Availability
Built for racers and engine builders who craved the performance, Moroso racing vacuum pumps are manufactured from billet aluminum and feature a precision-machined shaft, rotor, and bearings that will withstand the rigors of racing. They work by producing high crankcase vacuum, which increases power by improving ring seal, preventing blowby, and detonation. Allowing the use of lower-tension piston rings for less friction. These positive pumps are much more consistent and effective than header-mounted evacuation systems.
( 5 )
$1,599.99
Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included
( 11 )
$2,249.99
—
$2,299.99
On Sale
Wanting to deactivate the Multi-Displacement System of your Hemi vehicle will require a few things, including a non-MDS camshaft and components. Summit Racing™ Gen III Hemi MDS delete kits are offered in versions designed for engines with or without Variable Valve Timing (VVT). They contain premium components (except programmer) to help you complete the job. Each Summit Racing™ delete kit will include a head gasket set, timing cover gasket, non-MDS lifters, replacement cylinder head fasteners, non-MDS solenoid plug, and camshaft, along with valve springs and/or camshaft phaser limiters. Choose the combo designed for your vehicle.
Not Yet Reviewed
$1,585.80
—
$1,735.79
$1,525.21
—
$1,675.20
Save weight and gain the extra horsepower that will get you into the winner's circle! These high performance kits feature less-tension-required belts and lightweight billet aluminum pulleys and components. Make your setup efficient to produce the horsepower that you want with Jones Racing complete belt drive kits. Kits include the following parts: * Aluminum short-style water pump * Power steering pump * Lightweight aluminum one-wire alternator * Billet pulleys and brackets * Belts * Mounting hardware and spacers
( 1 )
$1,529.50
—
$1,688.59
Summit Racing™ Pro LS crank and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. Order the kit recommended for your vehicle and engine. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in.
( 1 )
$1,539.98
These billet serpentine systems are easy to install, budget friendly, and styled just right. Summit serpentine belt systems start with a CNC-machined, 1/2 in. thick, 6061 T6 billet aluminum face plate, which has positive belt adjusting holes for both the alternator and A/C pump, plus beveled edges and a machined Summit logo. You also get CNC-machined 6061-T6 billet aluminum crank, water pump, alternator, power steering, and clutch cover pulleys, plus a chrome 105 or 140 Amp alternator, a chrome Sanden SD-7 A/C compressor with manifold lines (as noted), an as-cast aluminum GM Type 2 power steering pump (as noted), an as-cast GM high-flow water pump, a serpentine belt, and all the mounting hardware you need. It might look fancy, but adjustments are easy, all you need is a pinch bar and a socket wrench.
( 10 )
$1,595.99
—
$1,888.99
Brodix Cylinder Heads Race-Rite oval port cylinder heads for big block Chevys bolt on directly in place of your stock heads, so you can reuse your intake manifold and pistons. Because the stock exhaust ports are in the stock location, you don't have to worry about header or manifold interference. These aluminum heads are great for street and strip applications. They feature 119cc combustion chambers, air conditioner bracket holes, solid phosphorous bronze guides, high-torque 270cc intake ports, a fully machined valve cover rail, and bulletproof rocker stands.
( 24 )
$1,551.99
—
$1,713.99
Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Precision wrist pins and retainers * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control
( 19 )
$1,500.97
—
$1,505.97
Jones Racing SBC 602/604 crate engine V-belt drive system kits are designed for maximum Circle Track racing efficiency. The folks at Jones Racing Products spent a lot of time finding the perfect balance of cooling and performance from these kits. They have everything needed to complete the front of the GM crate Circle Track long block. These kits are supplied with all the necessary belts, spare belts, mounting hardware, and spacer. Kit also includes: * Aluminum short water pump * Aluminum power steering pump with built-in tank * Mini lightweight aluminum one-wire alternator with 45 amps at idle/70 amp max * Billet aluminum brackets and pulleys
Not Yet Reviewed
$1,553.47
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 12 )
$1,539.99
—
$1,999.99
Moroso drag race oil pans are available for hundreds of vehicle-specific applications. The sizes and configurations are built for easy installation and optimum performance. Our selection includes a variety of styles, materials, and fluid capacities for drag racing, street and strip, and road race usage. Order the replacement model designed for your ride.
