119 Results Found For "cylinder bolts"

Edelbrock Victor 11-Degree CNC LS3 6-Bolt Cylinder Heads

Edelbrock Victor CNC 11-degree 6-bolt LS3 cylinder heads are specifically designed for high-horsepower, naturally aspirated, and boosted applications. Utilizing the popular LS 6-bolt design, they are compatible with the GM LSX block and all aftermarket iron or aluminum 6-bolt per cylinder LS race blocks. The design offers increased clamping capacity over the standard factory 4-bolt configuration and greatly improves head gasket sealing, making them ideal for high-compression naturally aspirated engines and high-boost applications. Edelbrock Victor CNC heads are manufactured with premium materials and machined to the industry's tightest tolerances. They have an 11-degree valve angle, copper infiltrated powder metal valve seats, and fully CNC-machined ports for maximum airflow. The machined runners and chambers, along with the valve angle increase overall flow capability, while the revised water jacket design enhances thermal conductivity and tunability. Premium manganese bronze valve guides withstand long wear with emphasis placed on holding precision tolerances on valve seat concentricity, allowing the valves to seal securely, eliminating leak down and increasing cylinder pressure during engine operation. Finally, the .700 in. thick deck and reinforced rocker rails make these cylinder heads ideal for high-horsepower applications.

Not Yet Reviewed

Edelbrock Head Bolt Kits

Manufactured by ARP, Edelbrock head bolt kits contain a complete set of the highest quality head bolts and hardened washers available. They are cold-formed to ensure molecular integrity and heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal to facilitate cylinder head re-torquing. Hardened and parallel-ground washers are included, and they're rated at 170,000 psi.

Not Yet Reviewed

Trick Flow® GenX® 280 Cylinder Heads for GM LS3

Not Yet Reviewed

Edelbrock Performer Cylinder Heads

All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.

3.88 out of 5 stars ( 41 )

Trick Flow® PowerPort® A460 340 Cylinder Heads for Ford 429/460

Trick Flow's potent PowerPort® A460 340 cylinder heads for Ford 429/460 are ideal for use in drag racing, monster trucks, tractor pulling, and other ultra-high power, large cubic inch engine combinations. Fast As Cast® runners precisely duplicate the port shape and profile of CNC-ported heads, delivering near-CNC-ported airflow, power, and performance for about the same price as regular cast cylinder heads. Other features include big block Chevrolet-style exhaust port openings and bolt pattern and your choice of standard or heavy duty 18-bolt mounting patterns. Trick Flow PowerPort A460 340 cylinder heads are available fully assembled or as bare castings. Sold individually.

Not Yet Reviewed

Brodix Cylinder Heads Race-Rite Oval Port Cylinder Heads for Big Block Chevy

Brodix Cylinder Heads Race-Rite oval port cylinder heads for big block Chevys bolt on directly in place of your stock heads, so you can reuse your intake manifold and pistons. Because the stock exhaust ports are in the stock location, you don't have to worry about header or manifold interference. These aluminum heads are great for street and strip applications. They feature 119cc combustion chambers, air conditioner bracket holes, solid phosphorous bronze guides, high-torque 270cc intake ports, a fully machined valve cover rail, and bulletproof rocker stands.

4.36 out of 5 stars ( 25 )

Trick Flow® PowerPort® 175 Cylinder Heads for Ford 390-428

Give your Ford 390-428 more get-up-and-go with Trick Flow PowerPort® 175 cylinder heads. A direct bolt-on for all 1961-76 FE engines, the heads are made from top-quality A356-T61 aluminum so they're much lighter but still as strong as OE castings. Specially optimized intake runners increase airflow velocity, and Trick Flow's extraordinary CNC Street Ported treatment guarantees proper dimensional accuracy and balance between the runners. Other performance improvements of the PowerPort175® heads include bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seat machining on SerdiR equipment. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, 7 or 10 degree steel valve stem locks, and chromoly or titanium retainer options. The heads are available fully assembled or as bare castings. Sold individually.

4.89 out of 5 stars ( 9 )

Edelbrock Performer RPM Cylinder Heads

Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.

