * Advanced launch control strategies * Pit lane limiter--speed limiter for pit lane, reduces engine power by spark retard/cut or fuel cut; can limit based on VSS or rpm if no VSS input is available * Rally-style turbo anti-lag with rotational idle * Allows cyclic fuel and spark cut * Controls idle valve and configurable outputs for external fuel or air supply * Boost control--multiple open and closed loop strategies * Idle control--multiple open and closed loop strategies * Water and methanol injection * Fuel pump control * Intelligent knock detection and response--two channels * Multiple Engine Protection and fault mode strategies * Generous spare I/O for any standard/custom I/O needs * Air conditioner control with feed-forward idle-up * Cooling fan control--programmable fan on and off activation points; can be configured to run fan with engine running only, or when engine is running and not running * Alternator field control/voltage regulation * Comprehensive Test Modes * CAN Support for I/O expansion--virtually limitless I/O capability * CAN Support for third party dash devices * Android compatible * Self-calibration * Fully enabled * Redundant signal ground wiring * Dual external 5 V ref supplies, individually fused * No dark current * Field upgradeable firmware
Not Yet Reviewed
$1,599.00
—
$1,899.99
DIYAutoTune MegaSquirt MS3Pro Ultimate Standalone Engine Management Systems
DIYAutoTune MegaSquirt MS3Pro Ultimate standalone engine management systems provide unlimited control of your naturally aspirated or forced induction engine with a staggering list of race-focused features that will get you down the track with excellence. MS3Pro Ultimate ECUs by AMP EFI will log up to 64 channels, conservatively, at 200hz, and is ready to support a wide variety of engines out of the box, as well as over 50 different ignition modes. The units also utilize a compact lightweight case design of sealed high-temperature nylon and heavy-duty AMPSEAL connectors to protect sensitive internals. Whether you're running down the drag strip, the road course, the salt flats, or whatever your racing venue of choice, DIYAutoTune MS3Pro Ultimate models will deliver winning control. MS3Pro Ultimate ECUs feature configurable inputs/outputs: * 10 channel 4:1 or 8:2 programmable peak and hold injector outputs * 8 logic level ignition outputs * 6 digital inputs * 5 digital input/output * 5 PWM outputs * 2 digital outputs * 12 analog inputs, plus built-in MAP, Baro, and internal ECU temperature sensor * 3 high-current digital/pwm outputs * 3 digital frequency inputs * 4 variable reluctor conditioned inputs MS3Pro Ultimate standalone systems feature: * VE-based tuning * Speed density, Alpha-N, MAF-based tuning and blended algorithms * Up to 12 sequential saturated fuel injector outputs * Up to 12 cylinder sequential support * 2D or 3D table views * The tuner can toggle between 2D or 3D table views with a single click * Individual cylinder fuel and spark trim tables * Table switching * VVT control (4 channels) * Generic wheel decoder allows for support of nearly any standard trigger/aftermarket trigger pattern * Supports 50+ specialty OEM and aftermarket ignition systems using factory cam/crank wheels and sensors * Support for odd-fire and even-fire engines * Capable of controlling even-fire, odd-fire, piston, rotary, and even radial engines * Fuel-only mode--disables ignition output features for control of fuel injection only * Internal SD card high-speed data logging * Traction control multiple strategies * E85 flex fuel sensor input * Long-term fuel trim--OE-style automatic fuel trim to allow for changes in engine over time * High-power time enrichment--allows for richer mixture after extended time in high power * Multiple acceleration enrichment strategies * Nitrous control strategies * 3-step rev limiter with flat shift * Trans-brake and bump box control * Advanced launch control strategies * Pit lane limiter--speed limiter for pit lane, reduces engine power by spark retard/cut or fuel cut; can limit based on VSS or rpm if no VSS input is available * Rally-style turbo anti-lag with rotational idle * Allows cyclic fuel and spark cut * Controls idle valve and configurable outputs for external fuel or air supply * Boost control--multiple open and closed loop strategies * Idle control--multiple open and closed loop strategies * Water and methanol injection * Fuel pump control * Intelligent knock detection and response--two