Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
FORD Parts and Accessories
Showing In Stock Items. Show All 53 Items.
Not Showing Customizable Items. View Customizable Items.
On Sale
Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 10 )
$1,999.95
—
$2,199.95
$1,798.95
—
$1,978.95
On Sale
Holley Terminator X MAX Engine Management Systems
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 91 )
$1,899.95
—
$2,099.95
$1,708.95
—
$1,888.95
On Sale
Holley Terminator X Engine Management Systems
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 96 )
$1,949.95
$1,753.95
On Sale
UniSteer Rack and Pinions
UniSteer rack and pinions are designed to provide precision steering for easier driving. Made from cast aluminum with a variety of finishes available, these replacement racks can be ordered to complement either manual or power-assist configurations. They're offered in fitment applications for a wide range of year, make, and model vehicles. Accessories included will depend upon the model you select. Better steering control begins with UniSteer! UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 57 )
$1,880.99
$1,692.89
On Sale
Body Armor 4x4 Ambush XT Series Ford Front Bumpers
The Body Armor 4x4 Ambush XT Series Ford front bumpers are perfect if you want a sleek, modern design on your vehicle, as they follow the contours of your Ford truck for an exact fit and stylish design. These bumpers provide superior functionality, and are constructed from 3/16 in. and 1/4 in. cold roll steel and come with a two-stage light texture black powdercoat finish for superior strength, durability, and rugged good looks. Beyond appearance, these Body Armor 4x4 bumpers also provide superior protection to your vehicles grille and headlights. The front bumpers are styled to fit a factory camera and have provisions to mount a 30 in. dual row LED bar and four cube LED lights for additional lighting, if you so desire. They also have 2 in. receiver and shackle recovery mounts for ultimate functionality. And, being application-specific, these front bumpers bolt-on directly to your vehicle for an easy installation, with no drilling or modification required. Protect your vehicle while giving it a stylish upgrade with a Body Armor 4x4 Ambush XT Series front bumper.
Not Yet Reviewed
$1,749.99
$1,574.99
On Sale
Dee Zee Guardian Tonneau Covers
Secure your gear under a lockable, water-resistant Guardian tonneau cover from Dee Zee! The Guardian tonneau covers are a sleek aluminum hard-top tonneau system for full-size trucks. With a weight rating of 800 lbs., you can transport tents and other gear on top of the cover, or the lockable rear panel opens effortlessly with dampened gas shocks for easy opening and support. Extrusion channel offers endless tie-down and accessory options (cross-bars and platform racks sold separately) to meet your unique needs. Order the tonneau cover in length you'd prefer. Features and benefits of Guardian tonneau covers: * Constructed of .056 Brite-Tread aluminum with an 800 lb. static rating * Textured black powdercoat finish and die cast corners * Easy to access handle that's lockable for extra security * Dampened gas shocks for easy opening and support * Detach the quick-release shocks to fold the rear panel 180 degrees * Comes with tie-down strap * Includes rubber tailgate seal that keeps the dust out * Channel system drains water away from the tonneau surface * Extrusion channel offers endless tie-down and accessory options (cross-bars and platform racks sold separately)
Not Yet Reviewed
$1,701.99
$1,531.79
On Sale
Bestop Skyrider Retractable Tops
Introducing Bestop's all-new Skyrider retractable tops for the Ford Bronco 4-door models with a hardtop. Designed for the 2021 to current model year Ford Bronco, the Skyrider is taking the factory modular hardtop to a whole new level. The large dual-row opening now becomes convenient to achieve on-demand and gives all passengers that unmistakable top-off sensation. Skyriders are an all-season upgrade that replace the factory top panels and achieve the driving experience you crave from your Bronco. The innovative 3-panel top unlatches from the front. Once the two folding front panels are removed, the top slides back easily from outside the Bronco to create an expanded open-air experience. For ease of operation, the slide mechanism of the Skyrider is enhanced with a cam profile gas-assist side bow mechanism that makes opening the top smooth and easy. The sturdy construction and durable materials used in each Skyrider stand up to year-round and all-weather use. Order the material and pattern you prefer.
