Availability
American Racing Dodge Challenger headers are designed to work with ARH's header X-pipe system to handle the huge power of modern Mopar engines, even supercharged applications. Available with or without catalytic converters, these Dodge Challenger headers are offered in a variety of primary sizes and collector diameters to splice into your factory or aftermarket exhaust. Additional features of American Racing Headers Dodge Challenger headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * The only headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only
( 1 )
$1,927.74
—
$2,173.90
On Sale
Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.
( 272 )
$1,799.95
$1,618.95
—
$2,099.95
On Sale
Clearance
Corsa Sport exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. The robust, aggressive-sounding Corsa Sport exhaust systems are manufactured from premium stainless steel, with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right every time, Corsa exhausts go on fast--no cutting or welding is necessary.
( 289 )
$2,433.99
$1,522.50
—
$2,070.99
SPEC Super Twin multi-disc clutch and flywheel kits are designed for street and track use in vehicles with extreme horsepower and torque (700 to 1500 lbs.-ft.). They offer near-stock drivability, tremendous life expectancy, a no shimming/setup bolt-in installation, and maintenance-free operation. With their all-billet construction, these assemblies are smooth and quiet. Super Twins are constructed with aircraft-grade aluminum and high-carbon billet steel milled to industry-leading .001 in. tolerances for perfect balance and actuation. Friction is provided by dampened, full-faced, carbon-graphite discs. Additional features of SPEC Super Twin multi-disc clutch and flywheel kits: * Organic, fiber, and full-metallic versions are also available * Flywheel and track-spec hardware are included in each kit * Rebuildable by SPEC or the end-user * Replacement components are always available * Ideal for all types of use, including: street, drag racing, drifting, road racing, time-attack, pulling, and rally
( 3 )
$1,592.10
—
$1,979.10
Stainless Works Legend Factory Connect exhaust systems with X-pipes will improve the sound and performance on your ride. Stainless Works has engineered a drone-free aggressive muffler tuned specifically for your car's V8 engine. In addition to the tuned mufflers, they've also utilized 3 in. tubing in their X-pipe crossover for an improvement in flow over the stock exhaust. Finishing the system, Stainless Works employs polished or matte black quad tips with a double-wall beveled style. Stainless Works Legend systems are built from corrosion-resistant 304 stainless steel and are TIG-welded in their state-of-the-art facility. Features and benefits include: * Legend System is designed for the daily driver * Factory Connect—necks down at factory connection point * 3 in. mandrel-bent tubing * Tuned mufflers for aggressive muscle car sound * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$2,111.85
If raw and rowdy are your speed, AWE Tuning Track Edition exhaust systems will satisfy your desires. These aggressive sounding systems are offered in handcrafted and CNC mandrel-bent T304L stainless steel cat-back and cost-effective axle-back options. Each system is completed with adjustable tips (allows depth into the bumper to be set according to personal taste) in chrome or diamond black. AWE Tuning Track Edition exhaust systems are not for the faint of heart and cannot be returned due to sound preference. Choose your AWE Track exhaust wisely!
( 2 )
$1,545.00
—
$1,805.00
AWE Tuning Touring Edition exhaust systems deliver a bolt-on design with AWE's proprietary straight-through drone-canceling solution--180 Technology that cancels out problematic frequencies, leaving only unlocked performance and AWE's signature note. These sophisticated, more civilized exhausts are handcrafted and CNC mandrel-bent from T304L stainless steel, finished with tips in chrome silver or diamond black, and offer premium performance for a variety of vehicles—domestic and import. Order the preferred exhaust designed for your vehicle.
( 5 )
$1,545.00
—
$1,910.00
Direct-fit BBK full-length headers will help your vehicle produce extra horsepower. Constructed from heavy 14-gauge, mandrel-bent tubing with 3/8 in. thick die-stamped flanges, these headers come in your choice of coated finishes. Gaskets and mounting hardware are included. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 107 )
$1,669.99
—
$1,749.99
Stainless Works Redline factory connect exhaust systems are fabricated to get the most aggressive growl out of your engine, while eliminating any cabin drone. These 3 in. stainless steel cat-back systems are available in passenger side or split rear exit location styles, depending on application. Unleash more torque, horsepower, and the fiercest growls your vehicle has been holding back with a Stainless Works Redline factory system. Order the kit recommended for your specific vehicle and engine size. Features, parts, and specs may include: * Drone-free aggressive dual mufflers * Designed to fit to the factory connection point * Corrosion-resistant 304 stainless steel * TIG-welded * Exits out at factory location * Dual slash-cut double wall tips (depending on application) * Mates to OEM tips (depending on application) * Lifetime warranty on materials and craftsmanship
( 2 )
$2,111.85
Quick Time Performance Screamer exhaust systems feature dual-mode mufflers with a single inlet to a dual outlet. One outlet is a straight pipe with a valve at the end. When the valve is open, you get the loud and free-flowing exhaust system. Close the valve, and the exhaust gases are diverted though the muffled section to get a quiet, mild-mannered sound. Screamer is the only exhaust system that you can control from the driver's seat—get the power and sound that you desire at the flip of a switch! Order the model designed for your vehicle.
