Availability
On Sale
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$2,049.95
$1,609.95
—
$1,843.95
Chevrolet Performance 480 hp LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or muscle car.
( 1 )
$2,167.43
FuelTech FT550 EFI systems were developed and created to put you in control! The FT550 ECU is an engine fuel control and monitoring system: electronic fuel injection, integrated dashboard, data acquisition, and power management system all-in-one! It uses the same FTManager software as the FT600, with the same features and functionalities--including the newest update that allows the user to update their fuel map by applying the oxygen closed loop corrections that took place from a log file. Map files of all the PowerFT ECUs are compatible with each other, meaning that you can upgrade ECUs and keep the same tune you had already. The dashboard design of the FT550 ECU systems feature an engine start button, new inclinometer gauges; and virtual LEDs for arrows, headlights and other functions. The touch screen allows editing the maps directly on the module (without the need for computer use) and seamless integration between the ECU and vehicle dashboard. More key features and benefits: * Sturdy, waterproof plastic case automotive connectors with 52 pins, USB communication and two CAN Bus ports, 14 inputs and 24 outputs that are fully configurable * Best ECU for projects that require more features, including GearController (power-shifts), built-in accelerometer (G-meter) and gyroscope; in addition to all PowerFT ECU line features such as sequential injection and ignition, O2 closed loop, active traction control, integrated BoostController, internal datalogger, progressive and PRO-Nitrous controls, odometers, electronic throttle control, inclinometer, drag racing features and more
( 3 )
$1,699.00
Chevrolet Performance Parts LS controller kits have everything that you need to properly tune your Chevrolet Performance Parts crate engine. Kits include: * ECU * Engine wiring harness * Mass airflow meter * Mass airflow meter mounting boss * Accelerator pedal assembly * Two oxygen sensors with mounting bosses * Detailed instruction sheet
( 1 )
$2,167.43
On Sale
Introducing the Holley EFI 8-Channel CANBus EGT kits, for Holley EFI! Exhaus/Gas/Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to as identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The EGT probes come in different lengths ensuring a clean looking installation. The included stainless steel bungs feature a built-in step, making installation as easy as possible! Kit features: * Compatible with HP or Dominator EFI, and Terminator X EFI * Plug-and-Play 8-Channel CAN EGT module, for quick and easy installation * High-quality 1/4 in. stepped stainless steel EGT weld bungs * Robust 1/4 in. EGT probes, designed to withstand the extreme cylinder pressures * 4 ft. CAN extension harness * Analog output wires, to be used with non-Holley EFI installations * Requires V5 build 100 or newer software/firmware
( 1 )
$1,699.95
$1,528.95
On Sale
Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff
( 25 )
$1,999.95
$1,798.95
HalTech uC-10 digital dash displays offer crisp, clear, and full color viewing compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. They can also be wired in as a complete standalone unit. The versatility of the uC-10 dashes ensures they can seamlessly integrate into a wide range of vehicles and setups, while offering plenty of scope for sensors and other inputs in a standalone configuration or as an I/O expander in a HalTech environment. Each kit includes dash, connector, cables, momentary switches, and Wi-Fi antenna, along with a HalTech fabric key tag, quick-start guide, and stickers. Features: * Full-color, optically bonded TFT screen * 70-degree minimum viewing angle (vertical and horizontal) * 1280 x 480 resolution, 600+ lumens * IP64 (Dust-tight and protected against water splashes) * 6-digit odometer * 512MB of on-board looped data logging * NSP compatible * 10 user configurable AVIPs * 4 user configurable DPOs * 4 user configurable SPIs * 1 dedicated tachometer input * 1 dedicated alternator excite * 2 ambient light sensors
Not Yet Reviewed
$1,995.00
American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location
( 548 )
$1,528.55
—
$1,856.30
