Availability
Borla S-Type II axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type II axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies often associated with resonance or drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type II axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type II axle-back exhaust systems.
( 25 )
$1,653.99
—
$1,736.99
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
( 26 )
$1,552.99
Stainless Works Legend Performance Connect exhaust systems with X-pipes will improve the sound and performance on your Mustang. Stainless Works has engineered a drone-free aggressive muffler tuned specifically for this improved coyote engine from Ford. In addition to the tuned mufflers, they've also utilized 3 in. tubing in their X-pipe crossover for an improvement in flow over the stock exhaust. Finishing the system, Stainless Works employs polished quad tips with a double-wall conical style. Stainless Works Legend systems are built from corrosion-resistant 304 stainless steel and are TIG-welded in their state-of-the-art facility. Features and benefits include: * Legend System—designed for the daily driver * Performance Connect for a full 3 in. exhaust * 3 in. mandrel-bent tubing * Tuned mufflers for aggressive muscle car sound * Quad polished tips * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$1,539.95
—
$1,965.20
aFe Mach Force XP exhaust systems are constructed of mandrel-bent stainless steel and come complete with free-flowing muffler(s), OE-style bayonet hangers, flanges, and band clamps, plus all hardware necessary for a hassle-free installation. Offered in single, dual, or quad muffler configurations, their smooth curves and large diameter tubes help reduce restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. Available in cat-back, axle-back, and downpipe-back designs, almost all Mach Force XP exhausts are direct bolt-on systems that require no cutting or drilling and include all necessary hardware for a hassle-free installation. Most also include wrinkle-black powdercoated or polished 304 stainless steel tip(s) with a laser-cut stainless steel aFe power badge. Select models have carbon fiber tips with CNC-machined laser-etched inserts. aFe Mach Force XP exhaust systems are an ideal combination of performance, fit, and value. Additional features include: * Fit a variety of light trucks and cars, including European models * Available with 409 or 304 stainless tubing (varies by model) * "Stepped design" models increase exhaust velocity creating a broader torque curve throughout the rpm range * Straight-through, free-flowing stainless steel mufflers absorb high-pitch tones producing powerful sound * Leak-free 360-degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Several versions convert OE single exhaust to dual exhausts * Where applicable, incorporates an exhaust valve that uses the OE exhaust valve motor (not included) to regulate exhaust flow * Some systems use a unique resonance chamber to replace the OE muffler; produces a weight savings of up to 15 lbs. * Hi-Tuck design of specific models provide extra ground clearance when using an aftermarket suspension kit Note: Some aFe Mach Force XP systems are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 36 )
$1,505.70
—
$2,178.75
On Sale
Stainless Works CNC mandrel-bent exhaust systems are the simply the best for improving your vehicle's performance, sound, and mileage. Made of high-grade 304 stainless steel, they offer an array of options to unleash more torque and horsepower while delivering the sound your vehicle has been lacking. Most are designed to use factory hangers. Stainless Works not only offers their Factory Connect option that mates to a factory connection point, but also Performance Connect options for many models. Performance Connect gains more performance than factory connection points allow, and they require the installation of Stainless Works headers (sold separately) to gain the full performance benefit. Stainless Works also builds their mufflers entirely of stainless steel. They will never "burn in," "blow out," or change their tone—ever. Choose from a selection of universal or application-specific muffler designs, including turbo chambered (loud), chambered round (louder—can be reversed for an even more aggressive sound), and turbo S-tube (loudest—may be too aggressive for a daily driver). Additional features of Stainless Works CNC mandrel-bent exhaust systems include: * 304 stainless will never red-rust like cheaper 409 stainless * TIG-welded for strength * Durable 3/8 in. thick flanges * Mandrel-bent (no buckling) for optimal flow * Variety of tip options (varies by application) * Truck exhausts available with three exit locations: behind the passenger tire; under the rear bumper (one on each side); and in front of the passenger tire * Install-Ready; all systems come with all necessary parts to make installation as smooth as possible
( 30 )
$1,697.65
$1,518.95
—
$2,058.65
Ford Performance Parts 2010-18 Taurus SHO Touring exhaust systems bolt directly to the stock factory catalytic converters, making your Taurus SHO 100 percent emission compliant, while providing an aggressive muscle car sound. These cat-back exhaust systems feature tuned stainless steel mufflers with 4 in. chrome plated stainless steel tips, so they not only sound great but look great too. Additional details: * Uniquely designed and tuned to provide optimum performance, aggressive sound, durability, and pure driving excitement * Meets 95 decibel drive-by noise standard for aftermarket exhaust systems, when installed on stock applications * Manufactured from high-quality 304 stainless steel * Features ultra-smooth mandrel bends, warp-free flanges, and superior craftsmanship * Bolts to stock catalytic converter * 2.25 in. stainless steel cat-back tubing * 4 in. chrome plated stainless steel tip * Uses stock hangers and mounts
( 1 )
$1,528.99
MBRP Armor Pro Series exhaust systems are designed and built for the most serious enthusiast who will settle for nothing less than top of the line. Optimized durability is provided by the mandrel bent T304 stainless steel construction, additional benefits of this material are its ability to be easily cleaned while withstanding extreme conditions, on or off the road. All of the tubing is mandrel bent for maximum exhaust flow and mandrel bending ensures no rippling in the bends. The end result is that these exhaust systems give you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. In addition, these exhaust systems bolt to the OEM exhaust hangers and includes all necessary hardware to complete the installation.
