Availability
Ford Performance Parts guys live, eat, and sleep Ford. Their camshafts are designed for everything from mildly modified street rods to full-out drag racers. All Ford Performance Parts camshafts are designed for more power; with either improved low-to-mid rpm torque, or mid-to-high rpm horsepower. They're available in many different durations and valve lifts, in your choice of hydraulic, solid, or hydraulic roller lifter configurations. Depending on application, features may include: * More lift and duration * Available to work with stock pistons * No valve spring change required for some applications * Offered in grinds that provide noticeable power improvements with a lumpy idle while maintaining good drivability with manual transmissions * Also available as true street-strip camshafts that work best with manual transmissions or higher stall speed torque converters and high numerical rear-end gears * Offered in versions that work well with carburetors or mass air fuel injection
( 80 )
$1,503.99
—
$1,694.99
S&S Cycle Milwaukee 8 gear drive cam chest kits include everything necessary to convert to gear drive for improved cam timing accuracy and eliminate the stock cam chain tensioner. All parts in each kit are matched to ensure superior quality, fit, finish and performance. Each kit includes necessary gaskets, components, and hardware required for a complete installation. S&S gear drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed for your bike. Features of Milwaukee 8 gear drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee Pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improve tappet stability in high-lift situations * Outer drive gears included * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,599.95
—
$1,815.95
March Performance Ultra Style serpentine systems are designed to convert your standard V-belt pulleys to a single ribbed serpentine belt. The kits are available for Mopar, Chevy, Ford, Oldsmobile, Pontiac, and Buick engines—so they are likely to have your application covered. These systems include billet aluminum pulleys that are clear powdercoated, along with the correct brackets and mounting hardware. March Performance Ultra Style serpentine systems are available with or without power steering to suit your specific vehicle.
( 11 )
$1,547.99
Mopar Replacement offers crankshafts for a variety of applications—including Jeep, Chrysler, Ram, and Dodge vehicles; and Hemi Gen III and Gas/Electric hybrid V8 engines. The one-piece nodular iron replacements deliver the same fit and performance as the OE factory originals. Crankshafts are essentially the backbone of the internal combustion engine. They're responsible for the proper operation of the engine and converting a linear motion to a rotational motion. Order the model recommended for your Mopar.
Not Yet Reviewed
$1,688.99
S&S Cycle Super Stock cylinder head kits feature stock-appearing cylinder heads with improved performance. These heads work well with engines of stock displacement but are ideal for engines with a little larger stroke or bore. They are compatible with stock rocker boxes, intake manifolds, and exhaust. The S&S high-performance valve springs allow for camshafts with larger lifts. Super Stock aluminum cylinder head kits are available in multiple finishes depending on application and they contain all the parts needed for installation except where noted.
Not Yet Reviewed
$1,695.95
—
$1,999.95
Inspired by S&S Pro Stock drag race engines, S&S Cycle 4 in. Sidewinder big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing, or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 4 in. Sidewinder kits offer the biggest cylinder bore that can be installed in a stock crankcase without machining! Features: * Low-friction ductile cast iron liner * 10.5:1 compression * Bolts in with no machining, balancing, or splitting the crankcases * 88 in. engines are boosted to 100 in. * 96 in. and 103 in. engines are boosted to 110 in. * Complete kits include cylinders, pistons, gaskets, and instructions * Wrinkle black and silver cylinders that match stock finish
Not Yet Reviewed
$1,549.95
—
$1,594.95
S&S Cycle Super Stock alternator-style crankcases are perfect for stock replacement and high performance applications. Available in stock and different bore sizes, some are machined for the installation of a crank position sensor, but all are compatible with stock flywheel assemblies, primary covers, gear covers, and are clearanced for 38 amp alternator stators. Certain options may include the required hardware, fittings, and bearings, and may be offered in different finishes. Select the S&S Super Stock alternator-style crankcase designed for your motorcycle's engine.
Not Yet Reviewed
$1,617.95
—
$1,899.95
The S&S Cycle V111 cylinder kits are an exceptional choice for riders who choose to re-work their bikes for more power. This 4 1/8 in. bore cylinder and piston kit by S&S Cycle replaces the cylinders and pistons on early production S&S V111 engines for 1984-1999 Big Twins. With top-of-the-line components, the V111 cylinder kits include S&S 4 1/8 in. bore cylinders, forged pistons, rings, wrist pins, head and base gaskets. Pistons are flat topped design intended for use with S&S Super Stock cylinder heads. The cylinders are machined with the S&S bolt pattern and are intended for use in S&S crankcases used in early S&S V111 engines. Designed for 4 3/8 in. stroke flywheels, resulting in 111 in. displacement. For best performance expectations, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required.
Not Yet Reviewed
$1,525.95
—
$1,652.95
S&S Cycle offers several Super Stock cylinder heads to choose from for your motorcycle. They feature premium valves and high flowing ports to supply your engine with plenty of air, as well as high performance valve springs that may allow installation of cams with up to .650 in. of lift (depending upon cylinder heads chosen). Super Stock cylinder heads are also available in different finishes. Select the ones designed for your bike.
