Availability
Not all multi-disc converters are created equal, and with BD Diesel's Triple Torque Force, less is more. To start, BD's in-house CNC-machined cover is designed as one piece, which prevents warping, improper balancing, and leakage. With this design, BD was able to maintain the factory height, thus eliminating the crowding of the pump and the possibility of premature wear. BD Diesel has engineered the dampener for better balancing by riveting it in place, eliminating welding, which can cause warping and affect balance. Each dampener spring is hand-picked to ensure softer engagement. They added notches to the clutch material to prevent fluid adhesion, thus ensuring that even in fluid coupling, the clutches will always have lube. They offer tighter engineered tolerances and a self-centering, 36-external/32-internal, trapezoid-shaped clutch tooth design that enables more contact surface to ensure that the clutch plates properly align, resulting in less friction wear, a longer converter life cycle, and firmer drivability. The clutch plates are also precision-ground flat for smooth operation and consistent wear. Not only will these converters last longer, but they also have 3 times the torque-holding capacity! Triple Torque Force converters come with BD's engineered cast aluminum X-Stator that has fin lengths, angles, and curvatures that are designed to deliver a fluid coupling engine rpm transfer of up to 95 percent, vs. 75 percent with stock stators. This efficiency reduces engine temperatures, increases fuel economy, and better matches the torque curve of the engine, resulting in more torque and horsepower being delivered to the ground. The overall weight of the BD Diesel Triple Torque Force converters has been reduced by 12 lbs. compared to the competition, resulting in better fuel economy and less wear and tear.
( 2 )
$1,624.95
ATS Diesel Performance Five Star torque converters bring top-of-the-line technology and performance to your rig. Their efficient design features innovative fluid-assist technology and a unique 5-disc setup that provides 100 percent mechanical bond during lock-up to ensure no plate slippage. Optimal stall speed and maximum torque multiplication create better performance, higher fuel economy, and unsurpassed reliability. Order the model recommended for your transmission application. Product features: * Hardened pump drive hub * Furnace-braised impeller veins * Proprietary mixed-flow stator * Internally balanced turbine * Billet pistons * Patented Viskus clutch drive with square tab lugs * Patented 2-piece construction * Exclusive 12-bolt cover design * Patented square lug design * Billet cover
Not Yet Reviewed
$1,509.99
—
$1,649.99
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 27 )
$1,521.99
ATS heavy-duty billet torque converters match your first generation Cummins-powered Dodge truck's torque curve with the power needed for street, towing, and performance applications. These converters feature the patented ATS square flank drive design, proprietary clutch material, CNC-cut steels, redesigned stators, Torrington bearings, and stall speeds perfectly mated to your Cummins engine. ATS heavy-duty, non-lockup billet converters completely eliminate the weaknesses of your factory converter and deliver more power to the ground, lower temperatures, and greater overall performance. Features include: * Improved vehicle response * Minimized slip * Improved towing and drivability * Increased reliability * Withstands higher torque loads * Custom stator with high-flow windows * Redesigned spring dampener * Plasma welded for unsurpassed strength * Hardened turbine splines * Unique bonding technology for 100 percent chemical bond (an ATS exclusive) * Note: Must be used if installing a billet flexplate
Not Yet Reviewed
$1,754.99
Unleash the power of your diesel engine! Hughes Performance extreme towing diesel torque converters are designed to handle the big power and torque that your engine puts out. They feature extra brazing for increased strength, heavy-duty bearings for greater torque capacity, a triple disk lockup clutch for greater towing capacity, stator modifications for increased torque multiplication, and a billet cover to eliminate converter bow distortion.