( 1 )
$1,899.99
$1,614.99
On Sale
Quick Fuel QFX-Series Carburetors
These Quick Fuel QFX-Series carburetors feature an all-new die-cast aluminum main body, which has a lengthened venturi section for greater midrange torque and better airflow. The annular booster venturis are precision die-cast with CNC-machined billet aluminum inserts, providing smoother and more refined air entry, a stronger vacuum signal, less turbulence, and improved fuel emulsion for better combustion. The Quick Fuel QFX-Series carburetors use red anodized billet aluminum CNC-machined metering blocks featuring 3-circuit metering (gasoline carburetors), changeable emulsion, idle feed, and intermediate bowl and feed discharge. Next, the die-cast aluminum fuel bowl combines high strength with significant weight reduction. They feature dual threaded fuel inlets and outlets and dual sight glass holes to easily set the float levels. The Quick Fuel QFX-Series carburetors feature Quick Fuel's external linkage with four different links to select the amount of primary throttle opening before the secondaries open: moderate progressive (25 percent), medium progressive (40 percent), full progressive (50 percent), and 1:1.
( 7 )
$1,749.95
—
$2,151.95
$1,573.95
—
$1,935.95
On Sale
AMP Research PowerSteps
AMP Research PowerSteps are full length automatic electric-powered running boards that instantly extend when you open your door, and then hide themselves safely out of sight when the doors close for improved ground clearance, aerodynamics, and appearance. And their attractive design and legendary reliable, all-weather performance sets a new industry standard. Features include: * High-strength, diecast aluminum-alloy linkage arms, anodized and PTFE coated to resist corrosion * Precision, zero-maintenance stainless-steel pivot pins * Extruded aluminum steps with a textured powdercoated finish for maximum grip and durability * Weatherproof, OEM-quality electric motors and wiring harness with sealed weathertight connectors * AMP-designed electronic controller employs pressure-sensitive, pinch-proof safety technology * Integrated LED light system (standard) * 600 lbs. load capacity (each side)
( 83 )
$1,799.99
$1,599.99
On Sale
BD Diesel Screamer Turbochargers
BD Diesel Screamer turbochargers may offer a stock drop-in installation and appearance, but they are anything but stock! They feature a larger ballistic billet compressor wheel and BD's exclusive turbine profile that results in reduced backpressure and increased turbine flow compared to the competition. You get more potential maximum power output, right up to 690 hp with performance modifications. Each turbocharger is high-speed balanced with the actuator stroke tested prior to shipping.
( 2 )
$2,081.95
—
$2,084.95
$1,873.76
—
$1,876.46
On Sale
MSD Direct Ignition Systems
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$2,049.95
$1,843.95
On Sale
Flowmaster Outlaw Series Exhaust Systems
Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.
( 274 )
$1,699.95
—
$1,949.95
$1,528.95
—
$1,753.95
On Sale
Baer Brakes Pro Brake Kits
You may have to slow down in a hurry—and if your vehicle is carrying tons of weight, it's not always easy to attain the greatest braking performance. That's where Baer Pro brake kits come in. Designed as direct bolt-on systems pre-loaded with ceramic brake pads, they feature slotted, drilled, and zinc plated rotors—and the calipers have dust and weather seals. Baer Pro brake kits are suitable for virtually any level of performance, on the street or track. Find the front and/or rear system compatible with your vehicle.
( 1 )
$1,849.95
—
$2,199.95
$1,663.95
—
$1,978.95
On Sale
Baer Brakes 6T Front Brake Kits
Baer Brakes 6T front brake kits feature the 6-piston 6T caliper mounted to a 13.5 in., 1-piece slotted and zinc-plated rotor. The 6T calipers are D.O.T complaint, with dust and weather seals, and use the popular D1247 style pads. Rotors are purpose-cast using only premium materials and feature a curved vane design for optimum cooling, consistent braking, and reduced brake fade. All mounting brackets, stainless braided hoses, and hardware are included. These front brake kits are available for hundreds of applications, including countless Chevrolet, Ford, Toyota, Cadillac, GMC, and Jeep models. Select the caliper color you prefer.