( 4 )
$1,509.99
—
$2,139.99
Virtually indestructible, Banks Power TorqueTube exhaust headers maximize exhaust extraction, unleashing gobs of torque. Manufactured from 100 percent heavy-wall stainless steel, they are mandrel-formed to tune the exhaust flow for maximum torque in your truck or motorhome. And unlike restrictive stock setups, Banks TorqueTubes literally pull out the exhaust, slashing backpressure and unleashing greater torque, helping the intake stroke to draw in more air. Squeeze more performance out of your engine; choose a pair of Banks TorqueTube exhaust headers designed for your vehicle. Each set may include additional components. Features: * Maximize exhaust extraction * Flanges welded on both sides, then milled flat * Seamless high-velocity collector * Ultra-thick flanges won't warp/flex * No sealant/gaskets needed Please note: Unless otherwise stated, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 11 )
$1,699.00
—
$1,869.00
On Sale
Spool up your turbo faster and get rid of exhaust quicker using Stainless Works turbo downpipes. They are manufactured from quality 304 stainless steel and are CNC mandrel-bent to ensure a good fit and sealing. In addition, they're available either with catalytic converters for street use, or without them for off-road use.
Not Yet Reviewed
$1,757.50
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant universal catalytic converters help keep the check engine light off. They offer the right fit for a wide array of vehicles thanks to the adaptable universal design (cutting and welding is required). With highly corrosion-resistant, stainless steel construction, you can have confidence in the quality of these catalytic converters. They are designed to meet or exceed California Air Resource Board requirements and have undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states.
( 2 )
$1,517.00
—
$1,710.00
Clearance
APEXi N1 Evolution Extreme Exhaust Systems are based on the proven performance basics of the N1 muffler—which emphasizes optimum exhaust efficiency utilizing a straight-thru layout design. They are equipped with an internal hybrid silencer uniting power and free-flowing characteristics with effective functional sound resonance. A newly adopted muffler tip completes the tail-end of the exhaust that serves both purposes of function and form. Many options are available, including muffler quantity, inlet/outlet quantity, and tip material/shape/size. Order the system recommended for your vehicle. Additional details: * High level of quality using TIG-welded SUS304 stainless steel, uniting quiet performance with high-power performance gains * Matched and manufactured for select chassis * Patented Megaphone piping structure to produce excellent torque and throttle response throughout the powerband. This piping design allows for a swirling exhaust gas flow effect that has for years produced proven results
Not Yet Reviewed
$2,498.99
—
$2,898.99
$1,624.50
—
$1,884.50
APEXi N1-X Evolution Extreme Exhaust Systems are based on the proven performance basics of the N1 muffler—which emphasizes optimum exhaust efficiency utilizing a straight-thru layout design. They are equipped with an internal hybrid silencer, uniting power and free-flowing characteristics with effective functional sound resonance. A newly adopted muffler tip completes the tail-end of the exhaust that serves both purposes of function and form. Most of the tips are constructed with a lightweight titanium material rolled and riveted onto a double pipe structure; this acts as a diffuser enabling temperature reduction, while retaining a sporty heat gradiation appearance. Many options are available, including system style (cat-back, rear axle-back, etc.), exit location, pipe diameter, muffler quantity, inlet/outlets, tip size, and more. Order the model recommended for your vehicle. Additional details: * N1-X Evolution Extreme titanium tips are specially designed with clearance to reduce heat transfer * Top-level quality using full TIG-welded SUS304 stainless steel * Matched and manufactured for select chassis * APEXi intricate designed brackets * Resonated mid-pipe structure * Comfort with optimal performance gains
Not Yet Reviewed
$1,598.99
—
$2,048.99
American Racing Headers 5th Generation Camaro headers are designed to work with ARH's midsection X-pipes and H-pipes to handle huge power, even on supercharged applications. Available with or without catalytic converters, they are offered in a variety of primary sizes and collector diameters. Each primary tube is sized to generate the greatest horsepower with the least amount of restriction. State-of-the-art, high-flow merge collectors are tuned for maximum horsepower and torque. Available in a choice of styles, Gen 5 ARH long systems are designed to allow you to reuse your factory mufflers or attach to aftermarket axle-back exhausts with a simple mark and cut (no welding required). Short systems typically require minor fabrication to adapt to the midsections of either factory or aftermarket exhausts. Gen 5 Shorty headers are a direct fit to your factory cats; some modification may be required. Additional features of American Racing Headers 5th Generation Camaro headers include: * Offered for V6 and V8 applications * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * Systems include necessary gaskets and hardware for installation * The only set of headers you should ever need to buy