( 6 )
$1,868.99
RevMax offers Stock Stall Stage 5 billet torque converters for a variety of Dodge, RAM, Chevrolet, and GMC trucks with Mopar, Allison, or Aisin-Seiki transmissions from the 1990s and up. They're designed for those who have heavily modified engines or for those who tow heavy weights. * Details for Mopar and Allison applications: The showpiece of these converters is the RevMax patented torque converter stator sprag retainer. This technology cannot be purchased anywhere else! Unlike most of the competition, RevMax has redesigned the lockup clutch piston to be able to accommodate a piston damper. The billet piston and damper allow the clutch to apply smoother—which in turn puts far less strain on the input shaft. RevMax Stage 5 converters have no horsepower or torque limitations. They're available for a variety of applications, including many Dodge and RAM trucks from the 1990s and up with Mopar transmissions. * Details for Aisin-Seiki applications: Aisin-Seiki converters are the culmination of over three years of R&D. Inside, RevMax has completely redesigned these converters, replacing the factory lockup piston with a billet-oversized version. In addition, the converters feature SIX lockup clutches and retain the factory damper assembly to provide extremely smooth converter apply. Product features: * CNC-machined billet one-piece front cover * Raybestos or Alto, high performance triple disc lockup frictions (Mopar and Allison) -- Raybestos or Alto, high performance SIX disc lockup clutch design (Aisin-Seiki) * Billet lockup apply piston with performance spring damper (Mopar and Allison) -- Billet apply piston (Aisin-Seiki) * RevMax proprietary CNC-machined stator designs * RevMax patented sprag retainer (not on Allison or Aisin-Seiki models) * RevMax proprietary input shaft seal (not on Allison or Aisin-Seiki models) * Billet bearing cap * Dual Torrington Bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak-tested * TCRS computerized high-speed balancing to less than 5 gram * Runout tolerances of less than .005
Not Yet Reviewed
$1,649.00
—
$1,995.00
RevMax Low Stall Stage 5 triple-disc billet torque converters are designed for those who have heavily modified engines or for those who tow heavy weights. The showpiece of these converters is the RevMax patented torque converter stator sprag retainer (some models). This technology cannot be purchased anywhere else! Unlike most of the competition, RevMax has redesigned the lockup clutch piston to be able to accommodate a piston damper. The billet piston and damper allow the clutch to apply smoother—which in turn puts far less strain on the input shaft. RevMax Stage 5 converters have no horsepower or torque limitations. They're available for a variety of applications, including many Dodge, RAM, Chevrolet, and GMC trucks with Mopar or Allison transmissions from the 1990s and up. Additional details: * CNC-machined billet one-piece front cover * Raybestos or Alto, high performance triple disc lockup frictions * Billet lockup apply piston with performance spring damper * RevMax proprietary CNC-machined stator designs * RevMax patented sprag retainer (not on Allison models) * RevMax proprietary input shaft seal (not on Allison models) * Billet bearing cap * Dual Torrington Bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak-tested
Not Yet Reviewed
$1,649.00
TCI Maximizer high-torque towing converters are efficient units that put more of your engine's torque to the ground. Slippage is minimized, providing better gas mileage and as much as a 20-degree F reduction in transmission temperature. Another benefit is reduced engine rpm at highway speed. These torque converters are available in a variety of size options for more than a dozen Chevy, Ford, and Mopar transmission models.
( 20 )
$1,639.95
Summit Bucks
ACDelco new torque converters are GM OE replacements that offer the same performance, durability, and service life you've come to expect. With quality steel housings and internal components, ACDelco torque converters are sure to deliver the performance and fit needed for your vehicle.