Not Yet Reviewed
$2,019.94
AMP Research PowerStep Xtreme running boards have been designed for those owners who live, work, and play in challenging environments. Their dual motors deliver more power when deploying and retracting, while the integrated LED lights illuminate the boards when deployed, so you'll know right where you're stepping. Features include: * High-strength, diecast aluminum alloy linkage arms are anodized and PTFE coated to resist corrosion * Precision, zero-maintenance stainless steel pivot pins * Extruded aluminum steps with a textured powdercoated finish * Weatherproof, OEM-quality electric motors and wiring harness with sealed weathertight connectors * AMP-designed electronic controller employs pressure-sensitive, pinch-proof safety technology * 600 lbs. load capacity
( 4 )
$2,199.99
—
$2,299.99
Go Rhino Element front bumpers feature modern styling that dramatically improves factory appearance, provides off-road capability and offers optional lighting provisions to allow riders to conquer the challenging terrains, safely and in style. The Element front bumpers come light-ready for either a fixed mount light bar provision or for the power actuated hide-away light bar mount provision. Select the model to meet your needs. Additional product features: * 14-gauge bumper 1/8 in. steel shell with 1/4 in. steel mounting brackets * Textured black finish for added durability * Available in Power Actuated hide-way light bar mount or fixed light bar mount version (please specify bumper model when placing your order) * Dramatically improves appearance of factory light trucks * Off-road capability with additional tire and ground clearance * Bumper is light-ready with a static mounting plate for a 20 in. double-row LED light bar (sold separately) * Optional Power Bar (sold separately) hides center light bar at the flick of the switch for the power actuated hide-away bumper model * Mesh panels reduce weight and improves air flow * Mesh panels are paintable for a customized look * Multiple light pods can be added to each wing behind mesh panels * Some assembly required Note: Trimming of front fascia may be required on Tacoma models.
Not Yet Reviewed
$1,549.99
Designed to tackle the most challenging off-road trails, ADD Offroad's Krawler Series Bronco rear bumpers are a combination of durability, functionality, and thoughtful engineering. Their low-profile fitment and modern plate steel construction is well suited for rock crawling. Two 3-4 in. round light mounts provide options for supplemental rear lighting. Krawlers accommodate the OEM tire mount and back-up camera, as well as the factory hitch and trailer harness. Included with the bumper is a 3rd brake light extension bracket compatible with up to a 37 in. spare tire, and a license plate relocation bracket that mounts to the carrier. Recovery options include heavily reinforced clevis mounts for 3/4 in. D-ring shackles. The Krawler Bronco rear bumper is finished in a hammer black powdercoat, while its aluminum accent panels are finished in a satin black powdercoat. Additional notes: * Relocates license plate light * Retains factory parking sensors * Fully bolt-on
Not Yet Reviewed
$1,898.98
ARB skid plates are just the thing for protecting your rig from that challenging off-road terrain and unexpected obstacles that cause the most damage beneath your vehicle. The skid plates are designed to shield all of your vehicle's vital underbody components from end to end—to ensure that your steering, oil pan, tranny, and transfer cases will all be safe during every trail adventure. You're "rock ready" with ARB bolt-on skid plates! Additional features and details of ARB skid plates include: * Manufactured from laser-cut steel, zinc plated with a powdercoat finish * Press-formed and expertly folded for optimum strength to weight * Recessed mounting bolts and openings or easy-to-remove panels—so your vehicle can be easily serviced * Skid plates are model-specific; order the one designed for your vehicle
( 3 )
$2,078.00
Introducing the game-changer for diesel pickup truck owners: Titan Spare Tire Auxiliary Fuel Tank Systems (STAFS). With an impressive additional 30 gallons of fuel readily available, these revolutionary systems transform your truck into a powerhouse on wheels, effectively doubling the fuel capacity of most diesel trucks. Gone are the days of worrying about fuel shortages on long hauls or remote expeditions. The STAFS ingeniously repurposes the typically underutilized space reserved for your spare tire, turning it into a valuable asset for extended journeys and demanding tasks. Imagine the freedom of having 30 extra gallons of fuel at your fingertips – it's like having your own personal fuel station wherever you go. Whether you're tackling challenging terrain, embarking on cross-country adventures, or hauling heavy loads, the STAFS ensures you never have to compromise on fuel availability again. Crafted from military-grade, cross-linked Polyethylene, the Titan Spare Tire Auxiliary Fuel Tank Systems boasts unrivaled durability and is backed by a lifetime warranty. Titan's electronic controller provides complete fuel control with a single touch. The operator has complete and total flexibility in managing how extra fuel capacity is used. The fuel can be held in reserve or transferred on-the-go as the need arises. The controller's illuminated user interface indicates the tank's fuel level and features a single-touch button that starts the fuel transfer sequence. With one touch, fuel begins transferring from the auxiliary tank to the vehicle's primary fuel tank, the pump will run for approximately 10 minutes, transferring 5 gallons of fuel. If the primary tank fills during that time, the pump will automatically stop pumping fuel. A great feature is that Titan's controller only requires a power wire and a ground. It does not invade the truck's wiring harness or computers. Its underbody location means that it has no impact on the truck bed's hauling space. In many cases where aftermarket custom wheels and tires are installed on a vehicle, they are not the same size as standard which means the original equipment spare cannot be used anyway.