Not Yet Reviewed
$1,849.95
—
$2,199.95
$1,663.95
—
$1,978.95
On Sale
Tuff Country Performance Lift Kits
Get additional tire clearance to fit larger tires and a cool new look with one of these Tuff Country performance lift kits. These suspension lift kits are engineered to give the highest quality and best value, and kits that include extended radius arm offer better suspension articulation and additional tire clearance. Front coil springs and rear add-a-leaf's are used to lift your vehicle, while radius arm drop brackets, axle pivot brackets (with camber adjustment bolts) and sway bar drops keeps everything proper aligned. A camber adjustment bolt allows for adjustment for your vehicle application to provide a precise front end alignment and better tire wear. Nobody ever said that suspension modifications where a piece of cake. Tuff Country engineers designed their suspension kits with ease of installation—a key factor in the design. Get a big boost in your ride profile and handling with Tuff Country performance suspension lift kits. They're the best way to give your rig maximum height, clearance, and attitude. Choose the Tuff Country performance lift kit for your application needs. Product features ad highlights: * Gain additional tire clearance * Axle pivot brackets includes camber adjustment bolts for precise alignment * Shocks are sold separately unless otherwise noted * Kits with extended radius arms allows for better suspension articulation * EZ-Ride front coil springs
( 3 )
$1,717.96
—
$1,732.96
$1,546.16
—
$1,559.66
On Sale
All American Billet Serpentine Kits
All American Billet serpentine kits are perfect for cleaning up your engine compartment and giving it a fresh look. These kits come standard with high performance accessories. If you need to replace your belt system or just want to show off to your friends these All American Billet serpentine kits will do just that! Installation is easy with all the hardware and necessary components included in the box. A variety of different setups are available to fit models with or without power steering and air conditioning.
( 16 )
$1,975.99
—
$2,199.99
$1,778.39
—
$1,979.99
On Sale
BD Diesel Turbo Thruster II Turbochargers
Here's a perfect power match for stock or modified engines--BD Diesel Turbo Thruster II turbochargers. Designed as direct, bolt-in replacements for your stock turbo, they offer superior pressure ratios, cooler EGTs, and increased airflow with no compressor surging. The compressor housing design and back plate casting will improve turbo spool-up time and allow for full housing rotation for an easier installation. The rotating assembly uses journal bearings and a new 360 degree bronze thrust washer for extended bearing life and makes future service a lot easier. Give your rig more power with BD Diesel Turbo Thruster II turbochargers.
Not Yet Reviewed
$1,979.95
$1,781.96
On Sale
Summit Bucks
Mishimoto Intercooler and Pipe Kits
Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.
Not Yet Reviewed
$1,757.95
$1,552.22
On Sale
Retrax One XR Tonneau Covers
Retrax One XR tonneau covers are manual retractable truck bed covers constructed from rigid polycarbonate. They provide superior impact resistance and the ultimate UV protection, allowing covers to perform well in temperatures from -50 to +200 degrees F. The One XR Polycarbonate Series is manufactured from a one-piece sheet engineered to retract without joints, hinges, or moving mechanisms that can trap dust, wear out, or freeze—creating a maintenance-free truck bed cover. Retrax One XR tonneau covers not only provide rugged protection, but their low-profile design will enhance the appearance of your truck. Additional features include: * Unique spiral track system prevents the cover from coming into contact with itself as it opens and closes * Tonneau covers effortlessly glide along the rails by the sealed ball-bearing roller system—with a convenient handle that eliminates the need for pull straps, Velcro®, snaps, or springs * Covers always stay flush to the rails, which helps to create dependable seals, keeps the elements out, and protects your cargo * They are key lockable in any position along the rail, providing unlimited flexibility in your hauling capacity * Compatible with most T-slot accessories * Increased cargo capacity above and below the covers * Opens and closes easily with one hand * Patented low-profile design * Resilient matte finish
( 5 )
$1,749.99
$1,549.99
On Sale
MBRP Pro Series Muscle Car Exhaust Systems
Are you serious about "cool"? MBRP Pro series exhaust systems offer the coolest duals and the hottest singles for your muscle car. Pro series systems are constructed from T304 stainless steel and feature mirror-polished mufflers and tips for a lasting appearance and optimal durability. Crafted with smooth mandrel bends and high-flow mufflers, MBRP exhaust systems give your ride the sound, torque, and horsepower that every true muscle car should have. And, since MRBP shares your passion, they've created their systems to be installer-friendly with common hand tools for a bolt-on, no-weld, no-hassle installation! So, don't you think it's time to get serious? Add Pro series muscle car exhaust systems from MBRP--the makers of performance, sound, and style.