4.21 out of 5 stars ( 170 )

Trick Flow® PowerPort® A460 360 Cylinder Heads for Ford 429/460

Trick Flow® potent PowerPort® A460 360 cylinder heads for Ford 429/460 are ideal for use in drag racing, monster trucks, tractor pulling, and other ultra-high power, large cubic inch engine combinations. The heads have CNC Competition Ported runners with Trick Flow® top-of-the-line, premium high resolution surface finish for maximum airflow and performance in all-out naturally aspirated or forced induction applications. Other features include big block Chevrolet-style exhaust port openings and a heavy duty 18-bolt mounting pattern for superior gasket retention. Trick Flow® PowerPort A460 360 cylinder heads are available fully assembled or as bare castings and are sold individually.

5.0 out of 5 stars ( 2 )

Trick Flow® GenX® 255 HD Cylinder Heads for GM LS3

Trick Flow® GenX® 255 HD cylinder heads offer an unbeatable combination of performance and durability, making them the perfect upgrade for your high-performance GM LS3 engine build. Assembled with Manley Severe Duty stainless steel valves, these heavy-duty versions of the standard GenX® 255 heads can withstand the added heat, stress, and abuse dealt by big power adders. That makes them the ideal choice for engines using superchargers, turbochargers, or nitrous. GenX 255 HD cylinder heads have fully CNC-profiled combustion chambers and CNC Competition Ported square port runners with a premium high resolution surface finish that guarantees dimensional accuracy and balanced flow from port-to-port for maximum power potential. The valve angles have been modified from the stock 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head decks were designed to ensure compatibility with all LS head gasket and engine block combinations. The 6-bolt-per-cylinder mounting pattern for GMPP LSX and other aftermarket blocks increases clamping force to prevent head gasket failure, cylinder distortion, and other issues that plague the factory 4-bolt design. Trick Flow® GenX® 255 HD heads have LS3 port locations to work with all LS3-style intake manifolds and LS9/LSA blower assemblies. They must be used on engines with 4.000" or larger bores. Cylinder heads are available fully assembled or as bare castings. Sold individually.

Not Yet Reviewed

Edelbrock Performer RPM 348/409 Chevy Cylinder Heads

Edelbrock Performer RPM 348/409 Chevy cylinder heads have been specifically designed for the 1961-65 Chevy W Series 348/409 big block engines. These Performer RPM heads feature aluminum construction with original port locations and valve angles for bolt-on convenience. The CNC port-matched 220cc intake runners and 90cc exhaust ports optimize flow and power throughout the entire rpm range. With their new, improved port design, the Edelbrock Performer RPM 348/409 Chevy cylinder heads are sure to add some easy bolt-on horsepower to your engine.

5.0 out of 5 stars ( 1 )

Edelbrock E-205 Cylinder Heads

You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.

3.5 out of 5 stars ( 2 )

Summit Racing™ Precision Cast Cylinder Head

Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!

4.0 out of 5 stars ( 19 )

Chevrolet Performance Bowtie Aluminum Cylinder Heads

Chevrolet Performance Bowtie aluminum cylinder heads offer an ideal combination of street drivability and drag-strip performance. These aluminum cylinder heads provide a broad power range with ample low-end torque, along with excellent throttle response, good mid-range torque and enough top-end power to beat your competitors to the finish line. Designed for high performance applications, the Bowtie Street cylinder heads are manufactured to precise machining tolerances, with thick deck surfaces and high-velocity airflow passages. They are available in either rectangular or oval intake port configurations. The rectangular intake ports are larger in volume and have been designed to enhance high-rpm horsepower, which makes them best for vehicles that see frequent drag-strip action. Cylinder heads with oval intake ports are smaller in volume and designed for greater low-rpm torque, therefore they're best for street applications, where lots of bottom end, off-the-line power is desired. Bowtie Street Cylinder Head Technical Notes: * Made from 356-T6 aluminum * Available in rectangular or oval-port designs * Will work on Mark IV and Gen V, VI blocks * 9/16 in. thick decks * As-cast intake and exhaust ports * No heat risers * 1.55 in. valve spring seat diameter * Heli-coiled 7/16 in. screw-in rocker stud holes * Designed for use with 3/8 in. pushrods * Use intake gasket P/N 12366985 and bolt kit P/N 12367959 * Use head gasket P/N 12363414 for bores to 4.370 in. and P/N 12363413 for bores 4.470 in. to 4.540 in. (Mark IV) * Use head gasket P/N 12363412 for bores to 4.370 in. and P/N 12363411 for bores 4.470 in. to 4.540 in. (Gen V, VI) * Use head bolt kit P/N 12367779 Bowtie Oval-Port Aluminum Cylinder Head Assembly: * Completely assembled with 2.250 in./1.880 in. 11/32 in. stem valves * 290cc oval intake ports * 110cc exhaust ports * 110cc combustion chambers Cylinder head is assembled with the following components: * 2.190 in. intake valves * Valve spring retainers * 1.880 in. exhaust valves * Valve locks * Valve springs * Valve seals * Valve spring shims * Rocker arm studs * Pushrod guideplates