Not Yet Reviewed
$1,749.95
—
$1,999.95
S&S Cycle early Twin Cam gear drive cam chest replacement kits are designed to upgrade your early 1999-2006 Twin Cam to 2007-16 style camshafts and oil pump. Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. By eliminating the chains, gear drive camshafts keep the valve events at precise timing and free up parasitic loss. Order the kit recommended for your specific Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Inner and outer gear * Premium lifters * Quickee pushrods * Pushrod tubes * Available with or without gear drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,999.95
S&S Cycle Performance cylinder heads are replacements for Big Twin engines. Designed to be compatible with a stock-style flat topped piston, their larger than stock intake and exhaust valves provide plenty of air while maintaining port velocity for good low and midrange response, while the S&S high-lift valve springs allow the installation of cams with up to .585 in. lift. S&S Cycle Performance cylinder heads are compatible with stock intake manifolds, exhaust systems, and temperature sensors for EFI-equipped models. Select low or standard compression heads with a natural aluminum or wrinkle black powdercoat finish for your Big Twin engine. * Low compression sets have a slightly larger 82cc combustion chamber, making them ideal for larger displacement applications, producing a manageable compression ratio. These heads are original equipment on S&S V96 and V80 engines. * Standard compression sets have a 76cc combustion chamber that gives a slight increase in compression for great results with most performance cams.
Not Yet Reviewed
$1,553.95
—
$1,959.95
S&S Cycle's 111 in. Hot Set Up kits are tailored with the necessary components for your specific Harley-Davidson® model. Using this kit on the stock crankcases provides the benefit of significantly increasing your engine displacement and horsepower without requiring a complete engine rebuild. This allows you to maintain your original engine serial numbers while experiencing noticeable performance gains with a relatively simple installation process, all while utilizing your existing crankcases which can be cost-effective compared to a full engine replacement. After installation, proper tuning on a dyno is recommended to optimize engine performance.
Not Yet Reviewed
$1,534.95
S&S Cycle 117 in. big bore kits are a popular choice for riders looking to upgrade their engine power without major modifications. Available for a variety of Harley-Davidson® motorcycles, each kit is tailored with the necessary components for your specific HD® model. Many kits come with a powdercoat finish that can match the stock engine look to maintain a clean aesthetic. Using one of S&S Cycle's big bore kits can provide significant benefits like a noticeable increase in horsepower and torque due to the larger engine displacement, relatively easy installation with minimal machine work required, a quality build with durable components, and a good balance of performance and reliability. For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required. Although not mandatory, S&S Cycle recommends adding an oil cooler to bikes ridden in warmer climates. Select the S&S Cycle big bore kit designed for your application needs.
Not Yet Reviewed
$1,595.95
—
$1,599.95
S&S Cycle 124 in. (standard compression) Hot Set-Up cylinder kits package pistons and cylinders for use as replacements or as the basis for a new engine build. The pistons are a flat dome design, and the cylinders are machined with the stock bolt pattern intended for use in stock crankcases. Select the appropriate kit for your Big Twin. S&S cylinder and piston kit contents and notes: * S&S 4 1/8 in. bore cylinders -- Durable wrinkle black powdercoat finish * Forged flat domed pistons, rings, wrist pins * Head and base gaskets * Designed for 4 5/8 in. flywheels, resulting in 124 in. displacement * Cylinders can be used with stock or S&S cylinder heads with stock bolt pattern
Not Yet Reviewed
$1,595.95
—
$1,679.95
S&S Cycle 124 in. low compression Hot Set-Up cylinder kits package a piston kit with cylinders for Big Twin engines with stock cylinder heads. The pistons are a dished dome design and the cylinders are machined with the stock bolt pattern intended for use in stock crankcases. Select the appropriate kit for your Big Twin. S&S cylinder and piston kit contents and notes: * S&S 4 1/8 in. bore cylinders -- Durable wrinkle black powdercoat finish * Forged pistons, rings, wrist pins * Head and base gaskets * Designed for 4 5/8 in. stroke flywheels, resulting in 124 in. displacement
Not Yet Reviewed
$1,595.95
The S&S Cycle V117 cylinder kits are an exceptional choice for riders who choose to re-work their bikes for more power. This 4 1/8 in. bore cylinder and piston kit by S&S Cycle replaces the cylinders and pistons on early production S&S V117 engines for 1984-1999 Big Twins. With top-of-the-line components, the V117 cylinder kits include S&S 4 1/8 in. bore cylinders, forged pistons, rings, wrist pins, head and base gaskets. Pistons are flat topped design intended for use with S&S Super Stock cylinder heads. The cylinders are machined with the S&S bolt pattern and are intended for use in S&S crankcases used in early S&S V117 engines. Designed for 4 3/8 in. stroke flywheels, resulting in 117 in. displacement. For best performance expectations, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required.