channels * Multiple Engine Protection and fault mode strategies * Keep Alive Memory (KAM) * Generous spare I/O for any standard/custom I/O needs * Air conditioner control with feed-forward idle-up * Cooling fan control--programmable fan on and off activation points; can be configured to run fan with engine running only, or when engine is running and not running * Alternator field control/voltage regulation * Comprehensive Test Modes * CAN Support for I/O expansion--virtually limitless I/O capability * CAN Support for third party dash devices * Android compatible * Self-calibration * Fully enabled * Redundant signal ground wiring * Dual external 5 V ref supplies, individually fused * No dark current * Field upgradeable firmware
Not Yet Reviewed
$1,749.00
Billet Specialties Comp 8 Polished Wheels with Double Beadlocks
The Billet Specialties Comp 8 polished wheels with double beadlocks are Pro-Level Drag Race wheels. You've probably seen them at the drag strip although it's hard to read the logo during a 6-second pass. Forged from aluminum and engineered for weight savings, the Comp 8 Series wheels are the "real deal". They feature rotary forged centers for incredible strength and precision CNC spun outer rims for unrivaled trueness. The lightweight and scalloped double beadlocks feature an aggressively knurled inner surface to prevent tire slip. These outstanding racing wheels are among the lightest in the sport. Every step of the manufacturing process is optimized to reduce rotational weight where it counts, and they meet SFI requirements. Billet Specialties says, "When battles are won or lost in less than a second ... you better have the right weapon." And their Comp Series of wheels are hard-core drag race-only wheels engineered to get you to the Winner's Circle. Select the Billet Specialties Comp 8 wheels of the ideal size for your drag racer. Drag Race double beadlock rear wheel features: * 2-piece construction * Polished center with machine-finished windows and recess * Polished outer with raw spun finished inner with black anodized beadlock rings * Rotary forged centers for incredible strength and precision * CNC-spun outer rims for unrivaled trueness * For use with mag shank lugs and 5/8 in. race studs * Superior lateral and radial run out * 6061 T-6 forged aluminum centers * Grade 8 hardware * SFI 15.1 certified
Not Yet Reviewed
$1,759.00
—
$1,894.00
Weld Racing Alpha-1 Matte Black Wheels with Double Beadlocks
Weld Racing's Matte Black Alpha-1 Double Beadlock wheels have taken the revolutionary Delta-1 technology to 15-inch sizes. The Alpha-1 features WELD's exclusive hubless design pioneered and proven in NHRA Pro Stock, Funny Car, and Top Fuel racing. Setting a new standard for lightweight drag wheels, the Alpha-1 is specifically designed for sportsman racers competing in the radial and small tires classes. The Alpha-1 is available in a 15-inch diameter with widths ranging from 8 to 16 – inches and in all popular bolt patterns.
( 1 )
$1,825.75
—
$1,987.52
Billet Specialties Comp 8 Black Anodized Wheels with Double Beadlocks
The Billet Specialties Comp 8 black anodized wheels with double beadlocks are Pro-Level Drag Race wheels. You've probably seen them at the drag strip although it's hard to read the logo during a 6-second pass. Forged from aluminum and engineered for weight savings, the Comp 8 Series wheels are the "real deal". They feature rotary forged centers for incredible strength and precision CNC spun outer rims for unrivaled trueness. The lightweight and scalloped double beadlocks feature an aggressively knurled inner surface to prevent tire slip. These outstanding racing wheels are among the lightest in the sport. Every step of the manufacturing process is optimized to reduce rotational weight where it counts, and they meet SFI requirements. Billet Specialties says, "When battles are won or lost in less than a second ... you better have the right weapon." And their Comp Series of wheels are hard-core drag race-only wheels engineered to get you to the Winner's Circle. Select the Billet Specialties Comp 8 wheels of the ideal size for your drag racer. Drag Race double beadlock rear wheel features: * 2-piece construction * Black Anodized center with machine-finished windows and recess * Polished outer with raw spun finished inner with black anodized beadlock rings * Rotary forged centers for incredible strength and precision * CNC-spun outer rims for unrivaled trueness * For use with mag shank lugs and 5/8 in. race studs * Superior lateral and radial run out * 6061 T-6 forged aluminum centers * Grade 8 hardware * SFI 15.1 certified