Not Yet Reviewed

Edelbrock Performer RPM Chrysler Gen III HEMI Cylinder Heads

Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads are bolt-on performance upgrades for Gen III HEMI engines. They are designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers, spark plugs, and accessories, as well as Hellcat components. The cylinder heads have been machined to be used on either the driver or passenger side of the block. They are cast from A356 aluminum and are heat-treated to T6 specifications. Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads feature fully CNC-machined combustion chambers, along with CNC-profiled bowls and port entries/exits for improved airflow. They also feature more material in the deck and reinforced combustion chambers for increased cylinder pressures. The rocker bosses have been reinforced for improved stability and strength, and extra material has been added around the intake and exhaust ports to allow for porting in racing applications. Both the intake and exhaust port flanges have remained in the factory location for use with OEM components. The intake and exhaust valves have been tipped away from the bore wall to unshroud the larger valves, while maintaining factory geometry. The seat diameters have also been increased for improved heat transfer and durability over stock.

5.0 out of 5 stars ( 3 )

Edelbrock Victor LS-R Pro-Port Cylinder Heads

Edelbrock Victor LS-R Pro-Port cylinder heads are hip to racing! These bare heads are designed to maximize the potential of your race-oriented LSX block. They are processed with a technique called Hot Isostatic Pressing (HIP) that results in an incredibly strong, super-dense casting with three times the fatigue life! These un-ported versions of the Edelbrock Victor series heads are cast in the USA with extra-thick walls to accommodate professional custom CNC porting. A true canted valve design offers the utmost in port flow and combustion efficiency with a 2-valve design. And, these Victor LS-R bare heads use the GM SB2 valve cover footprint required by the added width of the canted valve layout. The stock exhaust bolt pattern is retained and magnesium-bronze valve guides are included, but not installed. Get hip to Edelbrock Pro-Port and their Victor LS-R bare cylinder heads.

Not Yet Reviewed

AFR 180cc SBC Eliminator Street Heads

AFR 180cc SBC Eliminator street heads are available in your choice of straight or L98 angle plug versions. These cylinder heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight, 8mm, and have a 2.020 in. intake and 1.600 in. exhaust with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. These heads' exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make them the perfect street heads for 327 to 350 c.i.d. engines in the idle to 5,500 rpm operating range (higher rpm ranges are possible, depending on the combination of parts). Eliminator cylinder heads carry CARB E.O. #D-250-2 when used on 1969-94 applications with the heat riser. They're also available for your 1987 and later engines with centerbolt valve covers and two center intake bolts at 72 degree angles; Vortec-style cylinder heads are available, too. Their dual valve cover bolt pattern is standard and their exhaust port is raised .100 over GM L98 cylinder heads.

4.78 out of 5 stars ( 9 )

Trick Flow® Twisted Wedge® 11R 227 Cylinder Heads for Small Block Ford

Twisted Wedge® 11R 227 cylinder heads represent Trick Flow's ultimate development of the Twisted Wedge® innovation, featuring Trick Flow's most efficient combustion chamber design. The combustion chamber and valve layout move the intake valves away from the cylinder walls to reduce valve shrouding, significantly improving flow at higher lift. Shallow 11° intake/13° exhaust valve angles improve piston-to-valve clearance for high lift cams and reduce chamber volume for improved compression and efficiency. High velocity runners are optimized on the flow bench and dyno proven to outperform the competition on hydraulic roller camshaft engines. Premium materials and components, along with world-class CNC processes, guarantee uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. Machined castings increase strength and have a billet-like appearance. Additional features include CNC-profiled combustion chambers, 2.080"/1.600" stainless steel intake/exhaust valves, Trick Flow® by PAC Racing valve springs, and titanium retainers. Twisted Wedge® 11R 227 heads have CNC Competition Ported runners with a premium high- resolution finish for ultimate performance. Cylinder heads are available fully assembled or as bare castings. Sold individually. Key Features: • 227cc intake ports and 56cc or 66cc combustion chambers • 2.080 in. stainless steel intake valves • 1.600 in. stainless steel exhaust valves • .625" thick deck • Titanium retainers • 11 degree intake valve angle • 13 degree exhaust valve angle