The new Racepak V300SD Easy Access Data Loggers include all the features and benefits of their successors, but now also include built-in pre-configured data analysis channels, enabling you to make quick decisions based on real data between rounds at the track. Equipped with a door car harness, these units are commonly used for Pro Stock, Pro Modified, Sportsman drag classes, and Land Speed. They come with DataLink software. Easy Access loggers no longer require the use of a security key, allowing you to look at your data with any laptop that has the latest version of Datalink V5 installed. * Out-of-the-Box, this system will data log: - Engine RPM - Drive Shaft RPM (Requires driveshaft collar, sold separately) - Accelerometer G-Meter - Lateral G-Meter - Battery Voltage * List of pre-configured data analysis math channels included in the DataLink V5 software: - Engine vs. Driveshaft Ratio - Clutch percentage slip - Clutch Slip Ratio - Trans Ratio - RR, LR, RF, LF Shock Velocity - Average Air/Fuel Ratio - Average Exhaust Gas Temperatures - CC's Per Turn (for Fuel Flow) - Track Time - G-Meter MPH, G-Meter Distance (Feet) - 60 ft., 330 ft., 660 ft., 1000 ft., 1320 ft. Clock Markers Features: * With sampling rates of up to 1,000 frames per second, the V300SD series of data recorders allow you to monitor up to 83 channels of sensor information * Unlocked math channels for the following calculations: Clutch Percentage Slip, Trans Ratio, Shock Velocity, Average AFR (Air/Fuel Ratio), Average EGT (Exhaust Gas Temperature), G-Meter MPH, and many more * The included SD memory card allows you to transfer your vital sensor information to your laptop quickly, getting you back in the lanes without fumbling with cables * The 83 total channels break down as follows: 72 V-Net; 4 Hard-wired Analog; 4 Hard-wired Digital; and 3 Internal Sensors (Battery Voltage, Accel/Decel G-Meter, and Lateral G-Meter)
Not Yet Reviewed
$1,749.95
AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.
( 2 )
$1,599.95
—
$2,099.95
The next evolution of Racepak display has arrived. Building on the foundation of the legendary Racepak displays that came before, the new 12.3 in. dash offers unparalleled customization and visibility. The high-resolution, high-brightness, high-contrast, and full-color capacitive touch screen lets you see your Racepak data like never before. Swipe through a variety of multi-purpose layouts on-the-fly! You can use one of the eight pre-configured screen layouts or build your own. Product features: * Plug-and-play support for all Racepak VNet loggers and devices, such as the V300SD, Sportsman, and G2X PRO * Capable of monitoring any VNET channel being broadcast from your Racepack datalogger or device * Dedicated CAN connection for Holley EFI (build V4 100 and newer) * 8 default background skins pre-loaded with unlimited options for importing custom layouts * User definable channel alarms and warnings can be used for oil pressure, AFR, or any other channel on your VNET stream * Quickly swipe between multiple active screens for warmup, race, or whatever you want to monitor * No stylus required, capacitive touch, just like your smart phone * Weatherproof aluminum housing featuring flexible mounting options * Manual or auto-brightness features for easy viewing day or night * Built-in GPS with odometer function (antenna included) * Expandable storage via USB (16GB memory stick included) * 6x 1/4 in.-28 mounting holes for surface or flush mounting, with high-quality hardware included * Includes everything needed for installation * USB keyboard and mouse functionality makes it quick and easy to setup new layouts * Upgradable with future software enhancements
Not Yet Reviewed
$1,999.95
On Sale
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 92 )
$1,899.95
$1,708.95
—
$1,899.95
On Sale
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$1,999.95
$1,573.95
—
$1,999.95
On Sale
These MSD 8-Plus CD ignitions produce the same extreme output as the original 8-series, yet they are now in a smaller housing with improved efficiency and internal components. The new 8-Plus ignitions feature built-in, 2-step rev control. Now you can switch between two rev limits without extra wiring or housings. For those who are looking for a dual-fire MSD 8, the MSD 8-Plus CD ignitions are all that you need. MSD's engineers were able to deliver ignitions that are capable of firing two coils at once for those extreme racers using dual plug race setups.