( 1 )
$1,726.99
Whether you need a better than stock replacement torque converter or a full-blown sled pulling converter, RevMax has you covered! RevMax medium-high stall Stage 5 torque converters have a triple disc billet design for those who have a heavily modified engine or tow heavy weights. They are made with a CNC-machined billet one-piece front cover, high performance lockup frictions, RevMax patented sprag retainer-billet bearing cap, and dual Torrington bearing stator design. A billet piston and damper allow the clutch to be applied smoother, putting far less strain on the input shaft. These medium-high stall Stage 5 torque converter's triple disc design operates as well as the original, with no horsepower or torque limitations. Features and benefits: * Raybestos or Alto, high performance lockup frictions * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Fully pressurized and leak tested * TCRS computerized high-speed balancing to less than 5 grams * Runout tolerances of less than .005 * Assembled in Charlotte, NC by highly trained technicians * 2-year unlimited mileage warranty
Not Yet Reviewed
$1,649.00
Whether you need a better than stock replacement torque converter or a full-blown sled pulling converter, RevMax has you covered! RevMax ultra-high stall Stage 5 torque converters have a triple disc billet design for those with heavily modified engines and tow heavy weights. They are made with a CNC-machined billet one-piece front cover, high performance lockup frictions, RevMax patented sprag retainer-billet bearing cap, and dual Torrington bearing stator design. A billet piston and damper allow the clutch to apply smoother which puts far less strain on the input shaft. The ultra-high stall Stage 5 torque converter's triple disc design operates as well as the original with no horsepower or torque limitations. Features and benefits: * Raybestos or Alto, high performance lockup frictions * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Fully pressurized and leak tested * TCRS computerized high-speed balancing to less than 5 grams * Runout tolerances of less than .005 * Assembled in Charlotte, NC by highly trained technicians * 2-year unlimited mileage warranty
Not Yet Reviewed
$1,649.00
RevMax Stage 5 billet triple disc torque converters are designed for those who have heavily modified engines or for those that tow heavy weights. The use of their billet piston inside the converter allows the clutch to apply fully without flexing. Even with this piston, these triple disc converters are nearly as smooth as your original stock single disc. All Revmax Stage 5 converters have no horsepower or torque limits—they dare you to break them! Give your ride the powertrain it deserves with an assist from the RevMax Stage 5 billet triple disc torque converter best suited for your application. More product features, items, and specifications include: * CNC-machined billet one-piece front cover * Raybestos or Alto high-performance triple-disc lockup friction * Billet lockup apply piston * Proprietary CNC-machined stator designs * Billet bearing cap * Dual Torrington bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace-brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak tested * TCRS machine computerized high-speed balancing to less than 5 grams * Runout tolerances of less than 0.005 in.
Not Yet Reviewed
$1,549.00
RevMax Ultra Low Stall Stage 5 triple-disc billet torque converters are designed for those who have heavily modified engines or for those that tow heavy weights. The showpiece of these converters is the RevMax patented torque converter stator sprag retainer. This technology cannot be purchased anywhere else! Unlike most of the competition, RevMax has redesigned the lockup clutch piston to be able to accommodate a piston damper. The billet piston and damper allow the clutch to apply smoother—which in turn puts far less strain on the input shaft. RevMax Stage 5 converters have no horsepower or torque limitations. They're available for a variety of applications, including many Dodge and RAM trucks with Mopar transmissions from the 1990s and up. Additional details: * CNC-machined billet one-piece front cover * Raybestos or Alto, high performance triple disc lockup frictions * Billet lockup apply piston with performance spring damper * RevMax proprietary CNC-machined stator designs * RevMax patented sprag retainer * RevMax proprietary input shaft seal * Billet bearing cap * Dual Torrington Bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak-tested * TCRS computerized high-speed balancing to less than 5 gram * Runout tolerances of less than .005
Not Yet Reviewed
$1,649.00
Chevrolet Performance torque converters offer a precise fit for ease of installation, along with trouble-free consistent performance in your GM vehicle. Meeting original equipment standards and designed specifically for your vehicle, Chevrolet Performance torque converters are the perfect replacements to properly maintain your Chevrolet, Buick, GMC, or Cadillac.
( 4 )
$1,520.99
BMR Level 2 drag race suspension packages include the right components for serious race car applications and have been track-tested on multiple cars deep into the 7-second zone at the dragstrip. They are available in your choice of black hammertone or red powdercoated finishes. The packages are designed to get the most traction possible, help transfer the maximum amount of power to the ground, and provide quicker 60 ft. times and better, more consistent overall elapsed times.
( 3 )
$1,659.00
TCI Circlematic automatic transmissions are great for oval track use. However, despite the sound of their name, they also can be used for performance marine applications. All transmissions feature high performance clutches, a steel clutch hub, and a modified planetary gear set that will work with the latest rear suspensions. Many specialty combinations are available.