Not Yet Reviewed

Ford Performance Parts Super Cobra Jet Cylinder Heads

Ford Performance Parts teamed up with Jon Kaase to redesign their 429 Cobra Jet cylinder heads, and the results are these Super Cobra Jet heads. They feature revised valve angles and locations to reduce cylinder wall shrouding and improve flow, along with redesigned combustion chambers to accommodate the more centrally located valves. These heads use the same valves, valve springs, retainers, and 7/16 in. stud-mounted roller rockers as the current Ford Performance Parts 429 Cobra Jet heads, and the standard Cobra Jet intake and exhaust manifolds bolt right on. This new design offers a 25-50 HP increase over current Cobra Jet heads, depending upon displacement and camshaft.

4.62 out of 5 stars ( 13 )

Edelbrock E-Street Cylinder Heads

Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.

4.29 out of 5 stars ( 119 )

Summit Racing™ Gen III Hemi MDS Delete Kits

Wanting to deactivate the Multi-Displacement System of your Hemi vehicle will require a few things, including a non-MDS camshaft and components. Summit Racing™ Gen III Hemi MDS delete kits are offered in versions designed for engines with or without Variable Valve Timing (VVT). They contain premium components (except programmer) to help you complete the job. Each Summit Racing™ delete kit will include a head gasket set, timing cover gasket, non-MDS lifters, replacement cylinder head fasteners, non-MDS solenoid plug, and camshaft, along with valve springs and/or camshaft phaser limiters. Choose the combo designed for your vehicle.

4.5 out of 5 stars ( 2 )

Trick Flow® PowerPort® 270 Cylinder Heads for Big Block Mopar

Trick Flow® PowerPort® 270 Max Wedge-style cylinder heads will significantly improve the power of your big block Mopar right out of the box. How? Well for starters, PowerPort® 270 heads are made from premium grade A356-T61 aluminum. That's important because it weighs a lot less than cast iron and is very strong. Trick Flow® engineers fixed the shortcomings of the factory head design by relocating the oil holes for the rocker shafts and optimizing the shape of the runners to increase flow velocity and add much needed strength to the shaft bosses. PowerPort® 270 heads also feature larger, raised Max Wedge-style intake runners that provide a straighter path to the valve for improved airflow. The runners are treated to Trick Flow's® signature high resolution CNC Competition Ported surface finish that guarantees proper dimensional accuracy with balanced flow from runner-to-runner for maximum power potential. Additional advantages of PowerPort® 270 heads include clearance for 3/8 in. pushrods, ductile iron valve seats, bronze alloy valve guides, and multi-angle valve seat machining on precision Serdi® equipment. Assembled cylinder heads come with premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, chromoly and titanium retainer options, and 7 or 10-degree steel valve stem locks. They are available fully assembled or as bare castings. Sold individually. Since swapping cylinder heads can be a costly and time-consuming process, Trick Flow® designed the PowerPort® 270 heads to use all factory-style big block Mopar pistons. They also are manufactured to accept aftermarket roller rocker arms, and headers. A Max Wedge-style intake manifold is recommended for best performance.

4.92 out of 5 stars ( 12 )

Trick Flow® PowerPort® Cleveland 225 Cylinder Heads for Ford 351C, 351M/400 and Clevor

Designed for high performance street/strip engines! Trick Flow® PowerPort® Cleveland 225 cylinder heads feature runners based on the OE Ford 2V design. The heads feature fully CNC competition ported runners with a premium high resolution surface finish for maximum, all-out performance The exhaust runners are raised .100" from the stock location to improve the short turn radius and dramatically improve exhaust flow, and a revised oil return system improves oil drain back and includes provisions for mating with Ford 351W blocks. PowerPort Cleveland 225 cylinder heads fit Ford 351C, 351M, and 400M engines out of the box. With minor machining, the heads also fit Ford 302/351W blocks to create a "replica" Boss 302 or a 351 "Clevor" engine. The heads are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 6 )

Edelbrock E-210 Cylinder Heads

Step up to race-level performance with OEM compatibility using these Edelbrock E-Series E-210 aluminum cylinder heads. They feature larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts--perfect for spec series racers and large-displacement engines. Available bare or assembled, E-210 cylinder heads allow you to use off-the-shelf headers and hardware. Forget those overseas castings; go with quality, economy, and performance. Go with Edelbrock E-Series E-210 cylinder heads.

4.92 out of 5 stars ( 13 )