( 3 )
$2,099.95
$1,888.95
HalTech's Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications, recommended for engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. HalTech has been at the cutting edge of engine management technology since it first opened its doors in 1986. They're well-known for their high horsepower engine management, which complements their array of harnesses and add-ons. Product Overview: * Includes: Elite 2500 ECU with DBW and Race Functions, USB programming cable * Supports 1 to 12-cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position Inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software
Not Yet Reviewed
$1,959.00
Attention sportsman drag racers: Racepak IQ3D digital dash instruments offer a compact, all-in-one solution for data acquisition. Adding a robust, built-in data logger to the popular IQ3, the drag race versions display information on four user-definable pages—and recorded data is stored on a microSD memory card located on the face of the dash for easy access. You can record engine rpm, driveshaft rpm, oil pressure, water temperature, and battery voltage. Smarter racing; get onboard performance that could change the way you compete ... and win, with Racepak IQ3D. Racepak IQ3D drag racing digital dashes specifications include: * Programmable LED shift lights * User-defined 5-character sensor input names * Four programmable external warnings * Shielded, low-luster display for open cockpit use * Can add up to six additional V-Net channels
( 1 )
$1,799.95
Looking to add a Ford Performance Parts crate engine to your custom built vehicle? Take the complexity and mystery out of wiring your new build with Ford Performance Parts crate engine control packs! Features include: * Unique controls pack harnesses to replace stock body harnesses; designed for custom-built vehicles * OBD-II diagnostic ports to assist in vehicle calibration uploads and diagnosis of problems * PCMs with Ford Performance Parts performance calibration (custom calibration required on some engines and for aftermarket intake systems) * Electronic throttle control accelerator pedals, eliminating throttle cable routing problems * Power distribution modules * Requires return-type fuel system, will not work with returnless fuel system
( 1 )
$1,949.99
When weight is a factor, Braille Battery offers these no-weight batteries to save you some poundage. Features include: * Lightweight, dual terminal design * Brass or stainless steel terminals * No spill, no corrosion, no maintenance * Certified and fully charged
( 205 )
$1,524.99
—
$1,899.99
The new Racepak V300SD Serialized Data Loggers include all of the features and benefits of their predecessors, but now also include built-in pre-configured data analysis channels—allowing you to make quick decisions based on real data between rounds at the track. The new secured loggers protect your vital system data with a serialization number that is unique for each individual logger. This feature also allows you to quickly organize logs between rounds. V300SD units are commonly used for Pro Stock, Pro Modified, Sportsman drag race classes, and Land Speed. DataLink software is included. Kits are available for car doors, dragsters, motorcycles, or with universal 20 ft. harness. * Out-of-the-Box, this system will data log: -- Engine RPM -- Driveshaft RPM (requires driveshaft collar sold separately) -- Accelerometer G-Meter -- Lateral G-Meter -- Battery voltage * List of pre-configured data analysis math channels are included in the DataLink V5 software: -- Engine vs. driveshaft ratio -- Clutch percentage slip -- Clutch slip ratio -- Trans ratio -- RR, LR, RF, LF shock velocity -- Average air/fuel ratio -- Average exhaust gas temperatures -- CC's per turn (for fuel flow) -- Track time -- G-Meter MPH, G-Meter distance (feet) -- 60 ft., 330 ft., 660 ft., 1,000 ft., 1,320 ft. clock markers Features: * With sampling rates of up to 1,000 frames per second, the V300SD series of data recorders allow you to monitor up to 83 channels of sensor information * Unlocked math channels for the following calculations: Clutch percentage slip, trans ratio, shock velocity, average AFR (air/fuel ratio), average EGT (exhaust gas temperature), G-Meter MPH—and many more * The included SD memory card allows you to transfer your vital sensor information to your laptop quickly, getting you back in the lanes without fumbling with cables * The 83 total channels break down as follows: 72 V-Net; 4 hard-wired analog; 4 hard-wired digital; and 3 internal sensors (battery voltage, accel/decel G-Meter, and lateral G-Meter)
Not Yet Reviewed
$1,749.95
MSD Pro 600 CDI ignition boxes are 8-channel capacitive discharge ignitions designed for high cylinder pressure, high-horsepower engines running coil-near-plug ignition. When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail, MSD PRO 600 boxes are the answer. Features include: * Eight outputs of up to 680 mJ of energy * All necessary wiring harnesses included * Continuous 600 mJ operation, without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kilovolts output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 volts minimum required for starting and running * 12 volts minimum required for 600 mJ opereation * Maximum operating voltage 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Reverse battery protection * Protection against shorted or open coils, and over temperature * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power operation * Fits most coil-per-plug engines up to eight cylinders (including 4- and 6-cylinders) * Additional CAN based features, when used with Holley EFI * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$1,999.95
American Autowire Highway 15 Nostalgia wiring harness kits are designed to finally make it possible to wire your classic pickup the old-fashioned way--with a quality, cloth-wrapped wire. Before American Autowire introduced these kits, you literally had to wrap wire by wire yourself to do it the old-fashioned way, unless you were able to find the rare and pricey automotive electrician who had the skills to do it and was still willing to do it. If you're looking to give your classic pickup the old-time look only a cloth-wrapped wire can give it, American Autowire Highway 15 Nostalgia wiring harness kits are the only way to go.