Not Yet Reviewed
$1,514.95
The T124 cylinder kits from S&S Cycle are an exceptional choice for riders who choose to re-work their bikes for more power. This 4 1/8 in. bore cylinder and piston kit replaces the cylinders and pistons on early production S&S T124 engines for 1999-2006 Big Twins. The T124 cylinder kits include top-of-the-line components: S&S 4 1/8 in. bore cylinders, forged pistons, rings, wrist pins, head and base gaskets. Pistons are flat topped design intended for use with S&S Super Stock cylinder heads. The cylinders are machined with the S&S bolt pattern and are intended for use in S&S crankcases used in early S&S T124 engines. Designed for 4 3/8 in. stroke flywheels, resulting in 124 in. displacement. For best performance expectations, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required.
Not Yet Reviewed
$1,587.95
The S&S Cycle V124 cylinder kits are an exceptional choice for riders who choose to re-work their bikes for more power. This 4 1/8 in. bore cylinder and piston kit by S&S Cycle replaces the cylinders and pistons on early production S&S V124 engines for 1984-1999 Big Twins. With top-of-the-line components, the V124 cylinder kits include S&S 4 1/8 in. bore cylinders, forged pistons, rings, wrist pins, head and base gaskets. Pistons are flat topped design intended for use with S&S Super Stock cylinder heads. The cylinders are machined with the S&S bolt pattern and are intended for use in S&S crankcases used in early S&S V124 engines. Designed for 4 3/8 in. stroke flywheels, resulting in 124 in. displacement. For best performance expectations, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required.
Not Yet Reviewed
$1,525.95
—
$1,611.95
S&S is one of the most trusted names within the community of riders who choose to re-work their bikes for more power. The S&S Cycle T111 cylinder kits are an exceptional choice for upgrading your Twin Cam powered bike, delivering an economical and efficient route to enhanced performance. These kits are intended for replacing the cylinders and pistons on early production S&S T111 engines for 1999-2006 Big Twins. The kits contain top-of-the-line components such as S&S 4 1/8 in. bore cylinders, forged pistons, rings, wrist pins, head and base gaskets. Pistons are flat topped design intended for use with S&S Super Stock cylinder heads. The cylinders are machined with the S&S bolt pattern and are intended for use in S&S crankcases used in early S&S T111 engines. Designed for 4 1/8 in. stroke flywheels, resulting in 111 in. displacement. Cylinder available in either a silver or a durable wrinkle black powdercoat finish. For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required.
Not Yet Reviewed
$1,611.95
S&S Cycle's T117 cylinder kits are an exceptional choice for riders who choose to re-work their bikes for more power. This 4 1/8 in. bore cylinder and piston kit replaces the cylinders and pistons on early production S&S T117 engines for 1999-2006 Big Twins. With top-of-the-line components, these S&S Cycle T117 cylinder kits contain the following: S&S 4 1/8 in. bore cylinders, forged pistons, rings, wrist pins, head and base gaskets. Pistons are flat topped design intended for use with S&S Super Stock cylinder heads. The cylinders are machined with the S&S bolt pattern and are intended for use in S&S crankcases used in early S&S T117 engines. Designed for 4 3/8 in. stroke flywheels, resulting in 117 in. displacement. For best performance expectations, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required.
Not Yet Reviewed
$1,699.95
Why put your bike engine back together with stock parts—when you can upgrade with one of the S&S Cycle flywheel assemblies? These 3-piece units are forged and heat-treated from 4140 steel, making them harder and stronger than stock. They're precision-machined to be truer (for less vibration), and are assembled with integral mainshafts and lightweight connecting rod forgings. Stock flywheels shift out of true under heavy loads; improve your motorcycle with an S&S Cycle flywheel assembly.
Not Yet Reviewed
$1,713.95
—
$1,744.95
On Sale
COMP Cams Thumpr NSR Ford Coyote 5.0 modular 4V camshafts present big power gains, along with the distinctive Thumpr idle lope—and you don't need to upgrade the valve springs. Ford 5.0L modular 4-valve V8 engines have become hugely popular, so how do you improve upon already great performance? With a camshaft from the COMP Cams family of Thumpr NSR camshafts! Choose the cam model (Thumpr or Mutha' Thumpr) designed for your vehicle and engine application. Features include: * Brings legendary Thumpr sound to the 5.0 Coyote * Optimized lobe profiles for increased airflow and exhaust efficiency * Big performance gains in mid- to upper-rpm range * Valve spring upgrade not required * One-piece billet steel construction * Compatible with N/A and supercharged applications
Not Yet Reviewed
$2,013.95
$1,812.56
COMP Cams is bringing the musclecar sound back, and it's nastier than ever! Few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound that you demand, COMP Cams' engineering team proudly introduces the Thumpr Series hydraulic roller cam and lifter kits. They are designed for use in engines that were originally equipped with flat tappet camshafts. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap. They're designed to maximize the rough-idling characteristics of the cams, giving you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. They are available in three different grind profiles. Each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits feature a cutting-edge hydraulic roller design that delivers a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 17 )
$1,545.95
—
$1,676.95
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 388 )
$1,546.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