Not Yet Reviewed
$2,177.95
—
$2,233.95
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 26 )
$1,609.00
—
$1,747.95
OTC Strut Tamer II Extreme spring compressors supply the strongest compression force—up to 4,000 lbs. to compress and rebuild large truck, SUV, and passenger car shock/strut assemblies. They also set a standard for safety, meeting the new ASME PASE safety standards for spring compressors. Safely compress the largest strut springs with OTC Strut Tamer II Extreme. They are available with or without stand. Features include: * Forged locking jaws includes larger pads and offset to clamp onto and compress springs even tighter than before * Extra-thick 5/8 in. compression arms for superior strength, stability, and safety * Locking trunions for optimal stability during spring compression * Arm-locking rings eliminate the need for tools to adjust * 2:1 reduction gearbox allows for a 2:1 torque compression increase when compressing struts * Spring capacity of 2 1/2 in. to 10 in. diameter; 1 1/4 in. to 24 in. vertical stroke * Stand with wheels for easy mobility in the shop (ST model only) * During compression, the stand's wheels lift off the floor, and four no-slip rubber pads keep the stand firmly in place
( 1 )
$1,534.99
—
$1,955.99
On Sale
Hooker introduces the RacingHeart 3-Step Dragster headers. The big block Chevy downswept headers feature 2.125 in./2.25 in./2.375 in. stepped primary tubes and 4.5 in. collectors with merge spears to maximize exhaust flow—resulting in horsepower and torque gains over a broad rpm range. RacingHearts are available in chrome plated mild steel or polished 304 stainless steel. Product details: * Collectors feature merge spears for increased exhaust velocity * 3/8 in. thick header flanges for strength and maximum sealing surface * Features bungs for Evac systems (Evac tubes and plugs included)
( 1 )
$1,692.95
$1,522.95
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,551.25
—
$2,006.00
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$1,513.50
—
$1,747.95
Centerforce DYAD XDS twin disc clutch kits feature a patented centrifugal weight system (where applicable) for superior clamp load over stock. Every kit is equipped with a lightened billet steel flywheel—providing low inertia and resulting in quicker rpm. All components are match-balanced and ready for installation using ARP fasteners. Order the kit designed for your specific vehicle. Centerforce DYAD XDS twin disc clutch kits may feature: * No complicated setup or adjustments * Race-proven paddle-style discs * Quiet, positive drive floater * Great drivability and light pedal effort * Excellent driver control * Specification card * Greater longevity * Holds 400 to 1,600 lbs.-ft. of torque at the flywheel * Fully dampened clutch system developed for vehicles with extreme power levels
( 1 )
$1,816.95
—
$1,994.95
Thanks to their unique, unmatched muffler technology, the drone busters at Corsa Performance have created the ideal exhaust systems for you. Corsa Xtreme exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. Corsa Xtreme exhaust systems are manufactured from premium stainless steel with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right, Corsa exhausts go on fast with no cutting or welding.
( 132 )
$1,599.99
—
$2,180.99
Stainless Works CNC mandrel-bent exhaust systems are the simply the best for improving your vehicle's performance, sound, and mileage. Made of high-grade 304 stainless steel, they offer an array of options to unleash more torque and horsepower while delivering the sound your vehicle has been lacking. Most are designed to use factory hangers. Stainless Works not only offers their Factory Connect option that mates to a factory connection point, but also Performance Connect options for many models. Performance Connect gains more performance than factory connection points allow, and they require the installation of Stainless Works headers (sold separately) to gain the full performance benefit. Stainless Works also builds their mufflers entirely of stainless steel. They will never "burn in," "blow out," or change their tone—ever. Choose from a selection of universal or application-specific muffler designs, including turbo chambered (loud), chambered round (louder—can be reversed for an even more aggressive sound), and turbo S-tube (loudest—may be too aggressive for a daily driver). Additional features of Stainless Works CNC mandrel-bent exhaust systems include: * 304 stainless will never red-rust like cheaper 409 stainless * TIG-welded for strength * Durable 3/8 in. thick flanges * Mandrel-bent (no buckling) for optimal flow * Variety of tip options (varies by application) * Truck exhausts available with three exit locations: behind the passenger tire; under the rear bumper (one on each side); and in front of the passenger tire * Install-Ready; all systems come with all necessary parts to make installation as smooth as possible
( 30 )
$1,520.95
—
$1,954.15
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