Not Yet Reviewed
$1,812.60
Altronics Powerlite Pro Series lithium battery combo kits include a Powerlite Pro Series lithium battery, along with a 15 amp battery charger. Powerlite lithiums are the latest technology in an extremely lightweight high-power battery. They feature an advanced BMS (Battery Management System) that controls all aspects of the battery—not only for protection, but also for reliability and longevity. Order the model with the voltage and amps needed for your application. Benefits of Powerlite Pro Series lithium battery kits: * Pro Series BMS protects from under/over charge, short circuit, over temperature, and low-voltage cutoff * Pro Series batteries allow for charger to be connected during storage periods to fully maintain battery * Much more stable voltage and current output over lead acid models Battery features include: * Carbon fiber case * Removable SAE post for bolt/crimp terminal cable connection * Extremely lightweight lithium battery * Longer life expectancy * Charges faster than other battery types * A "Green" product; environmentally safe * RoHs and UN DOT safety-approved
Not Yet Reviewed
$1,649.99
—
$1,799.99
HalTech's Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. Recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional product details: * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range, or HalTech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger-type support * Up to 45 channels of Input & Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Outputs: Up to 4 injector and 4 ignition * Suits: Popular late-model performance and racing applications. Recommended for 4-cylinder, DBW or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. * Includes: Elite 1500 ECU with DBW and Race Functions, USB programming cable and software on a USB drive * Notes: Available with universal wiring, terminated engine harnesses, or model-specific plug-n-play adapter kits
Not Yet Reviewed
$1,599.00
Summit Bucks
FAST EZ-EFI 2.0 Multi-Port Retro-Fit kits allow owners of existing factory or aftermarket multi-port fuel injected applications and intake manifolds to experience the benefits of an EZ-EFI 2.0 system with no limit on horsepower—because the systems are based on each customer's supplied injectors. The next generation of the revolutionary self-tuning EZ-EFI has been upgraded with more features than ever before. Yet it maintains ease of use that doesn't require a laptop or tuning experience. As with the original EZ-EFI, simply hook up the system, answer the Setup Wizard questions on the hand-held, and EZ-EFI 2.0 tunes itself as you drive. The new high-quality wiring harness (with a sleek mesh-type loom) uses commonly available late model OEM sensors for accuracy and durability. The EZ-EFI 2.0 has an updated hand-held, as well, featuring the industry's first color touch screen. Self-powered through the ECU rather than requiring an outside power source, it shares the same mounting points as the Garmin Nuvi GPS—meaning there are nearly limitless mounting options (suction cup mount is included with all kits). Serving as the Setup Wizard initially, it then becomes an electronic gauge screen. The hand-held has various advanced features, including screen hide/sleep function, expanded diagnostics and data screens, plus intuitive navigation. Electronic fuel pressure measurement is standard on all kits—and all kits work with wet nitrous systems, providing built-in nitrous timing retard and special nitrous AFR targeting. EZ-Ignition features an EZ-Solution option, meaning that it is plug-and-play with FAST Dual-Sync distributors for electronic timing control, or can be used with an EFI distributor of your choice and a FAST crank trigger. Or the system can be used to control fuel only and be used with a standard carb-type distributor where timing is set manually. Experience the advantage of fuel injection without the headaches; order a FAST EZ-EFI 2.0 Multi-Port Retro-Fit kit.
( 10 )
$1,589.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