( 1 )
$1,530.26
—
$2,179.46
Eddie Marine EMI Thunder 496 Chevy high performance risers are made from stainless steel, and are designed with extended length to keep the exhaust dry for longer durations—a must for engines susceptible to water reversion. The risers have integral 10mm bungs to accommodate Merc 496 water temp sensors. Eddie Marine EMI Thunder 496 Chevy high performance risers are also available in taller versions for some Merc systems that use 3 in. riser spacers. Additional product features: * Stainless steel risers * Riser gaskets * Stainless steel mounting studs, nuts, and washers * Jumper hoses, clamps, and fittings
Not Yet Reviewed
$1,886.95
Give yourself a competitive edge with the Race Series AT-2 exhaust systems from Yoshimura. These exhaust systems are designed with nothing but power in mind—and the sound of the Alpha-T 2 exhaust systems are absolutely unmistakable Yoshimura! Each Race Series exhaust system is developed in accordance with noise compliance regulations imposed by most racing sanctioning bodies worldwide. In addition, the Race Series AT-2 exhaust systems' "Works Finish" takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components that Yoshimura's factory racers use. One look at a Yoshimura Race Series AT-2 exhaust system—plus, its sweet exhaust note, you know it's something special! Key features and benefits: * All applications are marked with appropriate EPA noise emissions labels * Noticeable gains in max horsepower and max torque * Sheds weight compared to stock exhaust * Stainless steel construction with aggressively styled carbon fiber end cap and uses a facet-formed tip matte carbon fiber heel guard * Yoshimura "Works Finish" for lasting durability; uniform heat coloration really gives the system a titanium look when it's been through a 15-20 minute heat cycle * For closed course competition only; not intended for street use; has not been tested for EPA noise compliance
Not Yet Reviewed
$1,509.00
—
$1,699.00
On Sale
APR cat-back exhaust systems personalize your vehicle's looks, sound, and performance. Beautifully hand-crafted T304 stainless steel components adorn the system, with stunning TIG welding throughout. The straight-though brushed finish mufflers smooth the exhaust note to a deep growl, without adding restrictions, while the Helmholz resonator reduces unwanted frequencies. Strong high-quality bracketry and OE-style clamps hold the system steadily in place, making the install or removal a snap—and fitment simple, yet precise. Additional details: * Low-profile design, suitable for lowered vehicles * Larger diameter piping and tips, compared to stock * No increase in weight, compared to stock * Limited lifetime warranty
Not Yet Reviewed
$1,599.95
—
$1,999.95
APR cat-back exhaust systems with front muffler personalize your vehicle's looks, sound, and performance. Beautifully hand-crafted T304 stainless steel components adorn the system, with stunning TIG welding throughout. The straight-though brushed finish mufflers smooth the exhaust note to a deep growl, without adding restrictions, while the Helmholz resonator reduces unwanted frequencies. Strong high-quality bracketry and OE-style clamps hold the system steadily in place, making the install or removal a snap—and fitment simple, yet precise. A cast 3 in. (or 2.5 in., depending on model) to quad 2.5 in. rear splitter creates an ultra-smooth transition, steadily feeding exhaust gasses out of the system, while looking tidy from under the rear bumper. APR's cast valve housings enable the vehicle to be fitted with the factory electronic valve actuators, retaining OE valve operation. Some cat-back models also include removable 4 in. polished slash-cut exhaust tips finish the system, adding a classy motorsport-inspired touch to the rear of the vehicle. Order the system recommended for your vehicle application. Cat-back systems come standard with a single muffler, but this model adds the front triangular muffler as an upgrade for those who prefer a quieter exhaust. The mufflers are responsible for tuning the exhaust note—and do so without adding unnecessary restrictions to the system. Each unit features a straight-through perforated tube that's tightly wrapped with stainless steel and fiberglass material. Additional details: * Low-profile design, suitable for lowered vehicles * Larger diameter piping and tips, compared to stock * No increase in weight, compared to stock * Limited lifetime warranty
Not Yet Reviewed
