Availability
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 58 )
$1,783.99
—
$2,049.99
On Sale
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 57 )
$2,250.95
$1,950.95
—
$2,182.95
Currie 9-inch third members are designed to fit Ford 9-inch applications. The case is made from nodular iron and installed is a Currie TwinTrac® posi differential in 31 spline, or Eaton TrueTrac differential in the 35 spline options. All Currie third members include a big bearing "Daytona" pinion support, are fully assembled, and delivered ready to install.
( 5 )
$1,550.00
—
$2,200.00
Diesel trucks are designed for towing heavy loads. If your rig is running 500 to 650 hp, then Valair Performance Quiet Street Dual Disc clutch kits are the way to tow. They feature tough heavy-duty parts, strong pressure plates, and a nodular iron flywheel. These kits are not intended for racing or competition use. Quiet clutch kits eliminate floater plate rattle when the clutch is pressed in, but gear rollover noise is inevitable when changing to a solid mass flywheel. It's often heard when the vehicle is under load at low rpm or idling, and it sounds like marbles in the transmission. Please educate yourself before purchase. Towing is tough on your vehicle—keep the pressure high and the shifts solid with a Valair Performance Quiet Street Dual Disc clutch kit, available for a variety of specific transmission applications.
( 9 )
$1,631.58
South Bend Clutch Dyna Max street dual disc clutch kits are offered for a range of applications and setups. These clutch kits are made using high performance materials and include everything you need for your clutch installation. Many kits include Kevlar® pilot bushings. When it comes to street performance, you can count on South Bend for top-quality components.
( 79 )
$1,698.78
—
$1,856.86
Introduced in the early 1980s, the Tremec T-5 has become a highly evolved, extremely compact, and versatile 5-speed manual transmission. In its rich history, the T-5 has been installed as original equipment in pickup trucks, SUVs, and performance automobiles. Today, the T-5 is available in its best form to date—sometimes referred to as "world class" or Z spec (from Ford's part number 7003Z). It has a 2.95 first gear with .63 overdrive, hardened gears, short throw factory shifter, steel front bearing retainer, tapered output shaft bearing, and a seven tooth-drive speedometer gear. Best of all, the T-5 transmission has a torque rating of 300 lbs.-ft., making it a perfect option for any moderate powered hot rod, street car, or kit car. Additional details: * The most compact Tremec transmission available, making it a "go to" for projects with limited space * At 75 lbs. dry, it's attractive for weight-conscious builds * Excellent drivability is achieved with light shift effort and smooth, positive shift quality * Its .63 overdrive provides exceptional fuel mileage * Popular choice for weekend cruisers, street-rodders, and kit car enthusiasts
( 7 )
$2,000.00
GForce Renegade axle shafts offer big league strength and performance at a fair price point. They're direct replacements for your factory half-shafts and are designed for cars with everything from mild bolt-ons to those running superchargers and turbos. CNC-machined from proprietary aerospace billet alloy, Renegade axles feature upgraded spline counts on the axle bar and CV joints—providing more engagement. This allows for larger diameter bars equaling more strength, as well as more travel and increased operating angle over OEM CV joints. GForce Renegade axle shafts are a leap above entry-level, with hand-built assemblies utilizing premium materials and carefully controlled processes. Order the pair recommended for your vehicle application. Features include: * Anti-wheel hop technology—significant reduction during hard launches * Direct bolt-in fit and finish * 31-spline severe-duty CVs * Stronger one-piece CNC-machined inner and outer stubs * Powdercoated axles for corrosion protection * Black E-coat finish on inner and outer stubs to protect against harsh conditions, without impeding spline engagement
( 5 )
$1,699.00
—
$1,999.00
On Sale
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 31 )
$2,210.95
$1,596.99
—
$2,280.95
On Sale
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$2,250.95
$1,853.95
—
$2,166.95
On Sale
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 144 )
$2,024.95
$1,724.95
—
$2,064.95
South Bend Clutch Dyna Max organic feramic clutch kits are manufactured with performance organic and feramic friction materials, which provide moderate clutch engagement. The Dyna Max organic clutch feramic kits by South Bend Clutch are durable and reliable. They come with the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. These kits are available for a variety of clutch styles and applications, with or without the flywheels. Select the kit best suited for your application needs.