( 58 )
$1,750.99
—
$1,932.99
Pro-Filer small block Chevy All American Race Series CNC-ported cylinder heads raise the performance level over as-cast small block Chevy heads. Their 68cc CNC-machined combustion chambers and 235cc CNC-ported intake runners allow for the use of 2.125 in. O.D. intake valves over 335 cfm of airflow. Each unit is cast from aerospace A356 aluminum alloy and includes improved solid rocker bars for stability, drilled and tapped end pads, and revised spark plug locations for improved flame travel. For all-around performance on land or sea, install Pro-Filer small block Chevy All American Race Series CNC-ported cylinder heads. Additional Information: * Bronze guides for reduced stem wear * Available with or without water jackets * For 400+ c.i.d. engines * Use gasketed 3/4 in. reach plugs like NGK R5671-7 Series, or colder
( 1 )
$1,574.99
—
$2,026.75
Diamond Pistons Race Series pistons will withstand some serious horsepower for your high performance engine. These 2618 aluminum pistons are not only significantly lighter than the factory pistons but also superior in strength. The 2618 alloy is specifically for high-horsepower, nitrous, and boosted engines making up to 2,000 hp. Diamond Pistons Race Series pistons feature: * 3D milling on piston crowns for "ready to install" finish * Inside design forging with fully machined underskirts for maximum strength * Valve pockets designed to work with most aftermarket cylinder heads * Side gas ports for better ring seal * Moly skirt coating for friction-loss and skirt-wear protection * Premium H-13 wrist pins included; chamfered for round wire locks
( 1 )
$1,687.99
Mahle forged diesel race pistons are designed to withstand the extreme cylinder pressures of your high-boost diesel engine! Forged from strong aluminum alloy, these race pistons are machined for less weight and low compression ratios. With almost 90 years of racing heritage and technology, Mahle knows what your high performance diesel needs to keep performing! The piston skirts receive a Grafal coating to optimize performance by reducing drag, scuffing, and friction. Get a competitive edge for your diesel-powered race rig with Mahle forged diesel race pistons.
Not Yet Reviewed
$1,589.70
—
$1,710.46
COMP Cams Race XD mechanical roller lifters are strong, durable, and versatile. They feature a lightweight modular design with interchangeable pushrod seats. Available in medium or large offsets with left or right placement, Race XD lifters are configurable to clear the most extreme intake angles. Two finishes are offered: REM finished bodies create an extra-smooth surface for reduced lifter body and bore wear; and the DLC-coated bodies further minimize friction for the ultimate in durability. For excellent strength in extreme operating conditions, COMP Cams also enhances their Race XD lifters with a proprietary bronze alloy roller wheel bushing and an oversized captured link bar to connect the individual lifters. In an effort to eliminate the culprit of most roller lifter failures, these bushed solid roller lifter sets have oiling systems that ensure consistent roller wheel and axle lubrication. Order the lifters recommended for your year/make and engine application.
Not Yet Reviewed
$1,645.95
—
$1,699.95
Victor and Victor Jr. Series aluminum heads are designed using the latest induction technology for outstanding performance and maximum horsepower. They're ideal for the small block Ford Windsor, and small and big block Chevys. Victor Jr. Series heads are perfect for many types of competition and ultra-high performance street machines. They include threaded inserts (heli-coil) in rocker stud and exhaust manifold bolt holes. They have hardened seats and bronze valve guides for strength and durability, and a minimum 9/16 in. deck thickness and machined valve cover rails provide a more consistent gasket seal. Victor Series heads are a step above the rest, for even greater gains in horsepower. All of these heads feature reinforced rocker stud bosses, high-flow intake/exhaust ports, and specially contoured combustion chambers.
( 2 )
$2,212.50
Mahle forged diesel race piston and ring kits are designed to withstand the extreme cylinder pressures of your high-boost diesel engine. Forged from strong aluminum alloy, these race pistons are machined for less weight and low compression ratios; and to reduce drag, scuffing, and friction the piston skirts receive a Grafal coating to optimize performance. The kits include a set of high-quality piston rings to get you all sealed up. With almost 90 years of racing heritage and technology, Mahle knows what your high performance diesel needs to keep performing. Get a competitive edge for your diesel-powered race rig with Mahle race piston and ring kits.
Not Yet Reviewed
$1,589.70
System 1 racing Hemi wet sump oil pumps are engineered for high-volume racing applications and recognized as the finest on the market today, as well as employed by leading teams in many venues. These custom-made, CNC-machined billet aluminum pumps are offered with several options to provide the lubrication needed for your A/Fuel, Top Fuel, or Funny Car application. Hemi wet sump oil pumps are available with 1.8, 2.1, 2.4, 2.7, and 3 in. tall gears to provide the desired volume (up to 50 gpm) and pressure (available with adjustable 80 to 125 psi and 125 to 250 psi ranges) for virtually every application from fuel-injected to nitro-burning supercharged "Big Show" cars. These System 1 racing pumps feature four apertures, a -16 AN, -20 AN, or special -16 AN quick-disconnect fitting for use with their special scavenging hose, a -12 AN in/out for the filter, and a -8 AN ORB (O-ring boss) port for functions like an oil pressure gauge, on-board computer sensor, or rear oiling.