$1,599.95
On Sale
Dinan valved exhaust systems are available in cat-back and rear axle back options for a variety of Toyota applications. These exhausts convey the sweet sounds of a deep, rich, euphonious note that are unmistakably Dinan; in addition to retaining the flexibility of valves, Dinan exhausts are the epitome of sound without sacrifice. Utilizing factory cut points and mounting mechanics, Dinan exhaust systems are a straightforward install with precision fitment, just like you'd expect straight from the manufacturer. Mounting and proper fitment is where the similarities to the factory exhaust end, however. Fabricated from brushed 100 percent T304 stainless steel, TIG-welded and free of hydroformed pipe, each upgraded system is a marked improvement from its predecessor—both in terms of material/construction and overall looks. For weight savings and simplicity, the stock single-to-dual pipe setup has been abandoned in favor of an enlarged, free-flowing single pipe system. This pathway feeds into a muffler that limits frequencies associated with drone, as well as assists in altering the overall tone of the setup to deliver the signature low Dinan rumble. The no-nonsense design allows shocking versatility in sound levels when paired with features, like valves, often associated with more fanciful alternatives. The unabashedly spartan, yet effective, pipe layout forces gasses to escape from the rear out of massive dual, straight cut, 114.3mm (4.5 in.) exhaust tips emblazoned with the laser-engraved Dinan logo. The tip branding further cements any lingering doubt that the system visible is something above and beyond stock. Unquestionable enhancements to the overall chorus emitted through the Dinan system transcend all modes, making the vehicle a delight to drive and enjoy. However, for those who want options to limit the extraordinary soundtrack for late night or early morning arrivals/departures (or any number of other reasons), factory valve control is retained. This effectively makes the system behave similarly to a straight-pipe system that promotes maximum flow and volume when the valve is open—and emit more subdued resonant vocals when the valve is closed; and exhaust gases are wholly redirected through the muffler. It's the perfect blend of civility when not pushing the car or the full spectrum of auditory delight when in it. No matter the situation, Dinan valved exhaust systems are the answer for discerning enthusiasts looking for sound without sacrifice. Additional product features: * Maximum gains of +6 HP and +5 lbs.-ft. of torque * Enjoyably louder, sportier sound * Drone abatement technologies used to reduce cabin resonance * Dual 4.5 in. (114.3mm) double-walled clamp-on tips with laser-engraved Dinan logo * Larger diameter piping for increased flow (83mm throughout primary run vs. 80mm at largest point) * 100 percent 304 stainless steel construction * Retains factory valve control * Factory-like fitment with included mounting hardware * Tips available with polished or black ceramic coated finish
Not Yet Reviewed
$1,599.95
Hybrid Racing offers Formula exhaust systems for applications such as the 2017-21 Honda© Civic Type-R. Performance driving is an exhilarating blend of adrenaline and theater. In this realm, the FK8 Civic Type-R is one of Honda's finest creations in the last two decades, showcasing remarkable capabilities. Yet, amidst its prowess lies a significant drawback: its sound. The engine's muted, subdued tone fails to mirror the true potential of the K20C powerplant. Hybrid engineers assembled a system laden with features: * Durability, reliability, and superior performance * Integrates seamlessly into the driving experience, enhancing power and efficiency * Distinctive innovation in an oversaturated market * Affordability * Each part accentuates the Type-R's innate character * Custom-designed flanges and specialized hardware ensure a seamless assembly that guards against any possibility of leaks * The resonator and muffler are exclusive, original creations meticulously engineered to deliver perfect sound explicitly tailored for these vehicles * Strategic placement of the electronic valve and the inclusion of dual adapters within the mid-pipe exemplify Hybrid's commitment to versatility and compatibility. This thoughtful design enables perfect bolt-on integration with any front pipe, offering flexibility without compromising performance or time * Dry-carbon fiber rear trim panel elevates aesthetics and personalization, an elegant addition offering a unique style. * Rear muffler's adjustable hangers grant you complete control over alignment, ensuring the system sits precisely as desired * Exhaust tip options include straight and slanted
Not Yet Reviewed
$1,899.99
On Sale