( 3 )
$1,669.99
$1,539.99
On Sale
Roll-N-Lock A-Series Retractable Tonneau Covers
Built with the same rugged durability as the well-known M-Series, Roll-N-Lock A-Series retractable tonneau covers provide all-aluminum construction. The unique, powdercoated aluminum cover body is bound together by a patent pending hinge technology that delivers a nearly impenetrable seam. Unlike other aluminum bed covers that provide only "out of sight, out of mind" security, Roll-N-Lock's A-Series is the real deal. With no exposed rubber seams and a patented tailgate locking system, knife-wielding thieves don't stand a chance. Just like its M-Series counterpart, the A-Series' tonneau cover permits opening or closing in literally seconds, there are no snaps to manipulate or heavy folding panels to lift. A simple rotation of the lock lever and the cover retracts into Roll-N-Lock's ultra-compact housing offering easy and instant access to the entire truck bed.
( 2 )
$1,949.99
$1,649.99
On Sale
Retrax One MX Tonneau Covers
Matte black has become a popular finish on automotive parts like fender flares, wheels, grilles, bumpers, and trim. Now you can carry that look onto the top of your truck bed with Retrax One MX tonneau covers! They feature a durable and scratch-resistant matte black powdercoat designed to look great for years. Excellent seals and weatherstripping keep your cargo dry, while the retractable cover can be locked in any position for full, partial, or zero coverage. These one-piece Lexan polycarbonate covers have strong impact resistance, and are engineered without hinges for better performance in the sizzling summer, leafy fall, heavy winter, and rainy spring. Sealed ball bearing rollers on aluminum support beams allow your tonneau cover to easily close or open into its 11 in. squared spiral track container—which prevents the cover from contacting itself, keeping wear and tear to a minimum. For a low-profile, clamp-on cover that looks great and offers strong protection, choose the Retrax One MX tonneau cover designed for your truck bed.
( 9 )
$1,699.99
$1,549.99
On Sale
Summit Bucks
Mishimoto Performance Radiator Essentials Bundles
Restore and enhance your cooling system with a Mishimoto Performance Radiator Essentials Bundle. The bundles include high-quality upgraded cooling components to replace items Mishimoto found to be the most failure-prone. Kits feature an aluminum radiator, silicone radiator hose kit, high- and low-temperature thermostats—plus other components (depending on the bundle you select). The Performance radiator features full aluminum construction with durable TIG-welded end tanks. In addition, it's designed with a massive two-row 2.2 in. thick core, which provides substantial improvements in cooling efficiency. The radiator hose kit is constructed from four layers of silicone with heat-resistant embedded fibers. This combination of materials provides substantially improved heat and pressure tolerance compared to the stock rubber hoses. In addition, the kit includes a CNC-machined aluminum quick-disconnect fitting, providing a considerable improvement in durability over the stock plastic unit. Rounding out the basic Essentials Bundle is a pair of thermostat sets; high-temperature thermostats hasten engine warmup, making it ideal for use in cold climates. The low-temperature thermostats have a lower activation temperature compared to the factory thermostat. Lower activation temperature allows coolant to flow through the engine earlier, reducing the risk of overheating in hot environments. Order the bundle with components preferred for your vehicle.
Not Yet Reviewed
$1,730.95
$1,662.97
On Sale
Roll-N-Lock M-Series Hybrid Retractable Tonneau Covers
From its retractable function, which permits opening or closing in literally seconds, to its rigid, vinyl-over-aluminum laminated construction, Roll-N-Lock M-Series hybrid retractable tonneau covers offer everything other covers do not. There are no snaps to manipulate, no roll or bundle to lash down or stow, no crossbars to negotiate, no fabric shrinkage to struggle with, no folding or solid hinged covers to combat, and best of all, no worries about the security of your cargo. The Roll-N-Lock M-Series tonneau covers … by far the most intelligent and versatile tonneau covers made.
( 8 )
$1,799.99
$1,599.99