( 2 )
$1,614.05
On Sale
Exploring off-road trails can be challenging, scenic, and highly pleasurable, but your vehicle's axles and driveshafts are constantly battling enemies intent on breaking them. Spicer Drivetrain Products performance driveshafts come ready for the onslaught, with shafts that are 50 percent thicker than stock and have a smaller diameter for increased clearances. These driveshafts are designed for vehicles with either short or medium lifts and have longer travel slip yokes. They are available either with or without a new transfer case yoke and hardware. Bending a driveshaft on the trail leads to all kinds of issues. For a heavier duty shaft, go with Spicer Drivetrain Products performance driveshafts.
( 3 )
$1,819.99
Take control of your trailer and RV positioning with Trailer Valet tire dollies—a game-changing tool designed for seamless tandem axle trailer movement. Engineered to handle up to 2,000 lbs. capacity per dolly, this high-performance equipment transforms the way you hitch, park, and adjust your vehicle. Whether you're maneuvering a heavy-duty RV or repositioning an automotive trailer in a tight space, these dollies deliver effortless handling and precise control for stress-free adjustments. Navigating tight spaces is no longer a challenge. The dollies' innovative design reduces friction on one axle, allowing for a significantly tighter turn radius. Effortlessly guide your trailer or RV into position with pinpoint accuracy, eliminating the hassle of multiple adjustments. Whether you're parking in a crowded lot, adjusting a trailer in a garage, or making last-minute angle corrections, the dollies ensure nimble, controlled movement in any scenario. Built with a heavy-duty steel frame and smooth-rolling polyurethane casters, the Trailer Valet tire dollies glide effortlessly across solid surfaces while supporting heavy loads with durability and stability. The rugged construction ensures longevity, while the high-quality casters minimize resistance, making repositioning a seamless and efficient experience. Designed to fit a variety of trailer and RV tire sizes, the dollies can accommodate tires up to 13 in. wide and 32 in. in diameter. Whether you're working with an RV, boat trailer, utility trailer, or using them in an automotive shop, the versatile dollies are essential tools for anyone needing precise and effortless towing adjustments. They're available in pairs or a set of 4. Product features: * Heavy-duty design for easy maneuvering of tandem axle trailers and RVs and vehicle use * Creates a tighter turn radius for your trailer by reducing friction in one axle * Sturdy steel frame and polyurethane casters for smooth movement on solid surfaces * Max. wheel weight: 2,000 lbs. per unit / (Max. vehicle weight: 8,000 lbs. using 4 dollies) * Fits tires up to 13 in. wide and 32 in. diameter * Polyurethane caster wheels for durability and longevity * Additional set of caster wheels (6 total) for increased stability and product longevity * Longer ratcheting foot pedal for more leverage and ease while lifting * Extra set of rollers for a smoother lift and to prevent tires from pinching * Built-in side handle for easy carrying * Wrinkle black powdercoating provides 300 hrs. of corrosion resistance
Not Yet Reviewed
$1,597.00
Ramsey's outstanding, American-made Patriot Profile series winches are packed with all the power and features you need to handle any pulling challenge. An efficient, 4.4 or 5.5 HP, 12 V, reversible electric motor provides the power, while a 3-stage planetary gear-reduction system provides the torque needed to get you out of any situation. Other features include a cam-action clutch that disengages the planetary gear set for free-spooling, a strong automatic load-holding brake, a weather-resistant solenoid assembly, and a 4-way roller fairlead.