Stainless Works Legend Factory Connect exhaust systems with X-pipes will improve the sound and performance on your ride. Stainless Works has engineered a drone-free aggressive muffler tuned specifically for your car's V8 engine. In addition to the tuned mufflers, they've also utilized 3 in. tubing in their X-pipe crossover for an improvement in flow over the stock exhaust. Finishing the system, Stainless Works employs polished or matte black quad tips with a double-wall beveled style. Stainless Works Legend systems are built from corrosion-resistant 304 stainless steel and are TIG-welded in their state-of-the-art facility. Features and benefits include: * Legend System is designed for the daily driver * Factory Connect—necks down at factory connection point * 3 in. mandrel-bent tubing * Tuned mufflers for aggressive muscle car sound * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$2,196.40
$1,661.55
—
$2,196.40
The Kooks Headers Super Street Series headers are a huge improvement over the stock pipes, with large primaries, collectors, and 3/8 in. flanges for sealing superiority. These headers are meticulously made and fit precisely into the engine bay of your ride. In addition to perfect fit, the headers are constructed from 304 stainless steel, which provides rust resistance throughout the life of the product. Super Streets are designed to be a direct-fit replacement for the factory manifolds, bolt right up to the factory pipes, and will provide a proven horsepower increase and corresponding torque gain throughout the powerband. No cutting or welding is required for installation. These headers were designed with performance in mind and weigh significantly less than the factory manifolds. Order the model recommended for your vehicle.
Not Yet Reviewed
$1,938.23
Instant Rebate
ZyCoat ZyBar thermal coating is a high temperature thermal dissipation coating for headers, manifolds, turbos, and exhaust systems. By greatly reducing radiant engine heat, ZyBar improves scavenging performance to boost torque and increase horsepower. Utilizing advanced, micro-surface technology, even a very thin .001 to .0012 mil coating of ZyBar outperforms conventional tapes, wraps, ceramic, or powder coatings. ZyBar's improved engine performance was confirmed by measuring header surface temperature reduction versus stock, uncoated headers. Utilizing revolutionary, lightweight micro-surface technology, ZyBar significantly reduces surface temperatures which, in turn, lowers under-the-hood temperatures, and lessens the need for heavy wraps, tapes and shields. Additional features of ZyCoat ZyBar thermal coating include: * Lower applied cost … less than 1/3 the cost of ceramic coating * Increased scavenging performance for increased engine performance * Color stability and corrosion resistance * Conquers temperature extremes up to 2000+ degrees F * Reduces radiant heat by over 90 percent * Accelerates thermal flow to increase horsepower * Resists rust and corrosion--won't chip or crack * Spray, dip, or wipe application * Choice of colors
( 15 )
$1,709.99
aFe Gemini XV Series exhaust systems produce power gains, aggressive sound, and awesome style. These cat-back systems are built from 3 in. mandrel-bent 304 stainless steel tubing and feature an electronically controlled exhaust cutout valve to quickly switch between mild and aggressive tones at the push of a button. Utilizing state-of-the-art computer-aided design technology, Gemini XV systems are designed for custom, high-tolerance factory fitment. They utilize factory-style hangers for a secure fit and hassle-free installation, and their construction offers race-proven strength and durability. aFe Gemini XV exhaust systems include two key fob remotes, control module, valve motor, and all necessary wiring. Additional features include: * Dual black or polished 304 stainless steel clamp-on exhaust tips * Tips feature an aFe POWER logo plate riveted on for a unique style * High-flow stainless steel muffler (finish may vary) * 100 percent MIG-welded for race-proven strength and durability * All necessary hardware is included
Not Yet Reviewed
$1,554.00
—
$2,178.75
On Sale
Stainless Works Legend Factory Connect exhaust systems with H-pipes will improve the sound and performance on your Mustang. Stainless Works has engineered a drone-free aggressive muffler tuned specifically for this improved coyote engine from Ford. In addition to the tuned mufflers, they've also utilized 3 in. tubing in their H-pipe crossover for an improvement in flow over the stock exhaust. Finishing the system, Stainless Works employs polished quad tips with a double-wall conical style. Stainless Works Legend systems are built from corrosion-resistant 304 stainless steel and are TIG-welded in their state-of-the-art facility. Features and benefits include: * Legend System is designed for the daily driver * Factory Connect—necks down at factory connection point * 3 in. mandrel-bent tubing * Tuned mufflers for aggressive muscle car sound * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$2,196.40
$1,965.20
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