( 22 )
$1,537.72
Yukon Gear & Axle ring and pinion and differential combos save time and money by including everything you need in one simple part number. Pro Kits feature a premium Yukon ring and pinion gear set, Yukon Master install kit with high-quality Timken bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the Yukon Gear & Axle ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,522.99
—
$2,197.99
Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.
( 7 )
$1,550.00
—
$2,100.00
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 46 )
$1,595.00
—
$1,895.00
Moser Engineering Ford 9 in. third member assemblies are designed to help you get that horsepower to the ground. They include your choice of an aluminum, nodular iron, or stock center section, as well as a differential, an axle spline, a U-joint style yoke, pinion support, and gear ratio. Whether you're assembling a daily driver, street rod, or race car, these Moser third member assembly packages will provide the durability that your vehicle deserves.
( 11 )
$1,540.00
—
$2,125.00
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,551.25
—
$2,006.00
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 318 )
$1,500.99
—
$2,081.99
Want to get back the power and gas mileage that you lost from installing those big tires on your Jeep? Motive Gear makes it easy to re-gear your 4x4 with their ring and pinion gear and installation kit combos. These complete kit combos include front and rear ring and pinion sets, plus front and rear bearing kits, giving you everything you need to re-gear the front and rear differentials in one package. The kits come in a wide range of ratios for most Dana applications. Their quality is the result of years of development, outstanding design, and state-of-the-art manufacturing methods to ensure a perfect fit for an easy install.
( 8 )
$1,518.28
—
$2,330.08
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 3 )
$1,524.48
—
$2,112.66
If you are considering Ridetech's coilover suspension system for the back of your vehicle, don't let the rearend stop you! Currie 9 in. Ridetech housing and axle packages are available in stock axle width or narrowed for mini-tubs, and feature the stock pinion offset (drive shaft location) and wheel bolt pattern with Ridetech 4-link suspension and sway bar brackets installed for a straightforward, hassle-free installation. Features: * Currie Centurion high-strength 9 in. notchback housing with flush drain plug * Ridetech 4-link brackets installed * Available in stock or mini-tub widths * Currie Performance 31-spline axles with wheel studs installed * Tapered axle bearings and heavy-duty retainers
( 1 )
$1,750.00
Mopar Replacement differential assemblies offer quality, along with an original equipment fit and function to keep your favorite Chrysler, Dodge, or Jeep on the road. You can count on these units to effectively drive your wheels, and keep you moving. Restore and repair your vehicle with genuine Mopar differential assemblies.
( 17 )
$2,021.99
—
$2,042.99
Currie Turn 9 hosing and axle packages are complete, ready to bolt-in assemblies built to match the vehicles stock axle width, pinion offset, suspension mounting locations, and wheel bolt pattern for a straightforward hassle-free installation. Included standard features: * Currie Turn 9 housing features high-strength fabricated 4130 chromoly steel center section with internal tube gussets and CNC-machined face flange, with 3 in. diameter chromoly axle tubes, all joined with strong, attractive welds to deliver superior strength and durability * Torque arm mount—fabricated, heavy-duty mount provides OEM fitment for compatibility with stock or aftermarket torque arms * Heavy-duty, laser-cut suspension brackets installed on the housing, matching the stock OE locations and fitment for a direct bolt-in fit * CNC-machined billet housing ends with provisions for internal or external axle oil seals * Currie Performance 31-spline 1541 alloy axles with tapered axle bearings * Bearing retainers assure positive bearing retention and full seal engagement Please note: These packages require a 9 in. third member assembly and compatible brake package to complete the rear-end, and will require assembly of components prior to installation.
Not Yet Reviewed
$1,900.00
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$1,606.95
—
$1,616.95
High-horsepower and stock axles are fine if you're sitting in neutral and revving the engine, but foot-pounding acceleration requires Gforce Outlaw axle shafts. These direct bolt-in axles feature anti-wheel hop technology for smoother launches, powdercoating for corrosion resistance, and extremely strong CNC-machined one-piece outer and inner billet stubs. Their proprietary aerospace billet alloy shafts use large 31-spline axle bars and 31-spline severe-duty CV joints, enabling these IRS axles to support awe-inspiring performance! Outlaw CVs produce greater travel and operating angles than OE joints, helping to keep tires on the road instead of loitering in outer space. All axle assemblies are hand-built in the USA with premium materials. Order the model recommended for your application.
( 2 )
$2,099.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