Not Yet Reviewed
$1,501.99
Trick Flow Twisted Wedge® Race 195 cylinder heads are perfect for big bore Ford Modular 2V engine builds as well as engines with superchargers or turbos, high compression E85, big shot nitrous oxide, and other mega-power combinations. The secret lies in the CNC-profiled Twisted Wedge combustion chambers and intake valves moved to the opposite side of the cam. These features provide dramatic increases in mid-lift airflow, piston-to-valve clearance, and valve-to-bore clearance for using higher lift cams and larger valves without altering bore size or flycutting pistons. Trick Flow Twisted Wedge Race 195 heads have fully CNC Competition Ported runners with a premium high resolution surface finish for ultimate performance. Larger, stronger valves and race-duty valvetrain components give these heads 8,000-plus rpm capability. Other features include OE PI-style intake inlets, patented replaceable cam bearing journals (no more junking heads because of trashed cams!), 3/4" thick decks, and 3/4"-reach spark plugs. Trick Flow Twisted Wedge Race 195 heads fit all 2V Romeo and Windsor engines and accept all OE-style camshafts, followers, lash adjusters, valve covers, and most OE Ford front covers. The heads are available fully assembled or as bare castings. Sold individually.
( 2 )
$1,849.99
Save weight and gain extra horsepower that will get you into the winner's circle! These high performance kits feature less-tension-required belts and lightweight billet aluminum pulleys and components. Make your setup efficient to produce the horsepower that you want with Jones Racing complete belt drive kits. Kits includes the following parts: * Power steering pump * Lightweight aluminum one-wire alternator * Billet pulleys and brackets * Belts * Mounting hardware and spacers
( 1 )
$1,548.61
Save weight and gain the extra horsepower that will get you into the winner's circle! These high performance kits feature less-tension-required belts and lightweight billet aluminum pulleys and components. Make your setup efficient to produce the horsepower that you want with Jones Racing serpentine drive kits.
Not Yet Reviewed
$1,813.87
Diamond Pistons Small Block 23 Degree Race Dome Series pistons are available for a variety of applications, including many Chevy V8 Gen 1 engines from 1968-2001. Forged from aluminum with two valve reliefs, the dome-style pistons are offered in different bore and stroke sizes, along with numerous other options. Order individually or in a set of 8. Additional details: * 900 hp rated * Forced pin oilers from the oil ring * Pin fitted * Later gas ports * 3-D dome and pockets * Pins, locks, and support rails (if required) included
Not Yet Reviewed
$1,619.98
—
$1,755.94
Dart Race Series 18 degree cylinder heads (for small block Chevy) delivers features that put you ahead of the competition! Dart refined the rolled valve angle design to give you more versatility, more performance, more reliability and higher quality. Features include: * Premium alloy: Dart aluminum heads are cast from virgin 355-T61 aerospace alloy for superior strength and integrity * Shallow combustion chamber design to improve combustion and allow the use of larger valves for improved airflow * Refined intake port design reduces turbulence and improves air/fuel flow * 67cc as-cast chamber volume can be machined down to 48cc * Interlocking ductile iron valve seats are compatible with stainless steel or titanium valves * Valve seats will accommodate up to 2.180 in. intake and 1.625 in. exhaust valves * Extra thick decks for 9:1 engines can be milled for high compression engines * Integral bosses can be drilled for fuel injection down nozzles * Intake runners can be ported to CNC ported to 250cc
Not Yet Reviewed
$1,634.35
Whether you're drag racing or running on Circle Tracks, you can trust the performance and strength of Pro-Filer small block Chevy All American Race Series cylinder heads. They're precision-cast from aerospace A356 aluminum alloy for excellent reliability, are designed with a solid rocker bar, and have 13 degree modified valve angles. These heads use 42cc heart-shaped combustion chambers and are available with as-cast 285cc or fully CNC machine-ported 300cc intake ports. They can use up to 2.200 in. intake and 1.600 in. exhaust valves while accepting up to 1.675 in. O.D. springs. With well over 400 cfm, Pro-Filer small block Chevy All American Race Series cylinder heads will lead the way. Additional features: * For 357 c.i.d. or larger engines * Valve guides available in either 5/16 in., 11/32 in., or a combination of the two * Available with or without valve job
Not Yet Reviewed
$1,973.83
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