( 1 )
$1,718.99
—
$2,178.99
The Forgeline Motorsport Series GS1R-6 wheels are a lightweight forged racing wheel engineered for race cars and dedicated track duty. Each Forgeline Motorsport GS1R-6 wheel is custom made-to-order, one-at-a-time, for each individual customer and each unique vehicle application. Originally designed for professional racing teams competing in the IMSA Continental Tire Sportscar Challenge Grand Sport (GS) class, the Forgeline GS1R-6 combines the latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport engineered design, and I-beamed spokes. This wheel is engineered to withstand the rigors of top-level endurance racing with a 2,100 lb. street tire load rating and exceptional deflection stiffness. The GS1R-6 is a unique forged monoblock wheel that is designed specifically for vehicle applications with 6-lug hubs, including the Dodge Viper. Though made from the same forgings and similar design as Forgeline's original GA1R street wheel, the Motorsports Series GS1R-6 employs an open-lug center area for additional weight reduction and improved access to the lugs. In combination with a new chamfered outer lip (with fewer sharp edges for easier handling), this enables faster wheel changes and, depending on size and offset, can save an additional pound of mass from each wheel! The Forgeline Motorsport Series GS1R-6 is a custom-order wheel machined from a single forging of 6061-T6 aluminum. It is currently available in 17-inch, 18-inch, 19-inch, 20-inch, and 21-inch diameters with a range of widths and offsets. And just like any Forgeline wheel, the Motorsport Series GS1R-6 is offered with customizable finish options. Note: This wheel requires special machining to fit Forgeline's optional open lug center cap. If you wish to use the optional open lug center cap, then you must specify when placing your order! Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.
Not Yet Reviewed
$1,528.99
The Forgeline Motorsport Series GS1R wheels are a lightweight forged racing wheel engineered for race cars and dedicated track duty. Each Forgeline Motorsport GS1R wheel is custom made-to-order, one-at-a-time, for each individual customer and each unique vehicle application. Originally designed for professional racing teams competing in the IMSA Continental Tire Sportscar Challenge Grand Sport (GS) class, the Forgeline GS1R combines the latest in advanced wheel technology, including one piece forged monoblock construction, motorsport engineered design, and I-beamed spokes. This wheel is engineered to withstand the rigors of top-level endurance racing with a 2,100 lb. street tire load rating and exceptional deflection stiffness. Though made from the same forgings and similar design as Forgeline's original GA1R street wheel, the Motorsport Series GS1R employs an open-lug center area for additional weight reduction and improved access to the lugs. In combination with a new chamfered outer lip (with fewer sharp edges for easier handling), this enables faster wheel changes and, depending on size and offset, can save an additional pound of mass from each wheel! The Forgeline Motorsport Series GS1R is a custom made-to-order wheel machined from a single forging of 6061-T6 aluminum. It is currently available in 17-inch, 18-inch, 19-inch, 20-inch, and 21-inch diameters with a range of widths and offsets. And just like any Forgeline wheel, the GS1R is available with fully customizable finish options. Note: This wheel requires special machining to fit Forgeline's optional open lug center cap. If you wish to use the optional open lug center cap, then you must specify when placing your order! Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.
Not Yet Reviewed
$1,528.99
Some of the world's finest custom lightweight forged aluminum wheels are right here—and we get them from Forgeline Motorsports! Forgeline's one-piece Monoblock Series GS1 custom-order wheels are machined entirely from a single 6061-T6 aluminum forging to create a wheel that is extremely stiff, exceptionally strong, and very lightweight—all rolled into one attractive package! Based on Forgeline's extremely successful GS1R wheels, which was originally designed for professional racing teams competing in the IMSA Continental Tire Sportscar Challenge Grand Sport (GS) class), the Forgeline GS1 combines the latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport engineered design, and I-beamed spokes. The GS1 is engineered to withstand the rigors of top-level endurance racing with a 2,100 lb. street tire load rating and exceptional deflection stiffness. Though made from the same forgings and similar design as Forgeline's race-winning GS1R (including the distinctive smooth chamfered outer edge), the GS1 forgoes the GS1R's aggressive open-lug center area for a more traditional center design that accommodates Forgeline's standard press-in aluminum center cap. Forgeline can custom build the GS1 wheel in 17-inch, 18-inch, 19-inch, 20-inch, 21-inch, and 22-inch diameters with a range of widths and offsets. Depending on size, the GS1 may be available in deep, medium, or shallow concave profiles. And just like any Forgeline wheel, the GS1 is available with fully customizable finish options. Forgeline is so serious about delivering satisfaction that all of their wheels are totally made-to-order. Each wheel's backspacing, diameter, fit, finish, and appearance are under your control. Competition drives excellence at Forgeline Motorsports; let them forge a set of wheels for you! Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.
Not Yet Reviewed
$1,528.99
Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.
( 30 )
$1,709.05
Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.
( 541 )
$1,627.99
—
$1,984.99
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$1,873.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