Not Yet Reviewed
$1,759.00
—
$1,894.00
Billet Specialties Comp 7 Black Anodized Wheels with Double Beadlocks
The Billet Specialties Comp 7 black anodized wheels with double beadlocks are Pro-Level Drag Race wheels. You've probably seen them at the drag strip although it's hard to read the logo during a 6-second pass. Forged from aluminum and engineered for weight savings, the Comp 7 Series wheels are the "real deal". They feature rotary forged centers for incredible strength and precision CNC spun outer rims for unrivaled trueness. The lightweight and scalloped double beadlocks feature an aggressively knurled inner surface to prevent tire slip. These outstanding racing wheels are among the lightest in the sport. Every step of the manufacturing process is optimized to reduce rotational weight where it counts, and they meet SFI requirements. Billet Specialties says, "When battles are won or lost in less than a second ... you better have the right weapon." And their Comp Series of wheels are hard-core drag race-only wheels engineered to get you to the Winner's Circle. Select the Billet Specialties Comp 7 wheels of the ideal size for your drag racer. Drag Race double beadlock rear wheels: * 2-piece construction * Black anodized center with machine-finished windows and recess * Polished outer with raw spun finished inner with black anodized beadlock rings * Rotary forged centers for incredible strength and precision * CNC-spun outer rims for unrivaled trueness * For use with mag shank lugs and 5/8 in. race studs * Superior lateral and radial run out * 6061 T-6 forged aluminum centers * Grade 8 hardware * SFI 15.1 certified
Not Yet Reviewed
$1,759.00
—
$1,894.00
Billet Specialties Comp 7 Polished Wheels with Double Beadlocks
The Billet Specialties Comp 7 polished wheels with double beadlocks are Pro-Level Drag Race wheels. You've probably seen them at the drag strip although it's hard to read the logo during a 6-second pass. Forged from aluminum and engineered for weight savings, the Comp 7 Series wheels are the "real deal". They feature rotary forged centers for incredible strength and precision CNC spun outer rims for unrivaled trueness. The lightweight and scalloped double beadlocks feature an aggressively knurled inner surface to prevent tire slip. These outstanding racing wheels are among the lightest in the sport. Every step of the wheels manufacturing process is optimized to reduce rotational weight where it counts, and they meet SFI requirements. Billet Specialties says, "When battles are won or lost in less than a second ... you better have the right weapon." And their Comp Series of wheels are hard-core drag race-only wheels engineered to get you to the Winner's Circle. Select the Billet Specialties Comp 7 Series wheels of the ideal size for your drag racer. Drag Race double beadlock rear wheel features: * 2-piece construction * Polished center with machine-finished windows and recess * Polished outer with raw spun finished inner with black anodized beadlock rings * Rotary forged centers for incredible strength and precision * CNC-spun outer rims for unrivaled trueness * For use with mag shank lugs and 5/8 in. race studs * Superior lateral and radial run out * 6061 T-6 forged aluminum centers * Grade 8 hardware * SFI 15.1 certified
Not Yet Reviewed
$1,759.00
—
$1,894.00
Weld Racing AlumaStar 2.0 Gloss Black Wheels with Single Beadlock
Weld Racing AlumaStar 2.0 gloss black wheels with single beadlock are premium, high-performance drag racing wheels designed to maximize traction and durability for high-horsepower vehicles. The AlumaStar 2.0's are characterized by their iconic 5-spoke design, lightweight forged aluminum construction, and a secure, bolted beadlock system that prevents tire rotation on the rim. The single beadlock system clamps the outer tire bead to the wheel, which helps prevent the tire from rotating or separating from the rim during extreme, high-torque launches. This is particularly critical for drag radials and slicks at low tire pressures. The gloss black finish provides a modern, aggressive and stylish look that enhances the appearance of any race car. These Weld Racing wheels are SFI 15.2 (or 15.3 certified) and approved for use in all NHRA classes.
Not Yet Reviewed
$1,513.56
—
$1,639.00
